linux-stable.git/drivers/dma, branch v4.9.296

dmaengine: dmaengine_desc_callback_valid(): Check for `callback_result`

2021-11-26T10:48:38+00:00

[ Upstream commit e7e1e880b114ca640a2f280b0d5d38aed98f98c6 ]

Before the `callback_result` callback was introduced drivers coded their
invocation to the callback in a similar way to:

	if (cb->callback) {
		spin_unlock(&dma->lock);
		cb->callback(cb->callback_param);
		spin_lock(&dma->lock);
	}

With the introduction of `callback_result` two helpers where introduced to
transparently handle both types of callbacks. And drivers where updated to
look like this:

	if (dmaengine_desc_callback_valid(cb)) {
		spin_unlock(&dma->lock);
		dmaengine_desc_callback_invoke(cb, ...);
		spin_lock(&dma->lock);
	}

dmaengine_desc_callback_invoke() correctly handles both `callback_result`
and `callback`. But we forgot to update the dmaengine_desc_callback_valid()
function to check for `callback_result`. As a result DMA descriptors that
use the `callback_result` rather than `callback` don't have their callback
invoked by drivers that follow the pattern above.

Fix this by checking for both `callback` and `callback_result` in
dmaengine_desc_callback_valid().

Fixes: f067025bc676 ("dmaengine: add support to provide error result from a DMA transation")
Signed-off-by: Lars-Peter Clausen 
Acked-by: Dave Jiang 
Link: https://lore.kernel.org/r/20211023134101.28042-1-lars@metafoo.de
Signed-off-by: Vinod Koul 
Signed-off-by: Sasha Levin

dmaengine: at_xdmac: fix AT_XDMAC_CC_PERID() macro

2021-11-26T10:48:38+00:00

[ Upstream commit 320c88a3104dc955f928a1eecebd551ff89530c0 ]

AT_XDMAC_CC_PERID() should be used to setup bits 24..30 of XDMAC_CC
register. Using it without parenthesis around 0x7f & (i) will lead to
setting all the time zero for bits 24..30 of XDMAC_CC as the << operator
has higher precedence over bitwise &. Thus, add paranthesis around
0x7f & (i).

Fixes: 15a03850ab8f ("dmaengine: at_xdmac: fix macro typo")
Signed-off-by: Claudiu Beznea 
Reviewed-by: Tudor Ambarus 
Link: https://lore.kernel.org/r/20211007111230.2331837-3-claudiu.beznea@microchip.com
Signed-off-by: Vinod Koul 
Signed-off-by: Sasha Levin

dmaengine: xilinx_dma: Set DMA mask for coherent APIs

2021-09-26T11:36:18+00:00

[ Upstream commit aac6c0f90799d66b8989be1e056408f33fd99fe6 ]

The xilinx dma driver uses the consistent allocations, so for correct
operation also set the DMA mask for coherent APIs. It fixes the below
kernel crash with dmatest client when DMA IP is configured with 64-bit
address width and linux is booted from high (>4GB) memory.

Call trace:
[  489.531257]  dma_alloc_from_pool+0x8c/0x1c0
[  489.535431]  dma_direct_alloc+0x284/0x330
[  489.539432]  dma_alloc_attrs+0x80/0xf0
[  489.543174]  dma_pool_alloc+0x160/0x2c0
[  489.547003]  xilinx_cdma_prep_memcpy+0xa4/0x180
[  489.551524]  dmatest_func+0x3cc/0x114c
[  489.555266]  kthread+0x124/0x130
[  489.558486]  ret_from_fork+0x10/0x3c
[  489.562051] ---[ end trace 248625b2d596a90a ]---

Signed-off-by: Radhey Shyam Pandey 
Reviewed-by: Harini Katakam 
Link: https://lore.kernel.org/r/1629363528-30347-1-git-send-email-radhey.shyam.pandey@xilinx.com
Signed-off-by: Vinod Koul 
Signed-off-by: Sasha Levin

dmaengine: ioat: depends on !UML

2021-09-26T11:36:18+00:00

[ Upstream commit bbac7a92a46f0876e588722ebe552ddfe6fd790f ]

Now that UML has PCI support, this driver must depend also on
!UML since it pokes at X86_64 architecture internals that don't
exist on ARCH=um.

Reported-by: Geert Uytterhoeven 
Signed-off-by: Johannes Berg 
Acked-by: Dave Jiang 
Link: https://lore.kernel.org/r/20210809112409.a3a0974874d2.I2ffe3d11ed37f735da2f39884a74c953b258b995@changeid
Signed-off-by: Vinod Koul 
Signed-off-by: Sasha Levin

dmaengine: acpi: Avoid comparison GSI with Linux vIRQ

2021-09-26T11:36:18+00:00

commit 67db87dc8284070adb15b3c02c1c31d5cf51c5d6 upstream.

Currently the CRST parsing relies on the fact that on most of x86 devices
the IRQ mapping is 1:1 with Linux vIRQ. However, it may be not true for
some. Fix this by converting GSI to Linux vIRQ before checking it.

Fixes: ee8209fd026b ("dma: acpi-dma: parse CSRT to extract additional resources")
Signed-off-by: Andy Shevchenko 
Link: https://lore.kernel.org/r/20210730202715.24375-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Vinod Koul 
Signed-off-by: Greg Kroah-Hartman

dmaengine: of-dma: router_xlate to return -EPROBE_DEFER if controller is not yet available

2021-08-26T12:37:26+00:00

[ Upstream commit eda97cb095f2958bbad55684a6ca3e7d7af0176a ]

If the router_xlate can not find the controller in the available DMA
devices then it should return with -EPORBE_DEFER in a same way as the
of_dma_request_slave_channel() does.

The issue can be reproduced if the event router is registered before the
DMA controller itself and a driver would request for a channel before the
controller is registered.
In of_dma_request_slave_channel():
1. of_dma_find_controller() would find the dma_router
2. ofdma->of_dma_xlate() would fail and returned NULL
3. -ENODEV is returned as error code

with this patch we would return in this case the correct -EPROBE_DEFER and
the client can try to request the channel later.

Signed-off-by: Peter Ujfalusi 
Link: https://lore.kernel.org/r/20210717190021.21897-1-peter.ujfalusi@gmail.com
Signed-off-by: Vinod Koul 
Signed-off-by: Sasha Levin

dmaengine: usb-dmac: Fix PM reference leak in usb_dmac_probe()

2021-08-26T12:37:25+00:00

[ Upstream commit 1da569fa7ec8cb0591c74aa3050d4ea1397778b4 ]

pm_runtime_get_sync will increment pm usage counter even it failed.
Forgetting to putting operation will result in reference leak here.
Fix it by moving the error_pm label above the pm_runtime_put() in
the error path.

Reported-by: Hulk Robot 
Signed-off-by: Yu Kuai 
Link: https://lore.kernel.org/r/20210706124521.1371901-1-yukuai3@huawei.com
Signed-off-by: Vinod Koul 
Signed-off-by: Sasha Levin

dmaengine: pl330: fix wrong usage of spinlock flags in dma_cyclc

2021-06-30T12:49:17+00:00

commit 4ad5dd2d7876d79507a20f026507d1a93b8fff10 upstream.

flags varible which is the input parameter of pl330_prep_dma_cyclic()
should not be used by spinlock_irq[save/restore] function.

Signed-off-by: Jongho Park 
Signed-off-by: Bumyong Lee 
Signed-off-by: Chanho Park 
Link: https://lore.kernel.org/r/20210507063647.111209-1-chanho61.park@samsung.com
Fixes: f6f2421c0a1c ("dmaengine: pl330: Merge dma_pl330_dmac and pl330_dmac structs")
Cc: stable@vger.kernel.org
Signed-off-by: Vinod Koul 
Signed-off-by: Greg Kroah-Hartman

dmaengine: stedma40: add missing iounmap() on error in d40_probe()

2021-06-30T12:49:12+00:00

[ Upstream commit fffdaba402cea79b8d219355487d342ec23f91c6 ]

Add the missing iounmap() before return from d40_probe()
in the error handling case.

Fixes: 8d318a50b3d7 ("DMAENGINE: Support for ST-Ericssons DMA40 block v3")
Reported-by: Hulk Robot 
Signed-off-by: Yang Yingliang 
Reviewed-by: Linus Walleij 
Link: https://lore.kernel.org/r/20210518141108.1324127-1-yangyingliang@huawei.com
Signed-off-by: Vinod Koul 
Signed-off-by: Sasha Levin

dmaengine: QCOM_HIDMA_MGMT depends on HAS_IOMEM

2021-06-30T12:49:12+00:00

[ Upstream commit 0cfbb589d67f16fa55b26ae02b69c31b52e344b1 ]

When CONFIG_HAS_IOMEM is not set/enabled, certain iomap() family
functions [including ioremap(), devm_ioremap(), etc.] are not
available.
Drivers that use these functions should depend on HAS_IOMEM so that
they do not cause build errors.

Rectifies these build errors:
s390-linux-ld: drivers/dma/qcom/hidma_mgmt.o: in function `hidma_mgmt_probe':
hidma_mgmt.c:(.text+0x780): undefined reference to `devm_ioremap_resource'
s390-linux-ld: drivers/dma/qcom/hidma_mgmt.o: in function `hidma_mgmt_init':
hidma_mgmt.c:(.init.text+0x126): undefined reference to `of_address_to_resource'
s390-linux-ld: hidma_mgmt.c:(.init.text+0x16e): undefined reference to `of_address_to_resource'

Fixes: 67a2003e0607 ("dmaengine: add Qualcomm Technologies HIDMA channel driver")
Signed-off-by: Randy Dunlap 
Reported-by: kernel test robot 
Cc: Sinan Kaya 
Cc: Vinod Koul 
Cc: dmaengine@vger.kernel.org
Link: https://lore.kernel.org/r/20210522021313.16405-3-rdunlap@infradead.org
Signed-off-by: Vinod Koul 
Signed-off-by: Sasha Levin