Pull dmaengine updates from Vinod Koul:
"Core:
- New API to combine configuration and preparation and users
New hardware support:
- Mediatek MT8189 SoC uart dma support
Updates:
- Designware dma driver flatten desc structures and simplify code,
interrupt-path groundwork changes, first part of PCI EP DMA support
- Updates to zynqmp_dma with runtime PM and device removal
improvments
- Xilinx dma optimizations for AXIDMA and MCDMA channel management"
* tag 'dmaengine-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (73 commits)
dmaengine: dw-edma: Mark emulated IRQ as level-triggered
dmaengine: idxd: assign all engines to group 0 in IAA defaults
dmaengine: qcom_hidma: remove conditional return with no effect
dmaengine: qcom-bam-dma: fix autosuspend cleanup during removal
dmaengine: fsl-edma: tracing: no ptr dereference during log output
dmaengine: dw-edma: Program endpoint function numbers
dmaengine: dw-edma-pcie: Add chip flags to match data
dmaengine: dw-edma-pcie: Handle optional data blocks
dmaengine: dw-edma-pcie: Factor out descriptor block address lookup
dmaengine: dw-edma-pcie: Add register offset match flag
dmaengine: dw-edma-pcie: Add platform ops to match data
dmaengine: dw-edma-pcie: Rename vsec_data to dma_data
dmaengine: dw-edma-pcie: Add capability match data
dmaengine: dw-edma-pcie: Track non-LL mode in DMA data
dmaengine: dw-edma: Add partial channel ownership mode
dmaengine: dw-edma: Initialize IRQ data before requesting IRQs
dmaengine: dw-edma: Add core quiesce operations
dmaengine: dw-edma: Add per-channel interrupt routing control
dmaengine: dw-edma: Factor out HDMA interrupt setup helper
dmaengine: dw-edma: Defer channel IRQ handling to workqueue
...
Both branches of the check return the same value, so the check has no effect. Remove it and return the value directly. This is the result of running the Coccinelle script from scripts/coccinelle/misc/cond_return_no_effect.cocci. Signed-off-by: Sang-Heon Jeon <ekffu200098@gmail.com> Link: https://patch.msgid.link/20260723184538.3888637-20-ekffu200098@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
bam_dma_probe() calls pm_runtime_use_autosuspend(), but
bam_dma_remove() does not call the matching
pm_runtime_dont_use_autosuspend() when removing the device.
If the autosuspend delay is set to a negative value while autosuspend
is enabled, the runtime PM core increments usage_count to prevent
runtime suspend. Without calling pm_runtime_dont_use_autosuspend()
during teardown, this reference is not dropped and usage_count remains
unbalanced.
Add the missing pm_runtime_dont_use_autosuspend() call before forcing
the device into runtime suspend during removal.
This issue was found by manual code inspection.
Fixes: 7d2545599f5b ("dmaengine: qcom-bam-dma: Add pm_runtime support")
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260808110642.2770355-1-lgs201920130244@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Replace the #include of <linux/mod_devicetable.h> by the more specific <linux/device-id/*.h> where applicable. For most cases the include can be dropped completely, only a few drivers need one or two headers added. Acked-by: Danilo Krummrich <dakr@kernel.org> Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://patch.msgid.link/1a3f2007c5c5dcf555c09a4035ce3ae8ef1b6c49.1782808461.git.u.kleine-koenig@baylibre.com Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Various names for Qualcomm as a company are used in user-visible config options: QCOM, Qualcomm and Qualcomm Technologies. Switch to unified "Qualcomm" so it will be easier for users to identify the options when for example running menuconfig. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Link: https://patch.msgid.link/20260423173602.92503-2-krzysztof.kozlowski@oss.qualcomm.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
Replace sprintf() and strlen() patterns in sysfs show callbacks with sysfs_emit(). sysfs_emit() is the preferred helper for formatting sysfs output and simplifies the implementation. Signed-off-by: Hungyu Lin <dennylin0707@gmail.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://patch.msgid.link/20260607163119.78717-1-dennylin0707@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
The GPI DMA controller is only responsible for QUP peripherals, and
cannot work as a general-purpose DMA accelerator.
Set DMA_PRIVATE capability for it.
This fixes error messages about GPI being shown when an async-tx
consumer is loaded.
Fixes: 5d0c3533a19f ("dmaengine: qcom: Add GPI dma driver")
Signed-off-by: Icenowy Zheng <zhengxingda@iscas.ac.cn>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260602070344.3707256-1-zhengxingda@iscas.ac.cn
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add register offset table entry for bam v2.0.0 version found on kaanapali. Signed-off-by: Kuldeep Singh <kuldeep.singh@oss.qualcomm.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Link: https://patch.msgid.link/20260514-knp_qce-v2-2-890e3372eef8@oss.qualcomm.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
This is the result of running the Coccinelle script from scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to avoid scalar types (which need careful case-by-case checking), and instead replace kmalloc-family calls that allocate struct or union object instances: Single allocations: kmalloc(sizeof(TYPE), ...) are replaced with: kmalloc_obj(TYPE, ...) Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...) are replaced with: kmalloc_objs(TYPE, COUNT, ...) Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...) are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...) (where TYPE may also be *VAR) The resulting allocations no longer return "void *", instead returning "TYPE *". Signed-off-by: Kees Cook <kees@kernel.org>
Pull dmaengine updates from Vinod Koul: "Core: - Add Frank Li as susbstem reviewer to help with reviews New Support: - Mediatek support for Dimensity 6300 and 9200 controller - Qualcomm Kaanapali and Glymur GPI DMA engine - Synopsis DW AXI Agilex5 - Renesas RZ/V2N SoC - Atmel microchip lan9691-dma - Tegra ADMA tegra264 Updates: - sg_nents_for_dma() helper use in subsystem - pm_runtime_mark_last_busy() redundant call update for subsystem - Residue support for xilinx AXIDMA driver - Intel Max SGL Size Support and capabilities for DSA3.0 - AXI dma larger than 32bits address support" * tag 'dmaengine-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (64 commits) dmaengine: add Frank Li as reviewer dt-bindings: dma: qcom,gpi: Update max interrupts lines to 16 dmaengine: fsl-edma: don't explicitly disable clocks in .remove() dmaengine: xilinx: xdma: use sg_nents_for_dma() helper dmaengine: sh: use sg_nents_for_dma() helper dmaengine: sa11x0: use sg_nents_for_dma() helper dmaengine: qcom: bam_dma: use sg_nents_for_dma() helper dmaengine: qcom: adm: use sg_nents_for_dma() helper dmaengine: pxa-dma: use sg_nents_for_dma() helper dmaengine: lgm: use sg_nents_for_dma() helper dmaengine: k3dma: use sg_nents_for_dma() helper dmaengine: dw-axi-dmac: use sg_nents_for_dma() helper dmaengine: bcm2835-dma: use sg_nents_for_dma() helper dmaengine: axi-dmac: use sg_nents_for_dma() helper dmaengine: altera-msgdma: use sg_nents_for_dma() helper scatterlist: introduce sg_nents_for_dma() helper dmaengine: idxd: Add Max SGL Size Support for DSA3.0 dmaengine: idxd: Expose DSA3.0 capabilities through sysfs dmaengine: sh: rz-dmac: Make channel irq local dmaengine: pl08x: Fix comment stating the difference between PL080 and PL081 ...