linux-stable.git/drivers/cpufreq, branch v4.9.91

cpufreq/sh: Replace racy task affinity logic

2018-03-24T10:00:10+00:00

[ Upstream commit 205dcc1ecbc566cbc20acf246e68de3b080b3ecf ]

The target() callback must run on the affected cpu. This is achieved by
temporarily setting the affinity of the calling thread to the requested CPU
and reset it to the original affinity afterwards.

That's racy vs. concurrent affinity settings for that thread resulting in
code executing on the wrong CPU.

Replace it by work_on_cpu(). All call pathes which invoke the callbacks are
already protected against CPU hotplug.

Signed-off-by: Thomas Gleixner 
Acked-by: Viresh Kumar 
Cc: Fenghua Yu 
Cc: Tony Luck 
Cc: Herbert Xu 
Cc: "Rafael J. Wysocki" 
Cc: Peter Zijlstra 
Cc: Benjamin Herrenschmidt 
Cc: Sebastian Siewior 
Cc: linux-pm@vger.kernel.org
Cc: Lai Jiangshan 
Cc: Michael Ellerman 
Cc: Tejun Heo 
Cc: "David S. Miller" 
Cc: Len Brown 
Link: http://lkml.kernel.org/r/20170412201042.958216363@linutronix.de
Signed-off-by: Thomas Gleixner 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

cpufreq: s3c24xx: Fix broken s3c_cpufreq_init()

2018-03-11T15:21:28+00:00

commit 0373ca74831b0f93cd4cdbf7ad3aec3c33a479a5 upstream.

commit a307a1e6bc0d "cpufreq: s3c: use cpufreq_generic_init()"
accidentally broke cpufreq on s3c2410 and s3c2412.

These two platforms don't have a CPU frequency table and used to skip
calling cpufreq_table_validate_and_show() for them.  But with the
above commit, we started calling it unconditionally and that will
eventually fail as the frequency table pointer is NULL.

Fix this by calling cpufreq_table_validate_and_show() conditionally
again.

Fixes: a307a1e6bc0d "cpufreq: s3c: use cpufreq_generic_init()"
Cc: 3.13+  # v3.13+
Signed-off-by: Viresh Kumar 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Greg Kroah-Hartman

x86/cpu: Rename cpu_data.x86_mask to cpu_data.x86_stepping

2018-02-22T14:43:55+00:00

commit b399151cb48db30ad1e0e93dd40d68c6d007b637 upstream.

x86_mask is a confusing name which is hard to associate with the
processor's stepping.

Additionally, correct an indent issue in lib/cpu.c.

Signed-off-by: Jia Zhang 
[ Updated it to more recent kernels. ]
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Cc: bp@alien8.de
Cc: tony.luck@intel.com
Link: http://lkml.kernel.org/r/1514771530-70829-1-git-send-email-qianyue.zj@alibaba-inc.com
Signed-off-by: Ingo Molnar 
Signed-off-by: Greg Kroah-Hartman

cpufreq: powernv: Dont assume distinct pstate values for nominal and pmin

2018-02-22T14:43:52+00:00

commit 3fa4680b860bf48b437d6a2c039789c4abe202ae upstream.

Some OpenPOWER boxes can have same pstate values for nominal and
pmin pstates. In these boxes the current code will not initialize
'powernv_pstate_info.min' variable and result in erroneous CPU
frequency reporting. This patch fixes this problem.

Fixes: 09ca4c9b5958 (cpufreq: powernv: Replacing pstate_id with frequency table index)
Reported-by: Alvin Wang 
Signed-off-by: Shilpasri G Bhat 
Acked-by: Viresh Kumar 
Cc: 4.8+  # 4.8+
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Greg Kroah-Hartman

cpufreq: Add Loongson machine dependencies

2018-02-03T16:05:36+00:00

[ Upstream commit 0d307935fefa6389eb726c6362351c162c949101 ]

The MIPS loongson cpufreq drivers don't build unless configured for the
correct machine type, due to dependency on machine specific architecture
headers and symbols in machine specific platform code.

More specifically loongson1-cpufreq.c uses RST_CPU_EN and RST_CPU,
neither of which is defined in asm/mach-loongson32/regs-clk.h unless
CONFIG_LOONGSON1_LS1B=y, and loongson2_cpufreq.c references
loongson2_clockmod_table[], which is only defined in
arch/mips/loongson64/lemote-2f/clock.c, i.e. when
CONFIG_LEMOTE_MACH2F=y.

Add these dependencies to Kconfig to avoid randconfig / allyesconfig
build failures (e.g. when based on BMIPS which also has a cpufreq
driver).

Signed-off-by: James Hogan 
Acked-by: Viresh Kumar 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

cpufreq: Fix creation of symbolic links to policy directories

2017-12-25T13:23:42+00:00

[ Upstream commit 2f0ba790df51721794c11abc7a076d407392f648 ]

The cpufreq core only tries to create symbolic links from CPU
directories in sysfs to policy directories in cpufreq_add_dev(),
either when a given CPU is registered or when the cpufreq driver
is registered, whichever happens first.  That is not sufficient,
however, because cpufreq_add_dev() may be called for an offline CPU
whose policy object has not been created yet and, quite obviously,
the symbolic cannot be added in that case.

Fix that by making cpufreq_online() attempt to add symbolic links to
policy objects for the CPUs in the related_cpus mask of every new
policy object created by it.

The cpufreq_driver_lock locking around the for_each_cpu() loop
in cpufreq_online() is dropped, because it is not necessary and the
code is somewhat simpler without it.  Moreover, failures to create
a symbolic link will not be regarded as hard errors any more and
the CPUs without those links will not be taken offline automatically,
but that should not be problematic in practice.

Reported-and-tested-by: Prashanth Prakash 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

cpufreq: Do not clear real_cpus mask on policy init

2017-11-08T09:08:33+00:00

[ Upstream commit f451014692ae34e587b00de6745e16661cf734d8 ]

If new_policy is set in cpufreq_online(), the policy object has just
been created and its real_cpus mask has been zeroed on allocation,
and the driver's ->init() callback should not touch it.

It doesn't need to be cleared again, so don't do that.

Signed-off-by: Rafael J. Wysocki 
Acked-by: Viresh Kumar 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

cpufreq: CPPC: add ACPI_PROCESSOR dependency

2017-10-21T15:21:38+00:00

[ Upstream commit a578884fa0d2768f13d37c6591a9e1ed600482d3 ]

Without the Kconfig dependency, we can get this warning:

warning: ACPI_CPPC_CPUFREQ selects ACPI_CPPC_LIB which has unmet direct dependencies (ACPI && ACPI_PROCESSOR)

Fixes: 5477fb3bd1e8 (ACPI / CPPC: Add a CPUFreq driver for use with CPPC)
Signed-off-by: Arnd Bergmann 
Acked-by: Viresh Kumar 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

cpufreq: intel_pstate: Update pid_params.sample_rate_ns in pid_param_set()

2017-10-08T08:26:10+00:00

[ Upstream commit 6e7408acd04d06c04981c0c0fb5a2462b16fae4f ]

Fix the debugfs interface for PID tuning to actually update
pid_params.sample_rate_ns on PID parameters updates, as changing
pid_params.sample_rate_ms via debugfs has no effect now.

Fixes: a4675fbc4a7a (cpufreq: intel_pstate: Replace timers with utilization update callbacks)
Signed-off-by: Rafael J. Wysocki 
Acked-by: Viresh Kumar 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

cpufreq: s3c2416: double free on driver init error path

2017-07-05T12:40:30+00:00

commit a69261e4470d680185a15f748d9cdafb37c57a33 upstream.

The "goto err_armclk;" error path already does a clk_put(s3c_freq->hclk);
so this is a double free.

Fixes: 34ee55075265 ([CPUFREQ] Add S3C2416/S3C2450 cpufreq driver)
Signed-off-by: Dan Carpenter 
Reviewed-by: Krzysztof Kozlowski 
Acked-by: Viresh Kumar 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Greg Kroah-Hartman