linux-stable.git/drivers/cpufreq, branch v4.19.321

cpufreq: imx6q: Don't disable 792 Mhz OPP unnecessarily

2023-12-08T07:43:26+00:00

[ Upstream commit 2e4e0984c7d696cc74cf2fd7e7f62997f0e9ebe6 ]

For a 900MHz i.MX6ULL CPU the 792MHz OPP is disabled. There is no
convincing reason to disable this OPP. If a CPU can run at 900MHz,
it should also be able to cope with 792MHz. Looking at the voltage
level of 792MHz in [1] (page 24, table 10. "Operating Ranges") the
current defined OPP is above the minimum. So the voltage level
shouldn't be a problem. However in [2] (page 24, table 10.
"Operating Ranges"), it is not mentioned that 792MHz OPP isn't
allowed. Change it to only disable 792MHz OPP for i.MX6ULL types
below 792 MHz.

[1] https://www.nxp.com/docs/en/data-sheet/IMX6ULLIEC.pdf
[2] https://www.nxp.com/docs/en/data-sheet/IMX6ULLCEC.pdf

Fixes: 0aa9abd4c212 ("cpufreq: imx6q: check speed grades for i.MX6ULL")
Signed-off-by: Christoph Niedermaier 
Reviewed-by: Marek Vasut 
Reviewed-by: Fabio Estevam 
[ Viresh: Edited subject ]
Signed-off-by: Viresh Kumar 
Signed-off-by: Sasha Levin

cpufreq: imx6q: don't warn for disabling a non-existing frequency

2023-12-08T07:43:26+00:00

[ Upstream commit 11a3b0ac33d95aa84be426e801f800997262a225 ]

It is confusing if a warning is given for disabling a non-existent
frequency of the operating performance points (OPP). In this case
the function dev_pm_opp_disable() returns -ENODEV. Check the return
value and avoid the output of a warning in this case. Avoid code
duplication by using a separate function.

Signed-off-by: Christoph Niedermaier 
[ Viresh : Updated commit subject ]
Signed-off-by: Viresh Kumar 
Stable-dep-of: 2e4e0984c7d6 ("cpufreq: imx6q: Don't disable 792 Mhz OPP unnecessarily")
Signed-off-by: Sasha Levin

cpufreq: brcmstb-avs-cpufreq: Fix -Warray-bounds bug

2023-09-23T08:48:11+00:00

commit e520d0b6be950ce3738cf4b9bd3b392be818f1dc upstream.

Allocate extra space for terminating element at:

drivers/cpufreq/brcmstb-avs-cpufreq.c:
449         table[i].frequency = CPUFREQ_TABLE_END;

and add code comment to make this clear.

This fixes the following -Warray-bounds warning seen after building
ARM with multi_v7_defconfig (GCC 13):
In function 'brcm_avs_get_freq_table',
    inlined from 'brcm_avs_cpufreq_init' at drivers/cpufreq/brcmstb-avs-cpufreq.c:623:15:
drivers/cpufreq/brcmstb-avs-cpufreq.c:449:28: warning: array subscript 5 is outside array bounds of 'void[60]' [-Warray-bounds=]
  449 |         table[i].frequency = CPUFREQ_TABLE_END;
In file included from include/linux/node.h:18,
                 from include/linux/cpu.h:17,
                 from include/linux/cpufreq.h:12,
                 from drivers/cpufreq/brcmstb-avs-cpufreq.c:44:
In function 'devm_kmalloc_array',
    inlined from 'devm_kcalloc' at include/linux/device.h:328:9,
    inlined from 'brcm_avs_get_freq_table' at drivers/cpufreq/brcmstb-avs-cpufreq.c:437:10,
    inlined from 'brcm_avs_cpufreq_init' at drivers/cpufreq/brcmstb-avs-cpufreq.c:623:15:
include/linux/device.h:323:16: note: at offset 60 into object of size 60 allocated by 'devm_kmalloc'
  323 |         return devm_kmalloc(dev, bytes, flags);
      |                ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

This helps with the ongoing efforts to tighten the FORTIFY_SOURCE
routines on memcpy() and help us make progress towards globally
enabling -Warray-bounds.

Link: https://github.com/KSPP/linux/issues/324
Fixes: de322e085995 ("cpufreq: brcmstb-avs-cpufreq: AVS CPUfreq driver for Broadcom STB SoCs")
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva 
Reviewed-by: Florian Fainelli 
Signed-off-by: Viresh Kumar 
Signed-off-by: Greg Kroah-Hartman

cpufreq: powernow-k8: Use related_cpus instead of cpus in driver.exit()

2023-09-23T08:48:00+00:00

[ Upstream commit 03997da042dac73c69e60d91942c727c76828b65 ]

Since the 'cpus' field of policy structure will become empty in the
cpufreq core API, it is better to use 'related_cpus' in the exit()
callback of driver.

Fixes: c3274763bfc3 ("cpufreq: powernow-k8: Initialize per-cpu data-structures properly")
Signed-off-by: Liao Chang 
Signed-off-by: Viresh Kumar 
Signed-off-by: Sasha Levin

cpufreq: amd_freq_sensitivity: Add missing pci_dev_put()

2023-01-18T10:30:06+00:00

[ Upstream commit 91fda1f88c0968f1491ab150bb01690525af150a ]

pci_get_device() will increase the reference count for the returned
pci_dev. We need to use pci_dev_put() to decrease the reference count
after using pci_get_device(). Let's add it.

Fixes: 59a3b3a8db16 ("cpufreq: AMD: Ignore the check for ProcFeedback in ST/CZ")
Signed-off-by: Xiongfeng Wang 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Sasha Levin

x86/devicetable: Move x86 specific macro out of generic code

2022-11-23T06:53:43+00:00

commit ba5bade4cc0d2013cdf5634dae554693c968a090 upstream.

There is no reason that this gunk is in a generic header file. The wildcard
defines need to stay as they are required by file2alias.

Signed-off-by: Thomas Gleixner 
Signed-off-by: Borislav Petkov 
Reviewed-by: Greg Kroah-Hartman 
Link: https://lkml.kernel.org/r/20200320131508.736205164@linutronix.de
Signed-off-by: Thadeu Lima de Souza Cascardo 
Signed-off-by: Greg Kroah-Hartman 
[suleiman: vmx.c moved]
Signed-off-by: Suleiman Souhlal 
Signed-off-by: Greg Kroah-Hartman

cpufreq: pmac32-cpufreq: Fix refcount leak bug

2022-07-21T19:09:30+00:00

[ Upstream commit ccd7567d4b6cf187fdfa55f003a9e461ee629e36 ]

In pmac_cpufreq_init_MacRISC3(), we need to add corresponding
of_node_put() for the three node pointers whose refcount have
been incremented by of_find_node_by_name().

Signed-off-by: Liang He 
Signed-off-by: Viresh Kumar 
Signed-off-by: Sasha Levin

cpufreq: schedutil: Destroy mutex before kobject_put() frees the memory

2021-10-06T13:31:21+00:00

[ Upstream commit cdef1196608892b9a46caa5f2b64095a7f0be60c ]

Since commit e5c6b312ce3c ("cpufreq: schedutil: Use kobject release()
method to free sugov_tunables") kobject_put() has kfree()d the
attr_set before gov_attr_set_put() returns.

kobject_put() isn't the last user of attr_set in gov_attr_set_put(),
the subsequent mutex_destroy() triggers a use-after-free:
| BUG: KASAN: use-after-free in mutex_is_locked+0x20/0x60
| Read of size 8 at addr ffff000800ca4250 by task cpuhp/2/20
|
| CPU: 2 PID: 20 Comm: cpuhp/2 Not tainted 5.15.0-rc1 #12369
| Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development
| Platform, BIOS EDK II Jul 30 2018
| Call trace:
|  dump_backtrace+0x0/0x380
|  show_stack+0x1c/0x30
|  dump_stack_lvl+0x8c/0xb8
|  print_address_description.constprop.0+0x74/0x2b8
|  kasan_report+0x1f4/0x210
|  kasan_check_range+0xfc/0x1a4
|  __kasan_check_read+0x38/0x60
|  mutex_is_locked+0x20/0x60
|  mutex_destroy+0x80/0x100
|  gov_attr_set_put+0xfc/0x150
|  sugov_exit+0x78/0x190
|  cpufreq_offline.isra.0+0x2c0/0x660
|  cpuhp_cpufreq_offline+0x14/0x24
|  cpuhp_invoke_callback+0x430/0x6d0
|  cpuhp_thread_fun+0x1b0/0x624
|  smpboot_thread_fn+0x5e0/0xa6c
|  kthread+0x3a0/0x450
|  ret_from_fork+0x10/0x20

Swap the order of the calls.

Fixes: e5c6b312ce3c ("cpufreq: schedutil: Use kobject release() method to free sugov_tunables")
Cc: 4.7+  # 4.7+
Signed-off-by: James Morse 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Sasha Levin

cpufreq: powernv: Fix init_chip_info initialization in numa=off

2021-09-22T09:48:09+00:00

commit f34ee9cb2c5ac5af426fee6fa4591a34d187e696 upstream.

In the numa=off kernel command-line configuration init_chip_info() loops
around the number of chips and attempts to copy the cpumask of that node
which is NULL for all iterations after the first chip.

Hence, store the cpu mask for each chip instead of derving cpumask from
node while populating the "chips" struct array and copy that to the
chips[i].mask

Fixes: 053819e0bf84 ("cpufreq: powernv: Handle throttling due to Pmax capping at chip level")
Cc: stable@vger.kernel.org # v4.3+
Reported-by: Shirisha Ganta 
Signed-off-by: Pratik R. Sampat 
Reviewed-by: Gautham R. Shenoy 
[mpe: Rename goto label to out_free_chip_cpu_mask]
Signed-off-by: Michael Ellerman 
Link: https://lore.kernel.org/r/20210728120500.87549-2-psampat@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman

cpufreq: armada-37xx: forbid cpufreq for 1.2 GHz variant

2021-08-26T12:36:45+00:00

[ Upstream commit 484f2b7c61b9ae58cc00c5127bcbcd9177af8dfe ]

The 1.2 GHz variant of the Armada 3720 SOC is unstable with DVFS: when
the SOC boots, the WTMI firmware sets clocks and AVS values that work
correctly with 1.2 GHz CPU frequency, but random crashes occur once
cpufreq driver starts scaling.

We do not know currently what is the reason:
- it may be that the voltage value for L0 for 1.2 GHz variant provided
  by the vendor in the OTP is simply incorrect when scaling is used,
- it may be that some delay is needed somewhere,
- it may be something else.

The most sane solution now seems to be to simply forbid the cpufreq
driver on 1.2 GHz variant.

Signed-off-by: Marek Behún 
Fixes: 92ce45fb875d ("cpufreq: Add DVFS support for Armada 37xx")
Signed-off-by: Viresh Kumar 
Signed-off-by: Sasha Levin