linux-stable.git/drivers/gpio/Makefile, branch linux-4.5.y

Merge tag 'armsoc-multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2016-01-21T02:03:56+00:00

Pull ARM SoC multiplatform code updates from Arnd Bergmann:
 "This branch is the culmination of 5 years of effort to bring the ARMv6
  and ARMv7 platforms together such that they can all be enabled and
  boot the same kernel.  It has been a tremendous amount of cleanup and
  refactoring by a huge number of people, and creation of several new
  (and major) subsystems to better abstract out all the platform details
  in an appropriate manner.

  The bulk of this branch is a large patchset from Arnd that brings
  several of the more minor and older platforms we have closer to
  multiplatform support.  Among these are MMP, S3C64xx, Orion5x, mv78xx0
  and realview Much of this is moving around header files from old mach
  directories, but there are also some cleanup patches of debug_ll
  (lowlevel debug per-platform options) and other parts.

  Linus Walleij also has some patchs to clean up the older ARM Realview
  platforms by finally introducing DT support, and Rob Herring has some
  for ARM Versatile which is now DT-only.  Both of these platforms are
  now multiplatform.

  Finally, a couple of patches from Russell for Dove PMU, and a fix from
  Valentin Rothberg for Exynos ADC, which were rebased on top of the
  series to avoid conflicts"

* tag 'armsoc-multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (75 commits)
  ARM: realview: don't select SMP_ON_UP for UP builds
  ARM: s3c: simplify s3c_irqwake_{e,}intallow definition
  ARM: s3c64xx: fix pm-debug compilation
  iio: exynos-adc: fix irqf_oneshot.cocci warnings
  ARM: realview: build realview-dt SMP support only when used
  ARM: realview: select apropriate targets
  ARM: realview: clean up header files
  ARM: realview: make all header files local
  ARM: no longer make CPU targets visible separately
  ARM: integrator: use explicit core module options
  ARM: realview: enable multiplatform
  ARM: make default platform work for NOMMU
  ARM: debug-ll: move DEBUG_LL_UART_EFM32 to correct Kconfig location
  ARM: defconfig: use correct debug_ll settings
  ARM: versatile: convert to multi-platform
  ARM: versatile: merge mach code into a single file
  ARM: versatile: switch to DT only booting and remove legacy code
  ARM: versatile: add DT based PCI detection
  ARM: pxa: mark ezx structures as __maybe_unused
  ARM: pxa: mark raumfeld init functions as __maybe_unused
  ...

gpio: samsung: move gpio-samsung driver back to platform code

2015-12-01T20:50:24+00:00

The gpio-samsung driver is special in the sense that it
interacts directly in multiple ways with the legacy platform
code for the s3c24xx and s3c64xx platforms. In contrast,
all devicetree based machines for Samsung, including the
ones on those two SoC families use a different driver.

The header files that define the interface between the platform
code and the gpio driver are not visible when building a
kernel for ARCH_MULTIPLATFORM, which prevents us from
turning on this option for s3c64xx.

To work around this, we now move the driver back into platform
code, from where it was originally moved to as part of commit
1b39d5f2cc5c28 ("gpio/samsung: gpio-samsung.c to support
Samsung GPIOs").

The long-term plan for this driver would be to remove it
entirely, after all Samsung machines have been converted
over to boot from DT, but there is currently no timeline
for when that might happen.

Signed-off-by: Arnd Bergmann 
Reviewed-by: Krzysztof Kozlowski

gpio: Add GPIO support for the ACCES 104-IDI-48

2015-12-01T08:56:36+00:00

The ACCES 104-IDI-48 family of PC/104 utility boards feature 48
individually optically isolated digital inputs. Enabled inputs feature
change-of-state detection capability; if change-of-state detection is
enabled, an interrupt is fired off if a change of input level
(low-to-high or high-to-low) is detected. Change-of-state IRQs are
enabled/disabled on 8-bit boundaries, for a total of six boundaries.

This driver provides GPIO and IRQ support for these 48 channels of
digital input. The base port address for the device may be configured
via the idi_48_base module parameter. The interrupt line number for the
device may be configured via the idi_48_irq module parameter.

Signed-off-by: William Breathitt Gray 
Signed-off-by: Linus Walleij

gpio: Add GPIO support for the ACCES 104-IDIO-16

2015-10-27T10:01:19+00:00

The ACCES 104-IDIO-16 family of PC/104 utility boards feature 16
optically isolated inputs and 16 optically isolated FET solid state
outputs. This driver provides GPIO support for these 32 channels of
digital I/O. Change-of-State detection interrupts are not supported.

GPIO 0-15 correspond to digital outputs 0-15, while GPIO 16-31
correspond to digital inputs 0-15. The base port address for the device
may be set via the idio_16_base module parameter.

Signed-off-by: William Breathitt Gray 
Signed-off-by: Linus Walleij

gpio: driver for AMD Promontory

2015-10-26T13:45:26+00:00

This patch adds a new GPIO driver for AMD Promontory chip.

This GPIO controller is enumerated by ACPI and the ACPI compliant
hardware ID is AMDF030.

Change history:

v2: 1. fix coding style
    2. registers renaming
v3: 1. change include file
    2. fix coding style
    3. remove module_init/exit, add module_platform_driver
    4. remove MODULE_ALIAS
v4: 1. change TOTAL_GPIO_PINS to PT_TOTAL_GPIO
    2. remove PCI dependency in Kconfig
    3. fix subject line

Signed-off-by: YD Tseng 
Signed-off-by: Linus Walleij

gpio: add GPIO support for IT87xx, replacing gpio-it8761e

2015-10-02T11:19:35+00:00

This patch adds support for the GPIOs found on the ITE super-I/O chips
IT87xx.

Signed-off-by: Diego Elio Pettenò 
Signed-off-by: Christophe Vu-Brugier 
Signed-off-by: Linus Walleij

gpio: msm: Remove unused driver

2015-10-02T11:19:33+00:00

Remove this driver now that Bjorn has introduced a pinctrl driver
for msm8660 and the dts files have been updated with the pinctrl
compatibles.

Cc: Andy Gross 
Reviewed-by: Bjorn Andersson 
Signed-off-by: Stephen Boyd 
Signed-off-by: Linus Walleij

Merge tag 'gpio-v4.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

2015-09-04T17:07:45+00:00

Pull GPIO updates from Linus Walleij:
 "This is the bulk of GPIO changes for the v4.3 kernel cycle.

  There is quite a lot going on in the GPIO subsystem this merge window,
  so the main matter is decribed below.

  The hits in other subsystems when making the GPIO flags optional are
  all ACKed by their respective subsystem maintainers.

  Core changes:

   - Root out the wrapper devm_gpiod_get() and gpiod_get() etc versions
     of the descriptor calls that did not use the flags argument on the
     end.  This was around for too long and eventually Uwe Kleine-König
     took the time to clean it out and the last users are removed along
     with the macros in this tag.  In several cases the use of flags
     simplifies the code.  For this reason we have (ACKed) patches
     hitting in DRM, IIO, media, NFC, USB+PHY up until we hammer in the
     nail with removing the macros.

   - Add a fat document describing how much ready-made GPIO stuff we
     have i the kernel to discourage people from reinventing a square
     wheel in userspace, as so often happens.

   - Create a separate lockdep class for each instance of a GPIO IRQ
     chip instead of using one class for all chips, as the current code
     will not work with systems with several GPIO chips doing lockdep
     debugging.

   - Protect against driver unloading also when a GPIO line is only used
     as IRQ for the GPIOLIB_IRQCHIP helpers.

   - If the GPIO chip has no designated owner, assign the parent device
     driver owner as owner.

   - Consolidation of chained IRQ handler install/remove replacing all
     call sites where irq_set_handler_data() and
     irq_set_chained_handler() were done in succession with a combined
     call to irq_set_chained_handler_and_data().

     This series was created by Thomas Gleixner after the problem was
     observed by Russell King.

   - Tglx also made another series of patches switching
     __irq_set_handler_locked() for irq_set_handler_locked() which is
     way cleaner.

   - Tglx and Jiang Liu wrote a good bunch of patches to make use of
     irq_desc_get_xxx() accessors and avoid looking up irq_descs from
     IRQ numbers.  The goal is to get rid of the irq number from the
     handlers in the IRQ flow which is nice.

   - Rob Herring killed off the set_irq_flags() for all GPIO drivers.
     This was an ARM specific function that is replaced with the generic
     irq_modify_status() where special flags are actually needed.

   - When an OF node has a pin range for its GPIOs, return -EPROBE_DEFER
     if the pin controller isn't available.  Pretty logical, yet needed
     to be fixed.

   - If a driver using GPIOLIB_IRQCHIP has its own irq_*_resources call
     back, then call these instead of the defaults provided by the
     GPIOLIB.

   - Fix an undocumented ABI hole: named GPIOs were not properly
     documented.

  Driver improvements:

   - Add get_direction() support to the generic GPIO driver, it's
     strange that we didn't have that before.

   - Make it possible to have input-only GPIO chips using the generic
     GPIO driver.

   - Clean out platform data support from the Emma Mobile (EM) driver

   - Finegrained runtime PM support for the RCAR driver.

   - Support r8a7795 (R-car H3) in the RCAR driver.

   - Support interrupts on GPIOs 16 thru 31 in the DaVinci driver.

   - Some consolidation and new support in the MPC8xxx driver, we now
     support MPC5125.

   - Preempt-RT-friendly patches: the OMAP, MPC8xxx, drivers uses raw
     spinlocks making it work better with the realime patches.

   - Interrupt support for the EXTRAXFS GPIO driver.

   - Make the ETRAXFS GPIO driver support also ARTPEC-3.

   - Interrupt and wakeup support for the BRCMSTB driver, also for
     wakeup from S5 cold boot.

   - Mask MXC IRQs during suspend.

   - Improve OMAP2 GPIO set_debounce() to work according to spec.

   - The VF610 driver handles IRQs properly.

  New drivers:

   - ZTE ZX GPIO driver"

* tag 'gpio-v4.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (87 commits)
  Revert "gpio: extraxfs: fix returnvar.cocci warnings"
  gpio: tc3589x: use static container helper
  gpio: xlp: fix error return code
  gpio: vf610: handle level IRQ's properly
  gpio: max732x: Fix error handling in probe()
  gpio: omap: fix clk_prepare/unprepare usage
  gpio: omap: protect regs access in omap_gpio_irq_handler
  gpio: omap: fix omap2_set_gpio_debounce
  gpio: omap: switch to use platform_get_irq
  gpio: omap: remove wrong irq_domain_remove usage in probe
  gpiolib: add description for gpio irqchip fields in struct gpio_chip
  gpio: extraxfs: fix returnvar.cocci warnings
  gpiolib: irqchip: use different lockdep class for each gpio irqchip
  gpio/grgpio: fix deadlock in grgpio_irq_unmap()
  Documentation: gpio: consumer: describe active low property
  gpio: mxc: fix section mismatch warning
  gpio/mxc: mask gpio interrupts in suspend
  gpio: omap: Fix missing raw locks conversion
  gpio: brcmstb: support wakeup from S5 cold boot
  gpio: brcmstb: Add interrupt and wakeup source support
  ...

MIPS: ath79: Move the GPIO driver to drivers/gpio

2015-09-03T10:08:02+00:00

GPIO drivers should be in drivers/gpio

Signed-off-by: Alban Bedel 
Acked-by: Linus Walleij 
Cc: linux-gpio@vger.kernel.org
Cc: Alexandre Courbot 
Cc: Gabor Juhos 
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/10597/
Signed-off-by: Ralf Baechle

gpio: zx: Add ZTE zx296702 GPIO support

2015-07-16T08:14:45+00:00

Add ZTE zx296702 GPIO controller support

Signed-off-by: Jun Nie 
Acked-by: Shawn Guo 
Signed-off-by: Linus Walleij