linux-stable.git/drivers/clocksource, branch v5.15.26

ARM: dts: Fix timer regression for beagleboard revision c

2022-02-16T11:56:21+00:00

[ Upstream commit 23885389dbbbbc698986e77a45c1fc44a6e3632e ]

Commit e428e250fde6 ("ARM: dts: Configure system timers for omap3")
caused a timer regression for beagleboard revision c where the system
clockevent stops working if omap3isp module is unloaded.

Turns out we still have beagleboard revisions a-b4 capacitor c70 quirks
applied that limit the usable timers for no good reason. This also affects
the power management as we use the system clock instead of the 32k clock
source.

Let's fix the issue by adding a new omap3-beagle-ab4.dts for the old timer
quirks. This allows us to remove the timer quirks for later beagleboard
revisions. We also need to update the related timer quirk check for the
correct compatible property.

Fixes: e428e250fde6 ("ARM: dts: Configure system timers for omap3")
Cc: linux-kernel@vger.kernel.org
Cc: Daniel Lezcano 
Cc: Thomas Gleixner 
Cc: Rob Herring 
Reported-by: Jarkko Nikula 
Tested-by: Jarkko Nikula 
Signed-off-by: Tony Lindgren 
Signed-off-by: Sasha Levin

clocksource/drivers/dw_apb_timer_of: Fix probe failure

2021-12-14T09:57:23+00:00

commit a663bd19114d79f0902e2490fc484e5a7419cdc2 upstream.

The driver refuses to probe with -EINVAL since the commit 5d9814df0aec
("clocksource/drivers/dw_apb_timer_of: Add error handling if no clock
available").

Before the driver used to probe successfully if either "clock-freq" or
"clock-frequency" properties has been specified in the device tree.

That commit changed

if (A && B)
	panic("No clock nor clock-frequency property");

into

if (!A && !B)
	return 0;

That's a bug: the reverse of `A && B` is '!A || !B', not '!A && !B'

Signed-off-by: Vadim V. Vlasov 
Signed-off-by: Alexey Sheplyakov 
Fixes: 5d9814df0aec56a6 ("clocksource/drivers/dw_apb_timer_of: Add error handling if no clock available").
Cc: Daniel Lezcano 
Cc: Dinh Nguyen 
Cc: Thomas Gleixner 
Cc: Vadim V. Vlasov 
Acked-by: Dinh Nguyen 
Link: https://lore.kernel.org/r/20211109153401.157491-1-asheplyakov@basealt.ru
Signed-off-by: Daniel Lezcano 
Signed-off-by: Greg Kroah-Hartman

clocksource/drivers/timer-ti-dm: Select TIMER_OF

2021-11-18T18:16:39+00:00

[ Upstream commit eda9a4f7af6ee47e9e131f20e4f8a41a97379293 ]

When building OMAP_DM_TIMER without TIMER_OF, there are orphan sections
due to the use of TIMER_OF_DELCARE() without CONFIG_TIMER_OF. Select
CONFIG_TIMER_OF when enaling OMAP_DM_TIMER:

arm-linux-gnueabi-ld: warning: orphan section `__timer_of_table' from `drivers/clocksource/timer-ti-dm-systimer.o' being placed in section `__timer_of_table'

Reported-by: kernel test robot 
Link: https://lore.kernel.org/lkml/202108282255.tkdt4ani-lkp@intel.com/
Cc: Tony Lindgren 
Cc: Daniel Lezcano 
Cc: Keerthy 
Cc: Sebastian Reichel 
Cc: Ladislav Michl 
Cc: Grygorii Strashko 
Cc: linux-omap@vger.kernel.org
Fixes: 52762fbd1c47 ("clocksource/drivers/timer-ti-dm: Add clockevent and clocksource support")
Signed-off-by: Kees Cook 
Acked-by: Tony Lindgren 
Link: https://lore.kernel.org/r/20210828175747.3777891-1-keescook@chromium.org
Signed-off-by: Daniel Lezcano 
Signed-off-by: Sasha Levin

Merge tag 'mips_5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

2021-09-03T18:11:54+00:00

Pull MIPS updates from Thomas Bogendoerfer:

 - converted Pistachio platform to use MIPS generic kernel

 - fixes and cleanups

* tag 'mips_5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (29 commits)
  MIPS: Malta: fix alignment of the devicetree buffer
  MIPS: ingenic: Unconditionally enable clock of CPU #0
  MIPS: mscc: ocelot: mark the phy-mode for internal PHY ports
  MIPS: mscc: ocelot: disable all switch ports by default
  MAINTAINERS: adjust PISTACHIO SOC SUPPORT after its retirement
  MIPS: Return true/false (not 1/0) from bool functions
  MIPS: generic: Return true/false (not 1/0) from bool functions
  MIPS: Make a alias for pistachio_defconfig
  MIPS: Retire MACH_PISTACHIO
  MIPS: config: generic: Add config for Marduk board
  pinctrl: pistachio: Make it as an option
  phy: pistachio-usb: Depend on MIPS || COMPILE_TEST
  clocksource/drivers/pistachio: Make it selectable for MIPS
  clk: pistachio: Make it selectable for generic MIPS kernel
  MIPS: DTS: Pistachio add missing cpc and cdmm
  MIPS: generic: Allow generating FIT image for Marduk board
  MIPS: locking/atomic: Fix atomic{_64,}_sub_if_positive
  MIPS: loongson2ef: don't build serial.o unconditionally
  MIPS: Replace deprecated CPU-hotplug functions.
  MIPS: Alchemy: Fix spelling contraction "cant" -> "can't"
  ...

Merge tag 'hyperv-next-signed-20210831' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux

2021-09-02T01:25:20+00:00

Pull hyperv updates from Wei Liu:

 - make Hyper-V code arch-agnostic (Michael Kelley)

 - fix sched_clock behaviour on Hyper-V (Ani Sinha)

 - fix a fault when Linux runs as the root partition on MSHV (Praveen
   Kumar)

 - fix VSS driver (Vitaly Kuznetsov)

 - cleanup (Sonia Sharma)

* tag 'hyperv-next-signed-20210831' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
  hv_utils: Set the maximum packet size for VSS driver to the length of the receive buffer
  Drivers: hv: Enable Hyper-V code to be built on ARM64
  arm64: efi: Export screen_info
  arm64: hyperv: Initialize hypervisor on boot
  arm64: hyperv: Add panic handler
  arm64: hyperv: Add Hyper-V hypercall and register access utilities
  x86/hyperv: fix root partition faults when writing to VP assist page MSR
  hv: hyperv.h: Remove unused inline functions
  drivers: hv: Decouple Hyper-V clock/timer code from VMbus drivers
  x86/hyperv: add comment describing TSC_INVARIANT_CONTROL MSR setting bit 0
  Drivers: hv: Move Hyper-V misc functionality to arch-neutral code
  Drivers: hv: Add arch independent default functions for some Hyper-V handlers
  Drivers: hv: Make portions of Hyper-V init code be arch neutral
  x86/hyperv: fix for unwanted manipulation of sched_clock when TSC marked unstable
  asm-generic/hyperv: Add missing #include of nmi.h

Merge tag 'drivers-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2021-09-01T22:25:28+00:00

Pull ARM SoC driver updates from Arnd Bergmann:
 "These are updates for drivers that are tied to a particular SoC,
  including the correspondig device tree bindings:

   - A couple of reset controller changes for unisoc, uniphier, renesas
     and zte platforms

   - memory controller driver fixes for omap and tegra

   - Rockchip io domain driver updates

   - Lots of updates for qualcomm platforms, mostly touching their
     firmware and power management drivers

   - Tegra FUSE and firmware driver updateѕ

   - Support for virtio transports in the SCMI firmware framework

   - cleanup of ixp4xx drivers, towards enabling multiplatform support
     and bringing it up to date with modern platforms

   - Minor updates for keystone, mediatek, omap, renesas"

* tag 'drivers-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (96 commits)
  reset: simple: remove ZTE details in Kconfig help
  soc: rockchip: io-domain: Remove unneeded semicolon
  soc: rockchip: io-domain: add rk3568 support
  dt-bindings: power: add rk3568-pmu-io-domain support
  bus: ixp4xx: return on error in ixp4xx_exp_probe()
  soc: renesas: Prefer memcpy() over strcpy()
  firmware: tegra: Stop using seq_get_buf()
  soc/tegra: fuse: Enable fuse clock on suspend for Tegra124
  soc/tegra: fuse: Add runtime PM support
  soc/tegra: fuse: Clear fuse->clk on driver probe failure
  soc/tegra: pmc: Prevent racing with cpuilde driver
  soc/tegra: bpmp: Remove unused including 
  dt-bindings: soc: ti: pruss: Add dma-coherent property
  soc: ti: Remove pm_runtime_irq_safe() usage for smartreflex
  soc: ti: pruss: Enable support for ICSSG subsystems on K3 AM64x SoCs
  dt-bindings: soc: ti: pruss: Update bindings for K3 AM64x SoCs
  firmware: arm_scmi: Use WARN_ON() to check configured transports
  firmware: arm_scmi: Fix boolconv.cocci warnings
  soc: mediatek: mmsys: Fix missing UFOE component in mt8173 table routing
  soc: mediatek: mmsys: add MT8365 support
  ...

clocksource/drivers/fttmr010: Pass around less pointers

2021-08-14T08:49:49+00:00

Just pass bool flags from the different initcalls and use the
flags to set the right pointers. This results in less pointers
passed around in init.

Cc: Cédric Le Goater 
Cc: Joel Stanley 
Signed-off-by: Linus Walleij 
Signed-off-by: Daniel Lezcano 
Link: https://lore.kernel.org/r/20210724224424.2085404-1-linus.walleij@linaro.org

clocksource/drivers/mediatek: Optimize systimer irq clear flow on shutdown

2021-08-14T00:44:35+00:00

mtk_syst_clkevt_shutdown is called after irq disabled in suspend flow,
clear any pending systimer irq when shutdown to avoid suspend aborted
due to timer irq pending

Also as for systimer in mediatek socs, there must be firstly enable
timer before clear systimer irq

Fixes: e3af677607d9("clocksource/drivers/timer-mediatek: Add support for system timer")
Signed-off-by: Fengquan Chen 
Tested-by: Hsin-Yi Wang 
Signed-off-by: Daniel Lezcano 
Link: https://lore.kernel.org/r/1617960162-1988-2-git-send-email-Fengquan.Chen@mediatek.com

clocksource/drivers/ingenic: Use bitfield macro helpers

2021-08-14T00:44:35+00:00

Use "FIELD_GET()" and "FIELD_PREP()" to simplify the code.

[dlezcano] : Changed title

Signed-off-by: 周琰杰 (Zhou Yanjie) 
Reviewed-by: Paul Cercueil 
Signed-off-by: Daniel Lezcano 
Link: https://lore.kernel.org/r/1627638188-116163-1-git-send-email-zhouyanjie@wanyeetech.com

clocksource/drivers/sh_cmt: Fix wrong setting if don't request IRQ for clock source channel

2021-08-13T18:26:29+00:00

If CMT instance has at least two channels, one channel will be used
as a clock source and another one used as a clock event device.
In that case, IRQ is not requested for clock source channel so
sh_cmt_clock_event_program_verify() might work incorrectly.
Besides, when a channel is only used for clock source, don't need to
re-set the next match_value since it should be maximum timeout as
it still is.

On the other hand, due to no IRQ, total_cycles is not counted up
when reaches compare match time (timer counter resets to zero),
so sh_cmt_clocksource_read() returns unexpected value.
Therefore, use 64-bit clocksoure's mask for 32-bit or 16-bit variants
will also lead to wrong delta calculation. Hence, this mask should
correspond to timer counter width, and above function just returns
the raw value of timer counter register.

Fixes: bfa76bb12f23 ("clocksource: sh_cmt: Request IRQ for clock event device only")
Fixes: 37e7742c55ba ("clocksource/drivers/sh_cmt: Fix clocksource width for 32-bit machines")
Signed-off-by: Phong Hoang 
Signed-off-by: Niklas Söderlund 
Signed-off-by: Daniel Lezcano 
Link: https://lore.kernel.org/r/20210422123443.73334-1-niklas.soderlund+renesas@ragnatech.se