linux-stable.git/drivers/dma, branch v4.4.181

dmaengine: at_xdmac: remove BUG_ON macro in tasklet

2019-06-11T10:23:57+00:00

[ Upstream commit e2c114c06da2d9ffad5b16690abf008d6696f689 ]

Even if this case shouldn't happen when controller is properly programmed,
it's still better to avoid dumping a kernel Oops for this.
As the sequence may happen only for debugging purposes, log the error and
just finish the tasklet call.

Signed-off-by: Nicolas Ferre 
Acked-by: Ludovic Desroches 
Signed-off-by: Vinod Koul 
Signed-off-by: Sasha Levin

dmaengine: pl330: _stop: clear interrupt status

2019-06-11T10:23:55+00:00

[ Upstream commit 2da254cc7908105a60a6bb219d18e8dced03dcb9 ]

This patch kill instructs the DMAC to immediately terminate
execution of a thread. and then clear the interrupt status,
at last, stop generating interrupts for DMA_SEV. to guarantee
the next dma start is clean. otherwise, one interrupt maybe leave
to next start and make some mistake.

we can reporduce the problem as follows:

DMASEV: modify the event-interrupt resource, and if the INTEN sets
function as interrupt, the DMAC will set irq HIGH to
generate interrupt. write INTCLR to clear interrupt.

	DMA EXECUTING INSTRUCTS		DMA TERMINATE
		|				|
		|				|
	       ...			      _stop
		|				|
		|			spin_lock_irqsave
	     DMASEV				|
		|				|
		|			    mask INTEN
		|				|
		|			     DMAKILL
		|				|
		|			spin_unlock_irqrestore

in above case, a interrupt was left, and if we unmask INTEN, the DMAC
will set irq HIGH to generate interrupt.

to fix this, do as follows:

	DMA EXECUTING INSTRUCTS		DMA TERMINATE
		|				|
		|				|
	       ...			      _stop
		|				|
		|			spin_lock_irqsave
	     DMASEV				|
		|				|
		|			     DMAKILL
		|				|
		|			   clear INTCLR
		|			    mask INTEN
		|				|
		|			spin_unlock_irqrestore

Signed-off-by: Sugar Zhang 
Signed-off-by: Vinod Koul 
Signed-off-by: Sasha Levin

dmaengine: tegra: avoid overflow of byte tracking

2019-04-27T07:33:53+00:00

[ Upstream commit e486df39305864604b7e25f2a95d51039517ac57 ]

The dma_desc->bytes_transferred counter tracks the number of bytes
moved by the DMA channel. This is then used to calculate the information
passed back in the in the tegra_dma_tx_status callback, which is usually
fine.

When the DMA channel is configured as continous, then the bytes_transferred
counter will increase over time and eventually overflow to become negative
so the residue count will become invalid and the ALSA sound-dma code will
report invalid hardware pointer values to the application. This results in
some users becoming confused about the playout position and putting audio
data in the wrong place.

To fix this issue, always ensure the bytes_transferred field is modulo the
size of the request. We only do this for the case of the cyclic transfer
done ISR as anyone attempting to move 2GiB of DMA data in one transfer
is unlikely.

Note, we don't fix the issue that we should /never/ transfer a negative
number of bytes so we could make those fields unsigned.

Reviewed-by: Dmitry Osipenko 
Signed-off-by: Ben Dooks 
Acked-by: Jon Hunter 
Signed-off-by: Vinod Koul 
Signed-off-by: Sasha Levin

dmaengine: imx-dma: fix warning comparison of distinct pointer types

2019-04-27T07:33:52+00:00

[ Upstream commit 9227ab5643cb8350449502dd9e3168a873ab0e3b ]

The warning got introduced by commit 930507c18304 ("arm64: add basic
Kconfig symbols for i.MX8"). Since it got enabled for arm64. The warning
haven't been seen before since size_t was 'unsigned int' when built on
arm32.

../drivers/dma/imx-dma.c: In function ‘imxdma_sg_next’:
../include/linux/kernel.h:846:29: warning: comparison of distinct pointer types lacks a cast
   (!!(sizeof((typeof(x) *)1 == (typeof(y) *)1)))
                             ^~
../include/linux/kernel.h:860:4: note: in expansion of macro ‘__typecheck’
   (__typecheck(x, y) && __no_side_effects(x, y))
    ^~~~~~~~~~~
../include/linux/kernel.h:870:24: note: in expansion of macro ‘__safe_cmp’
  __builtin_choose_expr(__safe_cmp(x, y), \
                        ^~~~~~~~~~
../include/linux/kernel.h:879:19: note: in expansion of macro ‘__careful_cmp’
 #define min(x, y) __careful_cmp(x, y, <)
                   ^~~~~~~~~~~~~
../drivers/dma/imx-dma.c:288:8: note: in expansion of macro ‘min’
  now = min(d->len, sg_dma_len(sg));
        ^~~

Rework so that we use min_t and pass in the size_t that returns the
minimum of two values, using the specified type.

Signed-off-by: Anders Roxell 
Acked-by: Olof Johansson 
Reviewed-by: Fabio Estevam 
Signed-off-by: Vinod Koul 
Signed-off-by: Sasha Levin

dmaengine: usb-dmac: Make DMAC system sleep callbacks explicit

2019-03-23T07:44:36+00:00

commit d9140a0da4a230a03426d175145989667758aa6a upstream.

This commit fixes the issue that USB-DMAC hangs silently after system
resumes on R-Car Gen3 hence renesas_usbhs will not work correctly
when using USB-DMAC for bulk transfer e.g. ethernet or serial
gadgets.

The issue can be reproduced by these steps:
 1. modprobe g_serial
 2. Suspend and resume system.
 3. connect a usb cable to host side
 4. Transfer data from Host to Target
 5. cat /dev/ttyGS0 (Target side)
 6. echo "test" > /dev/ttyACM0 (Host side)

The 'cat' will not result anything. However, system still can work
normally.

Currently, USB-DMAC driver does not have system sleep callbacks hence
this driver relies on the PM core to force runtime suspend/resume to
suspend and reinitialize USB-DMAC during system resume. After
the commit 17218e0092f8 ("PM / genpd: Stop/start devices without
pm_runtime_force_suspend/resume()"), PM core will not force
runtime suspend/resume anymore so this issue happens.

To solve this, make system suspend resume explicit by using
pm_runtime_force_{suspend,resume}() as the system sleep callbacks.
SET_NOIRQ_SYSTEM_SLEEP_PM_OPS() is used to make sure USB-DMAC
suspended after and initialized before renesas_usbhs."

Signed-off-by: Phuong Nguyen 
Signed-off-by: Hiroyuki Yokoyama 
Cc:  # v4.16+
[shimoda: revise the commit log and add Cc tag]
Signed-off-by: Yoshihiro Shimoda 
Signed-off-by: Vinod Koul 
Signed-off-by: Greg Kroah-Hartman

dmaengine: dmatest: Abort test in case of mapping error

2019-03-23T07:44:27+00:00

[ Upstream commit 6454368a804c4955ccd116236037536f81e5b1f1 ]

In case of mapping error the DMA addresses are invalid and continuing
will screw system memory or potentially something else.

[  222.480310] dmatest: dma0chan7-copy0: summary 1 tests, 3 failures 6 iops 349 KB/s (0)
...
[  240.912725] check: Corrupted low memory at 00000000c7c75ac9 (2940 phys) = 5656000000000000
[  240.921998] check: Corrupted low memory at 000000005715a1cd (2948 phys) = 279f2aca5595ab2b
[  240.931280] check: Corrupted low memory at 000000002f4024c0 (2950 phys) = 5e5624f349e793cf
...

Abort any test if mapping failed.

Fixes: 4076e755dbec ("dmatest: convert to dmaengine_unmap_data")
Cc: Dan Williams 
Signed-off-by: Andy Shevchenko 
Signed-off-by: Vinod Koul 
Signed-off-by: Sasha Levin

dmaengine: at_xdmac: Fix wrongfull report of a channel as in use

2019-03-23T07:44:27+00:00

[ Upstream commit dc3f595b6617ebc0307e0ce151e8f2f2b2489b95 ]

atchan->status variable is used to store two different information:
 - pass channel interrupts status from interrupt handler to tasklet;
 - channel information like whether it is cyclic or paused;

This causes a bug when device_terminate_all() is called,
(AT_XDMAC_CHAN_IS_CYCLIC cleared on atchan->status) and then a late End
of Block interrupt arrives (AT_XDMAC_CIS_BIS), which sets bit 0 of
atchan->status. Bit 0 is also used for AT_XDMAC_CHAN_IS_CYCLIC, so when
a new descriptor for a cyclic transfer is created, the driver reports
the channel as in use:

if (test_and_set_bit(AT_XDMAC_CHAN_IS_CYCLIC, &atchan->status)) {
	dev_err(chan2dev(chan), "channel currently used\n");
	return NULL;
}

This patch fixes the bug by adding a different struct member to keep
the interrupts status separated from the channel status bits.

Fixes: e1f7c9eee707 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver")
Signed-off-by: Codrin Ciubotariu 
Acked-by: Ludovic Desroches 
Signed-off-by: Vinod Koul 
Signed-off-by: Sasha Levin

dmaengine: imx-dma: fix wrong callback invoke

2019-02-20T09:13:16+00:00

commit 341198eda723c8c1cddbb006a89ad9e362502ea2 upstream.

Once the "ld_queue" list is not empty, next descriptor will migrate
into "ld_active" list. The "desc" variable will be overwritten
during that transition. And later the dmaengine_desc_get_callback_invoke()
will use it as an argument. As result we invoke wrong callback.

That behaviour was in place since:
commit fcaaba6c7136 ("dmaengine: imx-dma: fix callback path in tasklet").
But after commit 4cd13c21b207 ("softirq: Let ksoftirqd do its job")
things got worse, since possible delay between tasklet_schedule()
from DMA irq handler and actual tasklet function execution got bigger.
And that gave more time for new DMA request to be submitted and
to be put into "ld_queue" list.

It has been noticed that DMA issue is causing problems for "mxc-mmc"
driver. While stressing the system with heavy network traffic and
writing/reading to/from sd card simultaneously the timeout may happen:

10013000.sdhci: mxcmci_watchdog: read time out (status = 0x30004900)

That often lead to file system corruption.

Signed-off-by: Leonid Iziumtsev 
Signed-off-by: Vinod Koul 
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman

dmaengine: at_hdmac: fix module unloading

2018-12-13T08:21:27+00:00

commit 77e75fda94d2ebb86aa9d35fb1860f6395bf95de upstream.

of_dma_controller_free() was not called on module onloading.
This lead to a soft lockup:
watchdog: BUG: soft lockup - CPU#0 stuck for 23s!
Modules linked in: at_hdmac [last unloaded: at_hdmac]
when of_dma_request_slave_channel() tried to call ofdma->of_dma_xlate().

Cc: stable@vger.kernel.org
Fixes: bbe89c8e3d59 ("at_hdmac: move to generic DMA binding")
Acked-by: Ludovic Desroches 
Signed-off-by: Richard Genoud 
Signed-off-by: Vinod Koul 
Signed-off-by: Greg Kroah-Hartman

dmaengine: at_hdmac: fix memory leak in at_dma_xlate()

2018-12-13T08:21:27+00:00

commit 98f5f932254b88ce828bc8e4d1642d14e5854caa upstream.

The leak was found when opening/closing a serial port a great number of
time, increasing kmalloc-32 in slabinfo.

Each time the port was opened, dma_request_slave_channel() was called.
Then, in at_dma_xlate(), atslave was allocated with devm_kzalloc() and
never freed. (Well, it was free at module unload, but that's not what we
want).
So, here, kzalloc is more suited for the job since it has to be freed in
atc_free_chan_resources().

Cc: stable@vger.kernel.org
Fixes: bbe89c8e3d59 ("at_hdmac: move to generic DMA binding")
Reported-by: Mario Forner 
Suggested-by: Alexandre Belloni 
Acked-by: Alexandre Belloni 
Acked-by: Ludovic Desroches 
Signed-off-by: Richard Genoud 
Signed-off-by: Vinod Koul 
Signed-off-by: Greg Kroah-Hartman