linux-stable.git/drivers/dma/sh, branch linux-4.9.y

dmaengine: Revert "dmaengine: shdma: Fix runtime PM imbalance on error"

2022-04-20T07:06:44+00:00

commit d143f939a95696d38ff800ada14402fa50ebbd6c upstream.

This reverts commit 455896c53d5b ("dmaengine: shdma: Fix runtime PM
imbalance on error") as the patch wrongly reduced the count on error and
did not bail out. So drop the count by reverting the patch .

Signed-off-by: Vinod Koul 
Signed-off-by: Greg Kroah-Hartman

dmaengine: shdma: Fix runtime PM imbalance on error

2022-03-08T18:00:57+00:00

[ Upstream commit 455896c53d5b803733ddd84e1bf8a430644439b6 ]

pm_runtime_get_() increments the runtime PM usage counter even
when it returns an error code, thus a matching decrement is needed on
the error handling path to keep the counter balanced.

Signed-off-by: Yongzhi Liu 
Link: https://lore.kernel.org/r/1642311296-87020-1-git-send-email-lyz_cs@pku.edu.cn
Signed-off-by: Vinod Koul 
Signed-off-by: Sasha Levin

dmaengine: usb-dmac: Fix PM reference leak in usb_dmac_probe()

2021-08-26T12:37:25+00:00

[ Upstream commit 1da569fa7ec8cb0591c74aa3050d4ea1397778b4 ]

pm_runtime_get_sync will increment pm usage counter even it failed.
Forgetting to putting operation will result in reference leak here.
Fix it by moving the error_pm label above the pm_runtime_put() in
the error path.

Reported-by: Hulk Robot 
Signed-off-by: Yu Kuai 
Link: https://lore.kernel.org/r/20210706124521.1371901-1-yukuai3@huawei.com
Signed-off-by: Vinod Koul 
Signed-off-by: Sasha Levin

dmaengine: rcar-dmac: Reject zero-length slave DMA requests

2019-08-06T16:29:35+00:00

[ Upstream commit 78efb76ab4dfb8f74f290ae743f34162cd627f19 ]

While the .device_prep_slave_sg() callback rejects empty scatterlists,
it still accepts single-entry scatterlists with a zero-length segment.
These may happen if a driver calls dmaengine_prep_slave_single() with a
zero len parameter.  The corresponding DMA request will never complete,
leading to messages like:

    rcar-dmac e7300000.dma-controller: Channel Address Error happen

and DMA timeouts.

Although requesting a zero-length DMA request is a driver bug, rejecting
it early eases debugging.  Note that the .device_prep_dma_memcpy()
callback already rejects requests to copy zero bytes.

Reported-by: Eugeniu Rosca 
Analyzed-by: Yoshihiro Shimoda 
Signed-off-by: Geert Uytterhoeven 
Signed-off-by: Vinod Koul 
Signed-off-by: Sasha Levin

dmaengine: sh: rcar-dmac: With cyclic DMA residue 0 is valid

2019-05-02T07:32:02+00:00

commit 907bd68a2edc491849e2fdcfe52c4596627bca94 upstream.

Having a cyclic DMA, a residue 0 is not an indication of a completed
DMA. In case of cyclic DMA make sure that dma_set_residue() is called
and with this a residue of 0 is forwarded correctly to the caller.

Fixes: 3544d2878817 ("dmaengine: rcar-dmac: use result of updated get_residue in tx_status")
Signed-off-by: Dirk Behme 
Signed-off-by: Achim Dahlhoff 
Signed-off-by: Hiroyuki Yokoyama 
Signed-off-by: Yao Lihua 
Reviewed-by: Yoshihiro Shimoda 
Reviewed-by: Laurent Pinchart 
Cc:  # v4.8+
Signed-off-by: Vinod Koul 
Signed-off-by: Greg Kroah-Hartman

dmaengine: rcar-dmac: Check the done lists in rcar_dmac_chan_get_residue()

2018-05-30T05:50:48+00:00

[ Upstream commit 3e081628d510b2ddbe493371d9c574d9275da17e ]

This patch fixes an issue that a race condition happens between a client
driver and the rcar-dmac driver:

- The rcar_dmac_isr_transfer_end() is called.
 - The done list appears, and desc.running is the next active list.
- rcar_dmac_chan_get_residue() is called by a client driver before
  rcar_dmac_isr_channel_thread() is called.
 - The rcar_dmac_chan_get_residue() will not find any descriptors.
 - And, the following WARNING happens:
	WARN(1, "No descriptor for cookie!");

The sh-sci driver with HSCIF (921,600bps) on R-Car H3 can cause this
situation.
So, this patch checks the done lists in rcar_dmac_chan_get_residue()
and returns zero if the done lists has the argument cookie.

Tested-by: Nguyen Viet Dung 
Signed-off-by: Yoshihiro Shimoda 
Signed-off-by: Vinod Koul 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

dmaengine: rcar-dmac: fix max_chunk_size for R-Car Gen3

2018-05-30T05:50:32+00:00

[ Upstream commit d716d9b702bb759dd6fb50804f10a174bd156d71 ]

According to R-Car Gen3 Rev.0.80 manual, the DMATCR can be set to
16,777,215 as maximum. So, this patch fixes the max_chunk_size for
safety on all of SoCs. Otherwise, a system may hang if the DMATCR
is set to 0 on R-Car Gen3.

Signed-off-by: Yoshihiro Shimoda 
Reviewed-by: Simon Horman 
Signed-off-by: Vinod Koul 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

dmaengine: usb-dmac: Fix DMAOR AE bit definition

2017-06-14T13:05:56+00:00

commit 9a445bbb1607d9f14556a532453dd86d1b7e381e upstream.

This patch fixes the register definition of AE (Address Error flag) bit.

Fixes: 0c1c8ff32fa2 ("dmaengine: usb-dmac: Add Renesas USB DMA Controller (USB-DMAC) driver")
Signed-off-by: Hiroyuki Yokoyama 
[Shimoda: add Fixes and Cc tags in the commit log]
Signed-off-by: Yoshihiro Shimoda 
Reviewed-by: Geert Uytterhoeven 
Signed-off-by: Vinod Koul 
Signed-off-by: Greg Kroah-Hartman

dmaengine: rcar-dmac: unmap slave resource when channel is freed

2017-01-26T07:24:45+00:00

commit 3139dc8ded6f27552a248d23fe9f086e3027fa12 upstream.

The slave mapping should be removed together with other channel
resources when the channel is freed. If it's not unmapped it will hang
around forever after the channel is freed.

Fixes: 9f878603dbdb7db3 ("dmaengine: rcar-dmac: add iommu support for slave transfers")
Reported-by: Laurent Pinchart 
Signed-off-by: Niklas Söderlund 
Reviewed-by: Laurent Pinchart 
Signed-off-by: Vinod Koul 
Signed-off-by: Greg Kroah-Hartman

Merge tag 'dmaengine-4.9-rc1' of git://git.infradead.org/users/vkoul/slave-dma

2016-10-07T00:13:54+00:00

Pull dmaengine updates from Vinod Koul:
 "This is bit large pile of code which bring in some nice additions:

   - Error reporting: we have added a new mechanism for users of
     dmaenegine to register a callback_result which tells them the
     result of the dma transaction. Right now only one user (ntb) is
     using it.

   - As we discussed on KS mailing list and pointed out NO_IRQ has no
     place in kernel, this also remove NO_IRQ from dmaengine subsystem
     (both arm and ppc users)

   - Support for IOMMU slave transfers and its implementation for arm.

   - To get better build coverage, enable COMPILE_TEST for bunch of
     driver, and fix the warning and sparse complaints on these.

   - Apart from above, usual updates spread across drivers"

* tag 'dmaengine-4.9-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (169 commits)
  async_pq_val: fix DMA memory leak
  dmaengine: virt-dma: move function declarations
  dmaengine: omap-dma: Enable burst and data pack for SG
  DT: dmaengine: rcar-dmac: document R8A7743/5 support
  dmaengine: fsldma: Unmap region obtained by of_iomap
  dmaengine: jz4780: fix resource leaks on error exit return
  dma-debug: fix ia64 build, use PHYS_PFN
  dmaengine: coh901318: fix integer overflow when shifting more than 32 places
  dmaengine: edma: avoid uninitialized variable use
  dma-mapping: fix m32r build warning
  dma-mapping: fix ia64 build, use PHYS_PFN
  dmaengine: ti-dma-crossbar: enable COMPILE_TEST
  dmaengine: omap-dma: enable COMPILE_TEST
  dmaengine: edma: enable COMPILE_TEST
  dmaengine: ti-dma-crossbar: Fix of_device_id data parameter usage
  dmaengine: ti-dma-crossbar: Correct type for of_find_property() third parameter
  dmaengine/ARM: omap-dma: Fix the DMAengine compile test on non OMAP configs
  dmaengine: edma: Rename set_bits and remove unused clear_bits helper
  dmaengine: edma: Use correct type for of_find_property() third parameter
  dmaengine: edma: Fix of_device_id data parameter usage (legacy vs TPCC)
  ...