linux-stable.git/drivers/firmware, branch v4.9.210

efi/gop: Fix memory leak in __gop_query32/64()

2020-01-12T10:24:21+00:00

[ Upstream commit ff397be685e410a59c34b21ce0c55d4daa466bb7 ]

efi_graphics_output_protocol::query_mode() returns info in
callee-allocated memory which must be freed by the caller, which
we aren't doing.

We don't actually need to call query_mode() in order to obtain the
info for the current graphics mode, which is already there in
gop->mode->info, so just access it directly in the setup_gop32/64()
functions.

Also nothing uses the size of the info structure, so don't update the
passed-in size (which is the size of the gop_handle table in bytes)
unnecessarily.

Signed-off-by: Arvind Sankar 
Signed-off-by: Ard Biesheuvel 
Cc: Andy Shevchenko 
Cc: Bhupesh Sharma 
Cc: Masayoshi Mizuma 
Cc: linux-efi@vger.kernel.org
Link: https://lkml.kernel.org/r/20191206165542.31469-5-ardb@kernel.org
Signed-off-by: Ingo Molnar 
Signed-off-by: Sasha Levin

efi/gop: Return EFI_SUCCESS if a usable GOP was found

2020-01-12T10:24:20+00:00

[ Upstream commit dbd89c303b4420f6cdb689fd398349fc83b059dd ]

If we've found a usable instance of the Graphics Output Protocol
(GOP) with a framebuffer, it is possible that one of the later EFI
calls fails while checking if any support console output. In this
case status may be an EFI error code even though we found a usable
GOP.

Fix this by explicitly return EFI_SUCCESS if a usable GOP has been
located.

Signed-off-by: Arvind Sankar 
Signed-off-by: Ard Biesheuvel 
Cc: Andy Shevchenko 
Cc: Bhupesh Sharma 
Cc: Masayoshi Mizuma 
Cc: linux-efi@vger.kernel.org
Link: https://lkml.kernel.org/r/20191206165542.31469-4-ardb@kernel.org
Signed-off-by: Ingo Molnar 
Signed-off-by: Sasha Levin

efi/gop: Return EFI_NOT_FOUND if there are no usable GOPs

2020-01-12T10:24:20+00:00

[ Upstream commit 6fc3cec30dfeee7d3c5db8154016aff9d65503c5 ]

If we don't find a usable instance of the Graphics Output Protocol
(GOP) because none of them have a framebuffer (i.e. they were all
PIXEL_BLT_ONLY), but all the EFI calls succeeded, we will return
EFI_SUCCESS even though we didn't find a usable GOP.

Fix this by explicitly returning EFI_NOT_FOUND if no usable GOPs are
found, allowing the caller to probe for UGA instead.

Signed-off-by: Arvind Sankar 
Signed-off-by: Ard Biesheuvel 
Cc: Andy Shevchenko 
Cc: Bhupesh Sharma 
Cc: Masayoshi Mizuma 
Cc: linux-efi@vger.kernel.org
Link: https://lkml.kernel.org/r/20191206165542.31469-3-ardb@kernel.org
Signed-off-by: Ingo Molnar 
Signed-off-by: Sasha Levin

firmware: qcom: scm: Ensure 'a0' status code is treated as signed

2019-12-21T09:42:17+00:00

commit ff34f3cce278a0982a7b66b1afaed6295141b1fc upstream.

The 'a0' member of 'struct arm_smccc_res' is declared as 'unsigned long',
however the Qualcomm SCM firmware interface driver expects to receive
negative error codes via this field, so ensure that it's cast to 'long'
before comparing to see if it is less than 0.

Cc: 
Reviewed-by: Bjorn Andersson 
Signed-off-by: Will Deacon 
Signed-off-by: Greg Kroah-Hartman

gsmi: Fix bug in append_to_eventlog sysfs handler

2019-11-28T17:28:21+00:00

[ Upstream commit 655603de68469adaff16842ac17a5aec9c9ce89b ]

The sysfs handler should return the number of bytes consumed, which in the
case of a successful write is the entire buffer.  Also fix a bug where
param.data_len was being set to (count - (2 * sizeof(u32))) instead of just
(count - sizeof(u32)).  The latter is correct because we skip over the
leading u32 which is our param.type, but we were also incorrectly
subtracting sizeof(u32) on the line where we were actually setting
param.data_len:

	param.data_len = count - sizeof(u32);

This meant that for our example event.kernel_software_watchdog with total
length 10 bytes, param.data_len was just 2 prior to this change.

To test, successfully append an event to the log with gsmi sysfs.
This sample event is for a "Kernel Software Watchdog"

> xxd -g 1 event.kernel_software_watchdog
0000000: 01 00 00 00 ad de 06 00 00 00

> cat event.kernel_software_watchdog > /sys/firmware/gsmi/append_to_eventlog

> mosys eventlog list | tail -1
14 | 2012-06-25 10:14:14 | Kernl Event | Software Watchdog

Signed-off-by: Duncan Laurie 
Reviewed-by: Vadim Bendebury 
Reviewed-by: Stefan Reinauer 
Signed-off-by: Furquan Shaikh 
Tested-by: Furquan Shaikh 
Reviewed-by: Aaron Durbin 
Reviewed-by: Justin TerAvest 
[zwisler: updated changelog for 2nd bug fix and upstream]
Signed-off-by: Ross Zwisler 
Reviewed-by: Guenter Roeck 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin

efi/cper: Fix endianness of PCIe class code

2019-11-06T11:18:09+00:00

[ Upstream commit 6fb9367a15d1a126d222d738b2702c7958594a5f ]

The CPER parser assumes that the class code is big endian, but at least
on this edk2-derived Intel Purley platform it's little endian:

    efi: EFI v2.50 by EDK II BIOS ID:PLYDCRB1.86B.0119.R05.1701181843
    DMI: Intel Corporation PURLEY/PURLEY, BIOS PLYDCRB1.86B.0119.R05.1701181843 01/18/2017

    {1}[Hardware Error]:   device_id: 0000:5d:00.0
    {1}[Hardware Error]:   slot: 0
    {1}[Hardware Error]:   secondary_bus: 0x5e
    {1}[Hardware Error]:   vendor_id: 0x8086, device_id: 0x2030
    {1}[Hardware Error]:   class_code: 000406
                                       ^^^^^^ (should be 060400)

Signed-off-by: Lukas Wunner 
Signed-off-by: Ard Biesheuvel 
Cc: Ben Dooks 
Cc: Dave Young 
Cc: Jarkko Sakkinen 
Cc: Jerry Snitselaar 
Cc: Linus Torvalds 
Cc: Lyude Paul 
Cc: Matthew Garrett 
Cc: Octavian Purdila 
Cc: Peter Jones 
Cc: Peter Zijlstra 
Cc: Scott Talbert 
Cc: Thomas Gleixner 
Cc: linux-efi@vger.kernel.org
Cc: linux-integrity@vger.kernel.org
Link: https://lkml.kernel.org/r/20191002165904.8819-2-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar 
Signed-off-by: Sasha Levin

efivar/ssdt: Don't iterate over EFI vars if no SSDT override was specified

2019-10-17T20:42:42+00:00

commit c05f8f92b701576b615f30aac31fabdc0648649b upstream.

The kernel command line option efivar_ssdt= allows the name to be
specified of an EFI variable containing an ACPI SSDT table that should
be loaded into memory by the OS, and treated as if it was provided by
the firmware.

Currently, that code will always iterate over the EFI variables and
compare each name with the provided name, even if the command line
option wasn't set to begin with.

So bail early when no variable name was provided. This works around a
boot regression on the 2012 Mac Pro, as reported by Scott.

Tested-by: Scott Talbert 
Signed-off-by: Ard Biesheuvel 
Cc:  # v4.9+
Cc: Ben Dooks 
Cc: Dave Young 
Cc: Jarkko Sakkinen 
Cc: Jerry Snitselaar 
Cc: Linus Torvalds 
Cc: Lukas Wunner 
Cc: Lyude Paul 
Cc: Matthew Garrett 
Cc: Octavian Purdila 
Cc: Peter Jones 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Cc: linux-efi@vger.kernel.org
Cc: linux-integrity@vger.kernel.org
Fixes: 475fb4e8b2f4 ("efi / ACPI: load SSTDs from EFI variables")
Link: https://lkml.kernel.org/r/20191002165904.8819-3-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar 
Signed-off-by: Greg Kroah-Hartman

efi: cper: print AER info of PCIe fatal error

2019-10-05T10:30:21+00:00

[ Upstream commit b194a77fcc4001dc40aecdd15d249648e8a436d1 ]

AER info of PCIe fatal error is not printed in the current driver.
Because APEI driver will panic directly for fatal error, and can't
run to the place of printing AER info.

An example log is as following:
{763}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 11
{763}[Hardware Error]: event severity: fatal
{763}[Hardware Error]:  Error 0, type: fatal
{763}[Hardware Error]:   section_type: PCIe error
{763}[Hardware Error]:   port_type: 0, PCIe end point
{763}[Hardware Error]:   version: 4.0
{763}[Hardware Error]:   command: 0x0000, status: 0x0010
{763}[Hardware Error]:   device_id: 0000:82:00.0
{763}[Hardware Error]:   slot: 0
{763}[Hardware Error]:   secondary_bus: 0x00
{763}[Hardware Error]:   vendor_id: 0x8086, device_id: 0x10fb
{763}[Hardware Error]:   class_code: 000002
Kernel panic - not syncing: Fatal hardware error!

This issue was imported by the patch, '37448adfc7ce ("aerdrv: Move
cper_print_aer() call out of interrupt context")'. To fix this issue,
this patch adds print of AER info in cper_print_pcie() for fatal error.

Here is the example log after this patch applied:
{24}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 10
{24}[Hardware Error]: event severity: fatal
{24}[Hardware Error]:  Error 0, type: fatal
{24}[Hardware Error]:   section_type: PCIe error
{24}[Hardware Error]:   port_type: 0, PCIe end point
{24}[Hardware Error]:   version: 4.0
{24}[Hardware Error]:   command: 0x0546, status: 0x4010
{24}[Hardware Error]:   device_id: 0000:01:00.0
{24}[Hardware Error]:   slot: 0
{24}[Hardware Error]:   secondary_bus: 0x00
{24}[Hardware Error]:   vendor_id: 0x15b3, device_id: 0x1019
{24}[Hardware Error]:   class_code: 000002
{24}[Hardware Error]:   aer_uncor_status: 0x00040000, aer_uncor_mask: 0x00000000
{24}[Hardware Error]:   aer_uncor_severity: 0x00062010
{24}[Hardware Error]:   TLP Header: 000000c0 01010000 00000001 00000000
Kernel panic - not syncing: Fatal hardware error!

Fixes: 37448adfc7ce ("aerdrv: Move cper_print_aer() call out of interrupt context")
Signed-off-by: Xiaofei Tan 
Reviewed-by: James Morse 
[ardb: put parens around terms of && operator]
Signed-off-by: Ard Biesheuvel 
Signed-off-by: Sasha Levin

iscsi_ibft: make ISCSI_IBFT dependson ACPI instead of ISCSI_IBFT_FIND

2019-08-25T08:51:23+00:00

[ Upstream commit 94bccc34071094c165c79b515d21b63c78f7e968 ]

iscsi_ibft can use ACPI to find the iBFT entry during bootup,
currently, ISCSI_IBFT depends on ISCSI_IBFT_FIND which is
a X86 legacy way to find the iBFT by searching through the
low memory. This patch changes the dependency so that other
arch like ARM64 can use ISCSI_IBFT as long as the arch supports
ACPI.

ibft_init() needs to use the global variable ibft_addr declared
in iscsi_ibft_find.c. A #ifndef CONFIG_ISCSI_IBFT_FIND is needed
to declare the variable if CONFIG_ISCSI_IBFT_FIND is not selected.
Moving ibft_addr into the iscsi_ibft.c does not work because if
ISCSI_IBFT is selected as a module, the arch/x86/kernel/setup.c won't
be able to find the variable at compile time.

Signed-off-by: Thomas Tai 
Signed-off-by: Konrad Rzeszutek Wilk 
Signed-off-by: Sasha Levin

efi/libstub: Unify command line param parsing

2019-06-11T10:22:45+00:00

commit 60f38de7a8d4e816100ceafd1b382df52527bd50 upstream.

Merge the parsing of the command line carried out in arm-stub.c with
the handling in efi_parse_options(). Note that this also fixes the
missing handling of CONFIG_CMDLINE_FORCE=y, in which case the builtin
command line should supersede the one passed by the firmware.

Signed-off-by: Ard Biesheuvel 
Cc: Linus Torvalds 
Cc: Matt Fleming 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Cc: bhe@redhat.com
Cc: bhsharma@redhat.com
Cc: bp@alien8.de
Cc: eugene@hp.com
Cc: evgeny.kalugin@intel.com
Cc: jhugo@codeaurora.org
Cc: leif.lindholm@linaro.org
Cc: linux-efi@vger.kernel.org
Cc: mark.rutland@arm.com
Cc: roy.franz@cavium.com
Cc: rruigrok@codeaurora.org
Link: http://lkml.kernel.org/r/20170404160910.28115-1-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar 
[ardb: fix up merge conflicts with 4.9.180]
Signed-off-by: Ard Biesheuvel 
Signed-off-by: Greg Kroah-Hartman