linux-stable.git/drivers/crypto/virtio, branch linux-5.6.y

crypto: virtio: Fix src/dst scatterlist calculation in __virtio_crypto_skcipher_do_req()

2020-06-17T14:42:01+00:00

commit b02989f37fc5e865ceeee9070907e4493b3a21e2 upstream.

The system will crash when the users insmod crypto/tcrypt.ko with mode=38
( testing "cts(cbc(aes))" ).

Usually the next entry of one sg will be @sg@ + 1, but if this sg element
is part of a chained scatterlist, it could jump to the start of a new
scatterlist array. Fix it by sg_next() on calculation of src/dst
scatterlist.

Fixes: dbaf0624ffa5 ("crypto: add virtio-crypto driver")
Reported-by: LABBE Corentin 
Cc: Herbert Xu 
Cc: "Michael S. Tsirkin" 
Cc: Jason Wang 
Cc: "David S. Miller" 
Cc: virtualization@lists.linux-foundation.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200123101000.GB24255@Red
Signed-off-by: Gonglei 
Signed-off-by: Longpeng(Mike) 
Link: https://lore.kernel.org/r/20200602070501.2023-2-longpeng2@huawei.com
Signed-off-by: Michael S. Tsirkin 
Signed-off-by: Greg Kroah-Hartman

crypto: virtio: Fix use-after-free in virtio_crypto_skcipher_finalize_req()

2020-06-17T14:42:00+00:00

commit 8c855f0720ff006d75d0a2512c7f6c4f60ff60ee upstream.

The system'll crash when the users insmod crypto/tcrypto.ko with mode=155
( testing "authenc(hmac(sha1),cbc(aes))" ). It's caused by reuse the memory
of request structure.

In crypto_authenc_init_tfm(), the reqsize is set to:
  [PART 1] sizeof(authenc_request_ctx) +
  [PART 2] ictx->reqoff +
  [PART 3] MAX(ahash part, skcipher part)
and the 'PART 3' is used by both ahash and skcipher in turn.

When the virtio_crypto driver finish skcipher req, it'll call ->complete
callback(in crypto_finalize_skcipher_request) and then free its
resources whose pointers are recorded in 'skcipher parts'.

However, the ->complete is 'crypto_authenc_encrypt_done' in this case,
it will use the 'ahash part' of the request and change its content,
so virtio_crypto driver will get the wrong pointer after ->complete
finish and mistakenly free some other's memory. So the system will crash
when these memory will be used again.

The resources which need to be cleaned up are not used any more. But the
pointers of these resources may be changed in the function
"crypto_finalize_skcipher_request". Thus release specific resources before
calling this function.

Fixes: dbaf0624ffa5 ("crypto: add virtio-crypto driver")
Reported-by: LABBE Corentin 
Cc: Gonglei 
Cc: Herbert Xu 
Cc: "Michael S. Tsirkin" 
Cc: Jason Wang 
Cc: "David S. Miller" 
Cc: virtualization@lists.linux-foundation.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200123101000.GB24255@Red
Acked-by: Gonglei 
Signed-off-by: Longpeng(Mike) 
Link: https://lore.kernel.org/r/20200602070501.2023-3-longpeng2@huawei.com
Signed-off-by: Michael S. Tsirkin 
Signed-off-by: Greg Kroah-Hartman

crypto: virtio: Fix dest length calculation in __virtio_crypto_skcipher_do_req()

2020-06-17T14:42:00+00:00

commit d90ca42012db2863a9a30b564a2ace6016594bda upstream.

The src/dst length is not aligned with AES_BLOCK_SIZE(which is 16) in some
testcases in tcrypto.ko.

For example, the src/dst length of one of cts(cbc(aes))'s testcase is 17, the
crypto_virtio driver will set @src_data_len=16 but @dst_data_len=17 in this
case and get a wrong at then end.

  SRC: pp pp pp pp pp pp pp pp pp pp pp pp pp pp pp pp pp (17 bytes)
  EXP: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc pp (17 bytes)
  DST: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc 00 (pollute the last bytes)
  (pp: plaintext  cc:ciphertext)

Fix this issue by limit the length of dest buffer.

Fixes: dbaf0624ffa5 ("crypto: add virtio-crypto driver")
Cc: Gonglei 
Cc: Herbert Xu 
Cc: "Michael S. Tsirkin" 
Cc: Jason Wang 
Cc: "David S. Miller" 
Cc: virtualization@lists.linux-foundation.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Longpeng(Mike) 
Link: https://lore.kernel.org/r/20200602070501.2023-4-longpeng2@huawei.com
Signed-off-by: Michael S. Tsirkin 
Signed-off-by: Greg Kroah-Hartman

crypto: remove CRYPTO_TFM_RES_BAD_KEY_LEN

2020-01-09T03:30:53+00:00

The CRYPTO_TFM_RES_BAD_KEY_LEN flag was apparently meant as a way to
make the ->setkey() functions provide more information about errors.

However, no one actually checks for this flag, which makes it pointless.

Also, many algorithms fail to set this flag when given a bad length key.
Reviewing just the generic implementations, this is the case for
aes-fixed-time, cbcmac, echainiv, nhpoly1305, pcrypt, rfc3686, rfc4309,
rfc7539, rfc7539esp, salsa20, seqiv, and xcbc.  But there are probably
many more in arch/*/crypto/ and drivers/crypto/.

Some algorithms can even set this flag when the key is the correct
length.  For example, authenc and authencesn set it when the key payload
is malformed in any way (not just a bad length), the atmel-sha and ccree
drivers can set it if a memory allocation fails, and the chelsio driver
sets it for bad auth tag lengths, not just bad key lengths.

So even if someone actually wanted to start checking this flag (which
seems unlikely, since it's been unused for a long time), there would be
a lot of work needed to get it working correctly.  But it would probably
be much better to go back to the drawing board and just define different
return values, like -EINVAL if the key is invalid for the algorithm vs.
-EKEYREJECTED if the key was rejected by a policy like "no weak keys".
That would be much simpler, less error-prone, and easier to test.

So just remove this flag.

Signed-off-by: Eric Biggers 
Reviewed-by: Horia Geantă 
Signed-off-by: Herbert Xu

crypto: virtio - switch to skcipher API

2019-11-17T01:02:45+00:00

Commit 7a7ffe65c8c5 ("crypto: skcipher - Add top-level skcipher interface")
dated 20 august 2015 introduced the new skcipher API which is supposed to
replace both blkcipher and ablkcipher. While all consumers of the API have
been converted long ago, some producers of the ablkcipher remain, forcing
us to keep the ablkcipher support routines alive, along with the matching
code to expose [a]blkciphers via the skcipher API.

So switch this driver to the skcipher API, allowing us to finally drop the
ablkcipher code in the near future.

Cc: "Michael S. Tsirkin" 
Cc: Jason Wang 
Cc: Gonglei 
Cc: virtualization@lists.linux-foundation.org
Signed-off-by: Ard Biesheuvel 
Signed-off-by: Herbert Xu

crypto: virtio - deal with unsupported input sizes

2019-11-17T01:02:45+00:00

Return -EINVAL for input sizes that are not a multiple of the AES
block size, since they are not supported by our CBC chaining mode.

While at it, remove the pr_err() that reports unsupported key sizes
being used: we shouldn't spam the kernel log with that.

Fixes: dbaf0624ffa5 ("crypto: add virtio-crypto driver")
Cc: "Michael S. Tsirkin" 
Cc: Jason Wang 
Cc: Gonglei 
Cc: virtualization@lists.linux-foundation.org
Signed-off-by: Ard Biesheuvel 
Signed-off-by: Herbert Xu

crypto: virtio - implement missing support for output IVs

2019-11-17T01:02:45+00:00

In order to allow for CBC to be chained, which is something that the
CTS template relies upon, implementations of CBC need to pass the
IV to be used for subsequent invocations via the IV buffer. This was
not implemented yet for virtio-crypto so implement it now.

Fixes: dbaf0624ffa5 ("crypto: add virtio-crypto driver")
Cc: "Michael S. Tsirkin" 
Cc: Jason Wang 
Cc: Gonglei 
Cc: virtualization@lists.linux-foundation.org
Signed-off-by: Ard Biesheuvel 
Signed-off-by: Herbert Xu

crypto: skcipher - rename the crypto_blkcipher module and kconfig option

2019-11-01T05:42:47+00:00

Now that the blkcipher algorithm type has been removed in favor of
skcipher, rename the crypto_blkcipher kernel module to crypto_skcipher,
and rename the config options accordingly:

	CONFIG_CRYPTO_BLKCIPHER => CONFIG_CRYPTO_SKCIPHER
	CONFIG_CRYPTO_BLKCIPHER2 => CONFIG_CRYPTO_SKCIPHER2

Signed-off-by: Eric Biggers 
Signed-off-by: Herbert Xu

crypto: drivers - Use kmemdup rather than duplicating its implementation

2019-07-26T05:03:59+00:00

kmemdup is introduced to duplicate a region of memory in a neat way.
Rather than kmalloc/kzalloc + memcpy, which the programmer needs to
write the size twice (sometimes lead to mistakes), kmemdup improves
readability, leads to smaller code and also reduce the chances of mistakes.
Suggestion to use kmemdup rather than using kmalloc/kzalloc + memcpy.

Signed-off-by: Fuqian Huang 
Reviewed-by: Horia Geantă 
Acked-by: Michael S. Tsirkin 
Signed-off-by: Herbert Xu

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 13

2019-05-21T09:28:45+00:00

Based on 2 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version this program is distributed in the
  hope that it will be useful but without any warranty without even
  the implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details you
  should have received a copy of the gnu general public license along
  with this program if not see http www gnu org licenses

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version this program is distributed in the
  hope that it will be useful but without any warranty without even
  the implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details [based]
  [from] [clk] [highbank] [c] you should have received a copy of the
  gnu general public license along with this program if not see http
  www gnu org licenses

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 355 file(s).

Signed-off-by: Thomas Gleixner 
Reviewed-by: Kate Stewart 
Reviewed-by: Jilayne Lovejoy 
Reviewed-by: Steve Winslow 
Reviewed-by: Allison Randal 
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190519154041.837383322@linutronix.de
Signed-off-by: Greg Kroah-Hartman