linux-stable.git/drivers/edac, branch v4.9.207

EDAC/altera: Use the proper type for the IRQ status bits

2019-10-05T10:30:20+00:00

[ Upstream commit 8faa1cf6ed82f33009f63986c3776cc48af1b7b2 ]

Smatch complains about the cast of a u32 pointer to unsigned long:

  drivers/edac/altera_edac.c:1878 altr_edac_a10_irq_handler()
  warn: passing casted pointer '&irq_status' to 'find_first_bit()'

This code wouldn't work on a 64 bit big endian system because it would
read past the end of &irq_status.

 [ bp: massage. ]

Fixes: 13ab8448d2c9 ("EDAC, altera: Add ECC Manager IRQ controller support")
Signed-off-by: Dan Carpenter 
Signed-off-by: Borislav Petkov 
Reviewed-by: Thor Thayer 
Cc: James Morse 
Cc: kernel-janitors@vger.kernel.org
Cc: linux-edac 
Cc: Mauro Carvalho Chehab 
Cc: Tony Luck 
Link: https://lkml.kernel.org/r/20190624134717.GA1754@mwanda
Signed-off-by: Sasha Levin

EDAC: Fix global-out-of-bounds write when setting edac_mc_poll_msec

2019-08-04T07:33:23+00:00

[ Upstream commit d8655e7630dafa88bc37f101640e39c736399771 ]

Commit 9da21b1509d8 ("EDAC: Poll timeout cannot be zero, p2") assumes
edac_mc_poll_msec to be unsigned long, but the type of the variable still
remained as int. Setting edac_mc_poll_msec can trigger out-of-bounds
write.

Reproducer:

  # echo 1001 > /sys/module/edac_core/parameters/edac_mc_poll_msec

KASAN report:

  BUG: KASAN: global-out-of-bounds in edac_set_poll_msec+0x140/0x150
  Write of size 8 at addr ffffffffb91b2d00 by task bash/1996

  CPU: 1 PID: 1996 Comm: bash Not tainted 5.2.0-rc6+ #23
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-2.fc30 04/01/2014
  Call Trace:
   dump_stack+0xca/0x13e
   print_address_description.cold+0x5/0x246
   __kasan_report.cold+0x75/0x9a
   ? edac_set_poll_msec+0x140/0x150
   kasan_report+0xe/0x20
   edac_set_poll_msec+0x140/0x150
   ? dimmdev_location_show+0x30/0x30
   ? vfs_lock_file+0xe0/0xe0
   ? _raw_spin_lock+0x87/0xe0
   param_attr_store+0x1b5/0x310
   ? param_array_set+0x4f0/0x4f0
   module_attr_store+0x58/0x80
   ? module_attr_show+0x80/0x80
   sysfs_kf_write+0x13d/0x1a0
   kernfs_fop_write+0x2bc/0x460
   ? sysfs_kf_bin_read+0x270/0x270
   ? kernfs_notify+0x1f0/0x1f0
   __vfs_write+0x81/0x100
   vfs_write+0x1e1/0x560
   ksys_write+0x126/0x250
   ? __ia32_sys_read+0xb0/0xb0
   ? do_syscall_64+0x1f/0x390
   do_syscall_64+0xc1/0x390
   entry_SYSCALL_64_after_hwframe+0x49/0xbe
  RIP: 0033:0x7fa7caa5e970
  Code: 73 01 c3 48 8b 0d 28 d5 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 99 2d 2c 00 00 75 10 b8 01 00 00 00 04
  RSP: 002b:00007fff6acfdfe8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
  RAX: ffffffffffffffda RBX: 0000000000000005 RCX: 00007fa7caa5e970
  RDX: 0000000000000005 RSI: 0000000000e95c08 RDI: 0000000000000001
  RBP: 0000000000e95c08 R08: 00007fa7cad1e760 R09: 00007fa7cb36a700
  R10: 0000000000000073 R11: 0000000000000246 R12: 0000000000000005
  R13: 0000000000000001 R14: 00007fa7cad1d600 R15: 0000000000000005

  The buggy address belongs to the variable:
   edac_mc_poll_msec+0x0/0x40

  Memory state around the buggy address:
   ffffffffb91b2c00: 00 00 00 00 fa fa fa fa 00 00 00 00 fa fa fa fa
   ffffffffb91b2c80: 00 00 00 00 fa fa fa fa 00 00 00 00 fa fa fa fa
  >ffffffffb91b2d00: 04 fa fa fa fa fa fa fa 04 fa fa fa fa fa fa fa
                     ^
   ffffffffb91b2d80: 04 fa fa fa fa fa fa fa 00 00 00 00 00 00 00 00
   ffffffffb91b2e00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Fix it by changing the type of edac_mc_poll_msec to unsigned int.
The reason why this patch adopts unsigned int rather than unsigned long
is msecs_to_jiffies() assumes arg to be unsigned int. We can avoid
integer conversion bugs and unsigned int will be large enough for
edac_mc_poll_msec.

Reviewed-by: James Morse 
Fixes: 9da21b1509d8 ("EDAC: Poll timeout cannot be zero, p2")
Signed-off-by: Eiichi Tsukata 
Signed-off-by: Tony Luck 
Signed-off-by: Sasha Levin

EDAC/sysfs: Fix memory leak when creating a csrow object

2019-08-04T07:33:20+00:00

[ Upstream commit 585fb3d93d32dbe89e718b85009f9c322cc554cd ]

In edac_create_csrow_object(), the reference to the object is not
released when adding the device to the device hierarchy fails
(device_add()). This may result in a memory leak.

Signed-off-by: Pan Bian 
Signed-off-by: Borislav Petkov 
Reviewed-by: Greg Kroah-Hartman 
Cc: James Morse 
Cc: Mauro Carvalho Chehab 
Cc: linux-edac 
Link: https://lkml.kernel.org/r/1555554438-103953-1-git-send-email-bianpan2016@163.com
Signed-off-by: Sasha Levin

EDAC, skx_edac: Fix logical channel intermediate decoding

2018-11-13T19:16:56+00:00

commit 8f18973877204dc8ca4ce1004a5d28683b9a7086 upstream.

The code "lchan = (lchan << 1) | ~lchan" for logical channel
intermediate decoding is wrong. The wrong intermediate decoding
result is {0xffffffff, 0xfffffffe}.

Fix it by replacing '~' with '!'. The correct intermediate
decoding result is {0x1, 0x2}.

Signed-off-by: Qiuxu Zhuo 
Signed-off-by: Tony Luck 
Signed-off-by: Borislav Petkov 
CC: Aristeu Rozanski 
CC: Mauro Carvalho Chehab 
CC: linux-edac 
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20181009172025.18594-1-tony.luck@intel.com
Signed-off-by: Greg Kroah-Hartman

EDAC, {i7core,sb,skx}_edac: Fix uncorrected error counting

2018-11-13T19:16:56+00:00

commit 432de7fd7630c84ad24f1c2acd1e3bb4ce3741ca upstream.

The count of errors is picked up from bits 52:38 of the machine check
bank status register. But this is the count of *corrected* errors. If an
uncorrected error is being logged, the h/w sets this field to 0. Which
means that when edac_mc_handle_error() is called, the EDAC core will
carefully add zero to the appropriate uncorrected error counts.

Signed-off-by: Tony Luck 
[ Massage commit message. ]
Signed-off-by: Borislav Petkov 
Cc: stable@vger.kernel.org
Cc: Aristeu Rozanski 
Cc: Mauro Carvalho Chehab 
Cc: Qiuxu Zhuo 
Cc: linux-edac 
Link: http://lkml.kernel.org/r/20180928213934.19890-1-tony.luck@intel.com
Signed-off-by: Greg Kroah-Hartman

EDAC: Fix memleak in module init error path

2018-10-04T00:01:48+00:00

[ Upstream commit 4708aa85d50cc6e962dfa8acf5ad4e0d290a21db ]

Make sure to use put_device() to free the initialised struct device so
that resources managed by driver core also gets released in the event of
a registration failure.

Signed-off-by: Johan Hovold 
Cc: Denis Kirjanov 
Cc: Mauro Carvalho Chehab 
Cc: linux-edac 
Fixes: 2d56b109e3a5 ("EDAC: Handle error path in edac_mc_sysfs_init() properly")
Link: http://lkml.kernel.org/r/20180612124335.6420-1-johan@kernel.org
Signed-off-by: Borislav Petkov 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

EDAC, i7core: Fix memleaks and use-after-free on probe and remove

2018-10-04T00:01:48+00:00

[ Upstream commit 6c974d4dfafe5e9ee754f2a6fba0eb1864f1649e ]

Make sure to free and deregister the addrmatch and chancounts devices
allocated during probe in all error paths. Also fix use-after-free in a
probe error path and in the remove success path where the devices were
being put before before deregistration.

Signed-off-by: Johan Hovold 
Cc: Mauro Carvalho Chehab 
Cc: linux-edac 
Fixes: 356f0a30860d ("i7core_edac: change the mem allocation scheme to make Documentation/kobject.txt happy")
Link: http://lkml.kernel.org/r/20180612124335.6420-2-johan@kernel.org
Signed-off-by: Borislav Petkov 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

EDAC, altera: Fix ARM64 build warning

2018-08-03T05:55:21+00:00

[ Upstream commit 9ef20753e044f7468c4113e5aecd785419b0b3cc ]

The kbuild test robot reported the following warning:

  drivers/edac/altera_edac.c: In function 'ocram_free_mem':
  drivers/edac/altera_edac.c:1410:42: warning: cast from pointer to integer
	of different size [-Wpointer-to-int-cast]
    gen_pool_free((struct gen_pool *)other, (u32)p, size);
                                             ^

After adding support for ARM64 architectures, the unsigned long
parameter is 64 bits and causes a build warning on 64-bit configs. Fix
by casting to the correct size (unsigned long) instead of u32.

Reported-by: kbuild test robot 
Signed-off-by: Thor Thayer 
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-edac 
Fixes: c3eea1942a16 ("EDAC, altera: Add Altera L2 cache and OCRAM support")
Link: http://lkml.kernel.org/r/1526317441-4996-1-git-send-email-thor.thayer@linux.intel.com
Signed-off-by: Borislav Petkov 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

EDAC, mv64x60: Fix an error handling path

2018-04-13T17:48:30+00:00

[ Upstream commit 68fa24f9121c04ef146b5158f538c8b32f285be5 ]

We should not call edac_mc_del_mc() if a corresponding call to
edac_mc_add_mc() has not been performed yet.

So here, we should go to err instead of err2 to branch at the right
place of the error handling path.

Signed-off-by: Christophe JAILLET 
Cc: linux-edac 
Link: http://lkml.kernel.org/r/20180107205400.14068-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Borislav Petkov 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

EDAC, altera: Fix peripheral warnings for Cyclone5

2018-03-22T08:17:48+00:00

[ Upstream commit 25b223ddfe2a557307c05fe673e09d94ae950877 ]

The peripherals' RAS functionality only exist on the Arria10 SoCFPGA.
The Cyclone5 initialization generates EDAC warnings when the peripherals
aren't found in the device tree. Fix by checking for Arria10 in the init
functions.

Signed-off-by: Thor Thayer 
Cc: linux-edac 
Link: http://lkml.kernel.org/r/1491415262-5018-1-git-send-email-thor.thayer@linux.intel.com
Signed-off-by: Borislav Petkov 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman