linux-stable.git/drivers/dma, branch v5.4.223

dmaengine: ioat: stop mod_timer from resurrecting deleted timer in __cleanup()

2022-10-26T11:22:43+00:00

[ Upstream commit 898ec89dbb55b8294695ad71694a0684e62b2a73 ]

User reports observing timer event report channel halted but no error
observed in CHANERR register. The driver finished self-test and released
channel resources. Debug shows that __cleanup() can call
mod_timer() after the timer has been deleted and thus resurrect the
timer. While harmless, it causes suprious error message to be emitted.
Use mod_timer_pending() call to prevent deleted timer from being
resurrected.

Fixes: 3372de5813e4 ("dmaengine: ioatdma: removal of dma_v3.c and relevant ioat3 references")
Signed-off-by: Dave Jiang 
Link: https://lore.kernel.org/r/166360672197.3851724.17040290563764838369.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul 
Signed-off-by: Sasha Levin

dmaengine: xilinx_dma: Report error in case of dma_set_mask_and_coherent API failure

2022-10-15T05:54:37+00:00

[ Upstream commit 8f2b6bc79c32f0fa60df000ae387a790ec80eae9 ]

The driver does not handle the failure case while calling
dma_set_mask_and_coherent API.

In case of failure, capture the return value of API and then report an
error.

Addresses-coverity: Unchecked return value (CHECKED_RETURN)

Signed-off-by: Swati Agarwal 
Reviewed-by: Radhey Shyam Pandey 
Link: https://lore.kernel.org/r/20220817061125.4720-4-swati.agarwal@xilinx.com
Signed-off-by: Vinod Koul 
Signed-off-by: Sasha Levin

dmaengine: xilinx_dma: cleanup for fetching xlnx,num-fstores property

2022-10-15T05:54:37+00:00

[ Upstream commit 462bce790e6a7e68620a4ce260cc38f7ed0255d5 ]

Free the allocated resources for missing xlnx,num-fstores property.

Signed-off-by: Swati Agarwal 
Link: https://lore.kernel.org/r/20220817061125.4720-3-swati.agarwal@xilinx.com
Signed-off-by: Vinod Koul 
Signed-off-by: Sasha Levin

dmaengine: sprd: Cleanup in .remove() after pm_runtime_get_sync() failed

2022-08-25T09:18:35+00:00

[ Upstream commit 1e42f82cbec7b2cc4873751e7791e6611901c5fc ]

It's not allowed to quit remove early without cleaning up completely.
Otherwise this results in resource leaks that probably yield graver
problems later. Here for example some tasklets might survive the lifetime
of the sprd-dma device and access sdev which is freed after .remove()
returns.

As none of the device freeing requires an active device, just ignore the
return value of pm_runtime_get_sync().

Signed-off-by: Uwe Kleine-König 
Reviewed-by: Baolin Wang 
Link: https://lore.kernel.org/r/20220721204054.323602-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Vinod Koul 
Signed-off-by: Sasha Levin

dmaengine: ti: Add missing put_device in ti_dra7_xbar_route_allocate

2022-07-12T14:30:50+00:00

commit 615a4bfc426e11dba05c2cf343f9ac752fb381d2 upstream.

of_find_device_by_node() takes reference, we should use put_device()
to release it when not need anymore.

Fixes: a074ae38f859 ("dmaengine: Add driver for TI DMA crossbar on DRA7x")
Signed-off-by: Miaoqian Lin 
Acked-by: Peter Ujfalusi 
Link: https://lore.kernel.org/r/20220605042723.17668-1-linmq006@gmail.com
Signed-off-by: Vinod Koul 
Signed-off-by: Greg Kroah-Hartman

dmaengine: ti: Fix refcount leak in ti_dra7_xbar_route_allocate

2022-07-12T14:30:50+00:00

commit c132fe78ad7b4ce8b5d49a501a15c29d08eeb23a upstream.

of_parse_phandle() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not needed anymore.

Add missing of_node_put() in to fix this.

Fixes: ec9bfa1e1a79 ("dmaengine: ti-dma-crossbar: dra7: Use bitops instead of idr")
Signed-off-by: Miaoqian Lin 
Link: https://lore.kernel.org/r/20220605042723.17668-2-linmq006@gmail.com
Signed-off-by: Vinod Koul 
Signed-off-by: Greg Kroah-Hartman

dmaengine: at_xdma: handle errors of at_xdmac_alloc_desc() correctly

2022-07-12T14:30:50+00:00

commit 3770d92bd5237d686e49da7b2fb86f53ee6ed259 upstream.

It seems that it is valid to have less than the requested number of
descriptors. But what is not valid and leads to subsequent errors is to
have zero descriptors. In that case, abort the probing.

Fixes: e1f7c9eee707 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver")
Signed-off-by: Michael Walle 
Link: https://lore.kernel.org/r/20220526135111.1470926-1-michael@walle.cc
Signed-off-by: Vinod Koul 
Signed-off-by: Greg Kroah-Hartman

dmaengine: pl330: Fix lockdep warning about non-static key

2022-07-12T14:30:50+00:00

commit b64b3b2f1d81f83519582e1feee87d77f51f5f17 upstream.

The DEFINE_SPINLOCK() macro shouldn't be used for dynamically allocated
spinlocks. The lockdep warns about this and disables locking validator.
Fix the warning by making lock static.

 INFO: trying to register non-static key.
 The code is fine but needs lockdep annotation, or maybe
 you didn't initialize this object before use?
 turning off the locking correctness validator.
 Hardware name: Radxa ROCK Pi 4C (DT)
 Call trace:
  dump_backtrace.part.0+0xcc/0xe0
  show_stack+0x18/0x6c
  dump_stack_lvl+0x8c/0xb8
  dump_stack+0x18/0x34
  register_lock_class+0x4a8/0x4cc
  __lock_acquire+0x78/0x20cc
  lock_acquire.part.0+0xe0/0x230
  lock_acquire+0x68/0x84
  _raw_spin_lock_irqsave+0x84/0xc4
  add_desc+0x44/0xc0
  pl330_get_desc+0x15c/0x1d0
  pl330_prep_dma_cyclic+0x100/0x270
  snd_dmaengine_pcm_trigger+0xec/0x1c0
  dmaengine_pcm_trigger+0x18/0x24
  ...

Fixes: e588710311ee ("dmaengine: pl330: fix descriptor allocation fail")
Signed-off-by: Dmitry Osipenko 
Link: https://lore.kernel.org/r/20220520181432.149904-1-dmitry.osipenko@collabora.com
Signed-off-by: Vinod Koul 
Signed-off-by: Greg Kroah-Hartman

dmaengine: imx-sdma: Allow imx8m for imx7 FW revs

2022-07-12T14:30:49+00:00

commit a7cd3cf0b2e5aaacfe5e02c472bd28e98e640be7 upstream.

The revision of the imx-sdma IP that is in the i.MX8M series is the
same is that as that in the i.MX7 series but the imx7d MODULE_FIRMWARE
directive is wrapped in a condiditional which means it's not defined
when built for aarch64 SOC_IMX8M platforms and hence you get the
following errors when the driver loads on imx8m devices:

imx-sdma 302c0000.dma-controller: Direct firmware load for imx/sdma/sdma-imx7d.bin failed with error -2
imx-sdma 302c0000.dma-controller: external firmware not found, using ROM firmware

Add the SOC_IMX8M into the check so the firmware can load on i.MX8.

Fixes: 1474d48bd639 ("arm64: dts: imx8mq: Add SDMA nodes")
Fixes: 941acd566b18 ("dmaengine: imx-sdma: Only check ratio on parts that support 1:1")
Signed-off-by: Peter Robinson 
Cc: stable@vger.kernel.org   # v5.2+
Reviewed-by: Fabio Estevam 
Link: https://lore.kernel.org/r/20220606161034.3544803-1-pbrobinson@gmail.com
Signed-off-by: Vinod Koul 
Signed-off-by: Greg Kroah-Hartman

dmaengine: zynqmp_dma: In struct zynqmp_dma_chan fix desc_size data type

2022-06-14T16:11:56+00:00

[ Upstream commit f9a9f43a62a04ec3183fb0da9226c7706eed0115 ]

In zynqmp_dma_alloc/free_chan_resources functions there is a
potential overflow in the below expressions.

dma_alloc_coherent(chan->dev, (2 * chan->desc_size *
		   ZYNQMP_DMA_NUM_DESCS),
		   &chan->desc_pool_p, GFP_KERNEL);

dma_free_coherent(chan->dev,(2 * ZYNQMP_DMA_DESC_SIZE(chan) *
                 ZYNQMP_DMA_NUM_DESCS),
                chan->desc_pool_v, chan->desc_pool_p);

The arguments desc_size and ZYNQMP_DMA_NUM_DESCS were 32 bit. Though
this overflow condition is not observed but it is a potential problem
in the case of 32-bit multiplication. Hence fix it by changing the
desc_size data type to size_t.

In addition to coverity fix it also reuse ZYNQMP_DMA_DESC_SIZE macro in
dma_alloc_coherent API argument.

Addresses-Coverity: Event overflow_before_widen.
Signed-off-by: Radhey Shyam Pandey 
Link: https://lore.kernel.org/r/1652166762-18317-2-git-send-email-radhey.shyam.pandey@xilinx.com
Signed-off-by: Vinod Koul 
Signed-off-by: Sasha Levin