linux-stable.git/drivers/dma, branch v5.4.271

dmaengine: fsl-qdma: init irq after reg initialization

2024-03-06T14:36:09+00:00

commit 87a39071e0b639f45e05d296cc0538eef44ec0bd upstream.

Initialize the qDMA irqs after the registers are configured so that
interrupts that may have been pending from a primary kernel don't get
processed by the irq handler before it is ready to and cause panic with
the following trace:

  Call trace:
   fsl_qdma_queue_handler+0xf8/0x3e8
   __handle_irq_event_percpu+0x78/0x2b0
   handle_irq_event_percpu+0x1c/0x68
   handle_irq_event+0x44/0x78
   handle_fasteoi_irq+0xc8/0x178
   generic_handle_irq+0x24/0x38
   __handle_domain_irq+0x90/0x100
   gic_handle_irq+0x5c/0xb8
   el1_irq+0xb8/0x180
   _raw_spin_unlock_irqrestore+0x14/0x40
   __setup_irq+0x4bc/0x798
   request_threaded_irq+0xd8/0x190
   devm_request_threaded_irq+0x74/0xe8
   fsl_qdma_probe+0x4d4/0xca8
   platform_drv_probe+0x50/0xa0
   really_probe+0xe0/0x3f8
   driver_probe_device+0x64/0x130
   device_driver_attach+0x6c/0x78
   __driver_attach+0xbc/0x158
   bus_for_each_dev+0x5c/0x98
   driver_attach+0x20/0x28
   bus_add_driver+0x158/0x220
   driver_register+0x60/0x110
   __platform_driver_register+0x44/0x50
   fsl_qdma_driver_init+0x18/0x20
   do_one_initcall+0x48/0x258
   kernel_init_freeable+0x1a4/0x23c
   kernel_init+0x10/0xf8
   ret_from_fork+0x10/0x18

Cc: stable@vger.kernel.org
Fixes: b092529e0aa0 ("dmaengine: fsl-qdma: Add qDMA controller driver for Layerscape SoCs")
Signed-off-by: Curtis Klein 
Signed-off-by: Yi Zhao 
Signed-off-by: Frank Li 
Link: https://lore.kernel.org/r/20240201220406.440145-1-Frank.Li@nxp.com
Signed-off-by: Vinod Koul 
Signed-off-by: Greg Kroah-Hartman

dmaengine: fsl-qdma: fix SoC may hang on 16 byte unaligned read

2024-03-06T14:36:09+00:00

commit 9d739bccf261dd93ec1babf82f5c5d71dd4caa3e upstream.

There is chip (ls1028a) errata:

The SoC may hang on 16 byte unaligned read transactions by QDMA.

Unaligned read transactions initiated by QDMA may stall in the NOC
(Network On-Chip), causing a deadlock condition. Stalled transactions will
trigger completion timeouts in PCIe controller.

Workaround:
Enable prefetch by setting the source descriptor prefetchable bit
( SD[PF] = 1 ).

Implement this workaround.

Cc: stable@vger.kernel.org
Fixes: b092529e0aa0 ("dmaengine: fsl-qdma: Add qDMA controller driver for Layerscape SoCs")
Signed-off-by: Peng Ma 
Signed-off-by: Frank Li 
Link: https://lore.kernel.org/r/20240201215007.439503-1-Frank.Li@nxp.com
Signed-off-by: Vinod Koul 
Signed-off-by: Greg Kroah-Hartman

dmaengine: fsl-qdma: increase size of 'irq_name'

2024-03-01T12:13:33+00:00

[ Upstream commit 6386f6c995b3ab91c72cfb76e4465553c555a8da ]

We seem to have hit warnings of 'output may be truncated' which is fixed
by increasing the size of 'irq_name'

drivers/dma/fsl-qdma.c: In function ‘fsl_qdma_irq_init’:
drivers/dma/fsl-qdma.c:824:46: error: ‘%d’ directive writing between 1 and 11 bytes into a region of size 10 [-Werror=format-overflow=]
  824 |                 sprintf(irq_name, "qdma-queue%d", i);
      |                                              ^~
drivers/dma/fsl-qdma.c:824:35: note: directive argument in the range [-2147483641, 2147483646]
  824 |                 sprintf(irq_name, "qdma-queue%d", i);
      |                                   ^~~~~~~~~~~~~~
drivers/dma/fsl-qdma.c:824:17: note: ‘sprintf’ output between 12 and 22 bytes into a destination of size 20
  824 |                 sprintf(irq_name, "qdma-queue%d", i);
      |                 ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Signed-off-by: Vinod Koul 
Signed-off-by: Sasha Levin

dmaengine: shdma: increase size of 'dev_id'

2024-03-01T12:13:33+00:00

[ Upstream commit 404290240827c3bb5c4e195174a8854eef2f89ac ]

We seem to have hit warnings of 'output may be truncated' which is fixed
by increasing the size of 'dev_id'

drivers/dma/sh/shdmac.c: In function ‘sh_dmae_probe’:
drivers/dma/sh/shdmac.c:541:34: error: ‘%d’ directive output may be truncated writing between 1 and 10 bytes into a region of size 9 [-Werror=format-truncation=]
  541 |                          "sh-dmae%d.%d", pdev->id, id);
      |                                  ^~
In function ‘sh_dmae_chan_probe’,
    inlined from ‘sh_dmae_probe’ at drivers/dma/sh/shdmac.c:845:9:
drivers/dma/sh/shdmac.c:541:26: note: directive argument in the range [0, 2147483647]
  541 |                          "sh-dmae%d.%d", pdev->id, id);
      |                          ^~~~~~~~~~~~~~
drivers/dma/sh/shdmac.c:541:26: note: directive argument in the range [0, 19]
drivers/dma/sh/shdmac.c:540:17: note: ‘snprintf’ output between 11 and 21 bytes into a destination of size 16
  540 |                 snprintf(sh_chan->dev_id, sizeof(sh_chan->dev_id),
      |                 ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  541 |                          "sh-dmae%d.%d", pdev->id, id);
      |                          ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Signed-off-by: Vinod Koul 
Signed-off-by: Sasha Levin

dmaengine: fsl-qdma: Fix a memory leak related to the queue command DMA

2024-02-23T07:25:06+00:00

[ Upstream commit 3aa58cb51318e329d203857f7a191678e60bb714 ]

This dma_alloc_coherent() is undone neither in the remove function, nor in
the error handling path of fsl_qdma_probe().

Switch to the managed version to fix both issues.

Fixes: b092529e0aa0 ("dmaengine: fsl-qdma: Add qDMA controller driver for Layerscape SoCs")
Signed-off-by: Christophe JAILLET 
Link: https://lore.kernel.org/r/7f66aa14f59d32b13672dde28602b47deb294e1f.1704621515.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul 
Signed-off-by: Sasha Levin

dmaengine: fsl-qdma: Fix a memory leak related to the status queue DMA

2024-02-23T07:25:05+00:00

[ Upstream commit 968bc1d7203d384e72afe34124a1801b7af76514 ]

This dma_alloc_coherent() is undone in the remove function, but not in the
error handling path of fsl_qdma_probe().

Switch to the managed version to fix the issue in the probe and simplify
the remove function.

Fixes: b092529e0aa0 ("dmaengine: fsl-qdma: Add qDMA controller driver for Layerscape SoCs")
Signed-off-by: Christophe JAILLET 
Link: https://lore.kernel.org/r/a0ef5d0f5a47381617ef339df776ddc68ce48173.1704621515.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul 
Signed-off-by: Sasha Levin

dmaengine: stm32-mdma: correct desc prep when channel running

2023-11-28T16:50:19+00:00

commit 03f25d53b145bc2f7ccc82fc04e4482ed734f524 upstream.

In case of the prep descriptor while the channel is already running, the
CCR register value stored into the channel could already have its EN bit
set.  This would lead to a bad transfer since, at start transfer time,
enabling the channel while other registers aren't yet properly set.
To avoid this, ensure to mask the CCR_EN bit when storing the ccr value
into the mdma channel structure.

Fixes: a4ffb13c8946 ("dmaengine: Add STM32 MDMA driver")
Signed-off-by: Alain Volmat 
Signed-off-by: Amelie Delaunay 
Cc: stable@vger.kernel.org
Tested-by: Alain Volmat 
Link: https://lore.kernel.org/r/20231009082450.452877-1-amelie.delaunay@foss.st.com
Signed-off-by: Vinod Koul 
Signed-off-by: Greg Kroah-Hartman

dmaengine: pxa_dma: Remove an erroneous BUG_ON() in pxad_free_desc()

2023-11-20T09:30:14+00:00

[ Upstream commit 83c761f568733277ce1f7eb9dc9e890649c29a8c ]

If pxad_alloc_desc() fails on the first dma_pool_alloc() call, then
sw_desc->nb_desc is zero.
In such a case pxad_free_desc() is called and it will BUG_ON().

Remove this erroneous BUG_ON().

It is also useless, because if "sw_desc->nb_desc == 0", then, on the first
iteration of the for loop, i is -1 and the loop will not be executed.
(both i and sw_desc->nb_desc are 'int')

Fixes: a57e16cf0333 ("dmaengine: pxa: add pxa dmaengine driver")
Signed-off-by: Christophe JAILLET 
Link: https://lore.kernel.org/r/c8fc5563c9593c914fde41f0f7d1489a21b45a9a.1696676782.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul 
Signed-off-by: Sasha Levin

dmaengine: ti: edma: handle irq_of_parse_and_map() errors

2023-11-20T09:30:13+00:00

[ Upstream commit 14f6d317913f634920a640e9047aa2e66f5bdcb7 ]

Zero is not a valid IRQ for in-kernel code and the irq_of_parse_and_map()
function returns zero on error.  So this check for valid IRQs should only
accept values > 0.

Fixes: 2b6b3b742019 ("ARM/dmaengine: edma: Merge the two drivers under drivers/dma/")
Signed-off-by: Dan Carpenter 
Acked-by: Peter Ujfalusi 
Link: https://lore.kernel.org/r/f15cb6a7-8449-4f79-98b6-34072f04edbc@moroto.mountain
Signed-off-by: Vinod Koul 
Signed-off-by: Sasha Levin

dmaengine: ste_dma40: Fix PM disable depth imbalance in d40_probe

2023-11-08T10:23:40+00:00

[ Upstream commit 0618c077a8c20e8c81e367988f70f7e32bb5a717 ]

The pm_runtime_enable will increase power disable depth. Thus
a pairing decrement is needed on the error handling path to
keep it balanced according to context.
We fix it by calling pm_runtime_disable when error returns.

Signed-off-by: Zhang Shurong 
Reviewed-by: Linus Walleij 
Link: https://lore.kernel.org/r/tencent_DD2D371DB5925B4B602B1E1D0A5FA88F1208@qq.com
Signed-off-by: Vinod Koul 
Signed-off-by: Sasha Levin