linux-stable.git/drivers/crypto, branch v4.19.239

crypto: ccp - ccp_dmaengine_unregister release dma channels

2022-04-15T12:14:44+00:00

[ Upstream commit 54cce8ecb9254f971b40a72911c6da403720a2d2 ]

ccp_dmaengine_register adds dma_chan->device_node to dma_dev->channels list
but ccp_dmaengine_unregister didn't remove them.
That can cause crashes in various dmaengine methods that tries to use dma_dev->channels

Fixes: 58ea8abf4904 ("crypto: ccp - Register the CCP as a DMA...")
Signed-off-by: Dāvis Mosāns 
Acked-by: John Allen 
Signed-off-by: Herbert Xu 
Signed-off-by: Sasha Levin

crypto: vmx - add missing dependencies

2022-04-15T12:14:43+00:00

[ Upstream commit 647d41d3952d726d4ae49e853a9eff68ebad3b3f ]

vmx-crypto module depends on CRYPTO_AES, CRYPTO_CBC, CRYPTO_CTR or
CRYPTO_XTS, thus add them.

These dependencies are likely to be enabled, but if
CRYPTO_DEV_VMX=y && !CRYPTO_MANAGER_DISABLE_TESTS
and either of CRYPTO_AES, CRYPTO_CBC, CRYPTO_CTR or CRYPTO_XTS is built
as module or disabled, alg_test() from crypto/testmgr.c complains during
boot about failing to allocate the generic fallback implementations
(2 == ENOENT):

[    0.540953] Failed to allocate xts(aes) fallback: -2
[    0.541014] alg: skcipher: failed to allocate transform for p8_aes_xts: -2
[    0.541120] alg: self-tests for p8_aes_xts (xts(aes)) failed (rc=-2)
[    0.544440] Failed to allocate ctr(aes) fallback: -2
[    0.544497] alg: skcipher: failed to allocate transform for p8_aes_ctr: -2
[    0.544603] alg: self-tests for p8_aes_ctr (ctr(aes)) failed (rc=-2)
[    0.547992] Failed to allocate cbc(aes) fallback: -2
[    0.548052] alg: skcipher: failed to allocate transform for p8_aes_cbc: -2
[    0.548156] alg: self-tests for p8_aes_cbc (cbc(aes)) failed (rc=-2)
[    0.550745] Failed to allocate transformation for 'aes': -2
[    0.550801] alg: cipher: Failed to load transform for p8_aes: -2
[    0.550892] alg: self-tests for p8_aes (aes) failed (rc=-2)

Fixes: c07f5d3da643 ("crypto: vmx - Adding support for XTS")
Fixes: d2e3ae6f3aba ("crypto: vmx - Enabling VMX module for PPC64")

Suggested-by: Nicolai Stange 
Signed-off-by: Petr Vorel 
Signed-off-by: Herbert Xu 
Signed-off-by: Sasha Levin

crypto: mxs-dcp - Fix scatterlist processing

2022-04-15T12:14:42+00:00

[ Upstream commit 28e9b6d8199a3f124682b143800c2dacdc3d70dd ]

This patch fixes a bug in scatterlist processing that may cause incorrect AES block encryption/decryption.

Fixes: 2e6d793e1bf0 ("crypto: mxs-dcp - Use sg_mapping_iter to copy data")
Signed-off-by: Tomas Paukrt 
Signed-off-by: Herbert Xu 
Signed-off-by: Sasha Levin

crypto: qat - disable registration of algorithms

2022-03-28T06:41:44+00:00

commit 8893d27ffcaf6ec6267038a177cb87bcde4dd3de upstream.

The implementations of aead and skcipher in the QAT driver do not
support properly requests with the CRYPTO_TFM_REQ_MAY_BACKLOG flag set.
If the HW queue is full, the driver returns -EBUSY but does not enqueue
the request.
This can result in applications like dm-crypt waiting indefinitely for a
completion of a request that was never submitted to the hardware.

To avoid this problem, disable the registration of all crypto algorithms
in the QAT driver by setting the number of crypto instances to 0 at
configuration time.

Cc: stable@vger.kernel.org
Signed-off-by: Giovanni Cabiddu 
Signed-off-by: Herbert Xu 
Signed-off-by: Greg Kroah-Hartman

crypto: qcom-rng - ensure buffer for generate is completely filled

2022-03-23T08:10:44+00:00

commit a680b1832ced3b5fa7c93484248fd221ea0d614b upstream.

The generate function in struct rng_alg expects that the destination
buffer is completely filled if the function returns 0. qcom_rng_read()
can run into a situation where the buffer is partially filled with
randomness and the remaining part of the buffer is zeroed since
qcom_rng_generate() doesn't check the return value. This issue can
be reproduced by running the following from libkcapi:

    kcapi-rng -b 9000000 > OUTFILE

The generated OUTFILE will have three huge sections that contain all
zeros, and this is caused by the code where the test
'val & PRNG_STATUS_DATA_AVAIL' fails.

Let's fix this issue by ensuring that qcom_rng_read() always returns
with a full buffer if the function returns success. Let's also have
qcom_rng_generate() return the correct value.

Here's some statistics from the ent project
(https://www.fourmilab.ch/random/) that shows information about the
quality of the generated numbers:

    $ ent -c qcom-random-before
    Value Char Occurrences Fraction
      0           606748   0.067416
      1            33104   0.003678
      2            33001   0.003667
    ...
    253   �        32883   0.003654
    254   �        33035   0.003671
    255   �        33239   0.003693

    Total:       9000000   1.000000

    Entropy = 7.811590 bits per byte.

    Optimum compression would reduce the size
    of this 9000000 byte file by 2 percent.

    Chi square distribution for 9000000 samples is 9329962.81, and
    randomly would exceed this value less than 0.01 percent of the
    times.

    Arithmetic mean value of data bytes is 119.3731 (127.5 = random).
    Monte Carlo value for Pi is 3.197293333 (error 1.77 percent).
    Serial correlation coefficient is 0.159130 (totally uncorrelated =
    0.0).

Without this patch, the results of the chi-square test is 0.01%, and
the numbers are certainly not random according to ent's project page.
The results improve with this patch:

    $ ent -c qcom-random-after
    Value Char Occurrences Fraction
      0            35432   0.003937
      1            35127   0.003903
      2            35424   0.003936
    ...
    253   �        35201   0.003911
    254   �        34835   0.003871
    255   �        35368   0.003930

    Total:       9000000   1.000000

    Entropy = 7.999979 bits per byte.

    Optimum compression would reduce the size
    of this 9000000 byte file by 0 percent.

    Chi square distribution for 9000000 samples is 258.77, and randomly
    would exceed this value 42.24 percent of the times.

    Arithmetic mean value of data bytes is 127.5006 (127.5 = random).
    Monte Carlo value for Pi is 3.141277333 (error 0.01 percent).
    Serial correlation coefficient is 0.000468 (totally uncorrelated =
    0.0).

This change was tested on a Nexus 5 phone (msm8974 SoC).

Signed-off-by: Brian Masney 
Fixes: ceec5f5b5988 ("crypto: qcom-rng - Add Qcom prng driver")
Cc: stable@vger.kernel.org # 4.19+
Reviewed-by: Bjorn Andersson 
Reviewed-by: Andrew Halaney 
Signed-off-by: Herbert Xu 
Signed-off-by: Greg Kroah-Hartman

crypto: stm32/crc32 - Fix kernel BUG triggered in probe()

2022-01-27T08:04:31+00:00

commit 29009604ad4e3ef784fd9b9fef6f23610ddf633d upstream.

The include/linux/crypto.h struct crypto_alg field cra_driver_name description
states "Unique name of the transformation provider. " ... " this contains the
name of the chip or provider and the name of the transformation algorithm."

In case of the stm32-crc driver, field cra_driver_name is identical for all
registered transformation providers and set to the name of the driver itself,
which is incorrect. This patch fixes it by assigning a unique cra_driver_name
to each registered transformation provider.

The kernel crash is triggered when the driver calls crypto_register_shashes()
which calls crypto_register_shash(), which calls crypto_register_alg(), which
calls __crypto_register_alg(), which returns -EEXIST, which is propagated
back through this call chain. Upon -EEXIST from crypto_register_shash(), the
crypto_register_shashes() starts unregistering the providers back, and calls
crypto_unregister_shash(), which calls crypto_unregister_alg(), and this is
where the BUG() triggers due to incorrect cra_refcnt.

Fixes: b51dbe90912a ("crypto: stm32 - Support for STM32 CRC32 crypto module")
Signed-off-by: Marek Vasut 
Cc:  # 4.12+
Cc: Alexandre Torgue 
Cc: Fabien Dessenne 
Cc: Herbert Xu 
Cc: Lionel Debieve 
Cc: Nicolas Toromanoff 
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-crypto@vger.kernel.org
Acked-by: Nicolas Toromanoff 
Signed-off-by: Herbert Xu 
Signed-off-by: Greg Kroah-Hartman

crypto: stm32/cryp - fix double pm exit

2022-01-27T08:04:19+00:00

[ Upstream commit 6c12e742785bf9333faf60bfb96575bdd763448e ]

Delete extraneous lines in probe error handling code: pm was
disabled twice.

Fixes: 65f9aa36ee47 ("crypto: stm32/cryp - Add power management support")

Reported-by: Marek Vasut 
Signed-off-by: Nicolas Toromanoff 
Signed-off-by: Herbert Xu 
Signed-off-by: Sasha Levin

crypto: qce - fix uaf on qce_ahash_register_one

2022-01-27T08:04:17+00:00

[ Upstream commit b4cb4d31631912842eb7dce02b4350cbb7562d5e ]

Pointer base points to sub field of tmpl, it
is dereferenced after tmpl is freed. Fix
this by accessing base before free tmpl.

Fixes: ec8f5d8f ("crypto: qce - Qualcomm crypto engine driver")
Signed-off-by: Chengfeng Ye 
Acked-by: Thara Gopinath 
Signed-off-by: Herbert Xu 
Signed-off-by: Sasha Levin

crypto: qat - disregard spurious PFVF interrupts

2021-11-26T10:36:08+00:00

[ Upstream commit 18fcba469ba5359c1de7e3fb16f7b9e8cd1b8e02 ]

Upon receiving a PFVF message, check if the interrupt bit is set in the
message. If it is not, that means that the interrupt was probably
triggered by a collision. In this case, disregard the message and
re-enable the interrupts.

Fixes: ed8ccaef52fa ("crypto: qat - Add support for SRIOV")
Signed-off-by: Giovanni Cabiddu 
Reviewed-by: Marco Chiappero 
Signed-off-by: Herbert Xu 
Signed-off-by: Sasha Levin

crypto: qat - detect PFVF collision after ACK

2021-11-26T10:36:08+00:00

[ Upstream commit 9b768e8a3909ac1ab39ed44a3933716da7761a6f ]

Detect a PFVF collision between the local and the remote function by
checking if the message on the PFVF CSR has been overwritten.
This is done after the remote function confirms that the message has
been received, by clearing the interrupt bit, or the maximum number of
attempts (ADF_IOV_MSG_ACK_MAX_RETRY) to check the CSR has been exceeded.

Fixes: ed8ccaef52fa ("crypto: qat - Add support for SRIOV")
Signed-off-by: Giovanni Cabiddu 
Co-developed-by: Marco Chiappero 
Signed-off-by: Marco Chiappero 
Signed-off-by: Herbert Xu 
Signed-off-by: Sasha Levin