linux-stable.git/drivers/crypto, branch v4.4.286

crypto: mxs-dcp - Use sg_mapping_iter to copy data

2021-09-22T09:41:23+00:00

[ Upstream commit 2e6d793e1bf07fe5e20cfbbdcec9e1af7e5097eb ]

This uses the sg_pcopy_from_buffer to copy data, instead of doing it
ourselves.

In addition to reducing code size, this fixes the following oops
resulting from failing to kmap the page:

[   68.896381] Unable to handle kernel NULL pointer dereference at virtual address 00000ab8
[   68.904539] pgd = 3561adb3
[   68.907475] [00000ab8] *pgd=00000000
[   68.911153] Internal error: Oops: 805 [#1] ARM
[   68.915618] Modules linked in: cfg80211 rfkill des_generic libdes arc4 libarc4 cbc ecb algif_skcipher sha256_generic libsha256 sha1_generic hmac aes_generic libaes cmac sha512_generic md5 md4 algif_hash af_alg i2c_imx i2c_core ci_hdrc_imx ci_hdrc mxs_dcp ulpi roles udc_core imx_sdma usbmisc_imx usb_common firmware_class virt_dma phy_mxs_usb nf_tables nfnetlink ip_tables x_tables ipv6 autofs4
[   68.950741] CPU: 0 PID: 139 Comm: mxs_dcp_chan/ae Not tainted 5.10.34 #296
[   68.958501] Hardware name: Freescale i.MX6 Ultralite (Device Tree)
[   68.964710] PC is at memcpy+0xa8/0x330
[   68.968479] LR is at 0xd7b2bc9d
[   68.971638] pc : []    lr : []    psr: 000f0013
[   68.977920] sp : c2cbbee4  ip : 00000010  fp : 00000010
[   68.983159] r10: 00000000  r9 : c3283a40  r8 : 1a5a6f08
[   68.988402] r7 : 4bfe0ecc  r6 : 76d8a220  r5 : c32f9050  r4 : 00000001
[   68.994945] r3 : 00000ab8  r2 : fffffff0  r1 : c32f9050  r0 : 00000ab8
[   69.001492] Flags: nzcv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
[   69.008646] Control: 10c53c7d  Table: 83664059  DAC: 00000051
[   69.014414] Process mxs_dcp_chan/ae (pid: 139, stack limit = 0x667b57ab)
[   69.021133] Stack: (0xc2cbbee4 to 0xc2cbc000)
[   69.025519] bee0:          c32f9050 c3235408 00000010 00000010 00000ab8 00000001 bf10406c
[   69.033720] bf00: 00000000 00000000 00000010 00000000 c32355d0 832fb080 00000000 c13de2fc
[   69.041921] bf20: c3628010 00000010 c33d5780 00000ab8 bf1067e8 00000002 c21e5010 c2cba000
[   69.050125] bf40: c32f8040 00000000 bf106a40 c32f9040 c3283a80 00000001 bf105240 c3234040
[   69.058327] bf60: ffffe000 c3204100 c2c69800 c2cba000 00000000 bf103b84 00000000 c2eddc54
[   69.066530] bf80: c3204144 c0140d1c c2cba000 c2c69800 c0140be8 00000000 00000000 00000000
[   69.074730] bfa0: 00000000 00000000 00000000 c0100114 00000000 00000000 00000000 00000000
[   69.082932] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[   69.091131] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
[   69.099364] [] (memcpy) from [] (dcp_chan_thread_aes+0x4e8/0x840 [mxs_dcp])
[   69.108117] [] (dcp_chan_thread_aes [mxs_dcp]) from [] (kthread+0x134/0x160)
[   69.116941] [] (kthread) from [] (ret_from_fork+0x14/0x20)
[   69.124178] Exception stack(0xc2cbbfb0 to 0xc2cbbff8)
[   69.129250] bfa0:                                     00000000 00000000 00000000 00000000
[   69.137450] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[   69.145648] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000
[   69.152289] Code: e320f000 e4803004 e4804004 e4805004 (e4806004)

Signed-off-by: Sean Anderson 
Signed-off-by: Herbert Xu 
Signed-off-by: Sasha Levin

crypto: qat - fix reuse of completion variable

2021-09-22T09:41:19+00:00

[ Upstream commit 3d655732b0199562267a05c7ff69ecdd11632939 ]

Use reinit_completion() to set to a clean state a completion variable,
used to coordinate the VF to PF request-response flow, before every
new VF request.

Signed-off-by: Marco Chiappero 
Co-developed-by: Giovanni Cabiddu 
Signed-off-by: Giovanni Cabiddu 
Reviewed-by: Fiona Trahe 
Signed-off-by: Herbert Xu 
Signed-off-by: Sasha Levin

crypto: qat - do not ignore errors from enable_vf2pf_comms()

2021-09-22T09:41:19+00:00

[ Upstream commit 5147f0906d50a9d26f2b8698cd06b5680e9867ff ]

The function adf_dev_init() ignores the error code reported by
enable_vf2pf_comms(). If the latter fails, e.g. the VF is not compatible
with the pf, then the load of the VF driver progresses.
This patch changes adf_dev_init() so that the error code from
enable_vf2pf_comms() is returned to the caller.

Signed-off-by: Giovanni Cabiddu 
Reviewed-by: Marco Chiappero 
Reviewed-by: Fiona Trahe 
Signed-off-by: Herbert Xu 
Signed-off-by: Sasha Levin

crypto: omap-sham - clear dma flags only after omap_sham_update_dma_stop()

2021-09-22T09:41:19+00:00

[ Upstream commit fe28140b3393b0ba1eb95cc109f974a7e58b26fd ]

We should not clear FLAGS_DMA_ACTIVE before omap_sham_update_dma_stop() is
done calling dma_unmap_sg(). We already clear FLAGS_DMA_ACTIVE at the
end of omap_sham_update_dma_stop().

The early clearing of FLAGS_DMA_ACTIVE is not causing issues as we do not
need to defer anything based on FLAGS_DMA_ACTIVE currently. So this can be
applied as clean-up.

Cc: Lokesh Vutla 
Cc: Tero Kristo 
Signed-off-by: Tony Lindgren 
Signed-off-by: Herbert Xu 
Signed-off-by: Sasha Levin

crypto: mxs-dcp - Check for DMA mapping errors

2021-09-22T09:41:19+00:00

[ Upstream commit df6313d707e575a679ada3313358289af24454c0 ]

After calling dma_map_single(), we must also call dma_mapping_error().
This fixes the following warning when compiling with CONFIG_DMA_API_DEBUG:

[  311.241478] WARNING: CPU: 0 PID: 428 at kernel/dma/debug.c:1027 check_unmap+0x79c/0x96c
[  311.249547] DMA-API: mxs-dcp 2280000.crypto: device driver failed to check map error[device address=0x00000000860cb080] [size=32 bytes] [mapped as single]

Signed-off-by: Sean Anderson 
Reviewed-by: Richard Weinberger 
Signed-off-by: Herbert Xu 
Signed-off-by: Sasha Levin

crypto: nx - Fix RCU warning in nx842_OF_upd_status

2021-07-20T14:22:34+00:00

[ Upstream commit 2a96726bd0ccde4f12b9b9a9f61f7b1ac5af7e10 ]

The function nx842_OF_upd_status triggers a sparse RCU warning when
it directly dereferences the RCU-protected devdata.  This appears
to be an accident as there was another variable of the same name
that was passed in from the caller.

After it was removed (because the main purpose of using it, to
update the status member was itself removed) the global variable
unintenionally stood in as its replacement.

This patch restores the devdata parameter.

Fixes: 90fd73f912f0 ("crypto: nx - remove pSeries NX 'status' field")
Signed-off-by: Herbert Xu 
Signed-off-by: Sasha Levin

crypto: ux500 - Fix error return code in hash_hw_final()

2021-07-20T14:22:33+00:00

[ Upstream commit b01360384009ab066940b45f34880991ea7ccbfb ]

Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.

Fixes: 8a63b1994c50 ("crypto: ux500 - Add driver for HASH hardware")
Reported-by: Hulk Robot 
Signed-off-by: Zhen Lei 
Reviewed-by: Linus Walleij 
Signed-off-by: Herbert Xu 
Signed-off-by: Sasha Levin

crypto: ixp4xx - dma_unmap the correct address

2021-07-20T14:22:33+00:00

[ Upstream commit 9395c58fdddd79cdd3882132cdd04e8ac7ad525f ]

Testing ixp4xx_crypto with CONFIG_DMA_API_DEBUG lead to the following error:
DMA-API: platform ixp4xx_crypto.0: device driver tries to free DMA memory it has not allocated [device address=0x0000000000000000] [size=24 bytes]

This is due to dma_unmap using the wrong address.

Fixes: 0d44dc59b2b4 ("crypto: ixp4xx - Fix handling of chained sg buffers")
Signed-off-by: Corentin Labbe 
Signed-off-by: Herbert Xu 
Signed-off-by: Sasha Levin

crypto: qat - remove unused macro in FW loader

2021-07-20T14:22:32+00:00

[ Upstream commit 9afe77cf25d9670e61b489fd52cc6f75fd7f6803 ]

Remove the unused macro ICP_DH895XCC_PESRAM_BAR_SIZE in the firmware
loader.

This is to fix the following warning when compiling the driver using the
clang compiler with CC=clang W=2:

    drivers/crypto/qat/qat_common/qat_uclo.c:345:9: warning: macro is not used [-Wunused-macros]

Signed-off-by: Jack Xu 
Co-developed-by: Zhehui Xiang 
Signed-off-by: Zhehui Xiang 
Reviewed-by: Giovanni Cabiddu 
Signed-off-by: Herbert Xu 
Signed-off-by: Sasha Levin

crypto: qat - check return code of qat_hal_rd_rel_reg()

2021-07-20T14:22:32+00:00

[ Upstream commit 96b57229209490c8bca4335b01a426a96173dc56 ]

Check the return code of the function qat_hal_rd_rel_reg() and return it
to the caller.

This is to fix the following warning when compiling the driver with
clang scan-build:

    drivers/crypto/qat/qat_common/qat_hal.c:1436:2: warning: 6th function call argument is an uninitialized value

Signed-off-by: Jack Xu 
Co-developed-by: Zhehui Xiang 
Signed-off-by: Zhehui Xiang 
Reviewed-by: Giovanni Cabiddu 
Signed-off-by: Herbert Xu 
Signed-off-by: Sasha Levin