linux-stable.git/drivers/clocksource, branch v5.4.232 Linux kernel stable tree clocksource/drivers/sh_cmt: Make sure channel clock supply is enabled 2023-01-18T10:40:56+00:00 Geert Uytterhoeven geert+renesas@glider.be 2020-12-10T19:46:48+00:00 805665aa5295b975c49ff03fb3779f55a9dd8dcf [ Upstream commit 2a97d55333e4299f32c98cca6dc5c4db1c5855fc ] The Renesas Compare Match Timer 0 and 1 (CMT0/1) variants have a register to control the clock supply to the individual channels. Currently the driver does not touch this register, and relies on the documented initial value, which has the clock supply enabled for all channels present. However, when Linux starts on the APE6-EVM development board, only the clock supply to the first CMT1 channel is enabled. Hence the first channel (used as a clockevent) works, while the second channel (used as a clocksource) does not. Note that the default system clocksource is the Cortex-A15 architectured timer, and the user needs to manually switch to the CMT1 clocksource to trigger the broken behavior. Fix this by removing the fragile dependency on implicit reset and/or boot loader state, and by enabling the clock supply explicitly for all channels used instead. This requires postponing the clk_disable() call, else the timer's registers cannot be accessed in sh_cmt_setup_channel(). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20201210194648.2901899-1-geert+renesas@glider.be Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 2a97d55333e4299f32c98cca6dc5c4db1c5855fc ]

The Renesas Compare Match Timer 0 and 1 (CMT0/1) variants have a
register to control the clock supply to the individual channels.
Currently the driver does not touch this register, and relies on the
documented initial value, which has the clock supply enabled for all
channels present.

However, when Linux starts on the APE6-EVM development board, only the
clock supply to the first CMT1 channel is enabled.  Hence the first
channel (used as a clockevent) works, while the second channel (used as
a clocksource) does not.  Note that the default system clocksource is
the Cortex-A15 architectured timer, and the user needs to manually
switch to the CMT1 clocksource to trigger the broken behavior.

Fix this by removing the fragile dependency on implicit reset and/or
boot loader state, and by enabling the clock supply explicitly for all
channels used instead.  This requires postponing the clk_disable() call,
else the timer's registers cannot be accessed in sh_cmt_setup_channel().

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20201210194648.2901899-1-geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
Revert "clocksource/drivers/riscv: Events are stopped during CPU suspend" 2022-12-08T10:23:06+00:00 Conor Dooley conor.dooley@microchip.com 2022-11-22T12:16:21+00:00 9decec2993374ab04554a83ca11e70c41e516bb5 [ Upstream commit d9f15a9de44affe733e34f93bc184945ba277e6d ] This reverts commit 232ccac1bd9b5bfe73895f527c08623e7fa0752d. On the subject of suspend, the RISC-V SBI spec states: This does not cover whether any given events actually reach the hart or not, just what the hart will do if it receives an event. On PolarFire SoC, and potentially other SiFive based implementations, events from the RISC-V timer do reach a hart during suspend. This is not the case for the implementation on the Allwinner D1 - there timer events are not received during suspend. To fix this, the CLOCK_EVT_FEAT_C3STOP (mis)feature was enabled for the timer driver - but this has broken both RCU stall detection and timers generally on PolarFire SoC and potentially other SiFive based implementations. If an AXI read to the PCIe controller on PolarFire SoC times out, the system will stall, however, with CLOCK_EVT_FEAT_C3STOP active, the system just locks up without RCU stalling: io scheduler mq-deadline registered io scheduler kyber registered microchip-pcie 2000000000.pcie: host bridge /soc/pcie@2000000000 ranges: microchip-pcie 2000000000.pcie: MEM 0x2008000000..0x2087ffffff -> 0x0008000000 microchip-pcie 2000000000.pcie: sec error in pcie2axi buffer microchip-pcie 2000000000.pcie: ded error in pcie2axi buffer microchip-pcie 2000000000.pcie: axi read request error microchip-pcie 2000000000.pcie: axi read timeout microchip-pcie 2000000000.pcie: sec error in pcie2axi buffer microchip-pcie 2000000000.pcie: ded error in pcie2axi buffer microchip-pcie 2000000000.pcie: sec error in pcie2axi buffer microchip-pcie 2000000000.pcie: ded error in pcie2axi buffer microchip-pcie 2000000000.pcie: sec error in pcie2axi buffer microchip-pcie 2000000000.pcie: ded error in pcie2axi buffer Freeing initrd memory: 7332K Similarly issues were reported with clock_nanosleep() - with a test app that sleeps each cpu for 6, 5, 4, 3 ms respectively, HZ=250 & the blamed commit in place, the sleep times are rounded up to the next jiffy: == CPU: 1 == == CPU: 2 == == CPU: 3 == == CPU: 4 == Mean: 7.974992 Mean: 7.976534 Mean: 7.962591 Mean: 3.952179 Std Dev: 0.154374 Std Dev: 0.156082 Std Dev: 0.171018 Std Dev: 0.076193 Hi: 9.472000 Hi: 10.495000 Hi: 8.864000 Hi: 4.736000 Lo: 6.087000 Lo: 6.380000 Lo: 4.872000 Lo: 3.403000 Samples: 521 Samples: 521 Samples: 521 Samples: 521 Fortunately, the D1 has a second timer, which is "currently used in preference to the RISC-V/SBI timer driver" so a revert here does not hurt operation of D1 in its current form. Ultimately, a DeviceTree property (or node) will be added to encode the behaviour of the timers, but until then revert the addition of CLOCK_EVT_FEAT_C3STOP. Fixes: 232ccac1bd9b ("clocksource/drivers/riscv: Events are stopped during CPU suspend") Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com> Acked-by: Palmer Dabbelt <palmer@rivosinc.com> Acked-by: Samuel Holland <samuel@sholland.org> Link: https://lore.kernel.org/linux-riscv/YzYTNQRxLr7Q9JR0@spud/ Link: https://github.com/riscv-non-isa/riscv-sbi-doc/issues/98/ Link: https://lore.kernel.org/linux-riscv/bf6d3b1f-f703-4a25-833e-972a44a04114@sholland.org/ Link: https://lore.kernel.org/r/20221122121620.3522431-1-conor.dooley@microchip.com Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit d9f15a9de44affe733e34f93bc184945ba277e6d ]

This reverts commit 232ccac1bd9b5bfe73895f527c08623e7fa0752d.

On the subject of suspend, the RISC-V SBI spec states:

  This does not cover whether any given events actually reach the hart or
  not, just what the hart will do if it receives an event. On PolarFire
  SoC, and potentially other SiFive based implementations, events from the
  RISC-V timer do reach a hart during suspend. This is not the case for the
  implementation on the Allwinner D1 - there timer events are not received
  during suspend.

To fix this, the CLOCK_EVT_FEAT_C3STOP (mis)feature was enabled for the
timer driver - but this has broken both RCU stall detection and timers
generally on PolarFire SoC and potentially other SiFive based
implementations.

If an AXI read to the PCIe controller on PolarFire SoC times out, the
system will stall, however, with CLOCK_EVT_FEAT_C3STOP active, the system
just locks up without RCU stalling:

	io scheduler mq-deadline registered
	io scheduler kyber registered
	microchip-pcie 2000000000.pcie: host bridge /soc/pcie@2000000000 ranges:
	microchip-pcie 2000000000.pcie:      MEM 0x2008000000..0x2087ffffff -> 0x0008000000
	microchip-pcie 2000000000.pcie: sec error in pcie2axi buffer
	microchip-pcie 2000000000.pcie: ded error in pcie2axi buffer
	microchip-pcie 2000000000.pcie: axi read request error
	microchip-pcie 2000000000.pcie: axi read timeout
	microchip-pcie 2000000000.pcie: sec error in pcie2axi buffer
	microchip-pcie 2000000000.pcie: ded error in pcie2axi buffer
	microchip-pcie 2000000000.pcie: sec error in pcie2axi buffer
	microchip-pcie 2000000000.pcie: ded error in pcie2axi buffer
	microchip-pcie 2000000000.pcie: sec error in pcie2axi buffer
	microchip-pcie 2000000000.pcie: ded error in pcie2axi buffer
	Freeing initrd memory: 7332K

Similarly issues were reported with clock_nanosleep() - with a test app
that sleeps each cpu for 6, 5, 4, 3 ms respectively, HZ=250 & the blamed
commit in place, the sleep times are rounded up to the next jiffy:

== CPU: 1 ==      == CPU: 2 ==      == CPU: 3 ==      == CPU: 4 ==
Mean: 7.974992    Mean: 7.976534    Mean: 7.962591    Mean: 3.952179
Std Dev: 0.154374 Std Dev: 0.156082 Std Dev: 0.171018 Std Dev: 0.076193
Hi: 9.472000      Hi: 10.495000     Hi: 8.864000      Hi: 4.736000
Lo: 6.087000      Lo: 6.380000      Lo: 4.872000      Lo: 3.403000
Samples: 521      Samples: 521      Samples: 521      Samples: 521

Fortunately, the D1 has a second timer, which is "currently used in
preference to the RISC-V/SBI timer driver" so a revert here does not
hurt operation of D1 in its current form.

Ultimately, a DeviceTree property (or node) will be added to encode the
behaviour of the timers, but until then revert the addition of
CLOCK_EVT_FEAT_C3STOP.

Fixes: 232ccac1bd9b ("clocksource/drivers/riscv: Events are stopped during CPU suspend")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Acked-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/linux-riscv/YzYTNQRxLr7Q9JR0@spud/
Link: https://github.com/riscv-non-isa/riscv-sbi-doc/issues/98/
Link: https://lore.kernel.org/linux-riscv/bf6d3b1f-f703-4a25-833e-972a44a04114@sholland.org/
Link: https://lore.kernel.org/r/20221122121620.3522431-1-conor.dooley@microchip.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
clocksource/drivers/ixp4xx: remove EXPORT_SYMBOL_GPL from ixp4xx_timer_setup() 2022-07-07T15:36:53+00:00 Greg Kroah-Hartman gregkh@linuxfoundation.org 2022-06-30T09:55:42+00:00 0ac2845937ce03f474be97687b7d016447b24c3e ixp4xx_timer_setup is exported, and so can not be an __init function. But it does not need to be exported as it is only called from one in-kernel function, so just remove the EXPORT_SYMBOL_GPL() marking to resolve the build warning. This is fixed "properly" in commit 41929c9f628b ("clocksource/drivers/ixp4xx: Drop boardfile probe path") but that can not be backported to older kernels as the reworking of the IXP4xx codebase is not suitable for stable releases. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
ixp4xx_timer_setup is exported, and so can not be an __init function.
But it does not need to be exported as it is only called from one
in-kernel function, so just remove the EXPORT_SYMBOL_GPL() marking to
resolve the build warning.

This is fixed "properly" in commit 41929c9f628b
("clocksource/drivers/ixp4xx: Drop boardfile probe path") but that can
not be backported to older kernels as the reworking of the IXP4xx
codebase is not suitable for stable releases.

Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
clocksource: hyper-v: unexport __init-annotated hv_init_clocksource() 2022-06-22T12:11:21+00:00 Masahiro Yamada masahiroy@kernel.org 2022-06-06T05:02:38+00:00 cff3a7ce6e81418b6e8bac941779bbf5d342d626 [ Upstream commit 245b993d8f6c4e25f19191edfbd8080b645e12b1 ] EXPORT_SYMBOL and __init is a bad combination because the .init.text section is freed up after the initialization. Hence, modules cannot use symbols annotated __init. The access to a freed symbol may end up with kernel panic. modpost used to detect it, but it has been broken for a decade. Recently, I fixed modpost so it started to warn it again, then this showed up in linux-next builds. There are two ways to fix it: - Remove __init - Remove EXPORT_SYMBOL I chose the latter for this case because the only in-tree call-site, arch/x86/kernel/cpu/mshyperv.c is never compiled as modular. (CONFIG_HYPERVISOR_GUEST is boolean) Fixes: dd2cb348613b ("clocksource/drivers: Continue making Hyper-V clocksource ISA agnostic") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/20220606050238.4162200-1-masahiroy@kernel.org Signed-off-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 245b993d8f6c4e25f19191edfbd8080b645e12b1 ]

EXPORT_SYMBOL and __init is a bad combination because the .init.text
section is freed up after the initialization. Hence, modules cannot
use symbols annotated __init. The access to a freed symbol may end up
with kernel panic.

modpost used to detect it, but it has been broken for a decade.

Recently, I fixed modpost so it started to warn it again, then this
showed up in linux-next builds.

There are two ways to fix it:

  - Remove __init
  - Remove EXPORT_SYMBOL

I chose the latter for this case because the only in-tree call-site,
arch/x86/kernel/cpu/mshyperv.c is never compiled as modular.
(CONFIG_HYPERVISOR_GUEST is boolean)

Fixes: dd2cb348613b ("clocksource/drivers: Continue making Hyper-V clocksource ISA agnostic")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20220606050238.4162200-1-masahiroy@kernel.org
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
clocksource/drivers/sp804: Avoid error on multiple instances 2022-06-14T16:12:00+00:00 Andre Przywara andre.przywara@arm.com 2022-05-06T16:25:22+00:00 1bcfb95de192728fe48737fde6c09abd578945c4 [ Upstream commit a98399cbc1e05f7b977419f03905501d566cf54e ] When a machine sports more than one SP804 timer instance, we only bring up the first one, since multiple timers of the same kind are not useful to Linux. As this is intentional behaviour, we should not return an error message, as we do today: =============== [ 0.000800] Failed to initialize '/bus@8000000/motherboard-bus@8000000/iofpga-bus@300000000/timer@120000': -22 =============== Replace the -EINVAL return with a debug message and return 0 instead. Also we do not reach the init function anymore if the DT node is disabled (as this is now handled by OF_DECLARE), so remove the explicit check for that case. This fixes a long standing bogus error when booting ARM's fastmodels. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/20220506162522.3675399-1-andre.przywara@arm.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit a98399cbc1e05f7b977419f03905501d566cf54e ]

When a machine sports more than one SP804 timer instance, we only bring
up the first one, since multiple timers of the same kind are not useful
to Linux. As this is intentional behaviour, we should not return an
error message, as we do today:
===============
[    0.000800] Failed to initialize '/bus@8000000/motherboard-bus@8000000/iofpga-bus@300000000/timer@120000': -22
===============

Replace the -EINVAL return with a debug message and return 0 instead.

Also we do not reach the init function anymore if the DT node is
disabled (as this is now handled by OF_DECLARE), so remove the explicit
check for that case.

This fixes a long standing bogus error when booting ARM's fastmodels.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20220506162522.3675399-1-andre.przywara@arm.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
clocksource/drivers/oxnas-rps: Fix irq_of_parse_and_map() return value 2022-06-14T16:11:54+00:00 Krzysztof Kozlowski krzysztof.kozlowski@linaro.org 2022-04-22T10:41:01+00:00 80f6712f241c4c4937fc93a4d163120bb457007a [ Upstream commit 9c04a8ff03def4df3f81219ffbe1ec9b44ff5348 ] The irq_of_parse_and_map() returns 0 on failure, not a negative ERRNO. Fixes: 89355274e1f7 ("clocksource/drivers/oxnas-rps: Add Oxford Semiconductor RPS Dual Timer") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20220422104101.55754-1-krzysztof.kozlowski@linaro.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 9c04a8ff03def4df3f81219ffbe1ec9b44ff5348 ]

The irq_of_parse_and_map() returns 0 on failure, not a negative ERRNO.

Fixes: 89355274e1f7 ("clocksource/drivers/oxnas-rps: Add Oxford Semiconductor RPS Dual Timer")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20220422104101.55754-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
clocksource/drivers/riscv: Events are stopped during CPU suspend 2022-06-14T16:11:53+00:00 Samuel Holland samuel@sholland.org 2022-05-09T01:21:21+00:00 d041e885749f1506d41bc0dd945f27fc0cfc73f7 [ Upstream commit 232ccac1bd9b5bfe73895f527c08623e7fa0752d ] Some implementations of the SBI time extension depend on hart-local state (for example, CSRs) that are lost or hardware that is powered down when a CPU is suspended. To be safe, the clockevents driver cannot assume that timer IRQs will be received during CPU suspend. Fixes: 62b019436814 ("clocksource: new RISC-V SBI timer driver") Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Anup Patel <anup@brainfault.org> Link: https://lore.kernel.org/r/20220509012121.40031-1-samuel@sholland.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 232ccac1bd9b5bfe73895f527c08623e7fa0752d ]

Some implementations of the SBI time extension depend on hart-local
state (for example, CSRs) that are lost or hardware that is powered
down when a CPU is suspended. To be safe, the clockevents driver
cannot assume that timer IRQs will be received during CPU suspend.

Fixes: 62b019436814 ("clocksource: new RISC-V SBI timer driver")
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20220509012121.40031-1-samuel@sholland.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
clocksource: acpi_pm: fix return value of __setup handler 2022-04-15T12:18:05+00:00 Randy Dunlap rdunlap@infradead.org 2022-03-17T15:39:39+00:00 715a34317255d66d9bcd03cf4ae898a0c3c76f66 [ Upstream commit 6a861abceecb68497dd82a324fee45a5332dcece ] __setup() handlers should return 1 to obsolete_checksetup() in init/main.c to indicate that the boot option has been handled. A return of 0 causes the boot option/value to be listed as an Unknown kernel parameter and added to init's (limited) environment strings. The __setup() handler interface isn't meant to handle negative return values -- they are non-zero, so they mean "handled" (like a return value of 1 does), but that's just a quirk. So return 1 from parse_pmtmr(). Also print a warning message if kstrtouint() returns an error. Fixes: 6b148507d3d0 ("pmtmr: allow command line override of ioport") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru> Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 6a861abceecb68497dd82a324fee45a5332dcece ]

__setup() handlers should return 1 to obsolete_checksetup() in
init/main.c to indicate that the boot option has been handled.
A return of 0 causes the boot option/value to be listed as an Unknown
kernel parameter and added to init's (limited) environment strings.

The __setup() handler interface isn't meant to handle negative return
values -- they are non-zero, so they mean "handled" (like a return
value of 1 does), but that's just a quirk. So return 1 from
parse_pmtmr(). Also print a warning message if kstrtouint() returns
an error.

Fixes: 6b148507d3d0 ("pmtmr: allow command line override of ioport")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
clocksource/drivers/timer-of: Check return value of of_iomap in timer_of_base_init() 2022-04-15T12:18:05+00:00 Guillaume Ranquet granquet@baylibre.com 2022-03-07T17:26:56+00:00 8dc887ae33d2d9b70e5e73f0963c7e46bb010795 [ Upstream commit 4467b8bad2401794fb89a0268c8c8257180bf60f ] of_base->base can either be iomapped using of_io_request_and_map() or of_iomap() depending whether or not an of_base->name has been set. Thus check of_base->base against NULL as of_iomap() does not return a PTR_ERR() in case of error. Fixes: 9aea417afa6b ("clocksource/drivers/timer-of: Don't request the resource by name") Signed-off-by: Guillaume Ranquet <granquet@baylibre.com> Link: https://lore.kernel.org/r/20220307172656.4836-1-granquet@baylibre.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 4467b8bad2401794fb89a0268c8c8257180bf60f ]

of_base->base can either be iomapped using of_io_request_and_map() or
of_iomap() depending whether or not an of_base->name has been set.

Thus check of_base->base against NULL as of_iomap() does not return a
PTR_ERR() in case of error.

Fixes: 9aea417afa6b ("clocksource/drivers/timer-of: Don't request the resource by name")
Signed-off-by: Guillaume Ranquet <granquet@baylibre.com>
Link: https://lore.kernel.org/r/20220307172656.4836-1-granquet@baylibre.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
clocksource/drivers/timer-ti-dm: Select TIMER_OF 2021-11-17T08:48:39+00:00 Kees Cook keescook@chromium.org 2021-08-28T17:57:47+00:00 dc18f080629747bdec9139ed73b101ba55afdb49 [ Upstream commit eda9a4f7af6ee47e9e131f20e4f8a41a97379293 ] When building OMAP_DM_TIMER without TIMER_OF, there are orphan sections due to the use of TIMER_OF_DELCARE() without CONFIG_TIMER_OF. Select CONFIG_TIMER_OF when enaling OMAP_DM_TIMER: arm-linux-gnueabi-ld: warning: orphan section `__timer_of_table' from `drivers/clocksource/timer-ti-dm-systimer.o' being placed in section `__timer_of_table' Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/lkml/202108282255.tkdt4ani-lkp@intel.com/ Cc: Tony Lindgren <tony@atomide.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Keerthy <j-keerthy@ti.com> Cc: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Cc: Ladislav Michl <ladis@linux-mips.org> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: linux-omap@vger.kernel.org Fixes: 52762fbd1c47 ("clocksource/drivers/timer-ti-dm: Add clockevent and clocksource support") Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20210828175747.3777891-1-keescook@chromium.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit eda9a4f7af6ee47e9e131f20e4f8a41a97379293 ]

When building OMAP_DM_TIMER without TIMER_OF, there are orphan sections
due to the use of TIMER_OF_DELCARE() without CONFIG_TIMER_OF. Select
CONFIG_TIMER_OF when enaling OMAP_DM_TIMER:

arm-linux-gnueabi-ld: warning: orphan section `__timer_of_table' from `drivers/clocksource/timer-ti-dm-systimer.o' being placed in section `__timer_of_table'

Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/202108282255.tkdt4ani-lkp@intel.com/
Cc: Tony Lindgren <tony@atomide.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Keerthy <j-keerthy@ti.com>
Cc: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Cc: Ladislav Michl <ladis@linux-mips.org>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: linux-omap@vger.kernel.org
Fixes: 52762fbd1c47 ("clocksource/drivers/timer-ti-dm: Add clockevent and clocksource support")
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20210828175747.3777891-1-keescook@chromium.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>