linux-stable.git/drivers/crypto, branch v6.5.4

crypto: stm32 - fix MDMAT condition

2023-09-13T07:53:56+00:00

commit a4adfbc2544933ac12e7fbd50708290265546dbc upstream.

If IP has MDMAT support, set or reset the bit MDMAT in Control Register.

Fixes: b56403a25af7 ("crypto: stm32/hash - Support Ux500 hash")
Cc: stable@vger.kernel.org
Reviewed-by: Linus Walleij 
Signed-off-by: Thomas Bourgoin 
Signed-off-by: Herbert Xu 
Signed-off-by: Greg Kroah-Hartman

crypto: stm32 - fix loop iterating through scatterlist for DMA

2023-09-13T07:53:56+00:00

commit d9c83f71eeceed2cb54bb78be84f2d4055fd9a1f upstream.

We were reading the length of the scatterlist sg after copying value of
tsg inside.
So we are using the size of the previous scatterlist and for the first
one we are using an unitialised value.
Fix this by copying tsg in sg[0] before reading the size.

Fixes : 8a1012d3f2ab ("crypto: stm32 - Support for STM32 HASH module")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Bourgoin 
Signed-off-by: Herbert Xu 
Signed-off-by: Greg Kroah-Hartman

crypto: qat - fix crypto capability detection for 4xxx

2023-09-13T07:53:11+00:00

[ Upstream commit fab9516f02b418e37d3cde6c21c316085262aece ]

When extending the capability detection logic for 4xxx devices the
SMx algorithms were accidentally missed.
Enable these SMx capabilities by default for QAT GEN4 devices.

Check for device variants where the SMx algorithms are explicitly
disabled by the GEN4 hardware. This is indicated in fusectl1
register.
Mask out SM3 and SM4 based on a bit specific to those algorithms.
Mask out SM2 if the PKE slice is not present.

Fixes: 4b44d28c715d ("crypto: qat - extend crypto capability detection for 4xxx")
Signed-off-by: Adam Guerin 
Reviewed-by: Giovanni Cabiddu 
Reviewed-by: Fiona Trahe 
Signed-off-by: Herbert Xu 
Signed-off-by: Sasha Levin

crypto: caam - fix unchecked return value error

2023-09-13T07:53:07+00:00

[ Upstream commit e30685204711a6be40dec2622606950ccd37dafe ]

error:
Unchecked return value (CHECKED_RETURN)
check_return: Calling sg_miter_next without checking return value

fix:
added check if(!sg_miter_next)

Fixes: 8a2a0dd35f2e ("crypto: caam - strip input zeros from RSA input buffer")
Signed-off-by: Gaurav Jain 
Signed-off-by: Meenakshi Aggarwal 
Reviewed-by: Gaurav Jain 
Signed-off-by: Herbert Xu 
Signed-off-by: Sasha Levin

crypto: stm32 - Properly handle pm_runtime_get failing

2023-09-13T07:53:05+00:00

[ Upstream commit aec48805163338f8413118796c1dd035661b9140 ]

If pm_runtime_get() (disguised as pm_runtime_resume_and_get()) fails, this
means the clk wasn't prepared and enabled. Returning early in this case
however is wrong as then the following resource frees are skipped and this
is never catched up. So do all the cleanups but clk_disable_unprepare().

Also don't emit a warning, as stm32_hash_runtime_resume() already emitted
one.

Note that the return value of stm32_hash_remove() is mostly ignored by
the device core. The only effect of returning zero instead of an error
value is to suppress another warning in platform_remove(). So return 0
even if pm_runtime_resume_and_get() failed.

Fixes: 8b4d566de6a5 ("crypto: stm32/hash - Add power management support")
Signed-off-by: Uwe Kleine-König 
Signed-off-by: Herbert Xu 
Signed-off-by: Sasha Levin

crypto: qat - change value of default idle filter

2023-09-13T07:53:02+00:00

[ Upstream commit 0f942bdfe9d463be3073301519492f8d53c6b2d5 ]

The power management configuration of 4xxx devices is too aggressive
and in some conditions the device might be prematurely put to a low
power state.
Increase the idle filter value to prevent that.
In future, this will be set by firmware.

Fixes: e5745f34113b ("crypto: qat - enable power management for QAT GEN4")
Signed-off-by: Giovanni Cabiddu 
Reviewed-by: Damian Muszynski 
Signed-off-by: Herbert Xu 
Signed-off-by: Sasha Levin

Revert "crypto: caam - adjust RNG timing to support more devices"

2023-08-18T08:47:02+00:00

This reverts commit ef492d080302913e85122a2d92efa2ca174930f8.

This patch breaks the RNG on i.MX8MM.

Reported-by: Bastian Krause 
Link: https://lore.kernel.org/all/e1f3f073-9d5e-1bae-f4f8-08dc48adad62@pengutronix.de/
Signed-off-by: Herbert Xu

Merge tag 's390-6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

2023-07-06T20:18:30+00:00

Pull more s390 updates from Alexander Gordeev:

 - Fix virtual vs physical address confusion in vmem_add_range() and
   vmem_remove_range() functions

 - Include  instead of  and 
   throughout s390 code

 - Make all PSW related defines also available for assembler files.
   Remove PSW_DEFAULT_KEY define from uapi for that

 - When adding an undefined symbol the build still succeeds, but
   userspace crashes trying to execute VDSO, because the symbol is not
   resolved. Add undefined symbols check to prevent that

 - Use kvmalloc_array() instead of kzalloc() for allocaton of 256k
   memory when executing s390 crypto adapter IOCTL

 - Add -fPIE flag to prevent decompressor misaligned symbol build error
   with clang

 - Use .balign instead of .align everywhere. This is a no-op for s390,
   but with this there no mix in using .align and .balign anymore

 - Filter out -mno-pic-data-is-text-relative flag when compiling kernel
   to prevent VDSO build error

 - Rework entering of DAT-on mode on CPU restart to use PSW_KERNEL_BITS
   mask directly

 - Do not retry administrative requests to some s390 crypto cards, since
   the firmware assumes replay attacks

 - Remove most of the debug code, which is build in when kernel config
   option CONFIG_ZCRYPT_DEBUG is enabled

 - Remove CONFIG_ZCRYPT_MULTIDEVNODES kernel config option and switch
   off the multiple devices support for the s390 zcrypt device driver

 - With the conversion to generic entry machine checks are accounted to
   the current context instead of irq time. As result, the STCKF
   instruction at the beginning of the machine check handler and the
   lowcore member are no longer required, therefore remove it

 - Fix various typos found with codespell

 - Minor cleanups to CPU-measurement Counter and Sampling Facilities
   code

 - Revert patch that removes VMEM_MAX_PHYS macro, since it causes a
   regression

* tag 's390-6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (25 commits)
  Revert "s390/mm: get rid of VMEM_MAX_PHYS macro"
  s390/cpum_sf: remove check on CPU being online
  s390/cpum_sf: handle casts consistently
  s390/cpum_sf: remove unnecessary debug statement
  s390/cpum_sf: remove parameter in call to pr_err
  s390/cpum_sf: simplify function setup_pmu_cpu
  s390/cpum_cf: remove unneeded debug statements
  s390/entry: remove mcck clock
  s390: fix various typos
  s390/zcrypt: remove ZCRYPT_MULTIDEVNODES kernel config option
  s390/zcrypt: do not retry administrative requests
  s390/zcrypt: cleanup some debug code
  s390/entry: rework entering DAT-on mode on CPU restart
  s390/mm: fence off VM macros from asm and linker
  s390: include linux/io.h instead of asm/io.h
  s390/ptrace: make all psw related defines also available for asm
  s390/ptrace: remove PSW_DEFAULT_KEY from uapi
  s390/vdso: filter out mno-pic-data-is-text-relative cflag
  s390: consistently use .balign instead of .align
  s390/decompressor: fix misaligned symbol build error
  ...

Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost

2023-07-03T22:38:26+00:00

Pull virtio updates from Michael Tsirkin:

 - resume support in vdpa/solidrun

 - structure size optimizations in virtio_pci

 - new pds_vdpa driver

 - immediate initialization mechanism for vdpa/ifcvf

 - interrupt bypass for vdpa/mlx5

 - multiple worker support for vhost

 - viirtio net in Intel F2000X-PL support for vdpa/ifcvf

 - fixes, cleanups all over the place

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (48 commits)
  vhost: Make parameter name match of vhost_get_vq_desc()
  vduse: fix NULL pointer dereference
  vhost: Allow worker switching while work is queueing
  vhost_scsi: add support for worker ioctls
  vhost: allow userspace to create workers
  vhost: replace single worker pointer with xarray
  vhost: add helper to parse userspace vring state/file
  vhost: remove vhost_work_queue
  vhost_scsi: flush IO vqs then send TMF rsp
  vhost_scsi: convert to vhost_vq_work_queue
  vhost_scsi: make SCSI cmd completion per vq
  vhost_sock: convert to vhost_vq_work_queue
  vhost: convert poll work to be vq based
  vhost: take worker or vq for flushing
  vhost: take worker or vq instead of dev for queueing
  vhost, vhost_net: add helper to check if vq has work
  vhost: add vhost_worker pointer to vhost_virtqueue
  vhost: dynamically allocate vhost_worker
  vhost: create worker at end of vhost_dev_set_owner
  virtio_bt: call scheduler when we free unused buffs
  ...

virtio-crypto: call scheduler when we free unused buffs

2023-07-03T16:15:12+00:00

For virtio-net we were getting CPU stall warnings, and fixed it by
calling the scheduler: see f8bb51043945 ("virtio_net: suppress cpu stall
when free_unused_bufs").

This driver is similar so theoretically the same logic applies.

Signed-off-by: Xianting Tian 
Message-Id: <20230609131817.712867-2-xianting.tian@linux.alibaba.com>
Signed-off-by: Michael S. Tsirkin