linux-stable.git/drivers/dma, branch v5.4.217

dmaengine: sprd: Cleanup in .remove() after pm_runtime_get_sync() failed

2022-08-25T09:18:35+00:00

[ Upstream commit 1e42f82cbec7b2cc4873751e7791e6611901c5fc ]

It's not allowed to quit remove early without cleaning up completely.
Otherwise this results in resource leaks that probably yield graver
problems later. Here for example some tasklets might survive the lifetime
of the sprd-dma device and access sdev which is freed after .remove()
returns.

As none of the device freeing requires an active device, just ignore the
return value of pm_runtime_get_sync().

Signed-off-by: Uwe Kleine-König 
Reviewed-by: Baolin Wang 
Link: https://lore.kernel.org/r/20220721204054.323602-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Vinod Koul 
Signed-off-by: Sasha Levin

dmaengine: ti: Add missing put_device in ti_dra7_xbar_route_allocate

2022-07-12T14:30:50+00:00

commit 615a4bfc426e11dba05c2cf343f9ac752fb381d2 upstream.

of_find_device_by_node() takes reference, we should use put_device()
to release it when not need anymore.

Fixes: a074ae38f859 ("dmaengine: Add driver for TI DMA crossbar on DRA7x")
Signed-off-by: Miaoqian Lin 
Acked-by: Peter Ujfalusi 
Link: https://lore.kernel.org/r/20220605042723.17668-1-linmq006@gmail.com
Signed-off-by: Vinod Koul 
Signed-off-by: Greg Kroah-Hartman

dmaengine: ti: Fix refcount leak in ti_dra7_xbar_route_allocate

2022-07-12T14:30:50+00:00

commit c132fe78ad7b4ce8b5d49a501a15c29d08eeb23a upstream.

of_parse_phandle() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not needed anymore.

Add missing of_node_put() in to fix this.

Fixes: ec9bfa1e1a79 ("dmaengine: ti-dma-crossbar: dra7: Use bitops instead of idr")
Signed-off-by: Miaoqian Lin 
Link: https://lore.kernel.org/r/20220605042723.17668-2-linmq006@gmail.com
Signed-off-by: Vinod Koul 
Signed-off-by: Greg Kroah-Hartman

dmaengine: at_xdma: handle errors of at_xdmac_alloc_desc() correctly

2022-07-12T14:30:50+00:00

commit 3770d92bd5237d686e49da7b2fb86f53ee6ed259 upstream.

It seems that it is valid to have less than the requested number of
descriptors. But what is not valid and leads to subsequent errors is to
have zero descriptors. In that case, abort the probing.

Fixes: e1f7c9eee707 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver")
Signed-off-by: Michael Walle 
Link: https://lore.kernel.org/r/20220526135111.1470926-1-michael@walle.cc
Signed-off-by: Vinod Koul 
Signed-off-by: Greg Kroah-Hartman

dmaengine: pl330: Fix lockdep warning about non-static key

2022-07-12T14:30:50+00:00

commit b64b3b2f1d81f83519582e1feee87d77f51f5f17 upstream.

The DEFINE_SPINLOCK() macro shouldn't be used for dynamically allocated
spinlocks. The lockdep warns about this and disables locking validator.
Fix the warning by making lock static.

 INFO: trying to register non-static key.
 The code is fine but needs lockdep annotation, or maybe
 you didn't initialize this object before use?
 turning off the locking correctness validator.
 Hardware name: Radxa ROCK Pi 4C (DT)
 Call trace:
  dump_backtrace.part.0+0xcc/0xe0
  show_stack+0x18/0x6c
  dump_stack_lvl+0x8c/0xb8
  dump_stack+0x18/0x34
  register_lock_class+0x4a8/0x4cc
  __lock_acquire+0x78/0x20cc
  lock_acquire.part.0+0xe0/0x230
  lock_acquire+0x68/0x84
  _raw_spin_lock_irqsave+0x84/0xc4
  add_desc+0x44/0xc0
  pl330_get_desc+0x15c/0x1d0
  pl330_prep_dma_cyclic+0x100/0x270
  snd_dmaengine_pcm_trigger+0xec/0x1c0
  dmaengine_pcm_trigger+0x18/0x24
  ...

Fixes: e588710311ee ("dmaengine: pl330: fix descriptor allocation fail")
Signed-off-by: Dmitry Osipenko 
Link: https://lore.kernel.org/r/20220520181432.149904-1-dmitry.osipenko@collabora.com
Signed-off-by: Vinod Koul 
Signed-off-by: Greg Kroah-Hartman

dmaengine: imx-sdma: Allow imx8m for imx7 FW revs

2022-07-12T14:30:49+00:00

commit a7cd3cf0b2e5aaacfe5e02c472bd28e98e640be7 upstream.

The revision of the imx-sdma IP that is in the i.MX8M series is the
same is that as that in the i.MX7 series but the imx7d MODULE_FIRMWARE
directive is wrapped in a condiditional which means it's not defined
when built for aarch64 SOC_IMX8M platforms and hence you get the
following errors when the driver loads on imx8m devices:

imx-sdma 302c0000.dma-controller: Direct firmware load for imx/sdma/sdma-imx7d.bin failed with error -2
imx-sdma 302c0000.dma-controller: external firmware not found, using ROM firmware

Add the SOC_IMX8M into the check so the firmware can load on i.MX8.

Fixes: 1474d48bd639 ("arm64: dts: imx8mq: Add SDMA nodes")
Fixes: 941acd566b18 ("dmaengine: imx-sdma: Only check ratio on parts that support 1:1")
Signed-off-by: Peter Robinson 
Cc: stable@vger.kernel.org   # v5.2+
Reviewed-by: Fabio Estevam 
Link: https://lore.kernel.org/r/20220606161034.3544803-1-pbrobinson@gmail.com
Signed-off-by: Vinod Koul 
Signed-off-by: Greg Kroah-Hartman

dmaengine: zynqmp_dma: In struct zynqmp_dma_chan fix desc_size data type

2022-06-14T16:11:56+00:00

[ Upstream commit f9a9f43a62a04ec3183fb0da9226c7706eed0115 ]

In zynqmp_dma_alloc/free_chan_resources functions there is a
potential overflow in the below expressions.

dma_alloc_coherent(chan->dev, (2 * chan->desc_size *
		   ZYNQMP_DMA_NUM_DESCS),
		   &chan->desc_pool_p, GFP_KERNEL);

dma_free_coherent(chan->dev,(2 * ZYNQMP_DMA_DESC_SIZE(chan) *
                 ZYNQMP_DMA_NUM_DESCS),
                chan->desc_pool_v, chan->desc_pool_p);

The arguments desc_size and ZYNQMP_DMA_NUM_DESCS were 32 bit. Though
this overflow condition is not observed but it is a potential problem
in the case of 32-bit multiplication. Hence fix it by changing the
desc_size data type to size_t.

In addition to coverity fix it also reuse ZYNQMP_DMA_DESC_SIZE macro in
dma_alloc_coherent API argument.

Addresses-Coverity: Event overflow_before_widen.
Signed-off-by: Radhey Shyam Pandey 
Link: https://lore.kernel.org/r/1652166762-18317-2-git-send-email-radhey.shyam.pandey@xilinx.com
Signed-off-by: Vinod Koul 
Signed-off-by: Sasha Levin

dmaengine: stm32-mdma: remove GISR1 register

2022-06-14T16:11:43+00:00

[ Upstream commit 9d6a2d92e450926c483e45eaf426080a19219f4e ]

GISR1 was described in a not up-to-date documentation when the stm32-mdma
driver has been developed. This register has not been added in reference
manual of STM32 SoC with MDMA, which have only 32 MDMA channels.
So remove it from stm32-mdma driver.

Fixes: a4ffb13c8946 ("dmaengine: Add STM32 MDMA driver")
Signed-off-by: Amelie Delaunay 
Link: https://lore.kernel.org/r/20220504155322.121431-2-amelie.delaunay@foss.st.com
Signed-off-by: Vinod Koul 
Signed-off-by: Sasha Levin

dma: at_xdmac: fix a missing check on list iterator

2022-04-27T11:50:48+00:00

commit 206680c4e46b62fd8909385e0874a36952595b85 upstream.

The bug is here:
	__func__, desc, &desc->tx_dma_desc.phys, ret, cookie, residue);

The list iterator 'desc' will point to a bogus position containing
HEAD if the list is empty or no element is found. To avoid dev_dbg()
prints a invalid address, use a new variable 'iter' as the list
iterator, while use the origin variable 'desc' as a dedicated
pointer to point to the found element.

Cc: stable@vger.kernel.org
Fixes: 82e2424635f4c ("dmaengine: xdmac: fix print warning on dma_addr_t variable")
Signed-off-by: Xiaomeng Tong 
Link: https://lore.kernel.org/r/20220327061154.4867-1-xiam0nd.tong@gmail.com
Signed-off-by: Vinod Koul 
Signed-off-by: Greg Kroah-Hartman

dmaengine: mediatek:Fix PM usage reference leak of mtk_uart_apdma_alloc_chan_resources

2022-04-27T11:50:46+00:00

[ Upstream commit 545b2baac89b859180e51215468c05d85ea8465a ]

pm_runtime_get_sync will increment pm usage counter even it failed.
Forgetting to putting operation will result in reference leak here.
We fix it:
1) Replacing it with pm_runtime_resume_and_get to keep usage counter
   balanced.
2) Add putting operation before returning error.

Fixes:9135408c3ace4 ("dmaengine: mediatek: Add MediaTek UART APDMA support")
Signed-off-by: Zhang Qilong 
Link: https://lore.kernel.org/r/20220319022142.142709-1-zhangqilong3@huawei.com
Signed-off-by: Vinod Koul 
Signed-off-by: Sasha Levin