linux-stable.git/drivers/clocksource/Kconfig, branch v5.8 Linux kernel stable tree clocksource: mips-gic-timer: Mark GIC timer as unstable if ref clock changes 2020-05-22T22:03:16+00:00 Serge Semin Sergey.Semin@baikalelectronics.ru 2020-05-21T20:48:17+00:00 7d7de1a65349811b24971c5e8e040e6aac192dd4 Currently clocksource framework doesn't support the clocks with variable frequency. Since MIPS GIC timer ticks rate might be unstable on some platforms, we must make sure that it justifies the clocksource requirements. MIPS GIC timer is incremented with the CPU cluster reference clocks rate. So in case if CPU frequency changes, the MIPS GIC tick rate changes synchronously. Due to this the clocksource subsystem can't rely on the timer to measure system clocks anymore. This commit marks the MIPS GIC based clocksource as unstable if reference clock (normally it's a CPU reference clocks) rate changes. The clocksource will execute a watchdog thread, which lowers the MIPS GIC timer rating to zero and fallbacks to a new stable one. Note we don't need to set the CLOCK_SOURCE_MUST_VERIFY flag to the MIPS GIC clocksource since normally the timer is stable. The only reason why it gets unstable is due to the ref clock rate change, which event we detect here in the driver by means of the clocks event notifier. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Paul Burton <paulburton@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@vger.kernel.org Cc: linux-rtc@vger.kernel.org Cc: devicetree@vger.kernel.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200521204818.25436-9-Sergey.Semin@baikalelectronics.ru 
Currently clocksource framework doesn't support the clocks with variable
frequency. Since MIPS GIC timer ticks rate might be unstable on some
platforms, we must make sure that it justifies the clocksource
requirements. MIPS GIC timer is incremented with the CPU cluster reference
clocks rate. So in case if CPU frequency changes, the MIPS GIC tick rate
changes synchronously. Due to this the clocksource subsystem can't rely on
the timer to measure system clocks anymore. This commit marks the MIPS GIC
based clocksource as unstable if reference clock (normally it's a CPU
reference clocks) rate changes. The clocksource will execute a watchdog
thread, which lowers the MIPS GIC timer rating to zero and fallbacks to a
new stable one.

Note we don't need to set the CLOCK_SOURCE_MUST_VERIFY flag to the MIPS
GIC clocksource since normally the timer is stable. The only reason why
it gets unstable is due to the ref clock rate change, which event we
detect here in the driver by means of the clocks event notifier.

Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-rtc@vger.kernel.org
Cc: devicetree@vger.kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200521204818.25436-9-Sergey.Semin@baikalelectronics.ru
clocksource/drivers/rda: drop redundant Kconfig dependency 2020-05-22T21:58:56+00:00 Johan Hovold johan@kernel.org 2020-05-13T12:25:48+00:00 83cba9536905e4f82b726a98fe404400f0c9eb76 Since commit 2f8a26c166eb ("clocksource: Improve GENERIC_CLOCKEVENTS dependency") all clocksource drivers depend on GENERIC_CLOCKEVENTS so drop the redundant attribute from the RDA-timer entry which was added later. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200513122548.16974-1-johan@kernel.org 
Since commit 2f8a26c166eb ("clocksource: Improve GENERIC_CLOCKEVENTS
dependency") all clocksource drivers depend on GENERIC_CLOCKEVENTS so
drop the redundant attribute from the RDA-timer entry which was added
later.

Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200513122548.16974-1-johan@kernel.org
clocksource/drivers/versatile: Allow CONFIG_CLKSRC_VERSATILE to be disabled 2020-04-27T09:33:44+00:00 Rob Herring robh@kernel.org 2020-04-17T21:20:45+00:00 bfed0eded1ce00bda5cc2d2939b017f88e6b1fd0 The timer-versatile driver provides a sched_clock for certain Arm Ltd. reference platforms. Specifically, it is used on Versatile and 32-bit VExpress. It is not needed for those platforms with an arch timer (all the 64-bit ones) yet CONFIG_MFD_VEXPRESS_SYSREG does still need to be enabled. In that case, the timer-versatile can only be disabled when COMPILE_TEST is enabled which is not desirable. Let's use the sub-arch kconfig symbols instead. Realview platforms don't have the sysregs that this driver uses so correct the help text. Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200417212045.16917-1-robh@kernel.org 
The timer-versatile driver provides a sched_clock for certain Arm Ltd.
reference platforms. Specifically, it is used on Versatile and 32-bit
VExpress. It is not needed for those platforms with an arch timer (all
the 64-bit ones) yet CONFIG_MFD_VEXPRESS_SYSREG does still need to be
enabled. In that case, the timer-versatile can only be disabled when
COMPILE_TEST is enabled which is not desirable. Let's use the sub-arch
kconfig symbols instead.

Realview platforms don't have the sysregs that this driver uses so
correct the help text.

Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200417212045.16917-1-robh@kernel.org
clocksource/drivers/timer-microchip-pit64b: Select CONFIG_TIMER_OF 2020-04-27T06:59:50+00:00 Michael Ellerman mpe@ellerman.id.au 2020-04-26T12:43:56+00:00 25259f7a5de2de9d67793dc584b15c83a3134c93 This driver is an OF driver, it depends on OF, and uses TIMER_OF_DECLARE, so it should select CONFIG_TIMER_OF. Without CONFIG_TIMER_OF enabled this can lead to warnings such as: powerpc-linux-ld: warning: orphan section `__timer_of_table' from `drivers/clocksource/timer-microchip-pit64b.o' being placed in section `__timer_of_table'. Because TIMER_OF_TABLES in vmlinux.lds.h doesn't emit anything into the linker script when CONFIG_TIMER_OF is not enabled. Fixes: 625022a5f160 ("clocksource/drivers/timer-microchip-pit64b: Add Microchip PIT64B support") Cc: stable@vger.kernel.org # v5.6+ Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200426124356.3929682-1-mpe@ellerman.id.au 
This driver is an OF driver, it depends on OF, and uses
TIMER_OF_DECLARE, so it should select CONFIG_TIMER_OF.

Without CONFIG_TIMER_OF enabled this can lead to warnings such as:

  powerpc-linux-ld: warning: orphan section `__timer_of_table' from
  `drivers/clocksource/timer-microchip-pit64b.o' being placed in
  section `__timer_of_table'.

Because TIMER_OF_TABLES in vmlinux.lds.h doesn't emit anything into
the linker script when CONFIG_TIMER_OF is not enabled.

Fixes: 625022a5f160 ("clocksource/drivers/timer-microchip-pit64b: Add Microchip PIT64B support")
Cc: stable@vger.kernel.org # v5.6+
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200426124356.3929682-1-mpe@ellerman.id.au
clocksource: Add driver for the Ingenic JZ47xx OST 2020-02-27T08:37:29+00:00 Maarten ter Huurne maarten@treewalker.org 2020-02-12T18:04:08+00:00 ca7b72b5a5f248b72c88441a93bdcee22f42b9b3 OST is the OS Timer, a 64-bit timer/counter with buffered reading. SoCs before the JZ4770 had (if any) a 32-bit OST; the JZ4770 and JZ4780 have a 64-bit OST. This driver will register both a clocksource and a sched_clock to the system. Signed-off-by: Maarten ter Huurne <maarten@treewalker.org> Signed-off-by: Paul Cercueil <paul@crapouillou.net> Tested-by: Mathieu Malaterre <malat@debian.org> Tested-by: Artur Rojek <contact@artur-rojek.eu> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200212180408.30872-1-paul@crapouillou.net 
OST is the OS Timer, a 64-bit timer/counter with buffered reading.

SoCs before the JZ4770 had (if any) a 32-bit OST; the JZ4770 and
JZ4780 have a 64-bit OST.

This driver will register both a clocksource and a sched_clock to the
system.

Signed-off-by: Maarten ter Huurne <maarten@treewalker.org>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: Mathieu Malaterre <malat@debian.org>
Tested-by: Artur Rojek <contact@artur-rojek.eu>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200212180408.30872-1-paul@crapouillou.net
clocksource/drivers/timer-microchip-pit64b: Add Microchip PIT64B support 2020-01-16T18:06:57+00:00 Claudiu Beznea claudiu.beznea@microchip.com 2019-12-13T11:19:21+00:00 625022a5f160619ae180d54097ddd65bb3795913 Add driver for Microchip PIT64B timer. Timer could be used in continuous mode or oneshot mode. The hardware has 2x32 bit registers for period emulating a 64 bit timer. The LSB_PR and MSB_PR registers are used to set the period value (compare value). TLSB and TMSB keeps the current value of the counter. After a compare the TLSB and TMSB register resets. The driver uses PIT64B timer for clocksource or clockevent. First requested timer would be registered as clockevent, second one would be registered as clocksource. Individual PIT64B hardware resources were used for clocksource and clockevent to be able to support high resolution timers with this hardware implementation. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1576235962-30123-3-git-send-email-claudiu.beznea@microchip.com 
Add driver for Microchip PIT64B timer. Timer could be used in continuous
mode or oneshot mode. The hardware has 2x32 bit registers for period
emulating a 64 bit timer. The LSB_PR and MSB_PR registers are used to
set the period value (compare value). TLSB and TMSB keeps the current
value of the counter. After a compare the TLSB and TMSB register resets.
The driver uses PIT64B timer for clocksource or clockevent. First
requested timer would be registered as clockevent, second one would be
registered as clocksource. Individual PIT64B hardware resources were
used for clocksource and clockevent to be able to support high resolution
timers with this hardware implementation.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/1576235962-30123-3-git-send-email-claudiu.beznea@microchip.com
clocksource: Fix Kconfig miscues 2020-01-16T18:06:57+00:00 Randy Dunlap rdunlap@infradead.org 2019-11-28T05:10:22+00:00 062934634dc3ae38baeb9961dcc80c44a00ffcf2 Fix lots of typo, spelling, punctuation, and grammar miscues in drivers/clocksource/Kconfig. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: John Stultz <john.stultz@linaro.org> Cc: Stephen Boyd <sboyd@kernel.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/4deb42a9-82f2-72f9-891f-972a9a399f4f@infradead.org 
Fix lots of typo, spelling, punctuation, and grammar miscues in
drivers/clocksource/Kconfig.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/4deb42a9-82f2-72f9-891f-972a9a399f4f@infradead.org
clocksource: Fix Kconfig indentation 2020-01-16T18:06:57+00:00 Krzysztof Kozlowski krzk@kernel.org 2019-11-20T13:42:36+00:00 9ca9fe69eedb483c0811a4db7cb94942edfb1404 Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20191120134236.15959-1-krzk@kernel.org 
Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
	$ sed -e 's/^        /\t/' -i */Kconfig

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20191120134236.15959-1-krzk@kernel.org
clocksource/drivers/renesas-ostm: Convert to timer_of 2019-11-04T09:38:46+00:00 Geert Uytterhoeven geert+renesas@glider.be 2019-10-16T14:47:46+00:00 227314239a5e87fb531cbf3bd8953b2d1d2694bd Convert the Renesas OSTM driver to use the timer_of framework. This reduces the driver object size by 367 bytes (with gcc 7.4.0). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20191016144747.29538-4-geert+renesas@glider.be 
Convert the Renesas OSTM driver to use the timer_of framework.
This reduces the driver object size by 367 bytes (with gcc 7.4.0).

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20191016144747.29538-4-geert+renesas@glider.be
Merge tag 'mips_5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux 2019-09-22T16:30:30+00:00 Linus Torvalds torvalds@linux-foundation.org 2019-09-22T16:30:30+00:00 5c6bd5de3c2e5bc8a17451e281ed2613375a7fd5 Pull MIPS updates from Paul Burton: "Main MIPS changes: - boot_mem_map is removed, providing a nice cleanup made possible by the recent removal of bootmem. - Some fixes to atomics, in general providing compiler barriers for smp_mb__{before,after}_atomic plus fixes specific to Loongson CPUs or MIPS32 systems using cmpxchg64(). - Conversion to the new generic VDSO infrastructure courtesy of Vincenzo Frascino. - Removal of undefined behavior in set_io_port_base(), fixing the behavior of some MIPS kernel configurations when built with recent clang versions. - Initial MIPS32 huge page support, functional on at least Ingenic SoCs. - pte_special() is now supported for some configurations, allowing among other things generic fast GUP to be used. - Miscellaneous fixes & cleanups. And platform specific changes: - Major improvements to Ingenic SoC support from Paul Cercueil, mostly enabled by the inclusion of the new TCU (timer-counter unit) drivers he's spent a very patient year or so working on. Plus some fixes for X1000 SoCs from Zhou Yanjie. - Netgear R6200 v1 systems are now supported by the bcm47xx platform. - DT updates for BMIPS, Lantiq & Microsemi Ocelot systems" * tag 'mips_5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (89 commits) MIPS: Detect bad _PFN_SHIFT values MIPS: Disable pte_special() for MIPS32 with RiXi MIPS: ralink: deactivate PCI support for SOC_MT7621 mips: compat: vdso: Use legacy syscalls as fallback MIPS: Drop Loongson _CACHE_* definitions MIPS: tlbex: Remove cpu_has_local_ebase MIPS: tlbex: Simplify r3k check MIPS: Select R3k-style TLB in Kconfig MIPS: PCI: refactor ioc3 special handling mips: remove ioremap_cachable mips/atomic: Fix smp_mb__{before,after}_atomic() mips/atomic: Fix loongson_llsc_mb() wreckage mips/atomic: Fix cmpxchg64 barriers MIPS: Octeon: remove duplicated include from dma-octeon.c firmware: bcm47xx_nvram: Allow COMPILE_TEST firmware: bcm47xx_nvram: Correct size_t printf format MIPS: Treat Loongson Extensions as ASEs MIPS: Remove dev_err() usage after platform_get_irq() MIPS: dts: mscc: describe the PTP ready interrupt MIPS: dts: mscc: describe the PTP register range ... 
Pull MIPS updates from Paul Burton:
 "Main MIPS changes:

   - boot_mem_map is removed, providing a nice cleanup made possible by
     the recent removal of bootmem.

   - Some fixes to atomics, in general providing compiler barriers for
     smp_mb__{before,after}_atomic plus fixes specific to Loongson CPUs
     or MIPS32 systems using cmpxchg64().

   - Conversion to the new generic VDSO infrastructure courtesy of
     Vincenzo Frascino.

   - Removal of undefined behavior in set_io_port_base(), fixing the
     behavior of some MIPS kernel configurations when built with recent
     clang versions.

   - Initial MIPS32 huge page support, functional on at least Ingenic
     SoCs.

   - pte_special() is now supported for some configurations, allowing
     among other things generic fast GUP to be used.

   - Miscellaneous fixes & cleanups.

  And platform specific changes:

   - Major improvements to Ingenic SoC support from Paul Cercueil,
     mostly enabled by the inclusion of the new TCU (timer-counter unit)
     drivers he's spent a very patient year or so working on. Plus some
     fixes for X1000 SoCs from Zhou Yanjie.

   - Netgear R6200 v1 systems are now supported by the bcm47xx platform.

   - DT updates for BMIPS, Lantiq & Microsemi Ocelot systems"

* tag 'mips_5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (89 commits)
  MIPS: Detect bad _PFN_SHIFT values
  MIPS: Disable pte_special() for MIPS32 with RiXi
  MIPS: ralink: deactivate PCI support for SOC_MT7621
  mips: compat: vdso: Use legacy syscalls as fallback
  MIPS: Drop Loongson _CACHE_* definitions
  MIPS: tlbex: Remove cpu_has_local_ebase
  MIPS: tlbex: Simplify r3k check
  MIPS: Select R3k-style TLB in Kconfig
  MIPS: PCI: refactor ioc3 special handling
  mips: remove ioremap_cachable
  mips/atomic: Fix smp_mb__{before,after}_atomic()
  mips/atomic: Fix loongson_llsc_mb() wreckage
  mips/atomic: Fix cmpxchg64 barriers
  MIPS: Octeon: remove duplicated include from dma-octeon.c
  firmware: bcm47xx_nvram: Allow COMPILE_TEST
  firmware: bcm47xx_nvram: Correct size_t printf format
  MIPS: Treat Loongson Extensions as ASEs
  MIPS: Remove dev_err() usage after platform_get_irq()
  MIPS: dts: mscc: describe the PTP ready interrupt
  MIPS: dts: mscc: describe the PTP register range
  ...