linux-stable.git/drivers/clocksource/qcom-timer.c, branch master

clocksource/drivers: Unify the names to timer-* format

2018-10-03T12:37:02+00:00

In order to make some housekeeping in the directory, this patch renames
drivers to the timer-* format in order to unify their names.

There is no functional changes.

Acked-by: Uwe Kleine-König 
Acked-by: Vladimir Zapolskiy 
Acked-by: Liviu Dudau 

Signed-off-by: Daniel Lezcano

clocksource/drivers: Rename CLOCKSOURCE_OF_DECLARE to TIMER_OF_DECLARE

2017-06-14T09:58:45+00:00

The CLOCKSOURCE_OF_DECLARE macro is used widely for the timers to declare the
clocksource at early stage. However, this macro is also used to initialize
the clockevent if any, or the clockevent only.

It was originally suggested to declare another macro to initialize a
clockevent, so in order to separate the two entities even they belong to the
same IP. This was not accepted because of the impact on the DT where splitting
a clocksource/clockevent definition does not make sense as it is a Linux
concept not a hardware description.

On the other side, the clocksource has not interrupt declared while the
clockevent has, so it is easy from the driver to know if the description is
for a clockevent or a clocksource, IOW it could be implemented at the driver
level.

So instead of dealing with a named clocksource macro, let's use a more generic
one: TIMER_OF_DECLARE.

The patch has not functional changes.

Signed-off-by: Daniel Lezcano 
Acked-by: Heiko Stuebner 
Acked-by: Neil Armstrong 
Acked-by: Arnd Bergmann 
Acked-by: Matthias Brugger 
Reviewed-by: Linus Walleij

Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2016-12-25T22:30:04+00:00

Pull timer type cleanups from Thomas Gleixner:
 "This series does a tree wide cleanup of types related to
  timers/timekeeping.

   - Get rid of cycles_t and use a plain u64. The type is not really
     helpful and caused more confusion than clarity

   - Get rid of the ktime union. The union has become useless as we use
     the scalar nanoseconds storage unconditionally now. The 32bit
     timespec alike storage got removed due to the Y2038 limitations
     some time ago.

     That leaves the odd union access around for no reason. Clean it up.

  Both changes have been done with coccinelle and a small amount of
  manual mopping up"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  ktime: Get rid of ktime_equal()
  ktime: Cleanup ktime_set() usage
  ktime: Get rid of the union
  clocksource: Use a plain u64 instead of cycle_t

clocksource: Use a plain u64 instead of cycle_t

2016-12-25T10:04:12+00:00

There is no point in having an extra type for extra confusion. u64 is
unambiguous.

Conversion was done with the following coccinelle script:

@rem@
@@
-typedef u64 cycle_t;

@fix@
typedef cycle_t;
@@
-cycle_t
+u64

Signed-off-by: Thomas Gleixner 
Cc: Peter Zijlstra 
Cc: John Stultz

cpu/hotplug: Cleanup state names

2016-12-25T09:47:44+00:00

When the state names got added a script was used to add the extra argument
to the calls. The script basically converted the state constant to a
string, but the cleanup to convert these strings into meaningful ones did
not happen.

Replace all the useless strings with 'subsys/xxx/yyy:state' strings which
are used in all the other places already.

Signed-off-by: Thomas Gleixner 
Cc: Peter Zijlstra 
Cc: Sebastian Siewior 
Link: http://lkml.kernel.org/r/20161221192112.085444152@linutronix.de
Signed-off-by: Thomas Gleixner

clocksource/qcom-timer: Convert to hotplug state machine

2016-07-15T08:40:25+00:00

Install the callbacks via the state machine and let the core invoke
the callbacks on the already online CPUs.

Signed-off-by: Richard Cochran 
Signed-off-by: Anna-Maria Gleixner 
Reviewed-by: Sebastian Andrzej Siewior 
Cc: Daniel Lezcano 
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Cc: rt@linutronix.de
Link: http://lkml.kernel.org/r/20160713153336.295486558@linutronix.de
Signed-off-by: Ingo Molnar

clocksources: Switch back to the clksrc table

2016-06-28T08:19:35+00:00

All the clocksource drivers's init function are now converted to return
an error code. CLOCKSOURCE_OF_DECLARE is no longer used as well as the
clksrc-of table.

Let's convert back the names:
 - CLOCKSOURCE_OF_DECLARE_RET => CLOCKSOURCE_OF_DECLARE
 - clksrc-of-ret              => clksrc-of

Signed-off-by: Daniel Lezcano 

For exynos_mct and samsung_pwm_timer:
Acked-by: Krzysztof Kozlowski 

For arch/arc:
Acked-by: Vineet Gupta 

For mediatek driver:
Acked-by: Matthias Brugger 

For the Rockchip-part
Acked-by: Heiko Stuebner 

For STi :
Acked-by: Patrice Chotard 

For the mps2-timer.c and versatile.c changes:
Acked-by: Liviu Dudau 

For the OXNAS part :
Acked-by: Neil Armstrong 

For LPC32xx driver:
Acked-by: Sylvain Lemieux 

For Broadcom Kona timer change:
Acked-by: Ray Jui 

For Sun4i and Sun5i:
Acked-by: Chen-Yu Tsai 

For Meson6:
Acked-by: Carlo Caione 

For Keystone:
Acked-by: Santosh Shilimkar 

For NPS:
Acked-by: Noam Camus 

For bcm2835:
Acked-by: Eric Anholt

clocksource/drivers/qcom: Convert init function to return error

2016-06-28T08:19:25+00:00

The init functions do not return any error. They behave as the following:

  - panic, thus leading to a kernel crash while another timer may work and
       make the system boot up correctly

  or

  - print an error and let the caller unaware if the state of the system

Change that by converting the init functions to return an error conforming
to the CLOCKSOURCE_OF_RET prototype.

Proper error handling (rollback, errno value) will be changed later case
by case, thus this change just return back an error or success in the init
function.

Signed-off-by: Daniel Lezcano

clockevents/drivers/qcom: Migrate to new 'set-state' interface

2015-08-10T09:40:36+00:00

Migrate qcom driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

Periodic mode isn't supported by the driver and so the callback isn't
provided anymore.

Cc: Stephen Boyd 
Cc: Kumar Gala 
Cc: Andy Gross 
Cc: David Brown 
Signed-off-by: Viresh Kumar 
Signed-off-by: Daniel Lezcano 
Acked-by: Stephen Boyd

clocksource/drivers/qcom: Remove dead code

2015-06-02T10:10:08+00:00

This code is no longer used now that mach-msm has been removed.
Delete it.

Cc: David Brown 
Cc: Bryan Huntsman 
Cc: Daniel Walker 
Signed-off-by: Stephen Boyd 
Signed-off-by: Daniel Lezcano