linux-stable.git/drivers/crypto, branch linux-5.3.y

crypto: ccp - fix uninitialized list head

2019-12-13T07:49:30+00:00

commit 691505a803a7f223b2af621848d581259c61f77d upstream.

A NULL-pointer dereference was reported in fedora bz#1762199 while
reshaping a raid6 array after adding a fifth drive to an existing
array.

[   47.343549] md/raid:md0: raid level 6 active with 3 out of 5 devices, algorithm 2
[   47.804017] md0: detected capacity change from 0 to 7885289422848
[   47.822083] Unable to handle kernel read from unreadable memory at virtual address 0000000000000000
...
[   47.940477] CPU: 1 PID: 14210 Comm: md0_raid6 Tainted: G        W         5.2.18-200.fc30.aarch64 #1
[   47.949594] Hardware name: AMD Overdrive/Supercharger/To be filled by O.E.M., BIOS ROD1002C 04/08/2016
[   47.958886] pstate: 00400085 (nzcv daIf +PAN -UAO)
[   47.963668] pc : __list_del_entry_valid+0x2c/0xa8
[   47.968366] lr : ccp_tx_submit+0x84/0x168 [ccp]
[   47.972882] sp : ffff00001369b970
[   47.976184] x29: ffff00001369b970 x28: ffff00001369bdb8
[   47.981483] x27: 00000000ffffffff x26: ffff8003b758af70
[   47.986782] x25: ffff8003b758b2d8 x24: ffff8003e6245818
[   47.992080] x23: 0000000000000000 x22: ffff8003e62450c0
[   47.997379] x21: ffff8003dfd6add8 x20: 0000000000000003
[   48.002678] x19: ffff8003e6245100 x18: 0000000000000000
[   48.007976] x17: 0000000000000000 x16: 0000000000000000
[   48.013274] x15: 0000000000000000 x14: 0000000000000000
[   48.018572] x13: ffff7e000ef83a00 x12: 0000000000000001
[   48.023870] x11: ffff000010eff998 x10: 00000000000019a0
[   48.029169] x9 : 0000000000000000 x8 : ffff8003e6245180
[   48.034467] x7 : 0000000000000000 x6 : 000000000000003f
[   48.039766] x5 : 0000000000000040 x4 : ffff8003e0145080
[   48.045064] x3 : dead000000000200 x2 : 0000000000000000
[   48.050362] x1 : 0000000000000000 x0 : ffff8003e62450c0
[   48.055660] Call trace:
[   48.058095]  __list_del_entry_valid+0x2c/0xa8
[   48.062442]  ccp_tx_submit+0x84/0x168 [ccp]
[   48.066615]  async_tx_submit+0x224/0x368 [async_tx]
[   48.071480]  async_trigger_callback+0x68/0xfc [async_tx]
[   48.076784]  ops_run_biofill+0x178/0x1e8 [raid456]
[   48.081566]  raid_run_ops+0x248/0x818 [raid456]
[   48.086086]  handle_stripe+0x864/0x1208 [raid456]
[   48.090781]  handle_active_stripes.isra.0+0xb0/0x278 [raid456]
[   48.096604]  raid5d+0x378/0x618 [raid456]
[   48.100602]  md_thread+0xa0/0x150
[   48.103905]  kthread+0x104/0x130
[   48.107122]  ret_from_fork+0x10/0x18
[   48.110686] Code: d2804003 f2fbd5a3 eb03003f 54000320 (f9400021)
[   48.116766] ---[ end trace 23f390a527f7ad77 ]---

ccp_tx_submit is passed a dma_async_tx_descriptor which is contained in
a ccp_dma_desc and adds it to a ccp channel's pending list:

	list_del(&desc->entry);
	list_add_tail(&desc->entry, &chan->pending);

The problem is that desc->entry may be uninitialized in the
async_trigger_callback path where the descriptor was gotten
from ccp_prep_dma_interrupt which got it from ccp_alloc_dma_desc
which doesn't initialize the desc->entry list head. So, just
initialize the list head to avoid the problem.

Cc: 
Reported-by: Sahaj Sarup 
Signed-off-by: Mark Salter 
Acked-by: Gary R Hook 
Signed-off-by: Herbert Xu 
Signed-off-by: Greg Kroah-Hartman

crypto: geode-aes - switch to skcipher for cbc(aes) fallback

2019-12-13T07:49:28+00:00

commit 504582e8e40b90b8f8c58783e2d1e4f6a2b71a3a upstream.

Commit 79c65d179a40e145 ("crypto: cbc - Convert to skcipher") updated
the generic CBC template wrapper from a blkcipher to a skcipher algo,
to get away from the deprecated blkcipher interface. However, as a side
effect, drivers that instantiate CBC transforms using the blkcipher as
a fallback no longer work, since skciphers can wrap blkciphers but not
the other way around. This broke the geode-aes driver.

So let's fix it by moving to the sync skcipher interface when allocating
the fallback. At the same time, align with the generic API for ECB and
CBC by rejecting inputs that are not a multiple of the AES block size.

Fixes: 79c65d179a40e145 ("crypto: cbc - Convert to skcipher")
Cc:  # v4.20+ ONLY
Signed-off-by: Ard Biesheuvel 
Signed-off-by: Florian Bezdeka 
Signed-off-by: Herbert Xu 
Signed-off-by: Greg Kroah-Hartman

crypto: atmel-aes - Fix IV handling when req->nbytes < ivsize

2019-12-13T07:49:27+00:00

commit 86ef1dfcb561473fbf5e199d58d18c55554d78be upstream.

commit 394a9e044702 ("crypto: cfb - add missing 'chunksize' property")
adds a test vector where the input length is smaller than the IV length
(the second test vector). This revealed a NULL pointer dereference in
the atmel-aes driver, that is caused by passing an incorrect offset in
scatterwalk_map_and_copy() when atmel_aes_complete() is called.

Do not save the IV in req->info of ablkcipher_request (or equivalently
req->iv of skcipher_request) when req->nbytes < ivsize, because the IV
will not be further used.

While touching the code, modify the type of ivsize from int to
unsigned int, to comply with the return type of
crypto_ablkcipher_ivsize().

Fixes: 91308019ecb4 ("crypto: atmel-aes - properly set IV after {en,de}crypt")
Cc: 
Signed-off-by: Tudor Ambarus 
Signed-off-by: Herbert Xu 
Signed-off-by: Greg Kroah-Hartman

crypto: crypto4xx - fix double-free in crypto4xx_destroy_sdr

2019-12-13T07:49:26+00:00

commit 746c908c4d72e49068ab216c3926d2720d71a90d upstream.

This patch fixes a crash that can happen during probe
when the available dma memory is not enough (this can
happen if the crypto4xx is built as a module).

The descriptor window mapping would end up being free'd
twice, once in crypto4xx_build_pdr() and the second time
in crypto4xx_destroy_sdr().

Fixes: 5d59ad6eea82 ("crypto: crypto4xx - fix crypto4xx_build_pdr, crypto4xx_build_sdr leak")
Cc: 
Signed-off-by: Christian Lamparter 
Signed-off-by: Herbert Xu 
Signed-off-by: Greg Kroah-Hartman

net: use skb_queue_empty_lockless() in busy poll contexts

2019-11-10T10:34:45+00:00

[ Upstream commit 3f926af3f4d688e2e11e7f8ed04e277a14d4d4a4 ]

Busy polling usually runs without locks.
Let's use skb_queue_empty_lockless() instead of skb_queue_empty()

Also uses READ_ONCE() in __skb_try_recv_datagram() to address
a similar potential problem.

Signed-off-by: Eric Dumazet 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

inet: stop leaking jiffies on the wire

2019-11-10T10:34:33+00:00

[ Upstream commit a904a0693c189691eeee64f6c6b188bd7dc244e9 ]

Historically linux tried to stick to RFC 791, 1122, 2003
for IPv4 ID field generation.

RFC 6864 made clear that no matter how hard we try,
we can not ensure unicity of IP ID within maximum
lifetime for all datagrams with a given source
address/destination address/protocol tuple.

Linux uses a per socket inet generator (inet_id), initialized
at connection startup with a XOR of 'jiffies' and other
fields that appear clear on the wire.

Thiemo Nagel pointed that this strategy is a privacy
concern as this provides 16 bits of entropy to fingerprint
devices.

Let's switch to a random starting point, this is just as
good as far as RFC 6864 is concerned and does not leak
anything critical.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet 
Reported-by: Thiemo Nagel 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

crypto: ccree - use the full crypt length value

2019-10-11T16:36:05+00:00

commit 7a4be6c113c1f721818d1e3722a9015fe393295c upstream.

In case of AEAD decryption verifcation error we were using the
wrong value to zero out the plaintext buffer leaving the end of
the buffer with the false plaintext.

Signed-off-by: Gilad Ben-Yossef 
Fixes: ff27e85a85bb ("crypto: ccree - add AEAD support")
CC: stable@vger.kernel.org # v4.17+
Signed-off-by: Herbert Xu 
Signed-off-by: Greg Kroah-Hartman

crypto: ccree - account for TEE not ready to report

2019-10-11T16:36:04+00:00

commit 76a95bd8f9e10cade9c4c8df93b5c20ff45dc0f5 upstream.

When ccree driver runs it checks the state of the Trusted Execution
Environment CryptoCell driver before proceeding. We did not account
for cases where the TEE side is not ready or not available at all.
Fix it by only considering TEE error state after sync with the TEE
side driver.

Signed-off-by: Gilad Ben-Yossef 
Fixes: ab8ec9658f5a ("crypto: ccree - add FIPS support")
CC: stable@vger.kernel.org # v4.17+
Signed-off-by: Herbert Xu 
Signed-off-by: Greg Kroah-Hartman

crypto: caam - fix concurrency issue in givencrypt descriptor

2019-10-11T16:36:04+00:00

commit 48f89d2a2920166c35b1c0b69917dbb0390ebec7 upstream.

IV transfer from ofifo to class2 (set up at [29][30]) is not guaranteed
to be scheduled before the data transfer from ofifo to external memory
(set up at [38]:

[29] 10FA0004           ld: ind-nfifo (len=4) imm
[30] 81F00010               class2 type=msg len=16>
[31] 14820004           ld: ccb2-datasz len=4 offs=0 imm
[32] 00000010               data:0x00000010
[33] 8210010D    operation: cls1-op aes cbc init-final enc
[34] A8080B04         math: (seqin + math0)->vseqout len=4
[35] 28000010    seqfifold: skip len=16
[36] A8080A04         math: (seqin + math0)->vseqin len=4
[37] 2F1E0000    seqfifold: both msg1->2-last2-last1 len=vseqinsz
[38] 69300000   seqfifostr: msg len=vseqoutsz
[39] 5C20000C      seqstr: ccb2 ctx len=12 offs=0

If ofifo -> external memory transfer happens first, DECO will hang
(issuing a Watchdog Timeout error, if WDOG is enabled) waiting for
data availability in ofifo for the ofifo -> c2 ififo transfer.

Make sure IV transfer happens first by waiting for all CAAM internal
transfers to end before starting payload transfer.

New descriptor with jump command inserted at [37]:

[..]
[36] A8080A04         math: (seqin + math0)->vseqin len=4
[37] A1000401         jump: jsl1 all-match[!nfifopend] offset=[01] local->[38]
[38] 2F1E0000    seqfifold: both msg1->2-last2-last1 len=vseqinsz
[39] 69300000   seqfifostr: msg len=vseqoutsz
[40] 5C20000C      seqstr: ccb2 ctx len=12 offs=0

[Note: the issue is present in the descriptor from the very beginning
(cf. Fixes tag). However I've marked it v4.19+ since it's the oldest
maintained kernel that the patch applies clean against.]

Cc:  # v4.19+
Fixes: 1acebad3d8db8 ("crypto: caam - faster aead implementation")
Signed-off-by: Horia Geantă 
Signed-off-by: Herbert Xu 
Signed-off-by: Greg Kroah-Hartman

crypto: caam/qi - fix error handling in ERN handler

2019-10-11T16:36:04+00:00

commit 51fab3d73054ca5b06b26e20edac0486b052c6f4 upstream.

ERN handler calls the caam/qi frontend "done" callback with a status
of -EIO. This is incorrect, since the callback expects a status value
meaningful for the crypto engine - hence the cryptic messages
like the one below:
platform caam_qi: 15: unknown error source

Fix this by providing the callback with:
-the status returned by the crypto engine (fd[status]) in case
it contains an error, OR
-a QI "No error" code otherwise; this will trigger the message:
platform caam_qi: 50000000: Queue Manager Interface: No error
which is fine, since QMan driver provides details about the cause of
failure

Cc:  # v5.1+
Fixes: 67c2315def06 ("crypto: caam - add Queue Interface (QI) backend support")
Signed-off-by: Horia Geantă 
Reviewed-by: Iuliana Prodan 
Signed-off-by: Herbert Xu 
Signed-off-by: Greg Kroah-Hartman