linux-stable.git/drivers/cpufreq, branch v6.10 Linux kernel stable tree cpufreq: ACPI: Mark boost policy as enabled when setting boost 2024-07-01T16:10:52+00:00 Mario Limonciello mario.limonciello@amd.com 2024-06-26T20:47:23+00:00 d92467ad9d9ee63a700934b9228a989ef671d511 When boost is set for CPUs using acpi-cpufreq, the policy is not updated which can cause boost to be incorrectly not reported. Fixes: 218a06a79d9a ("cpufreq: Support per-policy performance boost") Link: https://patch.msgid.link/20240626204723.6237-2-mario.limonciello@amd.com Suggested-by: Viresh Kumar <viresh.kumar@linaro.org> Suggested-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 
When boost is set for CPUs using acpi-cpufreq, the policy is not
updated which can cause boost to be incorrectly not reported.

Fixes: 218a06a79d9a ("cpufreq: Support per-policy performance boost")
Link: https://patch.msgid.link/20240626204723.6237-2-mario.limonciello@amd.com
Suggested-by: Viresh Kumar <viresh.kumar@linaro.org>
Suggested-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
cpufreq: Allow drivers to advertise boost enabled 2024-07-01T16:10:52+00:00 Mario Limonciello mario.limonciello@amd.com 2024-06-26T20:47:22+00:00 102fa9c4b439ca3bd93d13fb53f5b7592d96a109 The behavior introduced in commit f37a4d6b4a2c ("cpufreq: Fix per-policy boost behavior on SoCs using cpufreq_boost_set_sw()") sets up the boost policy incorrectly when boost has been enabled by the platform firmware initially even if a driver sets the policy up. This is because policy_has_boost_freq() assumes that there is a frequency table set up by the driver and that the boost frequencies are advertised in that table. This assumption doesn't work for acpi-cpufreq or amd-pstate. Only use this check to enable boost if it's not already enabled instead of also disabling it if alreayd enabled. Fixes: f37a4d6b4a2c ("cpufreq: Fix per-policy boost behavior on SoCs using cpufreq_boost_set_sw()") Link: https://patch.msgid.link/20240626204723.6237-1-mario.limonciello@amd.com Reviewed-by: Sibi Sankar <quic_sibis@quicinc.com> Reviewed-by: Dhruva Gole <d-gole@ti.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Suggested-by: Viresh Kumar <viresh.kumar@linaro.org> Suggested-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 
The behavior introduced in commit f37a4d6b4a2c ("cpufreq: Fix per-policy
boost behavior on SoCs using cpufreq_boost_set_sw()") sets up the boost
policy incorrectly when boost has been enabled by the platform firmware
initially even if a driver sets the policy up.

This is because policy_has_boost_freq() assumes that there is a frequency
table set up by the driver and that the boost frequencies are advertised
in that table. This assumption doesn't work for acpi-cpufreq or
amd-pstate. Only use this check to enable boost if it's not already
enabled instead of also disabling it if alreayd enabled.

Fixes: f37a4d6b4a2c ("cpufreq: Fix per-policy boost behavior on SoCs using cpufreq_boost_set_sw()")
Link: https://patch.msgid.link/20240626204723.6237-1-mario.limonciello@amd.com
Reviewed-by: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Suggested-by: Viresh Kumar <viresh.kumar@linaro.org>
Suggested-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
cpufreq: intel_pstate: Use HWP to initialize ITMT if CPPC is missing 2024-06-24T18:55:11+00:00 Rafael J. Wysocki rafael.j.wysocki@intel.com 2024-06-20T16:14:53+00:00 a1ff59784b277795a613beaa5d3dd9c5595c69a7 It is reported that single-thread performance on some hybrid systems dropped significantly after commit 7feec7430edd ("ACPI: CPPC: Only probe for _CPC if CPPC v2 is acked") which prevented _CPC from being used if the support for it had not been confirmed by the platform firmware. The problem is that if the platform firmware does not confirm CPPC v2 support, cppc_get_perf_caps() returns an error which prevents the intel_pstate driver from enabling ITMT. Consequently, the scheduler does not get any hints on CPU performance differences, so in a hybrid system some tasks may run on CPUs with lower capacity even though they should be running on high-capacity CPUs. To address this, modify intel_pstate to use the information from MSR_HWP_CAPABILITIES to enable ITMT if CPPC is not available (which is done already if the highest performance number coming from CPPC is not realistic). Fixes: 7feec7430edd ("ACPI: CPPC: Only probe for _CPC if CPPC v2 is acked") Closes: https://lore.kernel.org/linux-acpi/d01b0a1f-bd33-47fe-ab41-43843d8a374f@kfocus.org Link: https://lore.kernel.org/linux-acpi/ZnD22b3Br1ng7alf@kf-XE Reported-by: Aaron Rainbolt <arainbolt@kfocus.org> Tested-by: Aaron Rainbolt <arainbolt@kfocus.org> Cc: 5.19+ <stable@vger.kernel.org> # 5.19+ Link: https://patch.msgid.link/12460110.O9o76ZdvQC@rjwysocki.net Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> 
It is reported that single-thread performance on some hybrid systems
dropped significantly after commit 7feec7430edd ("ACPI: CPPC: Only probe
for _CPC if CPPC v2 is acked") which prevented _CPC from being used if
the support for it had not been confirmed by the platform firmware.

The problem is that if the platform firmware does not confirm CPPC v2
support, cppc_get_perf_caps() returns an error which prevents the
intel_pstate driver from enabling ITMT.  Consequently, the scheduler
does not get any hints on CPU performance differences, so in a hybrid
system some tasks may run on CPUs with lower capacity even though they
should be running on high-capacity CPUs.

To address this, modify intel_pstate to use the information from
MSR_HWP_CAPABILITIES to enable ITMT if CPPC is not available (which is
done already if the highest performance number coming from CPPC is not
realistic).

Fixes: 7feec7430edd ("ACPI: CPPC: Only probe for _CPC if CPPC v2 is acked")
Closes: https://lore.kernel.org/linux-acpi/d01b0a1f-bd33-47fe-ab41-43843d8a374f@kfocus.org
Link: https://lore.kernel.org/linux-acpi/ZnD22b3Br1ng7alf@kf-XE
Reported-by: Aaron Rainbolt <arainbolt@kfocus.org>
Tested-by: Aaron Rainbolt <arainbolt@kfocus.org>
Cc: 5.19+ <stable@vger.kernel.org> # 5.19+
Link: https://patch.msgid.link/12460110.O9o76ZdvQC@rjwysocki.net
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
cpufreq: intel_pstate: Check turbo_is_disabled() in store_no_turbo() 2024-06-12T12:11:50+00:00 Rafael J. Wysocki rafael.j.wysocki@intel.com 2024-06-11T14:53:06+00:00 350cbb5d2f676bff22c49e5e81764c3b8da342a9 After recent changes in intel_pstate, global.turbo_disabled is only set at the initialization time and never changed. However, it turns out that on some systems the "turbo disabled" bit in MSR_IA32_MISC_ENABLE, the initial state of which is reflected by global.turbo_disabled, can be flipped later and there should be a way to take that into account (other than checking that MSR every time the driver runs which is costly and useless overhead on the vast majority of systems). For this purpose, notice that before the changes in question, store_no_turbo() contained a turbo_is_disabled() check that was used for updating global.turbo_disabled if the "turbo disabled" bit in MSR_IA32_MISC_ENABLE had been flipped and that functionality can be restored. Then, users will be able to reset global.turbo_disabled by writing 0 to no_turbo which used to work before on systems with flipping "turbo disabled" bit. This guarantees the driver state to remain in sync, but READ_ONCE() annotations need to be added in two places where global.turbo_disabled is accessed locklessly, so modify the driver to make that happen. Fixes: 0940f1a8011f ("cpufreq: intel_pstate: Do not update global.turbo_disabled after initialization") Closes: https://lore.kernel.org/linux-pm/bf3ebf1571a4788e97daf861eb493c12d42639a3.camel@xry111.site Suggested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Reported-by: Xi Ruoyao <xry111@xry111.site> Tested-by: Xi Ruoyao <xry111@xry111.site> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 
After recent changes in intel_pstate, global.turbo_disabled is only set
at the initialization time and never changed.  However, it turns out
that on some systems the "turbo disabled" bit in MSR_IA32_MISC_ENABLE,
the initial state of which is reflected by global.turbo_disabled, can be
flipped later and there should be a way to take that into account (other
than checking that MSR every time the driver runs which is costly and
useless overhead on the vast majority of systems).

For this purpose, notice that before the changes in question,
store_no_turbo() contained a turbo_is_disabled() check that was used
for updating global.turbo_disabled if the "turbo disabled" bit in
MSR_IA32_MISC_ENABLE had been flipped and that functionality can be
restored.  Then, users will be able to reset global.turbo_disabled
by writing 0 to no_turbo which used to work before on systems with
flipping "turbo disabled" bit.

This guarantees the driver state to remain in sync, but READ_ONCE()
annotations need to be added in two places where global.turbo_disabled
is accessed locklessly, so modify the driver to make that happen.

Fixes: 0940f1a8011f ("cpufreq: intel_pstate: Do not update global.turbo_disabled after initialization")
Closes: https://lore.kernel.org/linux-pm/bf3ebf1571a4788e97daf861eb493c12d42639a3.camel@xry111.site
Suggested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reported-by: Xi Ruoyao <xry111@xry111.site>
Tested-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
cpufreq: intel_pstate: Fix unchecked HWP MSR access 2024-06-03T16:00:23+00:00 Srinivas Pandruvada srinivas.pandruvada@linux.intel.com 2024-05-31T23:00:04+00:00 1e24c31351787e24b7eebe84866bd55fd62a0aef Fix unchecked MSR access error for processors with no HWP support. On such processors, maximum frequency can be changed by the system firmware using ACPI event ACPI_PROCESSOR_NOTIFY_HIGEST_PERF_CHANGED. This results in accessing HWP MSR 0x771. Call Trace: <TASK> generic_exec_single+0x58/0x120 smp_call_function_single+0xbf/0x110 rdmsrl_on_cpu+0x46/0x60 intel_pstate_get_hwp_cap+0x1b/0x70 intel_pstate_update_limits+0x2a/0x60 acpi_processor_notify+0xb7/0x140 acpi_ev_notify_dispatch+0x3b/0x60 HWP MSR 0x771 can be only read on a CPU which supports HWP and enabled. Hence intel_pstate_get_hwp_cap() can only be called when hwp_active is true. Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Closes: https://lore.kernel.org/linux-pm/20240529155740.Hq2Hw7be@linutronix.de/ Fixes: e8217b4bece3 ("cpufreq: intel_pstate: Update the maximum CPU frequency consistently") Tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 
Fix unchecked MSR access error for processors with no HWP support. On
such processors, maximum frequency can be changed by the system firmware
using ACPI event ACPI_PROCESSOR_NOTIFY_HIGEST_PERF_CHANGED. This results
in accessing HWP MSR 0x771.

Call Trace:
	<TASK>
	generic_exec_single+0x58/0x120
	smp_call_function_single+0xbf/0x110
	rdmsrl_on_cpu+0x46/0x60
	intel_pstate_get_hwp_cap+0x1b/0x70
	intel_pstate_update_limits+0x2a/0x60
	acpi_processor_notify+0xb7/0x140
	acpi_ev_notify_dispatch+0x3b/0x60

HWP MSR 0x771 can be only read on a CPU which supports HWP and enabled.
Hence intel_pstate_get_hwp_cap() can only be called when hwp_active is
true.

Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Closes: https://lore.kernel.org/linux-pm/20240529155740.Hq2Hw7be@linutronix.de/
Fixes: e8217b4bece3 ("cpufreq: intel_pstate: Update the maximum CPU frequency consistently")
Tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
cpufreq: amd-pstate: Fix the inconsistency in max frequency units 2024-05-28T20:03:11+00:00 Dhananjay Ugwekar Dhananjay.Ugwekar@amd.com 2024-05-27T05:11:28+00:00 e4731baaf29438508197d3a8a6d4f5a8c51663f8 The nominal frequency in cpudata is maintained in MHz whereas all other frequencies are in KHz. This means we have to convert nominal frequency value to KHz before we do any interaction with other frequency values. In amd_pstate_set_boost(), this conversion from MHz to KHz is missed, fix that. Tested on a AMD Zen4 EPYC server Before: $ cat /sys/devices/system/cpu/cpufreq/policy*/scaling_max_freq | uniq 2151 $ cat /sys/devices/system/cpu/cpufreq/policy*/cpuinfo_min_freq | uniq 400000 $ cat /sys/devices/system/cpu/cpufreq/policy*/scaling_cur_freq | uniq 2151 409422 After: $ cat /sys/devices/system/cpu/cpufreq/policy*/scaling_max_freq | uniq 2151000 $ cat /sys/devices/system/cpu/cpufreq/policy*/cpuinfo_min_freq | uniq 400000 $ cat /sys/devices/system/cpu/cpufreq/policy*/scaling_cur_freq | uniq 2151000 1799527 Fixes: ec437d71db77 ("cpufreq: amd-pstate: Introduce a new AMD P-State driver to support future processors") Signed-off-by: Dhananjay Ugwekar <Dhananjay.Ugwekar@amd.com> Acked-by: Mario Limonciello <mario.limonciello@amd.com> Acked-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Tested-by: Peter Jung <ptr1337@cachyos.org> Cc: 5.17+ <stable@vger.kernel.org> # 5.17+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 
The nominal frequency in cpudata is maintained in MHz whereas all other
frequencies are in KHz. This means we have to convert nominal frequency
value to KHz before we do any interaction with other frequency values.

In amd_pstate_set_boost(), this conversion from MHz to KHz is missed,
fix that.

Tested on a AMD Zen4 EPYC server

Before:
$ cat /sys/devices/system/cpu/cpufreq/policy*/scaling_max_freq | uniq
2151
$ cat /sys/devices/system/cpu/cpufreq/policy*/cpuinfo_min_freq | uniq
400000
$ cat /sys/devices/system/cpu/cpufreq/policy*/scaling_cur_freq | uniq
2151
409422

After:
$ cat /sys/devices/system/cpu/cpufreq/policy*/scaling_max_freq | uniq
2151000
$ cat /sys/devices/system/cpu/cpufreq/policy*/cpuinfo_min_freq | uniq
400000
$ cat /sys/devices/system/cpu/cpufreq/policy*/scaling_cur_freq | uniq
2151000
1799527

Fixes: ec437d71db77 ("cpufreq: amd-pstate: Introduce a new AMD P-State driver to support future processors")
Signed-off-by: Dhananjay Ugwekar <Dhananjay.Ugwekar@amd.com>
Acked-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Tested-by: Peter Jung <ptr1337@cachyos.org>
Cc: 5.17+ <stable@vger.kernel.org> # 5.17+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
cpufreq: amd-pstate: remove global header file 2024-05-28T19:59:39+00:00 Arnd Bergmann arnd@arndb.de 2024-05-28T12:09:23+00:00 779b8a14afde110dd3502566be907289eba72447 When extra warnings are enabled, gcc points out a global variable definition in a header: In file included from drivers/cpufreq/amd-pstate-ut.c:29: include/linux/amd-pstate.h:123:27: error: 'amd_pstate_mode_string' defined but not used [-Werror=unused-const-variable=] 123 | static const char * const amd_pstate_mode_string[] = { | ^~~~~~~~~~~~~~~~~~~~~~ This header is only included from two files in the same directory, and one of them uses only a single definition from it, so clean it up by moving most of the contents into the driver that uses them, and making shared bits a local header file. Fixes: 36c5014e5460 ("cpufreq: amd-pstate: optimize driver working mode selection in amd_pstate_param()") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 
When extra warnings are enabled, gcc points out a global variable
definition in a header:

In file included from drivers/cpufreq/amd-pstate-ut.c:29:
include/linux/amd-pstate.h:123:27: error: 'amd_pstate_mode_string' defined but not used [-Werror=unused-const-variable=]
  123 | static const char * const amd_pstate_mode_string[] = {
      |                           ^~~~~~~~~~~~~~~~~~~~~~

This header is only included from two files in the same directory,
and one of them uses only a single definition from it, so clean it
up by moving most of the contents into the driver that uses them,
and making shared bits a local header file.

Fixes: 36c5014e5460 ("cpufreq: amd-pstate: optimize driver working mode selection in amd_pstate_param()")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Merge tag 'pm-6.10-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm 2024-05-21T18:40:49+00:00 Linus Torvalds torvalds@linux-foundation.org 2024-05-21T18:40:49+00:00 98f312bc58156a5922b5a496119e3a42b0ad439a Pull power management fixes from Rafael Wysocki: "These fix the amd-pstate driver and the operating performance point (OPP) handling related to generic PM domains. Specifics: - Fix a memory leak in the exit path of amd-pstate (Peng Ma) - Fix required_opp_tables handling in the cases when multiple generic PM domains share one OPP table (Viresh Kumar)" * tag 'pm-6.10-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: OPP: Fix required_opp_tables for multiple genpds using same table cpufreq: amd-pstate: fix memory leak on CPU EPP exit 
Pull power management fixes from Rafael Wysocki:
 "These fix the amd-pstate driver and the operating performance point
  (OPP) handling related to generic PM domains.

  Specifics:

   - Fix a memory leak in the exit path of amd-pstate (Peng Ma)

   - Fix required_opp_tables handling in the cases when multiple generic
     PM domains share one OPP table (Viresh Kumar)"

* tag 'pm-6.10-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  OPP: Fix required_opp_tables for multiple genpds using same table
  cpufreq: amd-pstate: fix memory leak on CPU EPP exit
Merge tag 'powerpc-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux 2024-05-17T16:05:46+00:00 Linus Torvalds torvalds@linux-foundation.org 2024-05-17T16:05:46+00:00 ff2632d7d08edc11e8bd0629e9fcfebab25c78b4 Pull powerpc updates from Michael Ellerman: - Enable BPF Kernel Functions (kfuncs) in the powerpc BPF JIT. - Allow per-process DEXCR (Dynamic Execution Control Register) settings via prctl, notably NPHIE which controls hashst/hashchk for ROP protection. - Install powerpc selftests in sub-directories. Note this changes the way run_kselftest.sh needs to be invoked for powerpc selftests. - Change fadump (Firmware Assisted Dump) to better handle memory add/remove. - Add support for passing additional parameters to the fadump kernel. - Add support for updating the kdump image on CPU/memory add/remove events. - Other small features, cleanups and fixes. Thanks to Andrew Donnellan, Andy Shevchenko, Aneesh Kumar K.V, Arnd Bergmann, Benjamin Gray, Bjorn Helgaas, Christian Zigotzky, Christophe Jaillet, Christophe Leroy, Colin Ian King, Cédric Le Goater, Dr. David Alan Gilbert, Erhard Furtner, Frank Li, GUO Zihua, Ganesh Goudar, Geoff Levand, Ghanshyam Agrawal, Greg Kurz, Hari Bathini, Joel Stanley, Justin Stitt, Kunwu Chan, Li Yang, Lidong Zhong, Madhavan Srinivasan, Mahesh Salgaonkar, Masahiro Yamada, Matthias Schiffer, Naresh Kamboju, Nathan Chancellor, Nathan Lynch, Naveen N Rao, Nicholas Miehlbradt, Ran Wang, Randy Dunlap, Ritesh Harjani, Sachin Sant, Shirisha Ganta, Shrikanth Hegde, Sourabh Jain, Stephen Rothwell, sundar, Thorsten Blum, Vaibhav Jain, Xiaowei Bao, Yang Li, and Zhao Chenhui. * tag 'powerpc-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (85 commits) powerpc/fadump: Fix section mismatch warning powerpc/85xx: fix compile error without CONFIG_CRASH_DUMP powerpc/fadump: update documentation about bootargs_append powerpc/fadump: pass additional parameters when fadump is active powerpc/fadump: setup additional parameters for dump capture kernel powerpc/pseries/fadump: add support for multiple boot memory regions selftests/powerpc/dexcr: Fix spelling mistake "predicition" -> "prediction" KVM: PPC: Book3S HV nestedv2: Fix an error handling path in gs_msg_ops_kvmhv_nestedv2_config_fill_info() KVM: PPC: Fix documentation for ppc mmu caps KVM: PPC: code cleanup for kvmppc_book3s_irqprio_deliver KVM: PPC: Book3S HV nestedv2: Cancel pending DEC exception powerpc/xmon: Check cpu id in commands "c#", "dp#" and "dx#" powerpc/code-patching: Use dedicated memory routines for patching powerpc/code-patching: Test patch_instructions() during boot powerpc64/kasan: Pass virtual addresses to kasan_init_phys_region() powerpc: rename SPRN_HID2 define to SPRN_HID2_750FX powerpc: Fix typos powerpc/eeh: Fix spelling of the word "auxillary" and update comment macintosh/ams: Fix unused variable warning powerpc/Makefile: Remove bits related to the previous use of -mcmodel=large ... 
Pull powerpc updates from Michael Ellerman:

 - Enable BPF Kernel Functions (kfuncs) in the powerpc BPF JIT.

 - Allow per-process DEXCR (Dynamic Execution Control Register) settings
   via prctl, notably NPHIE which controls hashst/hashchk for ROP
   protection.

 - Install powerpc selftests in sub-directories. Note this changes the
   way run_kselftest.sh needs to be invoked for powerpc selftests.

 - Change fadump (Firmware Assisted Dump) to better handle memory
   add/remove.

 - Add support for passing additional parameters to the fadump kernel.

 - Add support for updating the kdump image on CPU/memory add/remove
   events.

 - Other small features, cleanups and fixes.

Thanks to Andrew Donnellan, Andy Shevchenko, Aneesh Kumar K.V, Arnd
Bergmann, Benjamin Gray, Bjorn Helgaas, Christian Zigotzky, Christophe
Jaillet, Christophe Leroy, Colin Ian King, Cédric Le Goater, Dr. David
Alan Gilbert, Erhard Furtner, Frank Li, GUO Zihua, Ganesh Goudar, Geoff
Levand, Ghanshyam Agrawal, Greg Kurz, Hari Bathini, Joel Stanley, Justin
Stitt, Kunwu Chan, Li Yang, Lidong Zhong, Madhavan Srinivasan, Mahesh
Salgaonkar, Masahiro Yamada, Matthias Schiffer, Naresh Kamboju, Nathan
Chancellor, Nathan Lynch, Naveen N Rao, Nicholas Miehlbradt, Ran Wang,
Randy Dunlap, Ritesh Harjani, Sachin Sant, Shirisha Ganta, Shrikanth
Hegde, Sourabh Jain, Stephen Rothwell, sundar, Thorsten Blum, Vaibhav
Jain, Xiaowei Bao, Yang Li, and Zhao Chenhui.

* tag 'powerpc-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (85 commits)
  powerpc/fadump: Fix section mismatch warning
  powerpc/85xx: fix compile error without CONFIG_CRASH_DUMP
  powerpc/fadump: update documentation about bootargs_append
  powerpc/fadump: pass additional parameters when fadump is active
  powerpc/fadump: setup additional parameters for dump capture kernel
  powerpc/pseries/fadump: add support for multiple boot memory regions
  selftests/powerpc/dexcr: Fix spelling mistake "predicition" -> "prediction"
  KVM: PPC: Book3S HV nestedv2: Fix an error handling path in gs_msg_ops_kvmhv_nestedv2_config_fill_info()
  KVM: PPC: Fix documentation for ppc mmu caps
  KVM: PPC: code cleanup for kvmppc_book3s_irqprio_deliver
  KVM: PPC: Book3S HV nestedv2: Cancel pending DEC exception
  powerpc/xmon: Check cpu id in commands "c#", "dp#" and "dx#"
  powerpc/code-patching: Use dedicated memory routines for patching
  powerpc/code-patching: Test patch_instructions() during boot
  powerpc64/kasan: Pass virtual addresses to kasan_init_phys_region()
  powerpc: rename SPRN_HID2 define to SPRN_HID2_750FX
  powerpc: Fix typos
  powerpc/eeh: Fix spelling of the word "auxillary" and update comment
  macintosh/ams: Fix unused variable warning
  powerpc/Makefile: Remove bits related to the previous use of -mcmodel=large
  ...
cpufreq: amd-pstate: fix memory leak on CPU EPP exit 2024-05-16T08:38:07+00:00 Peng Ma andypma@tencent.com 2024-05-16T06:30:42+00:00 cea04f3d9aeebda9d9c063c0dfa71e739c322c81 The cpudata memory from kzalloc() in amd_pstate_epp_cpu_init() is not freed in the analogous exit function, so fix that. Signed-off-by: Peng Ma <andypma@tencent.com> Acked-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Perry Yuan <Perry.Yuan@amd.com> [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 
The cpudata memory from kzalloc() in amd_pstate_epp_cpu_init() is
not freed in the analogous exit function, so fix that.

Signed-off-by: Peng Ma <andypma@tencent.com>
Acked-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Perry Yuan <Perry.Yuan@amd.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>