Pull dmi fixes from Jean Delvare.

* 'dmi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  firmware: dmi_scan: Check DMI structure length
  firmware: dmi: Fix permissions of product_family
  firmware: dmi_scan: Make dmi_walk and dmi_walk_early return real error codes
  firmware: dmi_scan: Look for SMBIOS 3 entry point first

Before accessing DMI data to record it for later, we should ensure
that the DMI structures are large enough to contain the data in
question.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Linus Walleij <linus.walleij@linaro.org>

This is not sensitive information like serial numbers, we can allow
all users to read it.

Fix odd alignment while we're here.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Fixes: c61872c9833d ("firmware: dmi: Add DMI_PRODUCT_FAMILY identification string")
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Linus Walleij <linus.walleij@linaro.org>

Currently they return -1 on error, which will confuse callers if
they try to interpret it as a normal negative error code.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Signed-off-by: Jean Delvare <jdelvare@suse.de>

Since version 3.0.0 of the SMBIOS specification, there can be
multiple entry points in memory, pointing to one or two DMI tables.
If both a 32-bit ("_SM_") entry point and a 64-bit ("_SM3_") entry
point are present, the specification requires that the latter points
to a table which is a super-set of the table pointed to by the
former. Therefore we should give preference to the 64-bit ("_SM3_")
entry point.

However, currently the code is picking the first valid entry point
it finds. Per specification, we should look for a 64-bit ("_SM3_")
entry point first, and if we can't find any, look for a 32-bit
("_SM_" or "_DMI_") entry point. Modify the code to do that.

Signed-off-by: Jean Delvare <jdelvare@suse.de>

Pull char/misc driver fixes from Greg KH:
 "Here are some small driver fixes for 4.12-rc5. Nothing major here,
  just some small bugfixes found by people testing, and a MAINTAINERS
  file update for the genwqe driver.

  All have been in linux-next with no reported issues"

[ The cxl driver fix came in through the powerpc tree earlier ]

* tag 'char-misc-4.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  cxl: Avoid double free_irq() for psl,slice interrupts
  mei: make sysfs modalias format similar as uevent modalias
  drivers: char: mem: Fix wraparound check to allow mappings up to the end
  MAINTAINERS: Change maintainer of genwqe driver
  goldfish_pipe: use GFP_ATOMIC under spin lock
  firmware: vpd: do not leak kobjects
  firmware: vpd: avoid potential use-after-free when destroying section
  firmware: vpd: do not leave freed section attributes to the list

Maniaxx reported a kernel boot crash in the EFI code, which I emulated
by using same invalid phys addr in code:

  BUG: unable to handle kernel paging request at ffffffffff280001
  IP: efi_bgrt_init+0xfb/0x153
  ...
  Call Trace:
   ? bgrt_init+0xbc/0xbc
   acpi_parse_bgrt+0xe/0x12
   acpi_table_parse+0x89/0xb8
   acpi_boot_init+0x445/0x4e2
   ? acpi_parse_x2apic+0x79/0x79
   ? dmi_ignore_irq0_timer_override+0x33/0x33
   setup_arch+0xb63/0xc82
   ? early_idt_handler_array+0x120/0x120
   start_kernel+0xb7/0x443
   ? early_idt_handler_array+0x120/0x120
   x86_64_start_reservations+0x29/0x2b
   x86_64_start_kernel+0x154/0x177
   secondary_startup_64+0x9f/0x9f

There is also a similar bug filed in bugzilla.kernel.org:

  https://bugzilla.kernel.org/show_bug.cgi?id=195633

The crash is caused by this commit:

  7b0a911478c7 efi/x86: Move the EFI BGRT init code to early init code

The root cause is the firmware on those machines provides invalid BGRT
image addresses.

In a kernel before above commit BGRT initializes late and uses ioremap()
to map the image address. Ioremap validates the address, if it is not a
valid physical address ioremap() just fails and returns. However in current
kernel EFI BGRT initializes early and uses early_memremap() which does not
validate the image address, and kernel panic happens.

According to ACPI spec the BGRT image address should fall into
EFI_BOOT_SERVICES_DATA, see the section 5.2.22.4 of below document:

  http://www.uefi.org/sites/default/files/resources/ACPI_6_1.pdf

Fix this issue by validating the image address in efi_bgrt_init(). If the
image address does not fall into any EFI_BOOT_SERVICES_DATA areas we just
bail out with a warning message.

Reported-by: Maniaxx <tripleshiftone@gmail.com>
Signed-off-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Fixes: 7b0a911478c7 ("efi/x86: Move the EFI BGRT init code to early init code")
Link: http://lkml.kernel.org/r/20170609084558.26766-2-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Pull EFI fixes from Ingo Molnar:
 "Misc fixes:

   - three boot crash fixes for uncommon configurations

   - silence a boot warning under virtualization

   - plus a GCC 7 related (harmless) build warning fix"

* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  efi/bgrt: Skip efi_bgrt_init() in case of non-EFI boot
  x86/efi: Correct EFI identity mapping under 'efi=old_map' when KASLR is enabled
  x86/efi: Disable runtime services on kexec kernel if booted with efi=old_map
  efi: Remove duplicate 'const' specifiers
  efi: Don't issue error message when booted under Xen

Pull pin control fixes from Linus Walleij:
 "Here is an overdue pull request for pin control fixes, the most
  prominent feature is to make Intel Chromebooks (and I suspect any
  other Cherryview-based Intel thing) happy again, which we really want
  to see.

  There is a patch hitting drivers/firmware/* that I was uncertain to
  who actually manages, but I got Andy Shevchenko's and Dmitry Torokov's
  review tags on it and I trust them both 100% to do the right thing for
  Intel platform drivers.

  Summary:

   - Make a few Intel Chromebooks with Cherryview DMI firmware work
     smoothly.

   - A fix for some bogus allocations in the generic group management
     code.

   - Some GPIO descriptor lookup table stubs. Merged through the pin
     control tree for administrative reasons.

   - Revert the "bi-directional" and "output-enable" generic properties:
     we need more discussions around this. It seems other SoCs are using
     input/output gate enablement and these terms are not correct.

   - Fix mux and drive strength atomically in the MXS driver.

   - Fix the SPDIF function on sunxi A83T.

   - OF table terminators and other small fixes"

* tag 'pinctrl-v4.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: sunxi: Fix SPDIF function name for A83T
  pinctrl: mxs: atomically switch mux and drive strength config
  pinctrl: cherryview: Extend the Chromebook DMI quirk to Intel_Strago systems
  firmware: dmi: Add DMI_PRODUCT_FAMILY identification string
  pinctrl: core: Fix warning by removing bogus code
  gpiolib: Add stubs for gpiod lookup table interface
  Revert "pinctrl: generic: Add bi-directional and output-enable"
  pinctrl: cherryview: Add terminate entry for dmi_system_id tables

Sabrina Dubroca reported an early panic:

  BUG: unable to handle kernel paging request at ffffffffff240001
  IP: efi_bgrt_init+0xdc/0x134

  [...]

  ---[ end Kernel panic - not syncing: Attempted to kill the idle task!

... which was introduced by:

  7b0a911478c7 ("efi/x86: Move the EFI BGRT init code to early init code")

The cause is that on this machine the firmware provides the EFI ACPI BGRT
table even on legacy non-EFI bootups - which table should be EFI only.

The garbage BGRT data causes the efi_bgrt_init() panic.

Add a check to skip efi_bgrt_init() in case non-EFI bootup to work around
this firmware bug.

Tested-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Cc: <stable@vger.kernel.org> # v4.11+
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Fixes: 7b0a911478c7 ("efi/x86: Move the EFI BGRT init code to early init code")
Link: http://lkml.kernel.org/r/20170526113652.21339-6-matt@codeblueprint.co.uk
[ Rewrote the changelog to be more readable. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>