linux-stable.git/drivers/clocksource, branch v4.14.78

clocksource/drivers/fttmr010: Fix set_next_event handler

2018-10-20T07:48:52+00:00

[ Upstream commit 4451d3f59f2a6f95e5d205c2d04ea072955d080d ]

Currently, the aspeed MATCH1 register is updated to  in set_next_event handler, with the assumption that COUNT
register value is preserved when the timer is disabled and it continues
decrementing after the timer is enabled. But the assumption is wrong:
RELOAD register is loaded into COUNT register when the aspeed timer is
enabled, which means the next event may be delayed because timer
interrupt won't be generated until <0xFFFFFFFF - current_count +
cycles>.

The problem can be fixed by updating RELOAD register to , and
COUNT register will be re-loaded when the timer is enabled and interrupt
is generated when COUNT register overflows.

The test result on Facebook Backpack-CMM BMC hardware (AST2500) shows
the issue is fixed: without the patch, usleep(100) suspends the process
for several milliseconds (and sometimes even over 40 milliseconds);
after applying the fix, usleep(100) takes averagely 240 microseconds to
return under the same workload level.

Signed-off-by: Tao Ren 
Reviewed-by: Linus Walleij 
Tested-by: Lei YU 
Signed-off-by: Daniel Lezcano 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

clocksource/drivers/ti-32k: Add CLOCK_SOURCE_SUSPEND_NONSTOP flag for non-am43 SoCs

2018-10-20T07:48:49+00:00

[ Upstream commit 3b7d96a0dbb6b630878597a1838fc39f808b761b ]

The 32k clocksource is NONSTOP for non-am43 SoCs. Hence
add the flag for all the other SoCs.

Reported-by: Tony Lindgren 
Signed-off-by: Keerthy 
Acked-by: Tony Lindgren 
Signed-off-by: Daniel Lezcano 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

clocksource/drivers/timer-atmel-pit: Properly handle error cases

2018-10-13T07:27:23+00:00

commit 52bf4a900d9cede3eb14982d0f2c5e6db6d97cc3 upstream.

The smatch utility reports a possible leak:

smatch warnings:
drivers/clocksource/timer-atmel-pit.c:183 at91sam926x_pit_dt_init() warn: possible memory leak of 'data'

Ensure data is freed before exiting with an error.

Reported-by: Dan Carpenter 
Signed-off-by: Alexandre Belloni 
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Lezcano 
Signed-off-by: Greg Kroah-Hartman

clocksource/drivers/imx-tpm: Correct some registers operation flow

2018-06-20T19:02:40+00:00

[ Upstream commit 506a7be93ff773d5d4cf75a59f342865605b4910 ]

According to i.MX7ULP reference manual, TPM_SC_CPWMS can ONLY be written when
counter is disabled, TPM_SC_TOF is write-1-clear, TPM_C0SC_CHF is also
write-1-clear, correct these registers initialization flow;

Signed-off-by: Anson Huang 
Signed-off-by: Daniel Lezcano 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

clocksource/drivers/mips-gic-timer: Use correct shift count to extract data

2018-05-30T05:52:06+00:00

[ Upstream commit 5753405e27f8fe4c42c1537d3ddbd9e058e54cdc ]

__gic_clocksource_init() extracts the GIC_CONFIG_COUNTBITS field from
read_gic_config() by right shifting the register value. The shift count is
determined by the most significant bit (__fls) of the bitmask which is
wrong as it shifts out the complete bitfield.

Use the least significant bit (__ffs) instead to shift the bitfield down to
bit 0.

Fixes: e07127a077c7 ("clocksource: mips-gic-timer: Use new GIC accessor functions")
Signed-off-by: Felix Fietkau 
Signed-off-by: Thomas Gleixner 
Cc: daniel.lezcano@linaro.org
Cc: paul.burton@imgtec.com
Link: https://lkml.kernel.org/r/20180228095610.50341-1-nbd@nbd.name
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

clocksource/drivers/fsl_ftm_timer: Fix error return checking

2018-05-30T05:52:04+00:00

[ Upstream commit f287eb9013ccf199cbfa4eabd80c36fedfc15a73 ]

The error checks on freq for a negative error return always fails because
freq is unsigned and can never be negative. Fix this by making freq a
signed long.

Detected with Coccinelle:
drivers/clocksource/fsl_ftm_timer.c:287:5-9: WARNING: Unsigned expression
compared with zero: freq <= 0
drivers/clocksource/fsl_ftm_timer.c:291:5-9: WARNING: Unsigned expression
compared with zero: freq <= 0

Fixes: 2529c3a33079 ("clocksource: Add Freescale FlexTimer Module (FTM) timer support")
Signed-off-by: Colin Ian King 
Signed-off-by: Thomas Gleixner 
Cc: Daniel Lezcano 
Cc: kernel-janitors@vger.kernel.org
Link: https://lkml.kernel.org/r/20180226113614.3092-1-colin.king@canonical.com
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

clocksource/imx-tpm: Correct -ETIME return condition check

2018-04-26T09:02:02+00:00

commit 7407188489c62a7b5694bc75a6db2b82af94c9a5 upstream.

The additional brakects added to tpm_set_next_event's return value
computation causes (int) forced type conversion NOT taking effect, and the
incorrect value return will cause various system timer issue, like RCU
stall etc..

Remove the additional brackets to make sure tpm_set_next_event always
returns correct value.

Fixes: 059ab7b82eec ("clocksource/drivers/imx-tpm: Add imx tpm timer support")
Signed-off-by: Anson Huang 
Signed-off-by: Thomas Gleixner 
Acked-by: Dong Aisheng 
Cc: stable@vger.kernel.org
Cc: daniel.lezcano@linaro.org
Cc: Linux-imx@nxp.com
Link: https://lkml.kernel.org/r/1524117883-2484-1-git-send-email-Anson.Huang@nxp.com
Signed-off-by: Greg Kroah-Hartman

clocksource/drivers/stm32: Fix kernel panic with multiple timers

2018-02-16T19:23:09+00:00

commit e0aeca3d8cbaea514eb98df1149faa918f9ec42d upstream.

The current code hides a couple of bugs:

 - The global variable 'clock_event_ddata' is overwritten each time the
   init function is invoked.

This is fixed with a kmemdup() instead of assigning the global variable. That
prevents a memory corruption when several timers are defined in the DT.

 - The clockevent's event_handler is NULL if the time framework does
   not select the clockevent when registering it, this is fine but the init
   code generates in any case an interrupt leading to dereference this
   NULL pointer.

The stm32 timer works with shadow registers, a mechanism to cache the
registers. When a change is done in one buffered register, we need to
artificially generate an event to force the timer to copy the content
of the register to the shadowed register.

The auto-reload register (ARR) is one of the shadowed register as well as
the prescaler register (PSC), so in order to force the copy, we issue an
event which in turn leads to an interrupt and the NULL dereference.

This is fixed by inverting two lines where we clear the status register
before enabling the update event interrupt.

As this kernel crash is resulting from the combination of these two bugs,
the fixes are grouped into a single patch.

Tested-by: Benjamin Gaignard 
Signed-off-by: Daniel Lezcano 
Acked-by: Benjamin Gaignard 
Cc: Alexandre Torgue 
Cc: Linus Torvalds 
Cc: Maxime Coquelin 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Link: http://lkml.kernel.org/r/1515418139-23276-11-git-send-email-daniel.lezcano@linaro.org
Signed-off-by: Ingo Molnar 
Signed-off-by: Greg Kroah-Hartman

clocksource/drivers/arm_arch_timer: Validate CNTFRQ after enabling frame

2017-12-10T12:40:41+00:00

[ Upstream commit 21492e1333a0d07af6968667f128e19088cf5ead ]

The ACPI GTDT code validates the CNTFRQ field of each MMIO timer
frame against the CNTFRQ system register of the current CPU, to
ensure that they are equal, which is mandated by the architecture.

However, reading the CNTFRQ field of a frame is not possible until
the RFRQ bit in the frame's CNTACRn register is set, and doing so
before that willl produce the following error:

  arch_timer: [Firmware Bug]: CNTFRQ mismatch: frame @ 0x00000000e0be0000: (0x00000000), CPU: (0x0ee6b280)
  arch_timer: Disabling MMIO timers due to CNTFRQ mismatch
  arch_timer: Failed to initialize memory-mapped timer.

The reason is that the CNTFRQ field is RES0 if access is not enabled.

So move the validation of CNTFRQ into the loop that iterates over the
timers to find the best frame, but defer it until after we have selected
the best frame, which should also have enabled the RFRQ bit.

Signed-off-by: Ard Biesheuvel 
Signed-off-by: Mark Rutland 
Signed-off-by: Daniel Lezcano 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart 
Reviewed-by: Philippe Ombredanne 
Reviewed-by: Thomas Gleixner 
Signed-off-by: Greg Kroah-Hartman