linux-stable.git/drivers/crypto, branch v5.4.166

crypto: qat - disregard spurious PFVF interrupts

2021-11-17T08:48:36+00:00

[ Upstream commit 18fcba469ba5359c1de7e3fb16f7b9e8cd1b8e02 ]

Upon receiving a PFVF message, check if the interrupt bit is set in the
message. If it is not, that means that the interrupt was probably
triggered by a collision. In this case, disregard the message and
re-enable the interrupts.

Fixes: ed8ccaef52fa ("crypto: qat - Add support for SRIOV")
Signed-off-by: Giovanni Cabiddu 
Reviewed-by: Marco Chiappero 
Signed-off-by: Herbert Xu 
Signed-off-by: Sasha Levin

crypto: qat - detect PFVF collision after ACK

2021-11-17T08:48:36+00:00

[ Upstream commit 9b768e8a3909ac1ab39ed44a3933716da7761a6f ]

Detect a PFVF collision between the local and the remote function by
checking if the message on the PFVF CSR has been overwritten.
This is done after the remote function confirms that the message has
been received, by clearing the interrupt bit, or the maximum number of
attempts (ADF_IOV_MSG_ACK_MAX_RETRY) to check the CSR has been exceeded.

Fixes: ed8ccaef52fa ("crypto: qat - Add support for SRIOV")
Signed-off-by: Giovanni Cabiddu 
Co-developed-by: Marco Chiappero 
Signed-off-by: Marco Chiappero 
Signed-off-by: Herbert Xu 
Signed-off-by: Sasha Levin

crypto: caam - disable pkc for non-E SoCs

2021-11-17T08:48:34+00:00

[ Upstream commit f20311cc9c58052e0b215013046cbf390937910c ]

On newer CAAM versions, not all accelerators are disabled if the SoC is
a non-E variant. While the driver checks most of the modules for
availability, there is one - PKHA - which sticks out. On non-E variants
it is still reported as available, that is the number of instances is
non-zero, but it has limited functionality. In particular it doesn't
support encryption and decryption, but just signing and verifying. This
is indicated by a bit in the PKHA_MISC field. Take this bit into account
if we are checking for availability.

This will the following error:
[    8.167817] caam_jr 8020000.jr: 20000b0f: CCB: desc idx 11: : Invalid CHA selected.

Tested on an NXP LS1028A (non-E) SoC.

Fixes: d239b10d4ceb ("crypto: caam - add register map changes cf. Era 10")
Signed-off-by: Michael Walle 
Reviewed-by: Horia Geantă 
Signed-off-by: Herbert Xu 
Signed-off-by: Sasha Levin

crypto: s5p-sss - Add error handling in s5p_aes_probe()

2021-11-17T08:48:17+00:00

commit a472cc0dde3eb057db71c80f102556eeced03805 upstream.

The function s5p_aes_probe() does not perform sufficient error
checking after executing platform_get_resource(), thus fix it.

Fixes: c2afad6c6105 ("crypto: s5p-sss - Add HASH support for Exynos")
Cc: 
Signed-off-by: Tang Bin 
Reviewed-by: Krzysztof Kozlowski 
Signed-off-by: Herbert Xu 
Signed-off-by: Greg Kroah-Hartman

crypto: ccp - fix resource leaks in ccp_run_aes_gcm_cmd()

2021-10-06T13:42:39+00:00

commit 505d9dcb0f7ddf9d075e729523a33d38642ae680 upstream.

There are three bugs in this code:

1) If we ccp_init_data() fails for &src then we need to free aad.
   Use goto e_aad instead of goto e_ctx.
2) The label to free the &final_wa was named incorrectly as "e_tag" but
   it should have been "e_final_wa".  One error path leaked &final_wa.
3) The &tag was leaked on one error path.  In that case, I added a free
   before the goto because the resource was local to that block.

Fixes: 36cf515b9bbe ("crypto: ccp - Enable support for AES GCM on v5 CCPs")
Reported-by: "minihanshen(沈明航)" 
Signed-off-by: Dan Carpenter 
Reviewed-by: John Allen 
Tested-by: John Allen 
Signed-off-by: Herbert Xu 
Signed-off-by: Greg Kroah-Hartman

crypto: mxs-dcp - Use sg_mapping_iter to copy data

2021-09-22T10:26:26+00:00

[ Upstream commit 2e6d793e1bf07fe5e20cfbbdcec9e1af7e5097eb ]

This uses the sg_pcopy_from_buffer to copy data, instead of doing it
ourselves.

In addition to reducing code size, this fixes the following oops
resulting from failing to kmap the page:

[   68.896381] Unable to handle kernel NULL pointer dereference at virtual address 00000ab8
[   68.904539] pgd = 3561adb3
[   68.907475] [00000ab8] *pgd=00000000
[   68.911153] Internal error: Oops: 805 [#1] ARM
[   68.915618] Modules linked in: cfg80211 rfkill des_generic libdes arc4 libarc4 cbc ecb algif_skcipher sha256_generic libsha256 sha1_generic hmac aes_generic libaes cmac sha512_generic md5 md4 algif_hash af_alg i2c_imx i2c_core ci_hdrc_imx ci_hdrc mxs_dcp ulpi roles udc_core imx_sdma usbmisc_imx usb_common firmware_class virt_dma phy_mxs_usb nf_tables nfnetlink ip_tables x_tables ipv6 autofs4
[   68.950741] CPU: 0 PID: 139 Comm: mxs_dcp_chan/ae Not tainted 5.10.34 #296
[   68.958501] Hardware name: Freescale i.MX6 Ultralite (Device Tree)
[   68.964710] PC is at memcpy+0xa8/0x330
[   68.968479] LR is at 0xd7b2bc9d
[   68.971638] pc : []    lr : []    psr: 000f0013
[   68.977920] sp : c2cbbee4  ip : 00000010  fp : 00000010
[   68.983159] r10: 00000000  r9 : c3283a40  r8 : 1a5a6f08
[   68.988402] r7 : 4bfe0ecc  r6 : 76d8a220  r5 : c32f9050  r4 : 00000001
[   68.994945] r3 : 00000ab8  r2 : fffffff0  r1 : c32f9050  r0 : 00000ab8
[   69.001492] Flags: nzcv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
[   69.008646] Control: 10c53c7d  Table: 83664059  DAC: 00000051
[   69.014414] Process mxs_dcp_chan/ae (pid: 139, stack limit = 0x667b57ab)
[   69.021133] Stack: (0xc2cbbee4 to 0xc2cbc000)
[   69.025519] bee0:          c32f9050 c3235408 00000010 00000010 00000ab8 00000001 bf10406c
[   69.033720] bf00: 00000000 00000000 00000010 00000000 c32355d0 832fb080 00000000 c13de2fc
[   69.041921] bf20: c3628010 00000010 c33d5780 00000ab8 bf1067e8 00000002 c21e5010 c2cba000
[   69.050125] bf40: c32f8040 00000000 bf106a40 c32f9040 c3283a80 00000001 bf105240 c3234040
[   69.058327] bf60: ffffe000 c3204100 c2c69800 c2cba000 00000000 bf103b84 00000000 c2eddc54
[   69.066530] bf80: c3204144 c0140d1c c2cba000 c2c69800 c0140be8 00000000 00000000 00000000
[   69.074730] bfa0: 00000000 00000000 00000000 c0100114 00000000 00000000 00000000 00000000
[   69.082932] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[   69.091131] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
[   69.099364] [] (memcpy) from [] (dcp_chan_thread_aes+0x4e8/0x840 [mxs_dcp])
[   69.108117] [] (dcp_chan_thread_aes [mxs_dcp]) from [] (kthread+0x134/0x160)
[   69.116941] [] (kthread) from [] (ret_from_fork+0x14/0x20)
[   69.124178] Exception stack(0xc2cbbfb0 to 0xc2cbbff8)
[   69.129250] bfa0:                                     00000000 00000000 00000000 00000000
[   69.137450] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[   69.145648] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000
[   69.152289] Code: e320f000 e4803004 e4804004 e4805004 (e4806004)

Signed-off-by: Sean Anderson 
Signed-off-by: Herbert Xu 
Signed-off-by: Sasha Levin

crypto: qat - use proper type for vf_mask

2021-09-15T07:47:29+00:00

[ Upstream commit 462354d986b6a89c6449b85f17aaacf44e455216 ]

Replace vf_mask type with unsigned long to avoid a stack-out-of-bound.

This is to fix the following warning reported by KASAN the first time
adf_msix_isr_ae() gets called.

    [  692.091987] BUG: KASAN: stack-out-of-bounds in find_first_bit+0x28/0x50
    [  692.092017] Read of size 8 at addr ffff88afdf789e60 by task swapper/32/0
    [  692.092076] Call Trace:
    [  692.092089]  
    [  692.092101]  dump_stack+0x9c/0xcf
    [  692.092132]  print_address_description.constprop.0+0x18/0x130
    [  692.092164]  ? find_first_bit+0x28/0x50
    [  692.092185]  kasan_report.cold+0x7f/0x111
    [  692.092213]  ? static_obj+0x10/0x80
    [  692.092234]  ? find_first_bit+0x28/0x50
    [  692.092262]  find_first_bit+0x28/0x50
    [  692.092288]  adf_msix_isr_ae+0x16e/0x230 [intel_qat]

Fixes: ed8ccaef52fa ("crypto: qat - Add support for SRIOV")
Signed-off-by: Giovanni Cabiddu 
Reviewed-by: Marco Chiappero 
Reviewed-by: Fiona Trahe 
Signed-off-by: Herbert Xu 
Signed-off-by: Sasha Levin

crypto: qat - do not export adf_iov_putmsg()

2021-09-15T07:47:28+00:00

[ Upstream commit 645ae0af1840199086c33e4f841892ebee73f615 ]

The function adf_iov_putmsg() is only used inside the intel_qat module
therefore should not be exported.
Remove EXPORT_SYMBOL for the function adf_iov_putmsg().

Signed-off-by: Giovanni Cabiddu 
Reviewed-by: Fiona Trahe 
Signed-off-by: Herbert Xu 
Signed-off-by: Sasha Levin

crypto: qat - fix naming for init/shutdown VF to PF notifications

2021-09-15T07:47:28+00:00

[ Upstream commit b90c1c4d3fa8cd90f4e8245b13564380fd0bfad1 ]

At start and shutdown, VFs notify the PF about their state. These
notifications are carried out through a message exchange using the PFVF
protocol.

Function names lead to believe they do perform init or shutdown logic.
This is to fix the naming to better reflect their purpose.

Signed-off-by: Marco Chiappero 
Co-developed-by: Giovanni Cabiddu 
Signed-off-by: Giovanni Cabiddu 
Reviewed-by: Fiona Trahe 
Signed-off-by: Herbert Xu 
Signed-off-by: Sasha Levin

crypto: qat - fix reuse of completion variable

2021-09-15T07:47:28+00:00

[ Upstream commit 3d655732b0199562267a05c7ff69ecdd11632939 ]

Use reinit_completion() to set to a clean state a completion variable,
used to coordinate the VF to PF request-response flow, before every
new VF request.

Signed-off-by: Marco Chiappero 
Co-developed-by: Giovanni Cabiddu 
Signed-off-by: Giovanni Cabiddu 
Reviewed-by: Fiona Trahe 
Signed-off-by: Herbert Xu 
Signed-off-by: Sasha Levin