linux-stable.git/drivers/crypto, branch v5.7.5

crypto: stm32/crc32 - fix multi-instance

2020-06-22T07:32:47+00:00

[ Upstream commit 10b89c43a64eb0d236903b79a3bc9d8f6cbfd9c7 ]

Ensure CRC algorithm is registered only once in crypto framework when
there are several instances of CRC devices.

Update the CRC device list management to avoid that only the first CRC
instance is used.

Fixes: b51dbe90912a ("crypto: stm32 - Support for STM32 CRC32 crypto module")

Signed-off-by: Nicolas Toromanoff 
Signed-off-by: Herbert Xu 
Signed-off-by: Sasha Levin

crypto: stm32/crc32 - fix run-time self test issue.

2020-06-22T07:32:47+00:00

[ Upstream commit a8cc3128bf2c01c4d448fe17149e87132113b445 ]

Fix wrong crc32 initialisation value:
"alg: shash: stm32_crc32 test failed (wrong result) on test vector 0,
cfg="init+update+final aligned buffer"
cra_name="crc32c" expects an init value of 0XFFFFFFFF,
cra_name="crc32" expects an init value of 0.

Fixes: b51dbe90912a ("crypto: stm32 - Support for STM32 CRC32 crypto module")

Signed-off-by: Nicolas Toromanoff 
Signed-off-by: Herbert Xu 
Signed-off-by: Sasha Levin

crypto: stm32/crc32 - fix ext4 chksum BUG_ON()

2020-06-22T07:32:47+00:00

[ Upstream commit 49c2c082e00e0bc4f5cbb7c21c7f0f873b35ab09 ]

Allow use of crc_update without prior call to crc_init.
And change (and fix) driver to use CRC device even on unaligned buffers.

Fixes: b51dbe90912a ("crypto: stm32 - Support for STM32 CRC32 crypto module")

Signed-off-by: Nicolas Toromanoff 
Signed-off-by: Herbert Xu 
Signed-off-by: Sasha Levin

Crypto/chcr: fix for ccm(aes) failed test

2020-06-22T07:32:39+00:00

[ Upstream commit 10b0c75d7bc19606fa9a62c8ab9180e95c0e0385 ]

The ccm(aes) test fails when req->assoclen > ~240bytes.

The problem is the value assigned to auth_offset is wrong.
As auth_offset is unsigned char, it can take max value as 255.
So fix it by making it unsigned int.

Signed-off-by: Ayush Sawal 
Signed-off-by: Devulapally Shiva Krishna 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

Crypto/chcr: fix ctr, cbc, xts and rfc3686-ctr failed tests

2020-06-22T07:32:39+00:00

[ Upstream commit 6b363a286cd01961423f5dcd648b265088ec56d0 ]

This solves the following issues observed during self test when
CONFIG_CRYPTO_MANAGER_EXTRA_TESTS is enabled.

1. Added fallback for cbc, ctr and rfc3686 if req->nbytes is zero
and for xts added a fallback case if req->nbytes is not multiple of 16.

2. In case of cbc-aes, solved wrong iv update. When
chcr_cipher_fallback() is called, used req->info pointer instead of
reqctx->iv.

3. In cbc-aes decryption there was a wrong result. This occurs when
chcr_cipher_fallback() is called from chcr_handle_cipher_resp().
In the fallback function iv(req->info) used is wrongly updated.
So use the initial iv for this case.

4)In case of ctr-aes encryption observed wrong result. In adjust_ctr_overflow()
there is condition which checks if ((bytes / AES_BLOCK_SIZE) > c),
where c is the number of blocks which can be processed without iv overflow,
but for the above bytes (req->nbytes < 32 , not a multiple of 16) this
condition fails and the 2nd block is corrupted as it requires the rollover iv.
So added a '=' condition in this to take care of this.

5)In rfc3686-ctr there was wrong result observed. This occurs when
chcr_cipher_fallback() is called from chcr_handle_cipher_resp().
Here also copying initial_iv in init_iv pointer for handling the fallback
case correctly.

Signed-off-by: Ayush Sawal 
Signed-off-by: Devulapally Shiva Krishna 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

Crypto/chcr: Fixes a coccinile check error

2020-06-22T07:32:27+00:00

[ Upstream commit 055be6865dea6743b090d1c55c8d21a5e01df201 ]

This fixes an error observed after running coccinile check.
drivers/crypto/chelsio/chcr_algo.c:1462:5-8: Unneeded variable:
"err". Return "0" on line 1480

This line is missed in the commit 567be3a5d227 ("crypto:
chelsio - Use multiple txq/rxq per tfm to process the requests").

Fixes: 567be3a5d227 ("crypto:
chelsio - Use multiple txq/rxq per tfm to process the requests").

V1->V2
-Modified subject.

Signed-off-by: Ayush Sawal 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

crypto: ccp -- don't "select" CONFIG_DMADEVICES

2020-06-22T07:32:16+00:00

[ Upstream commit eebac678556d6927f09a992872f4464cf3aecc76 ]

DMADEVICES is the top-level option for the slave DMA
subsystem, and should not be selected by device drivers,
as this can cause circular dependencies such as:

drivers/net/ethernet/freescale/Kconfig:6:error: recursive dependency detected!
drivers/net/ethernet/freescale/Kconfig:6:	symbol NET_VENDOR_FREESCALE depends on PPC_BESTCOMM
drivers/dma/bestcomm/Kconfig:6:	symbol PPC_BESTCOMM depends on DMADEVICES
drivers/dma/Kconfig:6:	symbol DMADEVICES is selected by CRYPTO_DEV_SP_CCP
drivers/crypto/ccp/Kconfig:10:	symbol CRYPTO_DEV_SP_CCP depends on CRYPTO
crypto/Kconfig:16:	symbol CRYPTO is selected by LIBCRC32C
lib/Kconfig:222:	symbol LIBCRC32C is selected by LIQUIDIO
drivers/net/ethernet/cavium/Kconfig:65:	symbol LIQUIDIO depends on PTP_1588_CLOCK
drivers/ptp/Kconfig:8:	symbol PTP_1588_CLOCK is implied by FEC
drivers/net/ethernet/freescale/Kconfig:23:	symbol FEC depends on NET_VENDOR_FREESCALE

The LIQUIDIO driver causing this problem is addressed in a
separate patch, but this change is needed to prevent it from
happening again.

Using "depends on DMADEVICES" is what we do for all other
implementations of slave DMA controllers as well.

Fixes: b3c2fee5d66b ("crypto: ccp - Ensure all dependencies are specified")
Signed-off-by: Arnd Bergmann 
Acked-by: Tom Lendacky 
Signed-off-by: Herbert Xu 
Signed-off-by: Sasha Levin

crypto: virtio: Fix src/dst scatterlist calculation in __virtio_crypto_skcipher_do_req()

2020-06-17T14:42:56+00:00

commit b02989f37fc5e865ceeee9070907e4493b3a21e2 upstream.

The system will crash when the users insmod crypto/tcrypt.ko with mode=38
( testing "cts(cbc(aes))" ).

Usually the next entry of one sg will be @sg@ + 1, but if this sg element
is part of a chained scatterlist, it could jump to the start of a new
scatterlist array. Fix it by sg_next() on calculation of src/dst
scatterlist.

Fixes: dbaf0624ffa5 ("crypto: add virtio-crypto driver")
Reported-by: LABBE Corentin 
Cc: Herbert Xu 
Cc: "Michael S. Tsirkin" 
Cc: Jason Wang 
Cc: "David S. Miller" 
Cc: virtualization@lists.linux-foundation.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200123101000.GB24255@Red
Signed-off-by: Gonglei 
Signed-off-by: Longpeng(Mike) 
Link: https://lore.kernel.org/r/20200602070501.2023-2-longpeng2@huawei.com
Signed-off-by: Michael S. Tsirkin 
Signed-off-by: Greg Kroah-Hartman

crypto: virtio: Fix use-after-free in virtio_crypto_skcipher_finalize_req()

2020-06-17T14:42:56+00:00

commit 8c855f0720ff006d75d0a2512c7f6c4f60ff60ee upstream.

The system'll crash when the users insmod crypto/tcrypto.ko with mode=155
( testing "authenc(hmac(sha1),cbc(aes))" ). It's caused by reuse the memory
of request structure.

In crypto_authenc_init_tfm(), the reqsize is set to:
  [PART 1] sizeof(authenc_request_ctx) +
  [PART 2] ictx->reqoff +
  [PART 3] MAX(ahash part, skcipher part)
and the 'PART 3' is used by both ahash and skcipher in turn.

When the virtio_crypto driver finish skcipher req, it'll call ->complete
callback(in crypto_finalize_skcipher_request) and then free its
resources whose pointers are recorded in 'skcipher parts'.

However, the ->complete is 'crypto_authenc_encrypt_done' in this case,
it will use the 'ahash part' of the request and change its content,
so virtio_crypto driver will get the wrong pointer after ->complete
finish and mistakenly free some other's memory. So the system will crash
when these memory will be used again.

The resources which need to be cleaned up are not used any more. But the
pointers of these resources may be changed in the function
"crypto_finalize_skcipher_request". Thus release specific resources before
calling this function.

Fixes: dbaf0624ffa5 ("crypto: add virtio-crypto driver")
Reported-by: LABBE Corentin 
Cc: Gonglei 
Cc: Herbert Xu 
Cc: "Michael S. Tsirkin" 
Cc: Jason Wang 
Cc: "David S. Miller" 
Cc: virtualization@lists.linux-foundation.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200123101000.GB24255@Red
Acked-by: Gonglei 
Signed-off-by: Longpeng(Mike) 
Link: https://lore.kernel.org/r/20200602070501.2023-3-longpeng2@huawei.com
Signed-off-by: Michael S. Tsirkin 
Signed-off-by: Greg Kroah-Hartman

crypto: virtio: Fix dest length calculation in __virtio_crypto_skcipher_do_req()

2020-06-17T14:42:56+00:00

commit d90ca42012db2863a9a30b564a2ace6016594bda upstream.

The src/dst length is not aligned with AES_BLOCK_SIZE(which is 16) in some
testcases in tcrypto.ko.

For example, the src/dst length of one of cts(cbc(aes))'s testcase is 17, the
crypto_virtio driver will set @src_data_len=16 but @dst_data_len=17 in this
case and get a wrong at then end.

  SRC: pp pp pp pp pp pp pp pp pp pp pp pp pp pp pp pp pp (17 bytes)
  EXP: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc pp (17 bytes)
  DST: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc 00 (pollute the last bytes)
  (pp: plaintext  cc:ciphertext)

Fix this issue by limit the length of dest buffer.

Fixes: dbaf0624ffa5 ("crypto: add virtio-crypto driver")
Cc: Gonglei 
Cc: Herbert Xu 
Cc: "Michael S. Tsirkin" 
Cc: Jason Wang 
Cc: "David S. Miller" 
Cc: virtualization@lists.linux-foundation.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Longpeng(Mike) 
Link: https://lore.kernel.org/r/20200602070501.2023-4-longpeng2@huawei.com
Signed-off-by: Michael S. Tsirkin 
Signed-off-by: Greg Kroah-Hartman