linux-stable.git/drivers/clocksource/timer-riscv.c, branch linux-5.4.y

Revert "clocksource/drivers/riscv: Events are stopped during CPU suspend"

2022-12-08T10:23:06+00:00

[ Upstream commit d9f15a9de44affe733e34f93bc184945ba277e6d ]

This reverts commit 232ccac1bd9b5bfe73895f527c08623e7fa0752d.

On the subject of suspend, the RISC-V SBI spec states:

  This does not cover whether any given events actually reach the hart or
  not, just what the hart will do if it receives an event. On PolarFire
  SoC, and potentially other SiFive based implementations, events from the
  RISC-V timer do reach a hart during suspend. This is not the case for the
  implementation on the Allwinner D1 - there timer events are not received
  during suspend.

To fix this, the CLOCK_EVT_FEAT_C3STOP (mis)feature was enabled for the
timer driver - but this has broken both RCU stall detection and timers
generally on PolarFire SoC and potentially other SiFive based
implementations.

If an AXI read to the PCIe controller on PolarFire SoC times out, the
system will stall, however, with CLOCK_EVT_FEAT_C3STOP active, the system
just locks up without RCU stalling:

	io scheduler mq-deadline registered
	io scheduler kyber registered
	microchip-pcie 2000000000.pcie: host bridge /soc/pcie@2000000000 ranges:
	microchip-pcie 2000000000.pcie:      MEM 0x2008000000..0x2087ffffff -> 0x0008000000
	microchip-pcie 2000000000.pcie: sec error in pcie2axi buffer
	microchip-pcie 2000000000.pcie: ded error in pcie2axi buffer
	microchip-pcie 2000000000.pcie: axi read request error
	microchip-pcie 2000000000.pcie: axi read timeout
	microchip-pcie 2000000000.pcie: sec error in pcie2axi buffer
	microchip-pcie 2000000000.pcie: ded error in pcie2axi buffer
	microchip-pcie 2000000000.pcie: sec error in pcie2axi buffer
	microchip-pcie 2000000000.pcie: ded error in pcie2axi buffer
	microchip-pcie 2000000000.pcie: sec error in pcie2axi buffer
	microchip-pcie 2000000000.pcie: ded error in pcie2axi buffer
	Freeing initrd memory: 7332K

Similarly issues were reported with clock_nanosleep() - with a test app
that sleeps each cpu for 6, 5, 4, 3 ms respectively, HZ=250 & the blamed
commit in place, the sleep times are rounded up to the next jiffy:

== CPU: 1 ==      == CPU: 2 ==      == CPU: 3 ==      == CPU: 4 ==
Mean: 7.974992    Mean: 7.976534    Mean: 7.962591    Mean: 3.952179
Std Dev: 0.154374 Std Dev: 0.156082 Std Dev: 0.171018 Std Dev: 0.076193
Hi: 9.472000      Hi: 10.495000     Hi: 8.864000      Hi: 4.736000
Lo: 6.087000      Lo: 6.380000      Lo: 4.872000      Lo: 3.403000
Samples: 521      Samples: 521      Samples: 521      Samples: 521

Fortunately, the D1 has a second timer, which is "currently used in
preference to the RISC-V/SBI timer driver" so a revert here does not
hurt operation of D1 in its current form.

Ultimately, a DeviceTree property (or node) will be added to encode the
behaviour of the timers, but until then revert the addition of
CLOCK_EVT_FEAT_C3STOP.

Fixes: 232ccac1bd9b ("clocksource/drivers/riscv: Events are stopped during CPU suspend")
Signed-off-by: Conor Dooley 
Signed-off-by: Thomas Gleixner 
Reviewed-by: Palmer Dabbelt 
Acked-by: Palmer Dabbelt 
Acked-by: Samuel Holland 
Link: https://lore.kernel.org/linux-riscv/YzYTNQRxLr7Q9JR0@spud/
Link: https://github.com/riscv-non-isa/riscv-sbi-doc/issues/98/
Link: https://lore.kernel.org/linux-riscv/bf6d3b1f-f703-4a25-833e-972a44a04114@sholland.org/
Link: https://lore.kernel.org/r/20221122121620.3522431-1-conor.dooley@microchip.com
Signed-off-by: Sasha Levin

clocksource/drivers/riscv: Events are stopped during CPU suspend

2022-06-14T16:11:53+00:00

[ Upstream commit 232ccac1bd9b5bfe73895f527c08623e7fa0752d ]

Some implementations of the SBI time extension depend on hart-local
state (for example, CSRs) that are lost or hardware that is powered
down when a CPU is suspended. To be safe, the clockevents driver
cannot assume that timer IRQs will be received during CPU suspend.

Fixes: 62b019436814 ("clocksource: new RISC-V SBI timer driver")
Signed-off-by: Samuel Holland 
Reviewed-by: Anup Patel 
Link: https://lore.kernel.org/r/20220509012121.40031-1-samuel@sholland.org
Signed-off-by: Daniel Lezcano 
Signed-off-by: Sasha Levin

clocksource: riscv: add notrace to riscv_sched_clock

2020-01-09T09:19:59+00:00

commit 9d05c18e8d7de566ff68f221fcae65e78708dd1d upstream.

When enabling ftrace graph tracer, it gets the tracing clock in
ftrace_push_return_trace().  Eventually, it invokes riscv_sched_clock()
to get the clock value.  If riscv_sched_clock() isn't marked with
'notrace', it will call ftrace_push_return_trace() and cause infinite
loop.

The result of failure as follow:

command: echo function_graph >current_tracer
[   46.176787] Unable to handle kernel paging request at virtual address ffffffe04fb38c48
[   46.177309] Oops [#1]
[   46.177478] Modules linked in:
[   46.177770] CPU: 0 PID: 256 Comm: $d Not tainted 5.5.0-rc1 #47
[   46.177981] epc: ffffffe00035e59a ra : ffffffe00035e57e sp : ffffffe03a7569b0
[   46.178216]  gp : ffffffe000d29b90 tp : ffffffe03a756180 t0 : ffffffe03a756968
[   46.178430]  t1 : ffffffe00087f408 t2 : ffffffe03a7569a0 s0 : ffffffe03a7569f0
[   46.178643]  s1 : ffffffe00087f408 a0 : 0000000ac054cda4 a1 : 000000000087f411
[   46.178856]  a2 : 0000000ac054cda4 a3 : 0000000000373ca0 a4 : ffffffe04fb38c48
[   46.179099]  a5 : 00000000153e22a8 a6 : 00000000005522ff a7 : 0000000000000005
[   46.179338]  s2 : ffffffe03a756a90 s3 : ffffffe00032811c s4 : ffffffe03a756a58
[   46.179570]  s5 : ffffffe000d29fe0 s6 : 0000000000000001 s7 : 0000000000000003
[   46.179809]  s8 : 0000000000000003 s9 : 0000000000000002 s10: 0000000000000004
[   46.180053]  s11: 0000000000000000 t3 : 0000003fc815749c t4 : 00000000000efc90
[   46.180293]  t5 : ffffffe000d29658 t6 : 0000000000040000
[   46.180482] status: 0000000000000100 badaddr: ffffffe04fb38c48 cause: 000000000000000f

Signed-off-by: Zong Li 
Reviewed-by: Steven Rostedt (VMware) 
[paul.walmsley@sifive.com: cleaned up patch description]
Fixes: 92e0d143fdef ("clocksource/drivers/riscv_timer: Provide the sched_clock")
Cc: stable@vger.kernel.org
Signed-off-by: Paul Walmsley 
Signed-off-by: Greg Kroah-Hartman

riscv: don't use the rdtime(h) pseudo-instructions

2019-09-05T08:52:46+00:00

If we just use the CSRs that these map to directly the code is simpler
and doesn't require extra inline assembly code.  Also fix up the top-level
comment in timer-riscv.c to not talk about the cycle count or mention
details of the clocksource interface, of which this file is just a
consumer.

Signed-off-by: Christoph Hellwig 
Reviewed-by: Atish Patra 
Signed-off-by: Paul Walmsley

RISC-V: Remove per cpu clocksource

2019-08-06T21:37:58+00:00

There is only one clocksource in RISC-V. The boot cpu initializes
that clocksource. No need to keep a percpu data structure.

Signed-off-by: Atish Patra 
Signed-off-by: Paul Walmsley 
Acked-by: Daniel Lezcano

clocksource/drivers/riscv: Fix clocksource mask

2019-03-23T11:25:34+00:00

For all riscv architectures (RV32, RV64 and RV128), the clocksource
is a 64 bit incrementing counter.

Fix the clock source mask accordingly.

Tested on both 64bit and 32 bit virt machine in QEMU.

Fixes: 62b019436814 ("clocksource: new RISC-V SBI timer driver")
Signed-off-by: Atish Patra 
Signed-off-by: Thomas Gleixner 
Reviewed-by: Anup Patel 
Cc: Albert Ou 
Cc: Daniel Lezcano 
Cc: linux-riscv@lists.infradead.org
Cc: Palmer Dabbelt 
Cc: Anup Patel 
Cc: Damien Le Moal 
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20190322215411.19362-1-atish.patra@wdc.com

clocksource/drivers/riscv: Add required checks during clock source init

2019-02-23T11:13:45+00:00

Currently, clocksource registration happens for an invalid cpu for
non-smp kernels. This lead to kernel panic as cpu hotplug registration
will fail for those cpus. Moreover, riscv_hartid_to_cpuid can return
errors now.

Do not proceed if hartid or cpuid is invalid. Take this opportunity to
print appropriate error strings for different failure cases.

Signed-off-by: Atish Patra 
Reviewed-by: Anup Patel 
Reviewed-by: Palmer Dabbelt 
Signed-off-by: Daniel Lezcano

clocksource/drivers/riscv: Change name riscv_timer to timer-riscv

2018-12-18T21:22:23+00:00

In order to unify the names in this directory, let's rename the driver to be
prefixed with timer-*

Reviewed-by: Palmer Dabbelt 
Signed-off-by: Daniel Lezcano