commit 9505b98ccddc454008ca7efff90044e3e857c827 upstream.

pxa_cpufreq_init_voltages() is marked __init but usually inlined into
the non-__init pxa_cpufreq_init() function. When building with clang,
it can stay as a standalone function in a discarded section, and produce
this warning:

WARNING: vmlinux.o(.text+0x616a00): Section mismatch in reference from the function pxa_cpufreq_init() to the function .init.text:pxa_cpufreq_init_voltages()
The function pxa_cpufreq_init() references
the function __init pxa_cpufreq_init_voltages().
This is often because pxa_cpufreq_init lacks a __init
annotation or the annotation of pxa_cpufreq_init_voltages is wrong.

Fixes: 50e77fcd790e ("ARM: pxa: remove __init from cpufreq_driver->init()")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 446fae2bb5395f3028d8e3aae1508737e5a72ea1 upstream.

of_cpu_device_node_get() will increase the refcount of device_node,
it is necessary to call of_node_put() at the end to release the
refcount.

Fixes: 9eb15dbbfa1a2 ("cpufreq: Add cpufreq driver for Tegra124")
Cc: <stable@vger.kernel.org> # 4.4+
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 0334906c06967142c8805fbe88acf787f65d3d26 upstream.

Commit 5ad7346b4ae2 ("cpufreq: kryo: Add module remove and exit") made
it possible to build the kryo cpufreq driver as a module, but it failed
to release all the resources, i.e. OPP tables, when the module is
unloaded.

This patch fixes it by releasing the OPP tables, by calling
dev_pm_opp_put_supported_hw() for them, from the
qcom_cpufreq_kryo_remove() routine. The array of pointers to the OPP
tables is also allocated dynamically now in qcom_cpufreq_kryo_probe(),
as the pointers will be required while releasing the resources.

Compile tested only.

Cc: 4.18+ <stable@vger.kernel.org> # v4.18+
Fixes: 5ad7346b4ae2 ("cpufreq: kryo: Add module remove and exit")
Reviewed-by: Georgi Djakov <georgi.djakov@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 625c85a62cb7d3c79f6e16de3cfa972033658250 upstream.

The cpufreq_global_kobject is created using kobject_create_and_add()
helper, which assigns the kobj_type as dynamic_kobj_ktype and show/store
routines are set to kobj_attr_show() and kobj_attr_store().

These routines pass struct kobj_attribute as an argument to the
show/store callbacks. But all the cpufreq files created using the
cpufreq_global_kobject expect the argument to be of type struct
attribute. Things work fine currently as no one accesses the "attr"
argument. We may not see issues even if the argument is used, as struct
kobj_attribute has struct attribute as its first element and so they
will both get same address.

But this is logically incorrect and we should rather use struct
kobj_attribute instead of struct global_attr in the cpufreq core and
drivers and the show/store callbacks should take struct kobj_attribute
as argument instead.

This bug is caught using CFI CLANG builds in android kernel which
catches mismatch in function prototypes for such callbacks.

Reported-by: Donghee Han <dh.han@samsung.com>
Reported-by: Sangkyu Kim <skwith.kim@samsung.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This issue was detected with the help of Coccinelle. So
change the order of function calls to fix it.

Fixes: 1690d8bb91e37 (cpufreq: scpi/scmi: Fix freeing of dynamic OPPs)

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Cc: 4.20+ <stable@vger.kernel.org> # 4.20+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

* pm-cpuidle:
  doc: trace: fix reference to cpuidle documentation file
  cpuidle / Documentation: Update cpuidle MAINTAINERS entry

* pm-cpufreq:
  cpufreq: scmi: Fix frequency invariance in slow path
  cpufreq: check if policy is inactive early in __cpufreq_get()
  cpufreq: scpi/scmi: Fix freeing of dynamic OPPs
  cpufreq / Documentation: Update cpufreq MAINTAINERS entry

* pm-sleep:
  PM: sleep: call devfreq suspend/resume

The scmi-cpufreq driver calls the arch_set_freq_scale() callback on
frequency changes to provide scale-invariant load-tracking signals to
the scheduler. However, in the slow path, it does so while specifying
the current and max frequencies in different units, hence resulting in a
broken freq_scale factor.

Fix this by passing all frequencies in KHz, as stored in the CPUFreq
frequency table.

Fixes: 99d6bdf33877 (cpufreq: add support for CPU DVFS based on SCMI message protocol)
Signed-off-by: Quentin Perret <quentin.perret@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Cc: 4.17+ <stable@vger.kernel.org> # v4.17+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

cpuinfo_cur_freq gets current CPU frequency as detected by hardware
while scaling_cur_freq last known CPU frequency. Some platforms may not
allow checking the CPU frequency of an offline CPU or the associated
resources may have been released via cpufreq_exit when the CPU gets
offlined, in which case the policy would have been invalidated already.
If we attempt to get current frequency from the hardware, it may result
in hang or crash.

For example on Juno, I see:

Unable to handle kernel NULL pointer dereference at virtual address 0000000000000188
[0000000000000188] pgd=0000000000000000
Internal error: Oops: 96000004 [#1] PREEMPT SMP
Modules linked in:
CPU: 5 PID: 4202 Comm: cat Not tainted 4.20.0-08251-ga0f2c0318a15-dirty #87
Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development Platform
pstate: 40000005 (nZcv daif -PAN -UAO)
pc : scmi_cpufreq_get_rate+0x34/0xb0
lr : scmi_cpufreq_get_rate+0x34/0xb0
Call trace:
 scmi_cpufreq_get_rate+0x34/0xb0
 __cpufreq_get+0x34/0xc0
 show_cpuinfo_cur_freq+0x24/0x78
 show+0x40/0x60
 sysfs_kf_seq_show+0xc0/0x148
 kernfs_seq_show+0x44/0x50
 seq_read+0xd4/0x480
 kernfs_fop_read+0x15c/0x208
 __vfs_read+0x60/0x188
 vfs_read+0x94/0x150
 ksys_read+0x6c/0xd8
 __arm64_sys_read+0x24/0x30
 el0_svc_common+0x78/0x100
 el0_svc_handler+0x38/0x78
 el0_svc+0x8/0xc
---[ end trace 3d1024e58f77f6b2 ]---

So fix the issue by checking if the policy is invalid early in
__cpufreq_get before attempting to get the current frequency.

Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Since the commit 2a4eb7358aba "OPP: Don't remove dynamic OPPs from
_dev_pm_opp_remove_table()", dynamically created OPP aren't
automatically removed anymore by dev_pm_opp_cpumask_remove_table(). This
affects the scpi and scmi cpufreq drivers which no longer free OPPs on
failures or on invocations of the policy->exit() callback.

Create a generic OPP helper dev_pm_opp_remove_all_dynamic() which can be
called from these drivers instead of dev_pm_opp_cpumask_remove_table().

In dev_pm_opp_remove_all_dynamic(), we need to make sure that the
opp_list isn't getting accessed simultaneously from other parts of the
OPP core while the helper is freeing dynamic OPPs, i.e. we can't drop
the opp_table->lock while traversing through the OPP list. And to
accomplish that, this patch also creates _opp_kref_release_unlocked()
which can be called from this new helper with the opp_table lock already
held.

Cc: 4.20 <stable@vger.kernel.org> # v4.20
Reported-by: Valentin Schneider <valentin.schneider@arm.com>
Fixes: 2a4eb7358aba "OPP: Don't remove dynamic OPPs from _dev_pm_opp_remove_table()"
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Valentin Schneider <valentin.schneider@arm.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Pull powerpc updates from Michael Ellerman:
 "Notable changes:

   - Mitigations for Spectre v2 on some Freescale (NXP) CPUs.

   - A large series adding support for pass-through of Nvidia V100 GPUs
     to guests on Power9.

   - Another large series to enable hardware assistance for TLB table
     walk on MPC8xx CPUs.

   - Some preparatory changes to our DMA code, to make way for further
     cleanups from Christoph.

   - Several fixes for our Transactional Memory handling discovered by
     fuzzing the signal return path.

   - Support for generating our system call table(s) from a text file
     like other architectures.

   - A fix to our page fault handler so that instead of generating a
     WARN_ON_ONCE, user accesses of kernel addresses instead print a
     ratelimited and appropriately scary warning.

   - A cosmetic change to make our unhandled page fault messages more
     similar to other arches and also more compact and informative.

   - Freescale updates from Scott:
       "Highlights include elimination of legacy clock bindings use from
        dts files, an 83xx watchdog handler, fixes to old dts interrupt
        errors, and some minor cleanup."

  And many clean-ups, reworks and minor fixes etc.

  Thanks to: Alexandre Belloni, Alexey Kardashevskiy, Andrew Donnellan,
  Aneesh Kumar K.V, Arnd Bergmann, Benjamin Herrenschmidt, Breno Leitao,
  Christian Lamparter, Christophe Leroy, Christoph Hellwig, Daniel
  Axtens, Darren Stevens, David Gibson, Diana Craciun, Dmitry V. Levin,
  Firoz Khan, Geert Uytterhoeven, Greg Kurz, Gustavo Romero, Hari
  Bathini, Joel Stanley, Kees Cook, Madhavan Srinivasan, Mahesh
  Salgaonkar, Markus Elfring, Mathieu Malaterre, Michal Suchánek, Naveen
  N. Rao, Nick Desaulniers, Oliver O'Halloran, Paul Mackerras, Ram Pai,
  Ravi Bangoria, Rob Herring, Russell Currey, Sabyasachi Gupta, Sam
  Bobroff, Satheesh Rajendran, Scott Wood, Segher Boessenkool, Stephen
  Rothwell, Tang Yuantian, Thiago Jung Bauermann, Yangtao Li, Yuantian
  Tang, Yue Haibing"

* tag 'powerpc-4.21-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (201 commits)
  Revert "powerpc/fsl_pci: simplify fsl_pci_dma_set_mask"
  powerpc/zImage: Also check for stdout-path
  powerpc: Fix HMIs on big-endian with CONFIG_RELOCATABLE=y
  macintosh: Use of_node_name_{eq, prefix} for node name comparisons
  ide: Use of_node_name_eq for node name comparisons
  powerpc: Use of_node_name_eq for node name comparisons
  powerpc/pseries/pmem: Convert to %pOFn instead of device_node.name
  powerpc/mm: Remove very old comment in hash-4k.h
  powerpc/pseries: Fix node leak in update_lmb_associativity_index()
  powerpc/configs/85xx: Enable CONFIG_DEBUG_KERNEL
  powerpc/dts/fsl: Fix dtc-flagged interrupt errors
  clk: qoriq: add more compatibles strings
  powerpc/fsl: Use new clockgen binding
  powerpc/83xx: handle machine check caused by watchdog timer
  powerpc/fsl-rio: fix spelling mistake "reserverd" -> "reserved"
  powerpc/fsl_pci: simplify fsl_pci_dma_set_mask
  arch/powerpc/fsl_rmu: Use dma_zalloc_coherent
  vfio_pci: Add NVIDIA GV100GL [Tesla V100 SXM2] subdriver
  vfio_pci: Allow regions to add own capabilities
  vfio_pci: Allow mapping extra regions
  ...