Originally freeing descriptors was split into a locked and an unlocked
part. The locked part in vchan_get_all_descriptors() collected all
descriptors on a separate list_head. This was done to allow iterating
over that new list in vchan_dma_desc_free_list() without a lock held.

This became broken in 13bb26ae8850 ("dmaengine: virt-dma: don't always
free descriptor upon completion"). With this commit
vchan_dma_desc_free_list() no longer exclusively operates on the
separate list, but starts to put descriptors which can be reused back on
&vc->desc_allocated. This list operation should have been locked, but
wasn't.
In the mean time drivers started to call vchan_dma_desc_free_list() with
their lock held so that we now have the situation that
vchan_dma_desc_free_list() is called locked from some drivers and
unlocked from others.
To clean this up we have to do two things:

1. Add missing locking in vchan_dma_desc_free_list()
2. Make sure drivers call vchan_dma_desc_free_list() unlocked

This needs to be done atomically, so in this patch the locking is added
and all drivers are fixed.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Green Wan <green.wan@sifive.com>
Tested-by: Green Wan <green.wan@sifive.com>
Link: https://lore.kernel.org/r/20191216105328.15198-3-s.hauer@pengutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>

When devm_request_irq fails, currently, the function
dma_async_device_unregister gets called. This doesn't free
the resources allocated by of_dma_controller_register.
Therefore, we have called of_dma_controller_free for this purpose.

Signed-off-by: Satendra Singh Thakur <sst2005@gmail.com>
Link: https://lore.kernel.org/r/20191109113523.6067-1-sst2005@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

Simplify this function implementation by using a known wrapper function.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Link: https://lore.kernel.org/r/366e776c-8760-eeb7-c248-7380c9f4fd34@web.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>

Simplify this function implementation a bit by using
a known wrapper function.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Link: https://lore.kernel.org/r/c7e3bbae-44fa-9019-18ee-c6cdfd7c2a14@web.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>

We don't need dev_err() messages when platform_get_irq() fails now that
platform_get_irq() prints an error message itself when something goes
wrong. Let's remove these prints with a simple semantic patch.

// <smpl>
@@
expression ret;
struct platform_device *E;
@@

ret =
(
platform_get_irq(E, ...)
|
platform_get_irq_byname(E, ...)
);

if ( \( ret < 0 \| ret <= 0 \) )
{
(
-if (ret != -EPROBE_DEFER)
-{ ...
-dev_err(...);
-... }
|
...
-dev_err(...);
)
...
}
// </smpl>

While we're here, remove braces on if statements that only have one
statement (manually).

Cc: Vinod Koul <vkoul@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: dmaengine@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20190730181557.90391-11-swboyd@chromium.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

Pull dmaengine updates from Vinod Koul:

 - Add support in dmaengine core to do device node checks for DT devices
   and update bunch of drivers to use that and remove open coding from
   drivers

 - New driver/driver support for new hardware, namely:
     - MediaTek UART APDMA
     - Freescale i.mx7ulp edma2
     - Synopsys eDMA IP core version 0
     - Allwinner H6 DMA

 - Updates to axi-dma and support for interleaved cyclic transfers

 - Greg's debugfs return value check removals on drivers

 - Updates to stm32-dma, hsu, dw, pl330, tegra drivers

* tag 'dmaengine-5.3-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (68 commits)
  dmaengine: Revert "dmaengine: fsl-edma: add i.mx7ulp edma2 version support"
  dmaengine: at_xdmac: check for non-empty xfers_list before invoking callback
  Documentation: dmaengine: clean up description of dmatest usage
  dmaengine: tegra210-adma: remove PM_CLK dependency
  dmaengine: fsl-edma: add i.mx7ulp edma2 version support
  dt-bindings: dma: fsl-edma: add new i.mx7ulp-edma
  dmaengine: fsl-edma-common: version check for v2 instead
  dmaengine: fsl-edma-common: move dmamux register to another single function
  dmaengine: fsl-edma: add drvdata for fsl-edma
  dmaengine: Revert "dmaengine: fsl-edma: support little endian for edma driver"
  dmaengine: rcar-dmac: Reject zero-length slave DMA requests
  dmaengine: dw: Enable iDMA 32-bit on Intel Elkhart Lake
  dmaengine: dw-edma: fix semicolon.cocci warnings
  dmaengine: sh: usb-dmac: Use [] to denote a flexible array member
  dmaengine: dmatest: timeout value of -1 should specify infinite wait
  dmaengine: dw: Distinguish ->remove() between DW and iDMA 32-bit
  dmaengine: fsl-edma: support little endian for edma driver
  dmaengine: hsu: Revert "set HSU_CH_MTSR to memory width"
  dmagengine: pl330: add code to get reset property
  dt-bindings: pl330: document the optional resets property
  ...

Pull dmaengine fixes from Vinod Koul:

 - jz4780 transfer fix for acking descriptors early

 - fsl-qdma: clean registers on error

 - dw-axi-dmac: null pointer dereference fix

 - mediatek-cqdma: fix sleeping in atomic context

 - tegra210-adma: fix bunch os issues like crashing in driver probe,
   channel FIFO configuration etc.

 - sprd: Fixes for possible crash on descriptor status, block length
   overflow. For 2-stage transfer fix incorrect start, configuration and
   interrupt handling.

* tag 'dmaengine-fix-5.2-rc4' of git://git.infradead.org/users/vkoul/slave-dma:
  dmaengine: sprd: Add interrupt support for 2-stage transfer
  dmaengine: sprd: Fix the right place to configure 2-stage transfer
  dmaengine: sprd: Fix block length overflow
  dmaengine: sprd: Fix the incorrect start for 2-stage destination channels
  dmaengine: sprd: Add validation of current descriptor in irq handler
  dmaengine: sprd: Fix the possible crash when getting descriptor status
  dmaengine: tegra210-adma: Fix spelling
  dmaengine: tegra210-adma: Fix channel FIFO configuration
  dmaengine: tegra210-adma: Fix crash during probe
  dmaengine: mediatek-cqdma: sleeping in atomic context
  dmaengine: dw-axi-dmac: fix null dereference when pointer first is null
  dmaengine: fsl-qdma: Add improvement
  dmaengine: jz4780: Fix transfers being ACKed too soon

Add 8250 UART APDMA to support MediaTek UART. If MediaTek UART is
enabled by SERIAL_8250_MT6577, and we can enable this driver to offload
the UART device moving bytes.

Signed-off-by: Long Cheng <long.cheng@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>

The mtk_cqdma_poll_engine_done() function takes a true/false parameter
where true means it's called from atomic context.  There are a couple
places where it was set to false but it's actually in atomic context
so it should be true.

All the callers for mtk_cqdma_hard_reset() are holding a spin_lock and
in mtk_cqdma_free_chan_resources() we take a spin_lock before calling
the mtk_cqdma_poll_engine_done() function.

Fixes: b1f01e48df5a ("dmaengine: mediatek: Add MediaTek Command-Queue DMA controller for MT6765 SoC")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>

Add SPDX license identifiers to all Make/Kconfig files which:

 - Have no license information of any form

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>