linux-stable.git/drivers/dma, branch v5.4.64 Linux kernel stable tree dmaengine: dw-edma: Fix scatter-gather address calculation 2020-09-09T17:12:35+00:00 Gustavo Pimentel Gustavo.Pimentel@synopsys.com 2020-08-13T14:14:04+00:00 f84804af09c7219336a1f472a049755add2d45ce commit 05655541c9503bfd01af4e6cbd7f5a29ac748e6c upstream. Fix the source and destination physical address calculation of a peripheral device on scatter-gather implementation. This issue manifested during tests using a 64 bits architecture system. The abnormal behavior wasn't visible before due to all previous tests were done using 32 bits architecture system, that masked his effect. Fixes: e63d79d1ffcd ("dmaengine: Add Synopsys eDMA IP core driver") Cc: stable@vger.kernel.org Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Link: https://lore.kernel.org/r/8d3ab7e2ba96563fe3495b32f60077fffb85307d.1597327623.git.gustavo.pimentel@synopsys.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 05655541c9503bfd01af4e6cbd7f5a29ac748e6c upstream.

Fix the source and destination physical address calculation of a
peripheral device on scatter-gather implementation.

This issue manifested during tests using a 64 bits architecture system.
The abnormal behavior wasn't visible before due to all previous tests
were done using 32 bits architecture system, that masked his effect.

Fixes: e63d79d1ffcd ("dmaengine: Add Synopsys eDMA IP core driver")
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Link: https://lore.kernel.org/r/8d3ab7e2ba96563fe3495b32f60077fffb85307d.1597327623.git.gustavo.pimentel@synopsys.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dmaengine: pl330: Fix burst length if burst size is smaller than bus width 2020-09-09T17:12:25+00:00 Marek Szyprowski m.szyprowski@samsung.com 2020-08-25T06:46:17+00:00 24249fab08c618d3af8cd42ee10695866989bbe0 [ Upstream commit 0661cef675d37e2c4b66a996389ebeae8568e49e ] Move the burst len fixup after setting the generic value for it. This finally enables the fixup introduced by commit 137bd11090d8 ("dmaengine: pl330: Align DMA memcpy operations to MFIFO width"), which otherwise was overwritten by the generic value. Reported-by: kernel test robot <lkp@intel.com> Fixes: 137bd11090d8 ("dmaengine: pl330: Align DMA memcpy operations to MFIFO width") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20200825064617.16193-1-m.szyprowski@samsung.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 0661cef675d37e2c4b66a996389ebeae8568e49e ]

Move the burst len fixup after setting the generic value for it. This
finally enables the fixup introduced by commit 137bd11090d8 ("dmaengine:
pl330: Align DMA memcpy operations to MFIFO width"), which otherwise was
overwritten by the generic value.

Reported-by: kernel test robot <lkp@intel.com>
Fixes: 137bd11090d8 ("dmaengine: pl330: Align DMA memcpy operations to MFIFO width")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20200825064617.16193-1-m.szyprowski@samsung.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
dmaengine: at_hdmac: check return value of of_find_device_by_node() in at_dma_xlate() 2020-09-09T17:12:23+00:00 Yu Kuai yukuai3@huawei.com 2020-08-17T11:57:26+00:00 242a7ab0ac5296b11211f3851632502e269f2d69 [ Upstream commit 0cef8e2c5a07d482ec907249dbd6687e8697677f ] The reurn value of of_find_device_by_node() is not checked, thus null pointer dereference will be triggered if of_find_device_by_node() failed. Fixes: bbe89c8e3d59 ("at_hdmac: move to generic DMA binding") Signed-off-by: Yu Kuai <yukuai3@huawei.com> Link: https://lore.kernel.org/r/20200817115728.1706719-2-yukuai3@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 0cef8e2c5a07d482ec907249dbd6687e8697677f ]

The reurn value of of_find_device_by_node() is not checked, thus null
pointer dereference will be triggered if of_find_device_by_node()
failed.

Fixes: bbe89c8e3d59 ("at_hdmac: move to generic DMA binding")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20200817115728.1706719-2-yukuai3@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
dmaengine: of-dma: Fix of_dma_router_xlate's of_dma_xlate handling 2020-09-09T17:12:23+00:00 Peter Ujfalusi peter.ujfalusi@ti.com 2020-08-06T10:49:28+00:00 89cb604c422694afb3ffdc39d51705e6091eb57b [ Upstream commit 5b2aa9f918f6837ae943557f8cec02c34fcf80e7 ] of_dma_xlate callback can return ERR_PTR as well NULL in case of failure. If error code is returned (not NULL) then the route should be released and the router should not be registered for the channel. Fixes: 56f13c0d9524c ("dmaengine: of_dma: Support for DMA routers") Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20200806104928.25975-1-peter.ujfalusi@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 5b2aa9f918f6837ae943557f8cec02c34fcf80e7 ]

of_dma_xlate callback can return ERR_PTR as well NULL in case of failure.

If error code is returned (not NULL) then the route should be released and
the router should not be registered for the channel.

Fixes: 56f13c0d9524c ("dmaengine: of_dma: Support for DMA routers")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20200806104928.25975-1-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
fsldma: fix very broken 32-bit ppc ioread64 functionality 2020-09-09T17:12:22+00:00 Linus Torvalds torvalds@linux-foundation.org 2020-08-29T20:50:56+00:00 1a89606baf3118a3afd970f9e250d619e91a2459 [ Upstream commit 0a4c56c80f90797e9b9f8426c6aae4c0cf1c9785 ] Commit ef91bb196b0d ("kernel.h: Silence sparse warning in lower_32_bits") caused new warnings to show in the fsldma driver, but that commit was not to blame: it only exposed some very incorrect code that tried to take the low 32 bits of an address. That made no sense for multiple reasons, the most notable one being that that code was intentionally limited to only 32-bit ppc builds, so "only low 32 bits of an address" was completely nonsensical. There were no high bits to mask off to begin with. But even more importantly fropm a correctness standpoint, turning the address into an integer then caused the subsequent address arithmetic to be completely wrong too, and the "+1" actually incremented the address by one, rather than by four. Which again was incorrect, since the code was reading two 32-bit values and trying to make a 64-bit end result of it all. Surprisingly, the iowrite64() did not suffer from the same odd and incorrect model. This code has never worked, but it's questionable whether anybody cared: of the two users that actually read the 64-bit value (by way of some C preprocessor hackery and eventually the 'get_cdar()' inline function), one of them explicitly ignored the value, and the other one might just happen to work despite the incorrect value being read. This patch at least makes it not fail the build any more, and makes the logic superficially sane. Whether it makes any difference to the code _working_ or not shall remain a mystery. Compile-tested-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 0a4c56c80f90797e9b9f8426c6aae4c0cf1c9785 ]

Commit ef91bb196b0d ("kernel.h: Silence sparse warning in
lower_32_bits") caused new warnings to show in the fsldma driver, but
that commit was not to blame: it only exposed some very incorrect code
that tried to take the low 32 bits of an address.

That made no sense for multiple reasons, the most notable one being that
that code was intentionally limited to only 32-bit ppc builds, so "only
low 32 bits of an address" was completely nonsensical.  There were no
high bits to mask off to begin with.

But even more importantly fropm a correctness standpoint, turning the
address into an integer then caused the subsequent address arithmetic to
be completely wrong too, and the "+1" actually incremented the address
by one, rather than by four.

Which again was incorrect, since the code was reading two 32-bit values
and trying to make a 64-bit end result of it all.  Surprisingly, the
iowrite64() did not suffer from the same odd and incorrect model.

This code has never worked, but it's questionable whether anybody cared:
of the two users that actually read the 64-bit value (by way of some C
preprocessor hackery and eventually the 'get_cdar()' inline function),
one of them explicitly ignored the value, and the other one might just
happen to work despite the incorrect value being read.

This patch at least makes it not fail the build any more, and makes the
logic superficially sane.  Whether it makes any difference to the code
_working_ or not shall remain a mystery.

Compile-tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
dmaengine: ioat setting ioat timeout as module parameter 2020-07-29T08:18:37+00:00 Leonid Ravich Leonid.Ravich@emc.com 2020-07-01T18:48:12+00:00 460c0dafea9289e0618778051989117175e65630 [ Upstream commit 87730ccbddcb48478b1b88e88b14e73424130764 ] DMA transaction time to completion is a function of PCI bandwidth, transaction size and a queue depth. So hard coded value for timeouts might be wrong for some scenarios. Signed-off-by: Leonid Ravich <Leonid.Ravich@emc.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/20200701184816.29138-1-leonid.ravich@dell.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 87730ccbddcb48478b1b88e88b14e73424130764 ]

DMA transaction time to completion is a function of PCI bandwidth,
transaction size and a queue depth.  So hard coded value for timeouts
might be wrong for some scenarios.

Signed-off-by: Leonid Ravich <Leonid.Ravich@emc.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20200701184816.29138-1-leonid.ravich@dell.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
dmaengine: fsl-edma: fix wrong tcd endianness for big-endian cpu 2020-07-29T08:18:37+00:00 Angelo Dureghello angelo.dureghello@timesys.com 2020-07-01T22:52:05+00:00 493aed3263ca2cf6cabdcca0e63c341b5d225553 [ Upstream commit 8678c71c17721e0f771f135967ef0cce8f69ce9a ] Due to recent fixes in m68k arch-specific I/O accessor macros, this driver is not working anymore for ColdFire. Fix wrong tcd endianness removing additional swaps, since edma_writex() functions should already take care of any eventual swap if needed. Note, i could only test the change in ColdFire mcf54415 and Vybrid vf50 / Colibri where i don't see any issue. So, every feedback and test for all other SoCs involved is really appreciated. Signed-off-by: Angelo Dureghello <angelo.dureghello@timesys.com> Reported-by: kbuild test robot <lkp@intel.com> Link: https://lore.kernel.org/r/20200701225205.1674463-1-angelo.dureghello@timesys.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 8678c71c17721e0f771f135967ef0cce8f69ce9a ]

Due to recent fixes in m68k arch-specific I/O accessor macros, this
driver is not working anymore for ColdFire. Fix wrong tcd endianness
removing additional swaps, since edma_writex() functions should already
take care of any eventual swap if needed.

Note, i could only test the change in ColdFire mcf54415 and Vybrid
vf50 / Colibri where i don't see any issue. So, every feedback and
test for all other SoCs involved is really appreciated.

Signed-off-by: Angelo Dureghello <angelo.dureghello@timesys.com>
Reported-by: kbuild test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20200701225205.1674463-1-angelo.dureghello@timesys.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
dmaengine: tegra210-adma: Fix runtime PM imbalance on error 2020-07-29T08:18:36+00:00 Dinghao Liu dinghao.liu@zju.edu.cn 2020-06-24T06:46:26+00:00 db886ec71fe4ddba33f4b2197320311b9d398781 [ Upstream commit 5b78fac4b1ba731cf4177fdbc1e3a4661521bcd0 ] pm_runtime_get_sync() increments the runtime PM usage counter even when it returns an error code. Thus a pairing decrement is needed on the error handling path to keep the counter balanced. Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Link: https://lore.kernel.org/r/20200624064626.19855-1-dinghao.liu@zju.edu.cn Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 5b78fac4b1ba731cf4177fdbc1e3a4661521bcd0 ]

pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code. Thus a pairing decrement is needed on
the error handling path to keep the counter balanced.

Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20200624064626.19855-1-dinghao.liu@zju.edu.cn
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
dmaengine: fsl-edma-common: correct DSIZE_32BYTE 2020-07-22T07:33:15+00:00 Robin Gong yibin.gong@nxp.com 2020-06-29T16:59:58+00:00 746930d17d14a6f9876039ed3840ff8f0af76854 commit e142087b15960a4e1e5932942e5abae1f49d2318 upstream. Correct EDMA_TCD_ATTR_DSIZE_32BYTE define since it's broken by the below: '0x0005 --> BIT(3) | BIT(0))' Fixes: 4d6d3a90e4ac ("dmaengine: fsl-edma: fix macros") Signed-off-by: Robin Gong <yibin.gong@nxp.com> Tested-by: Angelo Dureghello <angelo@sysam.it> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/1593449998-32091-1-git-send-email-yibin.gong@nxp.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit e142087b15960a4e1e5932942e5abae1f49d2318 upstream.

Correct EDMA_TCD_ATTR_DSIZE_32BYTE define since it's broken by the below:
'0x0005 --> BIT(3) | BIT(0))'

Fixes: 4d6d3a90e4ac ("dmaengine: fsl-edma: fix macros")
Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Tested-by: Angelo Dureghello <angelo@sysam.it>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/1593449998-32091-1-git-send-email-yibin.gong@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dmaengine: mcf-edma: Fix NULL pointer exception in mcf_edma_tx_handler 2020-07-22T07:33:15+00:00 Krzysztof Kozlowski krzk@kernel.org 2020-06-11T13:21:05+00:00 5f3fcbf5b57f0995e710f988bd931dbbda9ee54c commit 8995aa3d164ddd9200e6abcf25c449cf5298c858 upstream. On Toradex Colibri VF50 (Vybrid VF5xx) with fsl-edma driver NULL pointer exception happens occasionally on serial output initiated by login timeout. This was reproduced only if kernel was built with significant debugging options and EDMA driver is used with serial console. Issue looks like a race condition between interrupt handler fsl_edma_tx_handler() (called as a result of fsl_edma_xfer_desc()) and terminating the transfer with fsl_edma_terminate_all(). The fsl_edma_tx_handler() handles interrupt for a transfer with already freed edesc and idle==true. The mcf-edma driver shares design and lot of code with fsl-edma. It looks like being affected by same problem. Fix this pattern the same way as fix for fsl-edma driver. Fixes: e7a3ff92eaf1 ("dmaengine: fsl-edma: add ColdFire mcf5441x edma support") Cc: <stable@vger.kernel.org> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Robin Gong <yibin.gong@nxp.com> Link: https://lore.kernel.org/r/1591881665-25592-1-git-send-email-krzk@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 8995aa3d164ddd9200e6abcf25c449cf5298c858 upstream.

On Toradex Colibri VF50 (Vybrid VF5xx) with fsl-edma driver NULL pointer
exception happens occasionally on serial output initiated by login
timeout.

This was reproduced only if kernel was built with significant debugging
options and EDMA driver is used with serial console.

Issue looks like a race condition between interrupt handler
fsl_edma_tx_handler() (called as a result of fsl_edma_xfer_desc()) and
terminating the transfer with fsl_edma_terminate_all().

The fsl_edma_tx_handler() handles interrupt for a transfer with already
freed edesc and idle==true.

The mcf-edma driver shares design and lot of code with fsl-edma.  It
looks like being affected by same problem.  Fix this pattern the same
way as fix for fsl-edma driver.

Fixes: e7a3ff92eaf1 ("dmaengine: fsl-edma: add ColdFire mcf5441x edma support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Robin Gong <yibin.gong@nxp.com>
Link: https://lore.kernel.org/r/1591881665-25592-1-git-send-email-krzk@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>