linux-stable.git/drivers/firmware, branch v6.2.9 Linux kernel stable tree firmware: arm_scmi: Fix device node validation for mailbox transport 2023-03-30T10:51:41+00:00 Cristian Marussi cristian.marussi@arm.com 2023-03-07T16:23:24+00:00 42579bbd87b03558532f95ba3a225c862a0c9823 commit 2ab4f4018cb6b8010ca5002c3bdc37783b5d28c2 upstream. When mailboxes are used as a transport it is possible to setup the SCMI transport layer, depending on the underlying channels configuration, to use one or two mailboxes, associated, respectively, to one or two, distinct, shared memory areas: any other combination should be treated as invalid. Add more strict checking of SCMI mailbox transport device node descriptors. Fixes: 5c8a47a5a91d ("firmware: arm_scmi: Make scmi core independent of the transport type") Cc: <stable@vger.kernel.org> # 4.19 Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Link: https://lore.kernel.org/r/20230307162324.891866-1-cristian.marussi@arm.com Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 2ab4f4018cb6b8010ca5002c3bdc37783b5d28c2 upstream.

When mailboxes are used as a transport it is possible to setup the SCMI
transport layer, depending on the underlying channels configuration, to use
one or two mailboxes, associated, respectively, to one or two, distinct,
shared memory areas: any other combination should be treated as invalid.

Add more strict checking of SCMI mailbox transport device node descriptors.

Fixes: 5c8a47a5a91d ("firmware: arm_scmi: Make scmi core independent of the transport type")
Cc: <stable@vger.kernel.org> # 4.19
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20230307162324.891866-1-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
efi/libstub: zboot: Mark zboot EFI application as NX compatible 2023-03-30T10:51:34+00:00 Ard Biesheuvel ardb@kernel.org 2023-03-10T11:15:24+00:00 b065b01e32a0f5481534b1fd5a97f37e8c2ed90f commit c7d9e628b8ff4d52a365a441bdacb3209ee83c81 upstream. Now that the zboot loader will invoke the EFI memory attributes protocol to remap the decompressed code and rodata as read-only/executable, we can set the PE/COFF header flag that indicates to the firmware that the application does not rely on writable memory being executable at the same time. Cc: <stable@vger.kernel.org> # v6.2+ Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit c7d9e628b8ff4d52a365a441bdacb3209ee83c81 upstream.

Now that the zboot loader will invoke the EFI memory attributes protocol
to remap the decompressed code and rodata as read-only/executable, we
can set the PE/COFF header flag that indicates to the firmware that the
application does not rely on writable memory being executable at the
same time.

Cc: <stable@vger.kernel.org> # v6.2+
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
efi: sysfb_efi: Fix DMI quirks not working for simpledrm 2023-03-30T10:51:34+00:00 Hans de Goede hdegoede@redhat.com 2023-03-14T12:31:02+00:00 d34aae65bcaf8481a8a92c922f527cecff0f7435 commit 3615c78673c332b69aaacefbcde5937c5c706686 upstream. Commit 8633ef82f101 ("drivers/firmware: consolidate EFI framebuffer setup for all arches") moved the sysfb_apply_efi_quirks() call in sysfb_init() from before the [sysfb_]parse_mode() call to after it. But sysfb_apply_efi_quirks() modifies the global screen_info struct which [sysfb_]parse_mode() parses, so doing it later is too late. This has broken all DMI based quirks for correcting wrong firmware efifb settings when simpledrm is used. To fix this move the sysfb_apply_efi_quirks() call back to its old place and split the new setup of the efifb_fwnode (which requires the platform_device) into its own function and call that at the place of the moved sysfb_apply_efi_quirks(pd) calls. Fixes: 8633ef82f101 ("drivers/firmware: consolidate EFI framebuffer setup for all arches") Cc: stable@vger.kernel.org Cc: Javier Martinez Canillas <javierm@redhat.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 3615c78673c332b69aaacefbcde5937c5c706686 upstream.

Commit 8633ef82f101 ("drivers/firmware: consolidate EFI framebuffer setup
for all arches") moved the sysfb_apply_efi_quirks() call in sysfb_init()
from before the [sysfb_]parse_mode() call to after it.
But sysfb_apply_efi_quirks() modifies the global screen_info struct which
[sysfb_]parse_mode() parses, so doing it later is too late.

This has broken all DMI based quirks for correcting wrong firmware efifb
settings when simpledrm is used.

To fix this move the sysfb_apply_efi_quirks() call back to its old place
and split the new setup of the efifb_fwnode (which requires
the platform_device) into its own function and call that at
the place of the moved sysfb_apply_efi_quirks(pd) calls.

Fixes: 8633ef82f101 ("drivers/firmware: consolidate EFI framebuffer setup for all arches")
Cc: stable@vger.kernel.org
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
efi/libstub: Use relocated version of kernel's struct screen_info 2023-03-30T10:51:23+00:00 Ard Biesheuvel ardb@kernel.org 2023-03-22T00:11:18+00:00 fba8ad68b96aecc0fcb461be1c940157af86af7d [ Upstream commit fc3608aaa5751318837e4bbe0282b3836bca5080 ] In some cases, we expose the kernel's struct screen_info to the EFI stub directly, so it gets populated before even entering the kernel. This means the early console is available as soon as the early param parsing happens, which is nice. It also means we need two different ways to pass this information, as this trick only works if the EFI stub is baked into the core kernel image, which is not always the case. Huacai reports that the preparatory refactoring that was needed to implement this alternative method for zboot resulted in a non-functional efifb earlycon for other cases as well, due to the reordering of the kernel image relocation with the population of the screen_info struct, and the latter now takes place after copying the image to its new location, which means we copy the old, uninitialized state. So let's ensure that the same-image version of alloc_screen_info() produces the correct screen_info pointer, by taking the displacement of the loaded image into account. Reported-by: Huacai Chen <chenhuacai@loongson.cn> Tested-by: Huacai Chen <chenhuacai@loongson.cn> Link: https://lore.kernel.org/linux-efi/20230310021749.921041-1-chenhuacai@loongson.cn/ Fixes: 42c8ea3dca094ab8 ("efi: libstub: Factor out EFI stub entrypoint into separate file") Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit fc3608aaa5751318837e4bbe0282b3836bca5080 ]

In some cases, we expose the kernel's struct screen_info to the EFI stub
directly, so it gets populated before even entering the kernel.  This
means the early console is available as soon as the early param parsing
happens, which is nice. It also means we need two different ways to pass
this information, as this trick only works if the EFI stub is baked into
the core kernel image, which is not always the case.

Huacai reports that the preparatory refactoring that was needed to
implement this alternative method for zboot resulted in a non-functional
efifb earlycon for other cases as well, due to the reordering of the
kernel image relocation with the population of the screen_info struct,
and the latter now takes place after copying the image to its new
location, which means we copy the old, uninitialized state.

So let's ensure that the same-image version of alloc_screen_info()
produces the correct screen_info pointer, by taking the displacement of
the loaded image into account.

Reported-by: Huacai Chen <chenhuacai@loongson.cn>
Tested-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://lore.kernel.org/linux-efi/20230310021749.921041-1-chenhuacai@loongson.cn/
Fixes: 42c8ea3dca094ab8 ("efi: libstub: Factor out EFI stub entrypoint into separate file")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
arm64: efi: Use SMBIOS processor version to key off Ampere quirk 2023-03-30T10:50:54+00:00 Ard Biesheuvel ardb@kernel.org 2023-02-28T16:00:49+00:00 b824efafca6739f6c80d22d88a83e6545114ed8e [ Upstream commit eb684408f3ea4856639675d6465f0024e498e4b1 ] Instead of using the SMBIOS type 1 record 'family' field, which is often modified by OEMs, use the type 4 'processor ID' and 'processor version' fields, which are set to a small set of probe-able values on all known Ampere EFI systems in the field. Fixes: 550b33cfd4452968 ("arm64: efi: Force the use of ...") Tested-by: Andrea Righi <andrea.righi@canonical.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit eb684408f3ea4856639675d6465f0024e498e4b1 ]

Instead of using the SMBIOS type 1 record 'family' field, which is often
modified by OEMs, use the type 4 'processor ID' and 'processor version'
fields, which are set to a small set of probe-able values on all known
Ampere EFI systems in the field.

Fixes: 550b33cfd4452968 ("arm64: efi: Force the use of ...")
Tested-by: Andrea Righi <andrea.righi@canonical.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
efi/libstub: smbios: Use length member instead of record struct size 2023-03-30T10:50:53+00:00 Ard Biesheuvel ardb@kernel.org 2023-02-28T18:23:09+00:00 8079377656abe43b9802800de42419685f5ee61a [ Upstream commit 34343eb06afc04af9178a9883d9354dc12beede0 ] The type 1 SMBIOS record happens to always be the same size, but there are other record types which have been augmented over time, and so we should really use the length field in the header to decide where the string table starts. Fixes: 550b33cfd4452968 ("arm64: efi: Force the use of ...") Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 34343eb06afc04af9178a9883d9354dc12beede0 ]

The type 1 SMBIOS record happens to always be the same size, but there
are other record types which have been augmented over time, and so we
should really use the length field in the header to decide where the
string table starts.

Fixes: 550b33cfd4452968 ("arm64: efi: Force the use of ...")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
efi: earlycon: Reprobe after parsing config tables 2023-03-30T10:50:50+00:00 Ard Biesheuvel ardb@kernel.org 2023-03-12T22:00:03+00:00 fdf7c1b9ccf2f5a2c34b703fd0325a9e5aaabc4a [ Upstream commit 8b3a149db461d3286d1e211112de3b44ccaeaf71 ] Commit 732ea9db9d8a ("efi: libstub: Move screen_info handling to common code") reorganized the earlycon handling so that all architectures pass the screen_info data via a EFI config table instead of populating struct screen_info directly, as the latter is only possible when the EFI stub is baked into the kernel (and not into the decompressor). However, this means that struct screen_info may not have been populated yet by the time the earlycon probe takes place, and this results in a non-functional early console. So let's probe again right after parsing the config tables and populating struct screen_info. Note that this means that earlycon output starts a bit later than before, and so it may fail to capture issues that occur while doing the early EFI initialization. Fixes: 732ea9db9d8a ("efi: libstub: Move screen_info handling to common code") Reported-by: Shawn Guo <shawn.guo@linaro.org> Tested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 8b3a149db461d3286d1e211112de3b44ccaeaf71 ]

Commit 732ea9db9d8a ("efi: libstub: Move screen_info handling to common
code") reorganized the earlycon handling so that all architectures pass
the screen_info data via a EFI config table instead of populating struct
screen_info directly, as the latter is only possible when the EFI stub
is baked into the kernel (and not into the decompressor).

However, this means that struct screen_info may not have been populated
yet by the time the earlycon probe takes place, and this results in a
non-functional early console.

So let's probe again right after parsing the config tables and
populating struct screen_info. Note that this means that earlycon output
starts a bit later than before, and so it may fail to capture issues
that occur while doing the early EFI initialization.

Fixes: 732ea9db9d8a ("efi: libstub: Move screen_info handling to common code")
Reported-by: Shawn Guo <shawn.guo@linaro.org>
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
firmware: xilinx: don't make a sleepable memory allocation from an atomic context 2023-03-22T12:37:58+00:00 Roman Gushchin roman.gushchin@linux.dev 2023-03-08T22:26:02+00:00 9bbab2843f2d1337a268499a1c02b435d2985a17 commit 38ed310c22e7a0fc978b1f8292136a4a4a8b3051 upstream. The following issue was discovered using lockdep: [ 6.691371] BUG: sleeping function called from invalid context at include/linux/sched/mm.h:209 [ 6.694602] in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 1, name: swapper/0 [ 6.702431] 2 locks held by swapper/0/1: [ 6.706300] #0: ffffff8800f6f188 (&dev->mutex){....}-{3:3}, at: __device_driver_lock+0x4c/0x90 [ 6.714900] #1: ffffffc009a2abb8 (enable_lock){....}-{2:2}, at: clk_enable_lock+0x4c/0x140 [ 6.723156] irq event stamp: 304030 [ 6.726596] hardirqs last enabled at (304029): [<ffffffc008d17ee0>] _raw_spin_unlock_irqrestore+0xc0/0xd0 [ 6.736142] hardirqs last disabled at (304030): [<ffffffc00876bc5c>] clk_enable_lock+0xfc/0x140 [ 6.744742] softirqs last enabled at (303958): [<ffffffc0080904f0>] _stext+0x4f0/0x894 [ 6.752655] softirqs last disabled at (303951): [<ffffffc0080e53b8>] irq_exit+0x238/0x280 [ 6.760744] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G U 5.15.36 #2 [ 6.768048] Hardware name: xlnx,zynqmp (DT) [ 6.772179] Call trace: [ 6.774584] dump_backtrace+0x0/0x300 [ 6.778197] show_stack+0x18/0x30 [ 6.781465] dump_stack_lvl+0xb8/0xec [ 6.785077] dump_stack+0x1c/0x38 [ 6.788345] ___might_sleep+0x1a8/0x2a0 [ 6.792129] __might_sleep+0x6c/0xd0 [ 6.795655] kmem_cache_alloc_trace+0x270/0x3d0 [ 6.800127] do_feature_check_call+0x100/0x220 [ 6.804513] zynqmp_pm_invoke_fn+0x8c/0xb0 [ 6.808555] zynqmp_pm_clock_getstate+0x90/0xe0 [ 6.813027] zynqmp_pll_is_enabled+0x8c/0x120 [ 6.817327] zynqmp_pll_enable+0x38/0xc0 [ 6.821197] clk_core_enable+0x144/0x400 [ 6.825067] clk_core_enable+0xd4/0x400 [ 6.828851] clk_core_enable+0xd4/0x400 [ 6.832635] clk_core_enable+0xd4/0x400 [ 6.836419] clk_core_enable+0xd4/0x400 [ 6.840203] clk_core_enable+0xd4/0x400 [ 6.843987] clk_core_enable+0xd4/0x400 [ 6.847771] clk_core_enable+0xd4/0x400 [ 6.851555] clk_core_enable_lock+0x24/0x50 [ 6.855683] clk_enable+0x24/0x40 [ 6.858952] fclk_probe+0x84/0xf0 [ 6.862220] platform_probe+0x8c/0x110 [ 6.865918] really_probe+0x110/0x5f0 [ 6.869530] __driver_probe_device+0xcc/0x210 [ 6.873830] driver_probe_device+0x64/0x140 [ 6.877958] __driver_attach+0x114/0x1f0 [ 6.881828] bus_for_each_dev+0xe8/0x160 [ 6.885698] driver_attach+0x34/0x50 [ 6.889224] bus_add_driver+0x228/0x300 [ 6.893008] driver_register+0xc0/0x1e0 [ 6.896792] __platform_driver_register+0x44/0x60 [ 6.901436] fclk_driver_init+0x1c/0x28 [ 6.905220] do_one_initcall+0x104/0x590 [ 6.909091] kernel_init_freeable+0x254/0x2bc [ 6.913390] kernel_init+0x24/0x130 [ 6.916831] ret_from_fork+0x10/0x20 Fix it by passing the GFP_ATOMIC gfp flag for the corresponding memory allocation. Fixes: acfdd18591ea ("firmware: xilinx: Use hash-table for api feature check") Cc: stable <stable@kernel.org> Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev> Cc: Amit Sunil Dhamne <amit.sunil.dhamne@xilinx.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Link: https://lore.kernel.org/r/20230308222602.123866-1-roman.gushchin@linux.dev Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 38ed310c22e7a0fc978b1f8292136a4a4a8b3051 upstream.

The following issue was discovered using lockdep:
[    6.691371] BUG: sleeping function called from invalid context at include/linux/sched/mm.h:209
[    6.694602] in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 1, name: swapper/0
[    6.702431] 2 locks held by swapper/0/1:
[    6.706300]  #0: ffffff8800f6f188 (&dev->mutex){....}-{3:3}, at: __device_driver_lock+0x4c/0x90
[    6.714900]  #1: ffffffc009a2abb8 (enable_lock){....}-{2:2}, at: clk_enable_lock+0x4c/0x140
[    6.723156] irq event stamp: 304030
[    6.726596] hardirqs last  enabled at (304029): [<ffffffc008d17ee0>] _raw_spin_unlock_irqrestore+0xc0/0xd0
[    6.736142] hardirqs last disabled at (304030): [<ffffffc00876bc5c>] clk_enable_lock+0xfc/0x140
[    6.744742] softirqs last  enabled at (303958): [<ffffffc0080904f0>] _stext+0x4f0/0x894
[    6.752655] softirqs last disabled at (303951): [<ffffffc0080e53b8>] irq_exit+0x238/0x280
[    6.760744] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G     U            5.15.36 #2
[    6.768048] Hardware name: xlnx,zynqmp (DT)
[    6.772179] Call trace:
[    6.774584]  dump_backtrace+0x0/0x300
[    6.778197]  show_stack+0x18/0x30
[    6.781465]  dump_stack_lvl+0xb8/0xec
[    6.785077]  dump_stack+0x1c/0x38
[    6.788345]  ___might_sleep+0x1a8/0x2a0
[    6.792129]  __might_sleep+0x6c/0xd0
[    6.795655]  kmem_cache_alloc_trace+0x270/0x3d0
[    6.800127]  do_feature_check_call+0x100/0x220
[    6.804513]  zynqmp_pm_invoke_fn+0x8c/0xb0
[    6.808555]  zynqmp_pm_clock_getstate+0x90/0xe0
[    6.813027]  zynqmp_pll_is_enabled+0x8c/0x120
[    6.817327]  zynqmp_pll_enable+0x38/0xc0
[    6.821197]  clk_core_enable+0x144/0x400
[    6.825067]  clk_core_enable+0xd4/0x400
[    6.828851]  clk_core_enable+0xd4/0x400
[    6.832635]  clk_core_enable+0xd4/0x400
[    6.836419]  clk_core_enable+0xd4/0x400
[    6.840203]  clk_core_enable+0xd4/0x400
[    6.843987]  clk_core_enable+0xd4/0x400
[    6.847771]  clk_core_enable+0xd4/0x400
[    6.851555]  clk_core_enable_lock+0x24/0x50
[    6.855683]  clk_enable+0x24/0x40
[    6.858952]  fclk_probe+0x84/0xf0
[    6.862220]  platform_probe+0x8c/0x110
[    6.865918]  really_probe+0x110/0x5f0
[    6.869530]  __driver_probe_device+0xcc/0x210
[    6.873830]  driver_probe_device+0x64/0x140
[    6.877958]  __driver_attach+0x114/0x1f0
[    6.881828]  bus_for_each_dev+0xe8/0x160
[    6.885698]  driver_attach+0x34/0x50
[    6.889224]  bus_add_driver+0x228/0x300
[    6.893008]  driver_register+0xc0/0x1e0
[    6.896792]  __platform_driver_register+0x44/0x60
[    6.901436]  fclk_driver_init+0x1c/0x28
[    6.905220]  do_one_initcall+0x104/0x590
[    6.909091]  kernel_init_freeable+0x254/0x2bc
[    6.913390]  kernel_init+0x24/0x130
[    6.916831]  ret_from_fork+0x10/0x20

Fix it by passing the GFP_ATOMIC gfp flag for the corresponding
memory allocation.

Fixes: acfdd18591ea ("firmware: xilinx: Use hash-table for api feature check")
Cc: stable <stable@kernel.org>
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Amit Sunil Dhamne <amit.sunil.dhamne@xilinx.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Link: https://lore.kernel.org/r/20230308222602.123866-1-roman.gushchin@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
firmware/efi sysfb_efi: Add quirk for Lenovo IdeaPad Duet 3 2023-03-11T12:50:38+00:00 Darrell Kavanagh darrell.kavanagh@gmail.com 2023-02-15T11:50:45+00:00 953abd8271a59396f9df184835c46982885c1e27 [ Upstream commit e1d447157f232c650e6f32c9fb89ff3d0207c69a ] Another Lenovo convertable which reports a landscape resolution of 1920x1200 with a pitch of (1920 * 4) bytes, while the actual framebuffer has a resolution of 1200x1920 with a pitch of (1200 * 4) bytes. Signed-off-by: Darrell Kavanagh <darrell.kavanagh@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit e1d447157f232c650e6f32c9fb89ff3d0207c69a ]

Another Lenovo convertable which reports a landscape resolution of
1920x1200 with a pitch of (1920 * 4) bytes, while the actual framebuffer
has a resolution of 1200x1920 with a pitch of (1200 * 4) bytes.

Signed-off-by: Darrell Kavanagh <darrell.kavanagh@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
firmware: coreboot: framebuffer: Ignore reserved pixel color bits 2023-03-10T08:29:22+00:00 Alper Nebi Yasak alpernebiyasak@gmail.com 2023-01-22T19:04:31+00:00 22689a071d62286aed6b87a646f2d6ea8fdaf964 commit e6acaf25cba14661211bb72181c35dd13b24f5b3 upstream. The coreboot framebuffer doesn't support transparency, its 'reserved' bit field is merely padding for byte/word alignment of pixel colors [1]. When trying to match the framebuffer to a simplefb format, the kernel driver unnecessarily requires the format's transparency bit field to exactly match this padding, even if the former is zero-width. Due to a coreboot bug [2] (fixed upstream), some boards misreport the reserved field's size as equal to its position (0x18 for both on a 'Lick' Chromebook), and the driver fails to probe where it would have otherwise worked fine with e.g. the a8r8g8b8 or x8r8g8b8 formats. Remove the transparency comparison with reserved bits. When the bits-per-pixel and other color components match, transparency will already be in a subset of the reserved field. Not forcing it to match reserved bits allows the driver to work on the boards which misreport the reserved field. It also enables using simplefb formats that don't have transparency bits, although this doesn't currently happen due to format support and ordering in linux/platform_data/simplefb.h. [1] https://review.coreboot.org/plugins/gitiles/coreboot/+/4.19/src/commonlib/include/commonlib/coreboot_tables.h#255 [2] https://review.coreboot.org/plugins/gitiles/coreboot/+/4.13/src/drivers/intel/fsp2_0/graphics.c#82 Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com> Link: https://lore.kernel.org/r/20230122190433.195941-1-alpernebiyasak@gmail.com Cc: Salvatore Bonaccorso <carnil@debian.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit e6acaf25cba14661211bb72181c35dd13b24f5b3 upstream.

The coreboot framebuffer doesn't support transparency, its 'reserved'
bit field is merely padding for byte/word alignment of pixel colors [1].
When trying to match the framebuffer to a simplefb format, the kernel
driver unnecessarily requires the format's transparency bit field to
exactly match this padding, even if the former is zero-width.

Due to a coreboot bug [2] (fixed upstream), some boards misreport the
reserved field's size as equal to its position (0x18 for both on a
'Lick' Chromebook), and the driver fails to probe where it would have
otherwise worked fine with e.g. the a8r8g8b8 or x8r8g8b8 formats.

Remove the transparency comparison with reserved bits. When the
bits-per-pixel and other color components match, transparency will
already be in a subset of the reserved field. Not forcing it to match
reserved bits allows the driver to work on the boards which misreport
the reserved field. It also enables using simplefb formats that don't
have transparency bits, although this doesn't currently happen due to
format support and ordering in linux/platform_data/simplefb.h.

[1] https://review.coreboot.org/plugins/gitiles/coreboot/+/4.19/src/commonlib/include/commonlib/coreboot_tables.h#255
[2] https://review.coreboot.org/plugins/gitiles/coreboot/+/4.13/src/drivers/intel/fsp2_0/graphics.c#82

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20230122190433.195941-1-alpernebiyasak@gmail.com
Cc: Salvatore Bonaccorso <carnil@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>