linux-stable.git/drivers/firmware/efi, branch linux-3.16.y

efi: Use early_mem() instead of early_io()

2020-05-22T20:19:25+00:00

commit abc93f8eb6e46a480485f19256bdbda36ec78a84 upstream.

Use early_mem*() instead of early_io*() because all mapped EFI regions
are memory (usually RAM but they could also be ROM, EPROM, EEPROM, flash,
etc.) not I/O regions. Additionally, I/O family calls do not work correctly
under Xen in our case. early_ioremap() skips the PFN to MFN conversion
when building the PTE. Using it for memory will attempt to map the wrong
machine frame. However, all artificial EFI structures created under Xen
live in dom0 memory and should be mapped/unmapped using early_mem*() family
calls which map domain memory.

Signed-off-by: Daniel Kiper 
Cc: Leif Lindholm 
Cc: Mark Salter 
Signed-off-by: Matt Fleming 
Signed-off-by: Ben Hutchings

efi: cper: print AER info of PCIe fatal error

2019-12-10T18:01:11+00:00

commit b194a77fcc4001dc40aecdd15d249648e8a436d1 upstream.

AER info of PCIe fatal error is not printed in the current driver.
Because APEI driver will panic directly for fatal error, and can't
run to the place of printing AER info.

An example log is as following:
{763}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 11
{763}[Hardware Error]: event severity: fatal
{763}[Hardware Error]:  Error 0, type: fatal
{763}[Hardware Error]:   section_type: PCIe error
{763}[Hardware Error]:   port_type: 0, PCIe end point
{763}[Hardware Error]:   version: 4.0
{763}[Hardware Error]:   command: 0x0000, status: 0x0010
{763}[Hardware Error]:   device_id: 0000:82:00.0
{763}[Hardware Error]:   slot: 0
{763}[Hardware Error]:   secondary_bus: 0x00
{763}[Hardware Error]:   vendor_id: 0x8086, device_id: 0x10fb
{763}[Hardware Error]:   class_code: 000002
Kernel panic - not syncing: Fatal hardware error!

This issue was imported by the patch, '37448adfc7ce ("aerdrv: Move
cper_print_aer() call out of interrupt context")'. To fix this issue,
this patch adds print of AER info in cper_print_pcie() for fatal error.

Here is the example log after this patch applied:
{24}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 10
{24}[Hardware Error]: event severity: fatal
{24}[Hardware Error]:  Error 0, type: fatal
{24}[Hardware Error]:   section_type: PCIe error
{24}[Hardware Error]:   port_type: 0, PCIe end point
{24}[Hardware Error]:   version: 4.0
{24}[Hardware Error]:   command: 0x0546, status: 0x4010
{24}[Hardware Error]:   device_id: 0000:01:00.0
{24}[Hardware Error]:   slot: 0
{24}[Hardware Error]:   secondary_bus: 0x00
{24}[Hardware Error]:   vendor_id: 0x15b3, device_id: 0x1019
{24}[Hardware Error]:   class_code: 000002
{24}[Hardware Error]:   aer_uncor_status: 0x00040000, aer_uncor_mask: 0x00000000
{24}[Hardware Error]:   aer_uncor_severity: 0x00062010
{24}[Hardware Error]:   TLP Header: 000000c0 01010000 00000001 00000000
Kernel panic - not syncing: Fatal hardware error!

Fixes: 37448adfc7ce ("aerdrv: Move cper_print_aer() call out of interrupt context")
Signed-off-by: Xiaofei Tan 
Reviewed-by: James Morse 
[ardb: put parens around terms of && operator]
Signed-off-by: Ard Biesheuvel 
Signed-off-by: Ben Hutchings

efi: Move some sysfs files to be read-only by root

2018-03-03T15:51:46+00:00

commit af97a77bc01ce49a466f9d4c0125479e2e2230b6 upstream.

Thanks to the scripts/leaking_addresses.pl script, it was found that
some EFI values should not be readable by non-root users.

So make them root-only, and to do that, add a __ATTR_RO_MODE() macro to
make this easier, and use it in other places at the same time.

Reported-by: Linus Torvalds 
Tested-by: Dave Young 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Ard Biesheuvel 
Cc: H. Peter Anvin 
Cc: Matt Fleming 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20171206095010.24170-2-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar 
[bwh: Backported to 3.16: drop changes in esrt.c]
Signed-off-by: Ben Hutchings

efi/libstub: Allocate headspace in efi_get_memory_map()

2016-11-20T01:17:23+00:00

commit dadb57abc37499f565b23933dbf49b435c3ba8af upstream.

efi_get_memory_map() allocates a buffer to store the memory map that it
retrieves.  This buffer may need to be reused by the client after
ExitBootServices() is called, at which point allocations are not longer
permitted.  To support this usecase, provide the allocated buffer size back
to the client, and allocate some additional headroom to account for any
reasonable growth in the map that is likely to happen between the call to
efi_get_memory_map() and the client reusing the buffer.

Signed-off-by: Jeffrey Hugo 
Cc: Ard Biesheuvel 
Cc: Mark Rutland 
Cc: Leif Lindholm 
Cc: Ingo Molnar 
Signed-off-by: Matt Fleming 
[bwh: Backported to 3.16:
 - Adjust filenames, context
 - In allocate_new_fdt_and_exit_boot(), only fill memory_map
 - Drop changes to efi_random_alloc()]
Signed-off-by: Ben Hutchings

efi: Fix out-of-bounds read in variable_matches()

2016-06-15T20:29:26+00:00

commit 630ba0cc7a6dbafbdee43795617c872b35cde1b4 upstream.

The variable_matches() function can currently read "var_name[len]", for
example when:

 - var_name[0] == 'a',
 - len == 1
 - match_name points to the NUL-terminated string "ab".

This function is supposed to accept "var_name" inputs that are not
NUL-terminated (hence the "len" parameter"). Document the function, and
access "var_name[*match]" only if "*match" is smaller than "len".

Reported-by: Chris Wilson 
Signed-off-by: Laszlo Ersek 
Cc: Peter Jones 
Cc: Matthew Garrett 
Cc: Jason Andryuk 
Cc: Jani Nikula 
Link: http://thread.gmane.org/gmane.comp.freedesktop.xorg.drivers.intel/86906
Signed-off-by: Matt Fleming 
Signed-off-by: Ben Hutchings

efi: Add pstore variables to the deletion whitelist

2016-03-24T10:01:20+00:00

commit e246eb568bc4cbbdd8a30a3c11151ff9b7ca7312 upstream.

Laszlo explains why this is a good idea,

 'This is because the pstore filesystem can be backed by UEFI variables,
  and (for example) a crash might dump the last kilobytes of the dmesg
  into a number of pstore entries, each entry backed by a separate UEFI
  variable in the above GUID namespace, and with a variable name
  according to the above pattern.

  Please see "drivers/firmware/efi/efi-pstore.c".

  While this patch series will not prevent the user from deleting those
  UEFI variables via the pstore filesystem (i.e., deleting a pstore fs
  entry will continue to delete the backing UEFI variable), I think it
  would be nice to preserve the possibility for the sysadmin to delete
  Linux-created UEFI variables that carry portions of the crash log,
  *without* having to mount the pstore filesystem.'

There's also no chance of causing machines to become bricked by
deleting these variables, which is the whole purpose of excluding
things from the whitelist.

Use the LINUX_EFI_CRASH_GUID guid and a wildcard '*' for the match so
that we don't have to update the string in the future if new variable
name formats are created for crash dump variables.

Reported-by: Laszlo Ersek 
Acked-by: Peter Jones 
Tested-by: Peter Jones 
Cc: Matthew Garrett 
Cc: "Lee, Chun-Yi" 
Signed-off-by: Matt Fleming 
Signed-off-by: Luis Henriques

efi: Make efivarfs entries immutable by default

2016-03-24T10:01:20+00:00

commit ed8b0de5a33d2a2557dce7f9429dca8cb5bc5879 upstream.

"rm -rf" is bricking some peoples' laptops because of variables being
used to store non-reinitializable firmware driver data that's required
to POST the hardware.

These are 100% bugs, and they need to be fixed, but in the mean time it
shouldn't be easy to *accidentally* brick machines.

We have to have delete working, and picking which variables do and don't
work for deletion is quite intractable, so instead make everything
immutable by default (except for a whitelist), and make tools that
aren't quite so broad-spectrum unset the immutable flag.

Signed-off-by: Peter Jones 
Tested-by: Lee, Chun-Yi 
Acked-by: Matthew Garrett 
Signed-off-by: Matt Fleming 
[ luis: backported to 3.16:
  - use mutex_lock/unlock() instead of inode_lock/unlock()
  - use root->d_inode instead of d_inode()  ]
Signed-off-by: Luis Henriques

efi: Make our variable validation list include the guid

2016-03-24T10:01:19+00:00

commit 8282f5d9c17fe15a9e658c06e3f343efae1a2a2f upstream.

All the variables in this list so far are defined to be in the global
namespace in the UEFI spec, so this just further ensures we're
validating the variables we think we are.

Including the guid for entries will become more important in future
patches when we decide whether or not to allow deletion of variables
based on presence in this list.

Signed-off-by: Peter Jones 
Tested-by: Lee, Chun-Yi 
Acked-by: Matthew Garrett 
Signed-off-by: Matt Fleming 
Signed-off-by: Luis Henriques

efi: Do variable name validation tests in utf8