linux-stable.git/drivers/dma, branch v5.7.10 Linux kernel stable tree dmaengine: fsl-edma-common: correct DSIZE_32BYTE 2020-07-22T07:34:24+00:00 Robin Gong yibin.gong@nxp.com 2020-06-29T16:59:58+00:00 5e3e3d374c89b85e15cb5dfae80598f63376b31e commit e142087b15960a4e1e5932942e5abae1f49d2318 upstream. Correct EDMA_TCD_ATTR_DSIZE_32BYTE define since it's broken by the below: '0x0005 --> BIT(3) | BIT(0))' Fixes: 4d6d3a90e4ac ("dmaengine: fsl-edma: fix macros") Signed-off-by: Robin Gong <yibin.gong@nxp.com> Tested-by: Angelo Dureghello <angelo@sysam.it> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/1593449998-32091-1-git-send-email-yibin.gong@nxp.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit e142087b15960a4e1e5932942e5abae1f49d2318 upstream.

Correct EDMA_TCD_ATTR_DSIZE_32BYTE define since it's broken by the below:
'0x0005 --> BIT(3) | BIT(0))'

Fixes: 4d6d3a90e4ac ("dmaengine: fsl-edma: fix macros")
Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Tested-by: Angelo Dureghello <angelo@sysam.it>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/1593449998-32091-1-git-send-email-yibin.gong@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dmaengine: mcf-edma: Fix NULL pointer exception in mcf_edma_tx_handler 2020-07-22T07:34:24+00:00 Krzysztof Kozlowski krzk@kernel.org 2020-06-11T13:21:05+00:00 36e4fa9dfaa83605d7070944a42c8af88cae40ab commit 8995aa3d164ddd9200e6abcf25c449cf5298c858 upstream. On Toradex Colibri VF50 (Vybrid VF5xx) with fsl-edma driver NULL pointer exception happens occasionally on serial output initiated by login timeout. This was reproduced only if kernel was built with significant debugging options and EDMA driver is used with serial console. Issue looks like a race condition between interrupt handler fsl_edma_tx_handler() (called as a result of fsl_edma_xfer_desc()) and terminating the transfer with fsl_edma_terminate_all(). The fsl_edma_tx_handler() handles interrupt for a transfer with already freed edesc and idle==true. The mcf-edma driver shares design and lot of code with fsl-edma. It looks like being affected by same problem. Fix this pattern the same way as fix for fsl-edma driver. Fixes: e7a3ff92eaf1 ("dmaengine: fsl-edma: add ColdFire mcf5441x edma support") Cc: <stable@vger.kernel.org> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Robin Gong <yibin.gong@nxp.com> Link: https://lore.kernel.org/r/1591881665-25592-1-git-send-email-krzk@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 8995aa3d164ddd9200e6abcf25c449cf5298c858 upstream.

On Toradex Colibri VF50 (Vybrid VF5xx) with fsl-edma driver NULL pointer
exception happens occasionally on serial output initiated by login
timeout.

This was reproduced only if kernel was built with significant debugging
options and EDMA driver is used with serial console.

Issue looks like a race condition between interrupt handler
fsl_edma_tx_handler() (called as a result of fsl_edma_xfer_desc()) and
terminating the transfer with fsl_edma_terminate_all().

The fsl_edma_tx_handler() handles interrupt for a transfer with already
freed edesc and idle==true.

The mcf-edma driver shares design and lot of code with fsl-edma.  It
looks like being affected by same problem.  Fix this pattern the same
way as fix for fsl-edma driver.

Fixes: e7a3ff92eaf1 ("dmaengine: fsl-edma: add ColdFire mcf5441x edma support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Robin Gong <yibin.gong@nxp.com>
Link: https://lore.kernel.org/r/1591881665-25592-1-git-send-email-krzk@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dmaengine: fsl-edma: Fix NULL pointer exception in fsl_edma_tx_handler 2020-07-22T07:34:24+00:00 Krzysztof Kozlowski krzk@kernel.org 2020-06-11T12:17:41+00:00 182fa842fd8533f11d00e2b1c3387d8f1c301c76 commit f5e5677c420346b4e9788051c2e4d750996c428c upstream. NULL pointer exception happens occasionally on serial output initiated by login timeout. This was reproduced only if kernel was built with significant debugging options and EDMA driver is used with serial console. col-vf50 login: root Password: Login timed out after 60 seconds. Unable to handle kernel NULL pointer dereference at virtual address 00000044 Internal error: Oops: 5 [#1] ARM CPU: 0 PID: 157 Comm: login Not tainted 5.7.0-next-20200610-dirty #4 Hardware name: Freescale Vybrid VF5xx/VF6xx (Device Tree) (fsl_edma_tx_handler) from [<8016eb10>] (__handle_irq_event_percpu+0x64/0x304) (__handle_irq_event_percpu) from [<8016eddc>] (handle_irq_event_percpu+0x2c/0x7c) (handle_irq_event_percpu) from [<8016ee64>] (handle_irq_event+0x38/0x5c) (handle_irq_event) from [<801729e4>] (handle_fasteoi_irq+0xa4/0x160) (handle_fasteoi_irq) from [<8016ddcc>] (generic_handle_irq+0x34/0x44) (generic_handle_irq) from [<8016e40c>] (__handle_domain_irq+0x54/0xa8) (__handle_domain_irq) from [<80508bc8>] (gic_handle_irq+0x4c/0x80) (gic_handle_irq) from [<80100af0>] (__irq_svc+0x70/0x98) Exception stack(0x8459fe80 to 0x8459fec8) fe80: 72286b00 e3359f64 00000001 0000412d a0070013 85c98840 85c98840 a0070013 fea0: 8054e0d4 00000000 00000002 00000000 00000002 8459fed0 8081fbe8 8081fbec fec0: 60070013 ffffffff (__irq_svc) from [<8081fbec>] (_raw_spin_unlock_irqrestore+0x30/0x58) (_raw_spin_unlock_irqrestore) from [<8056cb48>] (uart_flush_buffer+0x88/0xf8) (uart_flush_buffer) from [<80554e60>] (tty_ldisc_hangup+0x38/0x1ac) (tty_ldisc_hangup) from [<8054c7f4>] (__tty_hangup+0x158/0x2bc) (__tty_hangup) from [<80557b90>] (disassociate_ctty.part.1+0x30/0x23c) (disassociate_ctty.part.1) from [<8011fc18>] (do_exit+0x580/0xba0) (do_exit) from [<801214f8>] (do_group_exit+0x3c/0xb4) (do_group_exit) from [<80121580>] (__wake_up_parent+0x0/0x14) Issue looks like race condition between interrupt handler fsl_edma_tx_handler() (called as result of fsl_edma_xfer_desc()) and terminating the transfer with fsl_edma_terminate_all(). The fsl_edma_tx_handler() handles interrupt for a transfer with already freed edesc and idle==true. Fixes: d6be34fbd39b ("dma: Add Freescale eDMA engine driver support") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Robin Gong <yibin.gong@nxp.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/1591877861-28156-2-git-send-email-krzk@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit f5e5677c420346b4e9788051c2e4d750996c428c upstream.

NULL pointer exception happens occasionally on serial output initiated
by login timeout.  This was reproduced only if kernel was built with
significant debugging options and EDMA driver is used with serial
console.

    col-vf50 login: root
    Password:
    Login timed out after 60 seconds.
    Unable to handle kernel NULL pointer dereference at virtual address 00000044
    Internal error: Oops: 5 [#1] ARM
    CPU: 0 PID: 157 Comm: login Not tainted 5.7.0-next-20200610-dirty #4
    Hardware name: Freescale Vybrid VF5xx/VF6xx (Device Tree)
      (fsl_edma_tx_handler) from [<8016eb10>] (__handle_irq_event_percpu+0x64/0x304)
      (__handle_irq_event_percpu) from [<8016eddc>] (handle_irq_event_percpu+0x2c/0x7c)
      (handle_irq_event_percpu) from [<8016ee64>] (handle_irq_event+0x38/0x5c)
      (handle_irq_event) from [<801729e4>] (handle_fasteoi_irq+0xa4/0x160)
      (handle_fasteoi_irq) from [<8016ddcc>] (generic_handle_irq+0x34/0x44)
      (generic_handle_irq) from [<8016e40c>] (__handle_domain_irq+0x54/0xa8)
      (__handle_domain_irq) from [<80508bc8>] (gic_handle_irq+0x4c/0x80)
      (gic_handle_irq) from [<80100af0>] (__irq_svc+0x70/0x98)
    Exception stack(0x8459fe80 to 0x8459fec8)
    fe80: 72286b00 e3359f64 00000001 0000412d a0070013 85c98840 85c98840 a0070013
    fea0: 8054e0d4 00000000 00000002 00000000 00000002 8459fed0 8081fbe8 8081fbec
    fec0: 60070013 ffffffff
      (__irq_svc) from [<8081fbec>] (_raw_spin_unlock_irqrestore+0x30/0x58)
      (_raw_spin_unlock_irqrestore) from [<8056cb48>] (uart_flush_buffer+0x88/0xf8)
      (uart_flush_buffer) from [<80554e60>] (tty_ldisc_hangup+0x38/0x1ac)
      (tty_ldisc_hangup) from [<8054c7f4>] (__tty_hangup+0x158/0x2bc)
      (__tty_hangup) from [<80557b90>] (disassociate_ctty.part.1+0x30/0x23c)
      (disassociate_ctty.part.1) from [<8011fc18>] (do_exit+0x580/0xba0)
      (do_exit) from [<801214f8>] (do_group_exit+0x3c/0xb4)
      (do_group_exit) from [<80121580>] (__wake_up_parent+0x0/0x14)

Issue looks like race condition between interrupt handler fsl_edma_tx_handler()
(called as result of fsl_edma_xfer_desc()) and terminating the transfer with
fsl_edma_terminate_all().

The fsl_edma_tx_handler() handles interrupt for a transfer with already freed
edesc and idle==true.

Fixes: d6be34fbd39b ("dma: Add Freescale eDMA engine driver support")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Robin Gong <yibin.gong@nxp.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1591877861-28156-2-git-send-email-krzk@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dmaengine: ti: k3-udma: Disable memcopy via MCU NAVSS on am654 2020-07-22T07:34:11+00:00 Peter Ujfalusi peter.ujfalusi@ti.com 2020-03-27T14:42:28+00:00 0e54b8db0ceb27cd22c175b21f8b190a488a516d commit a4e688535a0829980d5ef1516c0713777a874c62 upstream. Trace of a test for DMA memcpy domains slipped into the glue layer commit. The memcpy support should be disabled on the MCU UDMAP. Fixes: d702419134133 ("dmaengine: ti: k3-udma: Add glue layer for non DMAengine users") Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20200327144228.11101-1-peter.ujfalusi@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit a4e688535a0829980d5ef1516c0713777a874c62 upstream.

Trace of a test for DMA memcpy domains slipped into the glue layer commit.
The memcpy support should be disabled on the MCU UDMAP.

Fixes: d702419134133 ("dmaengine: ti: k3-udma: Add glue layer for non DMAengine users")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20200327144228.11101-1-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dmaengine: dmatest: stop completed threads when running without set channel 2020-07-22T07:34:08+00:00 Peter Ujfalusi peter.ujfalusi@ti.com 2020-07-01T10:12:25+00:00 a65230dc5a22d4a7f7b5ebd94b6927088b9755fe [ Upstream commit fd17d1abce426b4224a916a242b57be94272771b ] The completed threads were not cleared and consequent run would result threads accumulating: echo 800000 > /sys/module/dmatest/parameters/test_buf_size echo 2000 > /sys/module/dmatest/parameters/timeout echo 50 > /sys/module/dmatest/parameters/iterations echo 1 > /sys/module/dmatest/parameters/max_channels echo "" > /sys/module/dmatest/parameters/channel [ 237.507265] dmatest: Added 1 threads using dma1chan2 echo 1 > /sys/module/dmatest/parameters/run [ 244.713360] dmatest: Started 1 threads using dma1chan2 [ 246.117680] dmatest: dma1chan2-copy0: summary 50 tests, 0 failures 2437.47 iops 977623 KB/s (0) echo 1 > /sys/module/dmatest/parameters/run [ 292.381471] dmatest: No channels configured, continue with any [ 292.389307] dmatest: Added 1 threads using dma1chan3 [ 292.394302] dmatest: Started 1 threads using dma1chan2 [ 292.399454] dmatest: Started 1 threads using dma1chan3 [ 293.800835] dmatest: dma1chan3-copy0: summary 50 tests, 0 failures 2624.53 iops 975014 KB/s (0) echo 1 > /sys/module/dmatest/parameters/run [ 307.301429] dmatest: No channels configured, continue with any [ 307.309212] dmatest: Added 1 threads using dma1chan4 [ 307.314197] dmatest: Started 1 threads using dma1chan2 [ 307.319343] dmatest: Started 1 threads using dma1chan3 [ 307.324492] dmatest: Started 1 threads using dma1chan4 [ 308.730773] dmatest: dma1chan4-copy0: summary 50 tests, 0 failures 2390.28 iops 965436 KB/s (0) Fixes: 6b41030fdc79 ("dmaengine: dmatest: Restore default for channel") Reported-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20200701101225.8607-1-peter.ujfalusi@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit fd17d1abce426b4224a916a242b57be94272771b ]

The completed threads were not cleared and consequent run would result
threads accumulating:

echo 800000 > /sys/module/dmatest/parameters/test_buf_size
echo 2000 > /sys/module/dmatest/parameters/timeout
echo 50 > /sys/module/dmatest/parameters/iterations
echo 1 > /sys/module/dmatest/parameters/max_channels
echo "" > /sys/module/dmatest/parameters/channel
[  237.507265] dmatest: Added 1 threads using dma1chan2
echo 1 > /sys/module/dmatest/parameters/run
[  244.713360] dmatest: Started 1 threads using dma1chan2
[  246.117680] dmatest: dma1chan2-copy0: summary 50 tests, 0 failures 2437.47 iops 977623 KB/s (0)

echo 1 > /sys/module/dmatest/parameters/run
[  292.381471] dmatest: No channels configured, continue with any
[  292.389307] dmatest: Added 1 threads using dma1chan3
[  292.394302] dmatest: Started 1 threads using dma1chan2
[  292.399454] dmatest: Started 1 threads using dma1chan3
[  293.800835] dmatest: dma1chan3-copy0: summary 50 tests, 0 failures 2624.53 iops 975014 KB/s (0)

echo 1 > /sys/module/dmatest/parameters/run
[  307.301429] dmatest: No channels configured, continue with any
[  307.309212] dmatest: Added 1 threads using dma1chan4
[  307.314197] dmatest: Started 1 threads using dma1chan2
[  307.319343] dmatest: Started 1 threads using dma1chan3
[  307.324492] dmatest: Started 1 threads using dma1chan4
[  308.730773] dmatest: dma1chan4-copy0: summary 50 tests, 0 failures 2390.28 iops 965436 KB/s (0)

Fixes: 6b41030fdc79 ("dmaengine: dmatest: Restore default for channel")
Reported-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20200701101225.8607-1-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
dmaengine: dw: Initialize channel before each transfer 2020-07-22T07:34:08+00:00 Andy Shevchenko andriy.shevchenko@linux.intel.com 2020-07-05T11:56:20+00:00 838f21b2e14d6d555aade5f2ece41be09750f0b3 [ Upstream commit 99ba8b9b0d9780e9937eb1d488d120e9e5c2533d ] In some cases DMA can be used only with a consumer which does runtime power management and on the platforms, that have DMA auto power gating logic (see comments in the drivers/acpi/acpi_lpss.c), may result in DMA losing its context. Simple mitigation of this issue is to initialize channel each time the consumer initiates a transfer. Fixes: cfdf5b6cc598 ("dw_dmac: add support for Lynxpoint DMA controllers") Reported-by: Tsuchiya Yuto <kitakar@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206403 Link: https://lore.kernel.org/r/20200705115620.51929-1-andriy.shevchenko@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 99ba8b9b0d9780e9937eb1d488d120e9e5c2533d ]

In some cases DMA can be used only with a consumer which does runtime power
management and on the platforms, that have DMA auto power gating logic
(see comments in the drivers/acpi/acpi_lpss.c), may result in DMA losing
its context. Simple mitigation of this issue is to initialize channel
each time the consumer initiates a transfer.

Fixes: cfdf5b6cc598 ("dw_dmac: add support for Lynxpoint DMA controllers")
Reported-by: Tsuchiya Yuto <kitakar@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206403
Link: https://lore.kernel.org/r/20200705115620.51929-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
dmaengine: idxd: fix misc interrupt handler thread unmasking 2020-07-22T07:34:07+00:00 Dave Jiang dave.jiang@intel.com 2020-06-25T19:16:54+00:00 f19eeb88a54abdfdee39766000c88c9b37f0bd89 [ Upstream commit e3122822a74033ba8d6d9af855078f9ab741e33f ] Fix unmasking of misc interrupt handler when completing normal. It exits early and skips the unmasking with the current implementation. Fix to unmask interrupt when exiting normally. Fixes: bfe1d56091c1 ("dmaengine: idxd: Init and probe for Intel data accelerators") Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/159311256528.855.11527922406329728512.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit e3122822a74033ba8d6d9af855078f9ab741e33f ]

Fix unmasking of misc interrupt handler when completing normal. It exits
early and skips the unmasking with the current implementation. Fix to
unmask interrupt when exiting normally.

Fixes: bfe1d56091c1 ("dmaengine: idxd: Init and probe for Intel data accelerators")
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/159311256528.855.11527922406329728512.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
dmaengine: idxd: cleanup workqueue config after disabling 2020-07-22T07:34:07+00:00 Dave Jiang dave.jiang@intel.com 2020-06-25T19:17:42+00:00 2a2df2bd10de44c3804661ed15157817c12d6291 [ Upstream commit da32b28c95a79e399e18c03f8178f41aec9c66e4 ] After disabling a device, we should clean up the internal state for the wqs and zero out the configuration registers. Without doing so can cause issues when the user reprogram the wqs. Fixes: c52ca478233c ("dmaengine: idxd: add configuration component of driver") Reported-by: Yixin Zhang <yixin.zhang@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Tested-by: Yixin Zhang <yixin.zhang@intel.com> Link: https://lore.kernel.org/r/159311264246.1198.11955791213681679428.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit da32b28c95a79e399e18c03f8178f41aec9c66e4 ]

After disabling a device, we should clean up the internal state for
the wqs and zero out the configuration registers. Without doing so can cause
issues when the user reprogram the wqs.

Fixes: c52ca478233c ("dmaengine: idxd: add configuration component of driver")
Reported-by: Yixin Zhang <yixin.zhang@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Tested-by: Yixin Zhang <yixin.zhang@intel.com>
Link: https://lore.kernel.org/r/159311264246.1198.11955791213681679428.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
dmaengine: sh: usb-dmac: set tx_result parameters 2020-07-22T07:34:06+00:00 Yoshihiro Shimoda yoshihiro.shimoda.uh@renesas.com 2020-06-18T12:07:33+00:00 0e70973009d86fe281b5c917242759b724a4a62d [ Upstream commit 466257d9968ac79575831250b039dc07566c7b13 ] A client driver (renesas_usbhs) assumed that dmaengine_tx_status() could return the residue even if the transfer was completed. However, this was not correct usage [1] and this caused to break getting the residue after the commit 24461d9792c2 ("dmaengine: virt-dma: Fix access after free in vchan_complete()") actually. So, this is possible to get wrong received size if the usb controller gets a short packet. For example, g_zero driver causes "bad OUT byte" errors. To use the tx_result from the renesas_usbhs driver when the transfer is completed, set the tx_result parameters. Notes that the renesas_usbhs driver needs to update for it. [1] https://lore.kernel.org/dmaengine/20200616165550.GP2324254@vkoul-mobl/ Reported-by: Hien Dang <hien.dang.eb@renesas.com> Fixes: 24461d9792c2 ("dmaengine: virt-dma: Fix access after free in vchan_complete()") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/1592482053-19433-1-git-send-email-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 466257d9968ac79575831250b039dc07566c7b13 ]

A client driver (renesas_usbhs) assumed that
dmaengine_tx_status() could return the residue even if
the transfer was completed. However, this was not correct
usage [1] and this caused to break getting the residue after
the commit 24461d9792c2 ("dmaengine: virt-dma: Fix access after
free in vchan_complete()") actually. So, this is possible to get
wrong received size if the usb controller gets a short packet.
For example, g_zero driver causes "bad OUT byte" errors.

To use the tx_result from the renesas_usbhs driver when
the transfer is completed, set the tx_result parameters.

Notes that the renesas_usbhs driver needs to update for it.

[1]
https://lore.kernel.org/dmaengine/20200616165550.GP2324254@vkoul-mobl/

Reported-by: Hien Dang <hien.dang.eb@renesas.com>
Fixes: 24461d9792c2 ("dmaengine: virt-dma: Fix access after free in vchan_complete()")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/1592482053-19433-1-git-send-email-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
dmaengine: ti: k3-udma: Fix delayed_work usage for tx drain workaround 2020-07-22T07:34:06+00:00 Peter Ujfalusi peter.ujfalusi@ti.com 2020-06-18T11:40:04+00:00 accad539193e980ced538a36f9a0b42a708e9437 [ Upstream commit d964d5ff68dba21b53368656adec3fb5f50426bb ] INIT_DELAYED_WORK_ONSTACK() must be used with on-stack delayed work, which is not the case here. Use normal delayed_work for the channels instead. Fixes: 25dcb5dd7b7c ("dmaengine: ti: New driver for K3 UDMA") Reported-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20200618114004.6268-1-peter.ujfalusi@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit d964d5ff68dba21b53368656adec3fb5f50426bb ]

INIT_DELAYED_WORK_ONSTACK() must be used with on-stack delayed work, which
is not the case here.
Use normal delayed_work for the channels instead.

Fixes: 25dcb5dd7b7c ("dmaengine: ti: New driver for K3 UDMA")
Reported-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20200618114004.6268-1-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>