linux-stable.git/drivers/firmware/google, branch v5.2.7

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 287

2019-06-05T15:36:37+00:00

Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license v2 0 as
  published by the free software foundation this program is
  distributed in the hope that it will be useful but without any
  warranty without even the implied warranty of merchantability or
  fitness for a particular purpose see the gnu general public license
  for more details

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 23 file(s).

Signed-off-by: Thomas Gleixner 
Reviewed-by: Alexios Zavras 
Reviewed-by: Allison Randal 
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141901.115786599@linutronix.de
Signed-off-by: Greg Kroah-Hartman

treewide: Add SPDX license identifier - Makefile/Kconfig

2019-05-21T08:50:46+00:00

Add SPDX license identifiers to all Make/Kconfig files which:

 - Have no license information of any form

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only

Signed-off-by: Thomas Gleixner 
Signed-off-by: Greg Kroah-Hartman

treewide: Add SPDX license identifier for more missed files

2019-05-21T08:50:45+00:00

Add SPDX license identifiers to all files which:

 - Have no license information of any form

 - Have MODULE_LICENCE("GPL*") inside which was used in the initial
   scan/conversion to ignore the file

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only

Signed-off-by: Thomas Gleixner 
Signed-off-by: Greg Kroah-Hartman

firmware: vpd: Drop __iomem usage for memremap() memory

2019-03-27T17:21:29+00:00

memremap() doesn't return an iomem pointer, so we can just use memcpy()
and drop the __iomem annotation here. This silences a sparse warning.

Cc: Guenter Roeck 
Reviewed-by: Guenter Roeck 
Cc: Dmitry Torokhov 
Cc: Anton Vasilyev 
Signed-off-by: Stephen Boyd 
Signed-off-by: Greg Kroah-Hartman

gsmi: Add GSMI commands to log S0ix info

2018-10-15T18:32:26+00:00

Add new GSMI commands (GSMI_CMD_LOG_S0IX_SUSPEND = 0xa,
GSMI_CMD_LOG_S0IX_RESUME = 0xb) that allow firmware to log any
information during S0ix suspend/resume paths.

Traditional ACPI suspend S3 involves BIOS both during the suspend and
the resume paths. However, modern suspend type like S0ix does not
involve firmware on either of the paths. This command gives the
firmware an opportunity to log any required information about the
suspend and resume operations e.g. wake sources.

Additionally, this change adds a module parameter to allow platforms
to specifically enable S0ix logging if required. This prevents any
other platforms from unnecessarily making a GSMI call which could have
any side-effects.

Tested by verifying that wake sources are correctly logged in eventlog.

Signed-off-by: Furquan Shaikh 
Reviewed-by: Aaron Durbin 
Reviewed-by: Rajat Jain 
Signed-off-by: Furquan Shaikh 
Tested-by: Furquan Shaikh 
Reviewed-by: Aaron Durbin 
[zwisler: update changelog for upstream]
Signed-off-by: Ross Zwisler 
Reviewed-by: Guenter Roeck 
Signed-off-by: Greg Kroah-Hartman

gsmi: Remove autoselected dependency on EFI and EFI_VARS

2018-10-15T18:32:26+00:00

Instead of selecting EFI and EFI_VARS automatically when GSMI is
enabled let that portion of the driver be conditionally compiled
if EFI and EFI_VARS are enabled.

This allows the rest of the driver (specifically event log) to
be used if EFI_VARS is not enabled.

To test:
1) verify that EFI_VARS is not automatically selected when
CONFIG_GOOGLE_GSMI is enabled
2) verify that the kernel boots on Link and that GSMI event log
is still available and functional
3) specifically boot the kernel on Alex to ensure it does not
try to load efivars and that gsmi also does not load because it
is not in the supported DMI table

Signed-off-by: Duncan Laurie 
Reviewed-by: Olof Johansson 
Signed-off-by: Benson Leung 
Signed-off-by: Ben Zhang 
Signed-off-by: Filipe Brandenburger 
Signed-off-by: Furquan Shaikh 
Tested-by: Furquan Shaikh 
Reviewed-by: Aaron Durbin 
[zwisler: update changelog for upstream]
Signed-off-by: Ross Zwisler 
Reviewed-by: Guenter Roeck 
Signed-off-by: Greg Kroah-Hartman

gsmi: Add coreboot to list of matching BIOS vendors

2018-10-15T18:32:26+00:00

In order to use this coreboot needs board support for:
CONFIG_ELOG=y
CONFIG_ELOG_GSMI=y

And the kernel driver needs enabled:
CONFIG_GOOGLE_GSMI=y

To test, verify that clean shutdown event is added to the log:

> mosys eventlog list | grep 'Clean Shutdown'
11 | 2012-06-25 09:49:24 | Kernl Event | Clean Shutdown

Signed-off-by: Duncan Laurie 
Reviewed-by: Vadim Bendebury 
Reviewed-by: Stefan Reinauer 
Signed-off-by: Furquan Shaikh 
Tested-by: Furquan Shaikh 
Reviewed-by: Aaron Durbin 
Reviewed-by: Justin TerAvest 
[zwisler: update changelog for upstream]
Signed-off-by: Ross Zwisler 
Reviewed-by: Guenter Roeck 
Signed-off-by: Greg Kroah-Hartman

gsmi: Fix bug in append_to_eventlog sysfs handler

2018-10-15T18:32:26+00:00

The sysfs handler should return the number of bytes consumed, which in the
case of a successful write is the entire buffer.  Also fix a bug where
param.data_len was being set to (count - (2 * sizeof(u32))) instead of just
(count - sizeof(u32)).  The latter is correct because we skip over the
leading u32 which is our param.type, but we were also incorrectly
subtracting sizeof(u32) on the line where we were actually setting
param.data_len:

	param.data_len = count - sizeof(u32);

This meant that for our example event.kernel_software_watchdog with total
length 10 bytes, param.data_len was just 2 prior to this change.

To test, successfully append an event to the log with gsmi sysfs.
This sample event is for a "Kernel Software Watchdog"

> xxd -g 1 event.kernel_software_watchdog
0000000: 01 00 00 00 ad de 06 00 00 00

> cat event.kernel_software_watchdog > /sys/firmware/gsmi/append_to_eventlog

> mosys eventlog list | tail -1
14 | 2012-06-25 10:14:14 | Kernl Event | Software Watchdog

Signed-off-by: Duncan Laurie 
Reviewed-by: Vadim Bendebury 
Reviewed-by: Stefan Reinauer 
Signed-off-by: Furquan Shaikh 
Tested-by: Furquan Shaikh 
Reviewed-by: Aaron Durbin 
Reviewed-by: Justin TerAvest 
[zwisler: updated changelog for 2nd bug fix and upstream]
Signed-off-by: Ross Zwisler 
Reviewed-by: Guenter Roeck 
Signed-off-by: Greg Kroah-Hartman

firmware: vpd: fix spelling mistake "partion" -> "partition"

2018-09-25T18:20:58+00:00

Trivial fix to spelling mistake in comment

Signed-off-by: Colin Ian King 
Reviewed-by: Guenter Roeck 
Signed-off-by: Greg Kroah-Hartman

firmware: coreboot: Only populate devices in coreboot_table_init()

2018-09-14T13:37:23+00:00

This function checks the header for sanity, registers a bus, and
populates devices for each coreboot table entry. Let's just populate
devices here and pull the other bits up into the caller so that this
function can be repurposed for pure device creation and registration.

Cc: Wei-Ning Huang 
Cc: Julius Werner 
Cc: Brian Norris 
Cc: Samuel Holland 
Suggested-by: Julius Werner 
Signed-off-by: Stephen Boyd 
Reviewed-by: Julius Werner 
Signed-off-by: Greg Kroah-Hartman