linux-stable.git/drivers/clocksource, branch v4.14.331 Linux kernel stable tree clocksource/drivers/timer-atmel-tcb: Fix initialization on SAM9 hardware 2023-11-28T16:45:42+00:00 Ronald Wahl ronald.wahl@raritan.com 2023-10-07T16:17:13+00:00 41bcc2170c9f0bfe5c9ec8395c5a3314b2e442aa [ Upstream commit 6d3bc4c02d59996d1d3180d8ed409a9d7d5900e0 ] On SAM9 hardware two cascaded 16 bit timers are used to form a 32 bit high resolution timer that is used as scheduler clock when the kernel has been configured that way (CONFIG_ATMEL_CLOCKSOURCE_TCB). The driver initially triggers a reset-to-zero of the two timers but this reset is only performed on the next rising clock. For the first timer this is ok - it will be in the next 60ns (16MHz clock). For the chained second timer this will only happen after the first timer overflows, i.e. after 2^16 clocks (~4ms with a 16MHz clock). So with other words the scheduler clock resets to 0 after the first 2^16 clock cycles. It looks like that the scheduler does not like this and behaves wrongly over its lifetime, e.g. some tasks are scheduled with a long delay. Why that is and if there are additional requirements for this behaviour has not been further analysed. There is a simple fix for resetting the second timer as well when the first timer is reset and this is to set the ATMEL_TC_ASWTRG_SET bit in the Channel Mode register (CMR) of the first timer. This will also rise the TIOA line (clock input of the second timer) when a software trigger respective SYNC is issued. Signed-off-by: Ronald Wahl <ronald.wahl@raritan.com> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20231007161803.31342-1-rwahl@gmx.de Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 6d3bc4c02d59996d1d3180d8ed409a9d7d5900e0 ]

On SAM9 hardware two cascaded 16 bit timers are used to form a 32 bit
high resolution timer that is used as scheduler clock when the kernel
has been configured that way (CONFIG_ATMEL_CLOCKSOURCE_TCB).

The driver initially triggers a reset-to-zero of the two timers but this
reset is only performed on the next rising clock. For the first timer
this is ok - it will be in the next 60ns (16MHz clock). For the chained
second timer this will only happen after the first timer overflows, i.e.
after 2^16 clocks (~4ms with a 16MHz clock). So with other words the
scheduler clock resets to 0 after the first 2^16 clock cycles.

It looks like that the scheduler does not like this and behaves wrongly
over its lifetime, e.g. some tasks are scheduled with a long delay. Why
that is and if there are additional requirements for this behaviour has
not been further analysed.

There is a simple fix for resetting the second timer as well when the
first timer is reset and this is to set the ATMEL_TC_ASWTRG_SET bit in
the Channel Mode register (CMR) of the first timer. This will also rise
the TIOA line (clock input of the second timer) when a software trigger
respective SYNC is issued.

Signed-off-by: Ronald Wahl <ronald.wahl@raritan.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20231007161803.31342-1-rwahl@gmx.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
clocksource/drivers/timer-imx-gpt: Fix potential memory leak 2023-11-28T16:45:42+00:00 Jacky Bai ping.bai@nxp.com 2023-10-09T08:39:22+00:00 f3b3cdfb6144da785ddc09e2b0aaed8af4f9e7ef [ Upstream commit 8051a993ce222a5158bccc6ac22ace9253dd71cb ] Fix coverity Issue CID 250382: Resource leak (RESOURCE_LEAK). Add kfree when error return. Signed-off-by: Jacky Bai <ping.bai@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20231009083922.1942971-1-ping.bai@nxp.com Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 8051a993ce222a5158bccc6ac22ace9253dd71cb ]

Fix coverity Issue CID 250382:  Resource leak (RESOURCE_LEAK).
Add kfree when error return.

Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20231009083922.1942971-1-ping.bai@nxp.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
clocksource/drivers/sp804: Avoid error on multiple instances 2022-06-14T14:54:00+00:00 Andre Przywara andre.przywara@arm.com 2022-05-06T16:25:22+00:00 3ba2db7cc27d4f69c1feebd0691f933e7a125542 [ Upstream commit a98399cbc1e05f7b977419f03905501d566cf54e ] When a machine sports more than one SP804 timer instance, we only bring up the first one, since multiple timers of the same kind are not useful to Linux. As this is intentional behaviour, we should not return an error message, as we do today: =============== [ 0.000800] Failed to initialize '/bus@8000000/motherboard-bus@8000000/iofpga-bus@300000000/timer@120000': -22 =============== Replace the -EINVAL return with a debug message and return 0 instead. Also we do not reach the init function anymore if the DT node is disabled (as this is now handled by OF_DECLARE), so remove the explicit check for that case. This fixes a long standing bogus error when booting ARM's fastmodels. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/20220506162522.3675399-1-andre.przywara@arm.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit a98399cbc1e05f7b977419f03905501d566cf54e ]

When a machine sports more than one SP804 timer instance, we only bring
up the first one, since multiple timers of the same kind are not useful
to Linux. As this is intentional behaviour, we should not return an
error message, as we do today:
===============
[    0.000800] Failed to initialize '/bus@8000000/motherboard-bus@8000000/iofpga-bus@300000000/timer@120000': -22
===============

Replace the -EINVAL return with a debug message and return 0 instead.

Also we do not reach the init function anymore if the DT node is
disabled (as this is now handled by OF_DECLARE), so remove the explicit
check for that case.

This fixes a long standing bogus error when booting ARM's fastmodels.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20220506162522.3675399-1-andre.przywara@arm.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
clocksource/drivers/oxnas-rps: Fix irq_of_parse_and_map() return value 2022-06-14T14:53:57+00:00 Krzysztof Kozlowski krzysztof.kozlowski@linaro.org 2022-04-22T10:41:01+00:00 c73d6e3cc33c6b48e0c9f12440cdaaabfe12fcdf [ Upstream commit 9c04a8ff03def4df3f81219ffbe1ec9b44ff5348 ] The irq_of_parse_and_map() returns 0 on failure, not a negative ERRNO. Fixes: 89355274e1f7 ("clocksource/drivers/oxnas-rps: Add Oxford Semiconductor RPS Dual Timer") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20220422104101.55754-1-krzysztof.kozlowski@linaro.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 9c04a8ff03def4df3f81219ffbe1ec9b44ff5348 ]

The irq_of_parse_and_map() returns 0 on failure, not a negative ERRNO.

Fixes: 89355274e1f7 ("clocksource/drivers/oxnas-rps: Add Oxford Semiconductor RPS Dual Timer")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20220422104101.55754-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
clocksource: acpi_pm: fix return value of __setup handler 2022-04-20T07:08:13+00:00 Randy Dunlap rdunlap@infradead.org 2022-03-17T15:39:39+00:00 54aa7c1ea23c0c785a2da7070691397b4e996d8c [ Upstream commit 6a861abceecb68497dd82a324fee45a5332dcece ] __setup() handlers should return 1 to obsolete_checksetup() in init/main.c to indicate that the boot option has been handled. A return of 0 causes the boot option/value to be listed as an Unknown kernel parameter and added to init's (limited) environment strings. The __setup() handler interface isn't meant to handle negative return values -- they are non-zero, so they mean "handled" (like a return value of 1 does), but that's just a quirk. So return 1 from parse_pmtmr(). Also print a warning message if kstrtouint() returns an error. Fixes: 6b148507d3d0 ("pmtmr: allow command line override of ioport") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru> Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 6a861abceecb68497dd82a324fee45a5332dcece ]

__setup() handlers should return 1 to obsolete_checksetup() in
init/main.c to indicate that the boot option has been handled.
A return of 0 causes the boot option/value to be listed as an Unknown
kernel parameter and added to init's (limited) environment strings.

The __setup() handler interface isn't meant to handle negative return
values -- they are non-zero, so they mean "handled" (like a return
value of 1 does), but that's just a quirk. So return 1 from
parse_pmtmr(). Also print a warning message if kstrtouint() returns
an error.

Fixes: 6b148507d3d0 ("pmtmr: allow command line override of ioport")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
arm64: arch_timer: Add workaround for ARM erratum 1188873 2022-04-02T10:41:08+00:00 Marc Zyngier marc.zyngier@arm.com 2022-03-31T18:33:34+00:00 9aeb4a5a73d392580a2f5ee018dfe5506a2e8359 commit 95b861a4a6d94f64d5242605569218160ebacdbe upstream. When running on Cortex-A76, a timer access from an AArch32 EL0 task may end up with a corrupted value or register. The workaround for this is to trap these accesses at EL1/EL2 and execute them there. This only affects versions r0p0, r1p0 and r2p0 of the CPU. Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: James Morse <james.morse@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 95b861a4a6d94f64d5242605569218160ebacdbe upstream.

When running on Cortex-A76, a timer access from an AArch32 EL0
task may end up with a corrupted value or register. The workaround for
this is to trap these accesses at EL1/EL2 and execute them there.

This only affects versions r0p0, r1p0 and r2p0 of the CPU.

Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
clocksource/drivers/sh_cmt: Fix wrong setting if don't request IRQ for clock source channel 2021-09-22T09:45:19+00:00 Phong Hoang phong.hoang.wz@renesas.com 2021-04-22T12:34:43+00:00 2b092e08d77c9eb1e70b926c5376d6cf44b1382f [ Upstream commit be83c3b6e7b8ff22f72827a613bf6f3aa5afadbb ] If CMT instance has at least two channels, one channel will be used as a clock source and another one used as a clock event device. In that case, IRQ is not requested for clock source channel so sh_cmt_clock_event_program_verify() might work incorrectly. Besides, when a channel is only used for clock source, don't need to re-set the next match_value since it should be maximum timeout as it still is. On the other hand, due to no IRQ, total_cycles is not counted up when reaches compare match time (timer counter resets to zero), so sh_cmt_clocksource_read() returns unexpected value. Therefore, use 64-bit clocksoure's mask for 32-bit or 16-bit variants will also lead to wrong delta calculation. Hence, this mask should correspond to timer counter width, and above function just returns the raw value of timer counter register. Fixes: bfa76bb12f23 ("clocksource: sh_cmt: Request IRQ for clock event device only") Fixes: 37e7742c55ba ("clocksource/drivers/sh_cmt: Fix clocksource width for 32-bit machines") Signed-off-by: Phong Hoang <phong.hoang.wz@renesas.com> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210422123443.73334-1-niklas.soderlund+renesas@ragnatech.se Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit be83c3b6e7b8ff22f72827a613bf6f3aa5afadbb ]

If CMT instance has at least two channels, one channel will be used
as a clock source and another one used as a clock event device.
In that case, IRQ is not requested for clock source channel so
sh_cmt_clock_event_program_verify() might work incorrectly.
Besides, when a channel is only used for clock source, don't need to
re-set the next match_value since it should be maximum timeout as
it still is.

On the other hand, due to no IRQ, total_cycles is not counted up
when reaches compare match time (timer counter resets to zero),
so sh_cmt_clocksource_read() returns unexpected value.
Therefore, use 64-bit clocksoure's mask for 32-bit or 16-bit variants
will also lead to wrong delta calculation. Hence, this mask should
correspond to timer counter width, and above function just returns
the raw value of timer counter register.

Fixes: bfa76bb12f23 ("clocksource: sh_cmt: Request IRQ for clock event device only")
Fixes: 37e7742c55ba ("clocksource/drivers/sh_cmt: Fix clocksource width for 32-bit machines")
Signed-off-by: Phong Hoang <phong.hoang.wz@renesas.com>
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210422123443.73334-1-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Sasha Levin <sashal@kernel.org>
clocksource/drivers/mxs_timer: Add missing semicolon when DEBUG is defined 2021-03-03T17:22:45+00:00 Tom Rix trix@redhat.com 2021-01-18T21:19:55+00:00 fe25fe09421eee24b22bd3da94e9a54720fb6ceb [ Upstream commit 7da390694afbaed8e0f05717a541dfaf1077ba51 ] When DEBUG is defined this error occurs drivers/clocksource/mxs_timer.c:138:1: error: expected ‘;’ before ‘}’ token The preceding statement needs a semicolon. Replace pr_info() with pr_debug() and remove the unneeded ifdef. Fixes: eb8703e2ef7c ("clockevents/drivers/mxs: Migrate to new 'set-state' interface") Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210118211955.763609-1-trix@redhat.com Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 7da390694afbaed8e0f05717a541dfaf1077ba51 ]

When DEBUG is defined this error occurs

drivers/clocksource/mxs_timer.c:138:1: error:
  expected ‘;’ before ‘}’ token

The preceding statement needs a semicolon.
Replace pr_info() with pr_debug() and remove the unneeded ifdef.

Fixes: eb8703e2ef7c ("clockevents/drivers/mxs: Migrate to new 'set-state' interface")
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210118211955.763609-1-trix@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
clocksource/drivers/arm_arch_timer: Correct fault programming of CNTKCTL_EL1.EVNTI 2020-12-29T12:46:59+00:00 Keqian Zhu zhukeqian1@huawei.com 2020-12-04T07:31:26+00:00 290a79f8afdd6ded217f3d5981c3c10143c4d551 [ Upstream commit 8b7770b877d187bfdae1eaf587bd2b792479a31c ] ARM virtual counter supports event stream, it can only trigger an event when the trigger bit (the value of CNTKCTL_EL1.EVNTI) of CNTVCT_EL0 changes, so the actual period of event stream is 2^(cntkctl_evnti + 1). For example, when the trigger bit is 0, then virtual counter trigger an event for every two cycles. While we're at it, rework the way we compute the trigger bit position by making it more obvious that when bits [n:n-1] are both set (with n being the most significant bit), we pick bit (n + 1). Fixes: 037f637767a8 ("drivers: clocksource: add support for ARM architected timer event stream") Suggested-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com> Acked-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20201204073126.6920-3-zhukeqian1@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 8b7770b877d187bfdae1eaf587bd2b792479a31c ]

ARM virtual counter supports event stream, it can only trigger an event
when the trigger bit (the value of CNTKCTL_EL1.EVNTI) of CNTVCT_EL0 changes,
so the actual period of event stream is 2^(cntkctl_evnti + 1). For example,
when the trigger bit is 0, then virtual counter trigger an event for every
two cycles.

While we're at it, rework the way we compute the trigger bit position
by making it more obvious that when bits [n:n-1] are both set (with n
being the most significant bit), we pick bit (n + 1).

Fixes: 037f637767a8 ("drivers: clocksource: add support for ARM architected timer event stream")
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20201204073126.6920-3-zhukeqian1@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
clocksource/drivers/cadence_ttc: Fix memory leak in ttc_setup_clockevent() 2020-12-29T12:46:58+00:00 Yu Kuai yukuai3@huawei.com 2020-11-16T13:51:23+00:00 6b909b090c9a96147bd0217d06886a003a8fb058 [ Upstream commit eee422c46e6840a81c9db18a497b74387a557b29 ] If clk_notifier_register() failed, ttc_setup_clockevent() will return without freeing 'ttcce', which will leak memory. Fixes: 70504f311d4b ("clocksource/drivers/cadence_ttc: Convert init function to return error") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yu Kuai <yukuai3@huawei.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20201116135123.2164033-1-yukuai3@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit eee422c46e6840a81c9db18a497b74387a557b29 ]

If clk_notifier_register() failed, ttc_setup_clockevent() will return
without freeing 'ttcce', which will leak memory.

Fixes: 70504f311d4b ("clocksource/drivers/cadence_ttc: Convert init function to return error")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20201116135123.2164033-1-yukuai3@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>