<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux-stable.git/drivers/firmware, branch v4.4.192</title>
<subtitle>Linux kernel stable tree</subtitle>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/'/>
<entry>
<title>iscsi_ibft: make ISCSI_IBFT dependson ACPI instead of ISCSI_IBFT_FIND</title>
<updated>2019-08-25T08:52:46+00:00</updated>
<author>
<name>Thomas Tai</name>
<email>thomas.tai@oracle.com</email>
</author>
<published>2019-07-18T18:37:34+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=0487be5ef8eaf15238aa64577418d3248151fe54'/>
<id>0487be5ef8eaf15238aa64577418d3248151fe54</id>
<content type='text'>
[ Upstream commit 94bccc34071094c165c79b515d21b63c78f7e968 ]

iscsi_ibft can use ACPI to find the iBFT entry during bootup,
currently, ISCSI_IBFT depends on ISCSI_IBFT_FIND which is
a X86 legacy way to find the iBFT by searching through the
low memory. This patch changes the dependency so that other
arch like ARM64 can use ISCSI_IBFT as long as the arch supports
ACPI.

ibft_init() needs to use the global variable ibft_addr declared
in iscsi_ibft_find.c. A #ifndef CONFIG_ISCSI_IBFT_FIND is needed
to declare the variable if CONFIG_ISCSI_IBFT_FIND is not selected.
Moving ibft_addr into the iscsi_ibft.c does not work because if
ISCSI_IBFT is selected as a module, the arch/x86/kernel/setup.c won't
be able to find the variable at compile time.

Signed-off-by: Thomas Tai &lt;thomas.tai@oracle.com&gt;
Signed-off-by: Konrad Rzeszutek Wilk &lt;konrad.wilk@oracle.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 94bccc34071094c165c79b515d21b63c78f7e968 ]

iscsi_ibft can use ACPI to find the iBFT entry during bootup,
currently, ISCSI_IBFT depends on ISCSI_IBFT_FIND which is
a X86 legacy way to find the iBFT by searching through the
low memory. This patch changes the dependency so that other
arch like ARM64 can use ISCSI_IBFT as long as the arch supports
ACPI.

ibft_init() needs to use the global variable ibft_addr declared
in iscsi_ibft_find.c. A #ifndef CONFIG_ISCSI_IBFT_FIND is needed
to declare the variable if CONFIG_ISCSI_IBFT_FIND is not selected.
Moving ibft_addr into the iscsi_ibft.c does not work because if
ISCSI_IBFT is selected as a module, the arch/x86/kernel/setup.c won't
be able to find the variable at compile time.

Signed-off-by: Thomas Tai &lt;thomas.tai@oracle.com&gt;
Signed-off-by: Konrad Rzeszutek Wilk &lt;konrad.wilk@oracle.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>efi: stub: define DISABLE_BRANCH_PROFILING for all architectures</title>
<updated>2019-04-03T04:23:20+00:00</updated>
<author>
<name>Ard Biesheuvel</name>
<email>ard.biesheuvel@linaro.org</email>
</author>
<published>2015-12-23T09:29:28+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=1f2c3b46811d9fa157e3e8a4b0f700a5c488ee1a'/>
<id>1f2c3b46811d9fa157e3e8a4b0f700a5c488ee1a</id>
<content type='text'>
[ Upstream commit b523e185bba36164ca48a190f5468c140d815414 ]

This moves the DISABLE_BRANCH_PROFILING define from the x86 specific
to the general CFLAGS definition for the stub. This fixes build errors
when building for arm64 with CONFIG_PROFILE_ALL_BRANCHES_ENABLED.

Reviewed-by: Matt Fleming &lt;matt@codeblueprint.co.uk&gt;
Reported-by: Will Deacon &lt;will.deacon@arm.com&gt;
Signed-off-by: Ard Biesheuvel &lt;ard.biesheuvel@linaro.org&gt;
Signed-off-by: Will Deacon &lt;will.deacon@arm.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit b523e185bba36164ca48a190f5468c140d815414 ]

This moves the DISABLE_BRANCH_PROFILING define from the x86 specific
to the general CFLAGS definition for the stub. This fixes build errors
when building for arm64 with CONFIG_PROFILE_ALL_BRANCHES_ENABLED.

Reviewed-by: Matt Fleming &lt;matt@codeblueprint.co.uk&gt;
Reported-by: Will Deacon &lt;will.deacon@arm.com&gt;
Signed-off-by: Ard Biesheuvel &lt;ard.biesheuvel@linaro.org&gt;
Signed-off-by: Will Deacon &lt;will.deacon@arm.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Revert "x86/platform/UV: Use efi_runtime_lock to serialise BIOS calls"</title>
<updated>2019-03-23T07:44:28+00:00</updated>
<author>
<name>Sasha Levin</name>
<email>sashal@kernel.org</email>
</author>
<published>2019-03-12T00:28:23+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=a20168a138368f4d470923f0d446bfcc827fe745'/>
<id>a20168a138368f4d470923f0d446bfcc827fe745</id>
<content type='text'>
This reverts commit 7212e37cbdf99f48e4a6c689a42f4bda1ae69001.

Hedi Berriche &lt;hedi.berriche@hpe.com&gt; notes:

&gt; In 4.4-stable efi_runtime_lock as defined in drivers/firmware/efi/runtime-wrappers.c
&gt; is a spinlock (given it predates commit dce48e351c0d) and commit
&gt;
&gt;         f331e766c4be x86/platform/UV: Use efi_runtime_lock to serialise BIOS calls
&gt;
&gt; which 7212e37cbdf9 is a backport of, needs it to be a semaphore.

Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
This reverts commit 7212e37cbdf99f48e4a6c689a42f4bda1ae69001.

Hedi Berriche &lt;hedi.berriche@hpe.com&gt; notes:

&gt; In 4.4-stable efi_runtime_lock as defined in drivers/firmware/efi/runtime-wrappers.c
&gt; is a spinlock (given it predates commit dce48e351c0d) and commit
&gt;
&gt;         f331e766c4be x86/platform/UV: Use efi_runtime_lock to serialise BIOS calls
&gt;
&gt; which 7212e37cbdf9 is a backport of, needs it to be a semaphore.

Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>iscsi_ibft: Fix missing break in switch statement</title>
<updated>2019-03-23T07:44:28+00:00</updated>
<author>
<name>Gustavo A. R. Silva</name>
<email>gustavo@embeddedor.com</email>
</author>
<published>2019-02-11T18:43:23+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=f7ff45b8c3f224f45033fa8d32758ac608632a38'/>
<id>f7ff45b8c3f224f45033fa8d32758ac608632a38</id>
<content type='text'>
commit df997abeebadaa4824271009e2d2b526a70a11cb upstream.

Add missing break statement in order to prevent the code from falling
through to case ISCSI_BOOT_TGT_NAME, which is unnecessary.

This bug was found thanks to the ongoing efforts to enable
-Wimplicit-fallthrough.

Fixes: b33a84a38477 ("ibft: convert iscsi_ibft module to iscsi boot lib")
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva &lt;gustavo@embeddedor.com&gt;
Signed-off-by: Konrad Rzeszutek Wilk &lt;konrad.wilk@oracle.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit df997abeebadaa4824271009e2d2b526a70a11cb upstream.

Add missing break statement in order to prevent the code from falling
through to case ISCSI_BOOT_TGT_NAME, which is unnecessary.

This bug was found thanks to the ongoing efforts to enable
-Wimplicit-fallthrough.

Fixes: b33a84a38477 ("ibft: convert iscsi_ibft module to iscsi boot lib")
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva &lt;gustavo@embeddedor.com&gt;
Signed-off-by: Konrad Rzeszutek Wilk &lt;konrad.wilk@oracle.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>x86/platform/UV: Use efi_runtime_lock to serialise BIOS calls</title>
<updated>2019-02-20T09:13:23+00:00</updated>
<author>
<name>Hedi Berriche</name>
<email>hedi.berriche@hpe.com</email>
</author>
<published>2019-02-13T19:34:13+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=7212e37cbdf99f48e4a6c689a42f4bda1ae69001'/>
<id>7212e37cbdf99f48e4a6c689a42f4bda1ae69001</id>
<content type='text'>
commit f331e766c4be33f4338574f3c9f7f77e98ab4571 upstream.

Calls into UV firmware must be protected against concurrency, expose the
efi_runtime_lock to the UV platform, and use it to serialise UV BIOS
calls.

Signed-off-by: Hedi Berriche &lt;hedi.berriche@hpe.com&gt;
Signed-off-by: Borislav Petkov &lt;bp@suse.de&gt;
Reviewed-by: Ard Biesheuvel &lt;ard.biesheuvel@linaro.org&gt;
Reviewed-by: Russ Anderson &lt;rja@hpe.com&gt;
Reviewed-by: Dimitri Sivanich &lt;sivanich@hpe.com&gt;
Reviewed-by: Mike Travis &lt;mike.travis@hpe.com&gt;
Cc: Andy Shevchenko &lt;andy@infradead.org&gt;
Cc: Bhupesh Sharma &lt;bhsharma@redhat.com&gt;
Cc: Darren Hart &lt;dvhart@infradead.org&gt;
Cc: "H. Peter Anvin" &lt;hpa@zytor.com&gt;
Cc: Ingo Molnar &lt;mingo@redhat.com&gt;
Cc: linux-efi &lt;linux-efi@vger.kernel.org&gt;
Cc: platform-driver-x86@vger.kernel.org
Cc: stable@vger.kernel.org # v4.9+
Cc: Steve Wahl &lt;steve.wahl@hpe.com&gt;
Cc: Thomas Gleixner &lt;tglx@linutronix.de&gt;
Cc: x86-ml &lt;x86@kernel.org&gt;
Link: https://lkml.kernel.org/r/20190213193413.25560-5-hedi.berriche@hpe.com
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit f331e766c4be33f4338574f3c9f7f77e98ab4571 upstream.

Calls into UV firmware must be protected against concurrency, expose the
efi_runtime_lock to the UV platform, and use it to serialise UV BIOS
calls.

Signed-off-by: Hedi Berriche &lt;hedi.berriche@hpe.com&gt;
Signed-off-by: Borislav Petkov &lt;bp@suse.de&gt;
Reviewed-by: Ard Biesheuvel &lt;ard.biesheuvel@linaro.org&gt;
Reviewed-by: Russ Anderson &lt;rja@hpe.com&gt;
Reviewed-by: Dimitri Sivanich &lt;sivanich@hpe.com&gt;
Reviewed-by: Mike Travis &lt;mike.travis@hpe.com&gt;
Cc: Andy Shevchenko &lt;andy@infradead.org&gt;
Cc: Bhupesh Sharma &lt;bhsharma@redhat.com&gt;
Cc: Darren Hart &lt;dvhart@infradead.org&gt;
Cc: "H. Peter Anvin" &lt;hpa@zytor.com&gt;
Cc: Ingo Molnar &lt;mingo@redhat.com&gt;
Cc: linux-efi &lt;linux-efi@vger.kernel.org&gt;
Cc: platform-driver-x86@vger.kernel.org
Cc: stable@vger.kernel.org # v4.9+
Cc: Steve Wahl &lt;steve.wahl@hpe.com&gt;
Cc: Thomas Gleixner &lt;tglx@linutronix.de&gt;
Cc: x86-ml &lt;x86@kernel.org&gt;
Link: https://lkml.kernel.org/r/20190213193413.25560-5-hedi.berriche@hpe.com
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>efi/libstub/arm64: Set -fpie when building the EFI stub</title>
<updated>2018-11-27T15:07:58+00:00</updated>
<author>
<name>Ard Biesheuvel</name>
<email>ard.biesheuvel@linaro.org</email>
</author>
<published>2017-08-18T19:49:37+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=ba0523881cac21c5cdc477390ff3e3ef9104437e'/>
<id>ba0523881cac21c5cdc477390ff3e3ef9104437e</id>
<content type='text'>
commit 91ee5b21ee026c49e4e7483de69b55b8b47042be upstream.

Clang may emit absolute symbol references when building in non-PIC mode,
even when using the default 'small' code model, which is already mostly
position independent to begin with, due to its use of adrp/add pairs
that have a relative range of +/- 4 GB. The remedy is to pass the -fpie
flag, which can be done safely now that the code has been updated to avoid
GOT indirections (which may be emitted due to the compiler assuming that
the PIC/PIE code may end up in a shared library that is subject to ELF
symbol preemption)

Passing -fpie when building code that needs to execute at an a priori
unknown offset is arguably an improvement in any case, and given that
the recent visibility changes allow the PIC build to pass with GCC as
well, let's add -fpie for all arm64 builds rather than only for Clang.

Tested-by: Matthias Kaehlcke &lt;mka@chromium.org&gt;
Signed-off-by: Ard Biesheuvel &lt;ard.biesheuvel@linaro.org&gt;
Cc: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
Cc: Matt Fleming &lt;matt@codeblueprint.co.uk&gt;
Cc: Peter Zijlstra &lt;peterz@infradead.org&gt;
Cc: Thomas Gleixner &lt;tglx@linutronix.de&gt;
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20170818194947.19347-5-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar &lt;mingo@kernel.org&gt;
Signed-off-by: Nathan Chancellor &lt;natechancellor@gmail.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 91ee5b21ee026c49e4e7483de69b55b8b47042be upstream.

Clang may emit absolute symbol references when building in non-PIC mode,
even when using the default 'small' code model, which is already mostly
position independent to begin with, due to its use of adrp/add pairs
that have a relative range of +/- 4 GB. The remedy is to pass the -fpie
flag, which can be done safely now that the code has been updated to avoid
GOT indirections (which may be emitted due to the compiler assuming that
the PIC/PIE code may end up in a shared library that is subject to ELF
symbol preemption)

Passing -fpie when building code that needs to execute at an a priori
unknown offset is arguably an improvement in any case, and given that
the recent visibility changes allow the PIC build to pass with GCC as
well, let's add -fpie for all arm64 builds rather than only for Clang.

Tested-by: Matthias Kaehlcke &lt;mka@chromium.org&gt;
Signed-off-by: Ard Biesheuvel &lt;ard.biesheuvel@linaro.org&gt;
Cc: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
Cc: Matt Fleming &lt;matt@codeblueprint.co.uk&gt;
Cc: Peter Zijlstra &lt;peterz@infradead.org&gt;
Cc: Thomas Gleixner &lt;tglx@linutronix.de&gt;
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20170818194947.19347-5-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar &lt;mingo@kernel.org&gt;
Signed-off-by: Nathan Chancellor &lt;natechancellor@gmail.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>efi/libstub/arm64: Force 'hidden' visibility for section markers</title>
<updated>2018-11-27T15:07:58+00:00</updated>
<author>
<name>Ard Biesheuvel</name>
<email>ard.biesheuvel@linaro.org</email>
</author>
<published>2017-08-18T19:49:36+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=c2d14540ebbd0522b8226348909d13065544af94'/>
<id>c2d14540ebbd0522b8226348909d13065544af94</id>
<content type='text'>
commit 0426a4e68f18d75515414361de9e3e1445d2644e upstream.

To prevent the compiler from emitting absolute references to the section
markers when running in PIC mode, override the visibility to 'hidden' for
all contents of asm/sections.h

Tested-by: Matthias Kaehlcke &lt;mka@chromium.org&gt;
Signed-off-by: Ard Biesheuvel &lt;ard.biesheuvel@linaro.org&gt;
Cc: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
Cc: Matt Fleming &lt;matt@codeblueprint.co.uk&gt;
Cc: Peter Zijlstra &lt;peterz@infradead.org&gt;
Cc: Thomas Gleixner &lt;tglx@linutronix.de&gt;
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20170818194947.19347-4-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar &lt;mingo@kernel.org&gt;
[nc: Fix conflict due to lack of commit 42b55734030c1 in linux-4.4.y]
Signed-off-by: Nathan Chancellor &lt;natechancellor@gmail.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 0426a4e68f18d75515414361de9e3e1445d2644e upstream.

To prevent the compiler from emitting absolute references to the section
markers when running in PIC mode, override the visibility to 'hidden' for
all contents of asm/sections.h

Tested-by: Matthias Kaehlcke &lt;mka@chromium.org&gt;
Signed-off-by: Ard Biesheuvel &lt;ard.biesheuvel@linaro.org&gt;
Cc: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
Cc: Matt Fleming &lt;matt@codeblueprint.co.uk&gt;
Cc: Peter Zijlstra &lt;peterz@infradead.org&gt;
Cc: Thomas Gleixner &lt;tglx@linutronix.de&gt;
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20170818194947.19347-4-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar &lt;mingo@kernel.org&gt;
[nc: Fix conflict due to lack of commit 42b55734030c1 in linux-4.4.y]
Signed-off-by: Nathan Chancellor &lt;natechancellor@gmail.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>firmware: dmi_scan: Fix handling of empty DMI strings</title>
<updated>2018-05-30T05:48:56+00:00</updated>
<author>
<name>Jean Delvare</name>
<email>jdelvare@suse.de</email>
</author>
<published>2018-02-03T10:25:20+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=50fb55b36df46e2e7c74a11977dc9e087aa7b3c2'/>
<id>50fb55b36df46e2e7c74a11977dc9e087aa7b3c2</id>
<content type='text'>
[ Upstream commit a7770ae194569e96a93c48aceb304edded9cc648 ]

The handling of empty DMI strings looks quite broken to me:
* Strings from 1 to 7 spaces are not considered empty.
* True empty DMI strings (string index set to 0) are not considered
  empty, and result in allocating a 0-char string.
* Strings with invalid index also result in allocating a 0-char
  string.
* Strings starting with 8 spaces are all considered empty, even if
  non-space characters follow (sounds like a weird thing to do, but
  I have actually seen occurrences of this in DMI tables before.)
* Strings which are considered empty are reported as 8 spaces,
  instead of being actually empty.

Some of these issues are the result of an off-by-one error in memcmp,
the rest is incorrect by design.

So let's get it square: missing strings and strings made of only
spaces, regardless of their length, should be treated as empty and
no memory should be allocated for them. All other strings are
non-empty and should be allocated.

Signed-off-by: Jean Delvare &lt;jdelvare@suse.de&gt;
Fixes: 79da4721117f ("x86: fix DMI out of memory problems")
Cc: Parag Warudkar &lt;parag.warudkar@gmail.com&gt;
Cc: Ingo Molnar &lt;mingo@kernel.org&gt;
Cc: Thomas Gleixner &lt;tglx@linutronix.de&gt;
Signed-off-by: Sasha Levin &lt;alexander.levin@microsoft.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit a7770ae194569e96a93c48aceb304edded9cc648 ]

The handling of empty DMI strings looks quite broken to me:
* Strings from 1 to 7 spaces are not considered empty.
* True empty DMI strings (string index set to 0) are not considered
  empty, and result in allocating a 0-char string.
* Strings with invalid index also result in allocating a 0-char
  string.
* Strings starting with 8 spaces are all considered empty, even if
  non-space characters follow (sounds like a weird thing to do, but
  I have actually seen occurrences of this in DMI tables before.)
* Strings which are considered empty are reported as 8 spaces,
  instead of being actually empty.

Some of these issues are the result of an off-by-one error in memcmp,
the rest is incorrect by design.

So let's get it square: missing strings and strings made of only
spaces, regardless of their length, should be treated as empty and
no memory should be allocated for them. All other strings are
non-empty and should be allocated.

Signed-off-by: Jean Delvare &lt;jdelvare@suse.de&gt;
Fixes: 79da4721117f ("x86: fix DMI out of memory problems")
Cc: Parag Warudkar &lt;parag.warudkar@gmail.com&gt;
Cc: Ingo Molnar &lt;mingo@kernel.org&gt;
Cc: Thomas Gleixner &lt;tglx@linutronix.de&gt;
Signed-off-by: Sasha Levin &lt;alexander.levin@microsoft.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>efi/esrt: Cleanup bad memory map log messages</title>
<updated>2017-12-20T09:04:56+00:00</updated>
<author>
<name>Daniel Drake</name>
<email>drake@endlessm.com</email>
</author>
<published>2017-02-07T19:08:23+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=a49aa7aadbd36395d3463bcadcdf187477c048ad'/>
<id>a49aa7aadbd36395d3463bcadcdf187477c048ad</id>
<content type='text'>
[ Upstream commit 822f5845f710e57d7e2df1fd1ee00d6e19d334fe ]

The Intel Compute Stick STCK1A8LFC and Weibu F3C platforms both
log 2 error messages during boot:

   efi: requested map not found.
   esrt: ESRT header is not in the memory map.

Searching the web, this seems to affect many other platforms too.
Since these messages are logged as errors, they appear on-screen during
the boot process even when using the "quiet" boot parameter used by
distros.

Demote the ESRT error to a warning so that it does not appear on-screen,
and delete the error logging from efi_mem_desc_lookup; both callsites
of that function log more specific messages upon failure.

Out of curiosity I looked closer at the Weibu F3C. There is no entry in
the UEFI-provided memory map which corresponds to the ESRT pointer, but
hacking the code to map it anyway, the ESRT does appear to be valid with
2 entries.

Signed-off-by: Daniel Drake &lt;drake@endlessm.com&gt;
Cc: Matt Fleming &lt;matt@codeblueprint.co.uk&gt;
Acked-by: Peter Jones &lt;pjones@redhat.com&gt;
Signed-off-by: Ard Biesheuvel &lt;ard.biesheuvel@linaro.org&gt;
Signed-off-by: Sasha Levin &lt;alexander.levin@verizon.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 822f5845f710e57d7e2df1fd1ee00d6e19d334fe ]

The Intel Compute Stick STCK1A8LFC and Weibu F3C platforms both
log 2 error messages during boot:

   efi: requested map not found.
   esrt: ESRT header is not in the memory map.

Searching the web, this seems to affect many other platforms too.
Since these messages are logged as errors, they appear on-screen during
the boot process even when using the "quiet" boot parameter used by
distros.

Demote the ESRT error to a warning so that it does not appear on-screen,
and delete the error logging from efi_mem_desc_lookup; both callsites
of that function log more specific messages upon failure.

Out of curiosity I looked closer at the Weibu F3C. There is no entry in
the UEFI-provided memory map which corresponds to the ESRT pointer, but
hacking the code to map it anyway, the ESRT does appear to be valid with
2 entries.

Signed-off-by: Daniel Drake &lt;drake@endlessm.com&gt;
Cc: Matt Fleming &lt;matt@codeblueprint.co.uk&gt;
Acked-by: Peter Jones &lt;pjones@redhat.com&gt;
Signed-off-by: Ard Biesheuvel &lt;ard.biesheuvel@linaro.org&gt;
Signed-off-by: Sasha Levin &lt;alexander.levin@verizon.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>efi: Move some sysfs files to be read-only by root</title>
<updated>2017-12-16T09:33:48+00:00</updated>
<author>
<name>Greg Kroah-Hartman</name>
<email>gregkh@linuxfoundation.org</email>
</author>
<published>2017-12-06T09:50:08+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=481efb4c7256bb5516287c46f8315a56c65b9dbb'/>
<id>481efb4c7256bb5516287c46f8315a56c65b9dbb</id>
<content type='text'>
commit af97a77bc01ce49a466f9d4c0125479e2e2230b6 upstream.

Thanks to the scripts/leaking_addresses.pl script, it was found that
some EFI values should not be readable by non-root users.

So make them root-only, and to do that, add a __ATTR_RO_MODE() macro to
make this easier, and use it in other places at the same time.

Reported-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
Tested-by: Dave Young &lt;dyoung@redhat.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
Signed-off-by: Ard Biesheuvel &lt;ard.biesheuvel@linaro.org&gt;
Cc: H. Peter Anvin &lt;hpa@zytor.com&gt;
Cc: Matt Fleming &lt;matt@codeblueprint.co.uk&gt;
Cc: Peter Zijlstra &lt;peterz@infradead.org&gt;
Cc: Thomas Gleixner &lt;tglx@linutronix.de&gt;
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20171206095010.24170-2-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar &lt;mingo@kernel.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit af97a77bc01ce49a466f9d4c0125479e2e2230b6 upstream.

Thanks to the scripts/leaking_addresses.pl script, it was found that
some EFI values should not be readable by non-root users.

So make them root-only, and to do that, add a __ATTR_RO_MODE() macro to
make this easier, and use it in other places at the same time.

Reported-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
Tested-by: Dave Young &lt;dyoung@redhat.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
Signed-off-by: Ard Biesheuvel &lt;ard.biesheuvel@linaro.org&gt;
Cc: H. Peter Anvin &lt;hpa@zytor.com&gt;
Cc: Matt Fleming &lt;matt@codeblueprint.co.uk&gt;
Cc: Peter Zijlstra &lt;peterz@infradead.org&gt;
Cc: Thomas Gleixner &lt;tglx@linutronix.de&gt;
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20171206095010.24170-2-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar &lt;mingo@kernel.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
</feed>
