linux-stable.git/drivers/clocksource/Kconfig, branch v4.7 Linux kernel stable tree Merge tag 'arc-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc 2016-05-19T16:46:18+00:00 Linus Torvalds torvalds@linux-foundation.org 2016-05-19T16:46:18+00:00 0efacbbaee1e94e9942da0912f5b46ffd45a74bd Pull ARC updates from Vineet Gupta: "We have a relatively big changeset for ARC for 4.7. The highlight is support for EZChip (now Mellanox) NPS-400 network processor, a 400-Gb throughput C-programmable packet processor based on ARC700 cores from Synopsys. See http://www.mellanox.com/related-docs/prod_npu/PB_NPS-400.pdf Also present are irqchip and clocksource drivers for NPS as agreed with respective maintainers to go via ARC tree due to an soc header dependency. I have the needed ACKs from Jason, Marc, Daniel. You might run into a trivial merge conflict in drivers/irqchip/* This EZChip platform support required some deep changes in ARC architecture code and also opportunity to cleanup past sins (legacy irq domains, missing irq domain lookup, hard coded timer irqs...) Summary: - Support for EZChip (now Mellanox) NPS-400 Network processor based on ARC700 - NPS interrupt controller and clocksource drivers - ARC timers probed off DT - ARC iqrchips switching to linear domain (upgrade from legacy domains)" * tag 'arc-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: (37 commits) arc: axs103_smp: Fix CPU frequency to 100MHz for dual-core arc: axs10x: Add DT bindings for I2S PLL Clock ARC: pae: STRICT_MM_TYPECHECKS was broken ARC: Add eznps platform to Kconfig and Makefile ARC: [plat-eznps] Use dedicated COMMAND_LINE_SIZE ARC: [plat-eznps] Use dedicated cpu_relax() ARC: [plat-eznps] Use dedicated identity auxiliary register. ARC: [plat-eznps] Use dedicated SMP barriers ARC: [plat-eznps] Use dedicated atomic/bitops/cmpxchg ARC: [plat-eznps] Use dedicated user stack top ARC: [plat-eznps] Add eznps platform ARC: [plat-eznps] Add eznps board defconfig and dts ARC: Mark secondary cpu online only after all HW setup is done ARC: rwlock: disable interrupts in !LLSC variant ARC: Make vmalloc size configurable ARC: clean out UAPI byteorder.h clean off Kconfig symbol irqchip: add nps Internal and external irqchips clocksource: Add NPS400 timers driver soc: Support for EZchip SoC Documentation: Add EZchip vendor to binding list ... 
Pull ARC updates from Vineet Gupta:
 "We have a relatively big changeset for ARC for 4.7.

  The highlight is support for EZChip (now Mellanox) NPS-400 network
  processor, a 400-Gb throughput C-programmable packet processor based
  on ARC700 cores from Synopsys. See

        http://www.mellanox.com/related-docs/prod_npu/PB_NPS-400.pdf

  Also present are irqchip and clocksource drivers for NPS as agreed
  with respective maintainers to go via ARC tree due to an soc header
  dependency.  I have the needed ACKs from Jason, Marc, Daniel.  You
  might run into a trivial merge conflict in drivers/irqchip/*

  This EZChip platform support required some deep changes in ARC
  architecture code and also opportunity to cleanup past sins (legacy
  irq domains, missing irq domain lookup, hard coded timer irqs...)

  Summary:

   - Support for EZChip (now Mellanox) NPS-400 Network processor based
     on ARC700

   - NPS interrupt controller and clocksource drivers

   - ARC timers probed off DT

   - ARC iqrchips switching to linear domain (upgrade from legacy
     domains)"

* tag 'arc-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: (37 commits)
  arc: axs103_smp: Fix CPU frequency to 100MHz for dual-core
  arc: axs10x: Add DT bindings for I2S PLL Clock
  ARC: pae: STRICT_MM_TYPECHECKS was broken
  ARC: Add eznps platform to Kconfig and Makefile
  ARC: [plat-eznps] Use dedicated COMMAND_LINE_SIZE
  ARC: [plat-eznps] Use dedicated cpu_relax()
  ARC: [plat-eznps] Use dedicated identity auxiliary register.
  ARC: [plat-eznps] Use dedicated SMP barriers
  ARC: [plat-eznps] Use dedicated atomic/bitops/cmpxchg
  ARC: [plat-eznps] Use dedicated user stack top
  ARC: [plat-eznps] Add eznps platform
  ARC: [plat-eznps] Add eznps board defconfig and dts
  ARC: Mark secondary cpu online only after all HW setup is done
  ARC: rwlock: disable interrupts in !LLSC variant
  ARC: Make vmalloc size configurable
  ARC: clean out UAPI byteorder.h clean off Kconfig symbol
  irqchip: add nps Internal and external irqchips
  clocksource: Add NPS400 timers driver
  soc: Support for EZchip SoC
  Documentation: Add EZchip vendor to binding list
  ...
clocksource: Add NPS400 timers driver 2016-05-09T04:02:31+00:00 Noam Camus noamc@ezchip.com 2015-10-17T19:37:30+00:00 a53224577e317d010f61aa1b1b8b18f2b168a137 Add internal tick generator which is shared by all cores. Each cluster of cores view it through dedicated address. This is used for SMP system where all CPUs synced by same clock source. Signed-off-by: Noam Camus <noamc@ezchip.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: John Stultz <john.stultz@linaro.org> Acked-by: Vineet Gupta <vgupta@synopsys.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> 
Add internal tick generator which is shared by all cores.
Each cluster of cores view it through dedicated address.
This is used for SMP system where all CPUs synced by same
clock source.

Signed-off-by: Noam Camus <noamc@ezchip.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Acked-by: Vineet Gupta <vgupta@synopsys.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
clockevents/driversi/mps2: add MPS2 Timer driver 2016-04-28T13:09:06+00:00 Vladimir Murzin vladimir.murzin@arm.com 2016-04-25T08:45:44+00:00 0302637f1860400cfe0895e4355a5fecb89e0347 MPS2 platform has simple 32 bits general purpose countdown timers. The driver uses the first detected timer as a clocksource and the rest of the timers as a clockevent Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> 
MPS2 platform has simple 32 bits general purpose countdown timers.

The driver uses the first detected timer as a clocksource and the rest
of the timers as a clockevent

Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 2016-03-15T19:13:56+00:00 Linus Torvalds torvalds@linux-foundation.org 2016-03-15T19:13:56+00:00 8a284c062ec923c924c79e3b1b5199b8d72904fc Pull timer updates from Thomas Gleixner: "The timer department delivers this time: - Support for cross clock domain timestamps in the core code plus a first user. That allows more precise timestamping for PTP and later for audio and other peripherals. The ptp/e1000e patches have been acked by the relevant maintainers and are carried in the timer tree to avoid merge ordering issues. - Support for unregistering the current clocksource watchdog. That lifts a limitation for switching clocksources which has been there from day 1 - The usual pile of fixes and updates to the core and the drivers. Nothing outstanding and exciting" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (26 commits) time/timekeeping: Work around false positive GCC warning e1000e: Adds hardware supported cross timestamp on e1000e nic ptp: Add PTP_SYS_OFFSET_PRECISE for driver crosstimestamping x86/tsc: Always Running Timer (ART) correlated clocksource hrtimer: Revert CLOCK_MONOTONIC_RAW support time: Add history to cross timestamp interface supporting slower devices time: Add driver cross timestamp interface for higher precision time synchronization time: Remove duplicated code in ktime_get_raw_and_real() time: Add timekeeping snapshot code capturing system time and counter time: Add cycles to nanoseconds translation jiffies: Use CLOCKSOURCE_MASK instead of constant clocksource: Introduce clocksource_freq2mult() clockevents/drivers/exynos_mct: Implement ->set_state_oneshot_stopped() clockevents/drivers/arm_global_timer: Implement ->set_state_oneshot_stopped() clockevents/drivers/arm_arch_timer: Implement ->set_state_oneshot_stopped() clocksource/drivers/arm_global_timer: Register delay timer clocksource/drivers/lpc32xx: Support timer-based ARM delay clocksource/drivers/lpc32xx: Support periodic mode clocksource/drivers/lpc32xx: Don't use the prescaler counter for clockevents clocksource/drivers/rockchip: Add err handle for rk_timer_init ... 
Pull timer updates from Thomas Gleixner:
 "The timer department delivers this time:

   - Support for cross clock domain timestamps in the core code plus a
     first user.  That allows more precise timestamping for PTP and
     later for audio and other peripherals.

     The ptp/e1000e patches have been acked by the relevant maintainers
     and are carried in the timer tree to avoid merge ordering issues.

   - Support for unregistering the current clocksource watchdog.  That
     lifts a limitation for switching clocksources which has been there
     from day 1

   - The usual pile of fixes and updates to the core and the drivers.
     Nothing outstanding and exciting"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (26 commits)
  time/timekeeping: Work around false positive GCC warning
  e1000e: Adds hardware supported cross timestamp on e1000e nic
  ptp: Add PTP_SYS_OFFSET_PRECISE for driver crosstimestamping
  x86/tsc: Always Running Timer (ART) correlated clocksource
  hrtimer: Revert CLOCK_MONOTONIC_RAW support
  time: Add history to cross timestamp interface supporting slower devices
  time: Add driver cross timestamp interface for higher precision time synchronization
  time: Remove duplicated code in ktime_get_raw_and_real()
  time: Add timekeeping snapshot code capturing system time and counter
  time: Add cycles to nanoseconds translation
  jiffies: Use CLOCKSOURCE_MASK instead of constant
  clocksource: Introduce clocksource_freq2mult()
  clockevents/drivers/exynos_mct: Implement ->set_state_oneshot_stopped()
  clockevents/drivers/arm_global_timer: Implement ->set_state_oneshot_stopped()
  clockevents/drivers/arm_arch_timer: Implement ->set_state_oneshot_stopped()
  clocksource/drivers/arm_global_timer: Register delay timer
  clocksource/drivers/lpc32xx: Support timer-based ARM delay
  clocksource/drivers/lpc32xx: Support periodic mode
  clocksource/drivers/lpc32xx: Don't use the prescaler counter for clockevents
  clocksource/drivers/rockchip: Add err handle for rk_timer_init
  ...
clocksource/drivers/lpc32xx: Support timer-based ARM delay 2016-02-25T13:33:58+00:00 Ezequiel Garcia ezequiel@vanguardiasur.com.ar 2016-02-10T01:54:27+00:00 1b18fd2023acf7679a79d94ee85d488664ef0553 This commit implements the ARM timer-based delay timer for the LPC32xx, LPC18xx, LPC43xx family of SoCs. Also, add a dependency to restrict compiling this driver for the ARM architecture. Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Joachim Eastwood <manabian@gmail.com> Tested-by: Joachim Eastwood <manabian@gmail.com> 
This commit implements the ARM timer-based delay timer for the
LPC32xx, LPC18xx, LPC43xx family of SoCs.

Also, add a dependency to restrict compiling this driver for
the ARM architecture.

Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Joachim Eastwood <manabian@gmail.com>
Tested-by: Joachim Eastwood <manabian@gmail.com>
clocksource: Fix dependencies for archs w/o HAS_IOMEM 2016-01-26T15:26:07+00:00 Richard Weinberger richard@nod.at 2016-01-25T22:24:19+00:00 d7023e62c5128bf9f150d792a3ea8c758cb431a3 Not every arch has io memory. So, unbreak the build by fixing the dependencies. Signed-off-by: Richard Weinberger <richard@nod.at> Cc: user-mode-linux-devel@lists.sourceforge.net Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Link: http://lkml.kernel.org/r/1453760661-1444-21-git-send-email-richard@nod.at Signed-off-by: Thomas Gleixner <tglx@linutronix.de> 
Not every arch has io memory.
So, unbreak the build by fixing the dependencies.

Signed-off-by: Richard Weinberger <richard@nod.at>
Cc: user-mode-linux-devel@lists.sourceforge.net
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: http://lkml.kernel.org/r/1453760661-1444-21-git-send-email-richard@nod.at
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
clocksource: Select CLKSRC_MMIO where needed 2016-01-26T15:26:07+00:00 Arnd Bergmann arnd@arndb.de 2016-01-25T16:02:49+00:00 2be6d9bfef53d185975b44fd808aece36595e83e The Tegra clocksource implementation uses the clocksource_mmio helper functions, but currently can be configured without them, which fails: drivers/clocksource/built-in.o: In function `tegra20_init_timer': :(.init.text+0xac): undefined reference to `clocksource_mmio_init' :(.init.text+0x140): undefined reference to `clocksource_mmio_readl_up' The same problem exists for Digicolor: drivers/clocksource/built-in.o: In function `digicolor_timer_init': :(.init.text+0xfa): undefined reference to `clocksource_mmio_init' :(.init.text+0x14c): undefined reference to `clocksource_mmio_readl_down' I've inspected the Kconfig file to look for other cases that I have not yet run into, and added an explicit 'select' to each one to ensure we can successfully link the drivers. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: linux-arm-kernel@lists.infradead.org Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Link: http://lkml.kernel.org/r/1453737776-1960372-1-git-send-email-arnd@arndb.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de> 
The Tegra clocksource implementation uses the clocksource_mmio helper
functions, but currently can be configured without them, which fails:

drivers/clocksource/built-in.o: In function `tegra20_init_timer':
:(.init.text+0xac): undefined reference to `clocksource_mmio_init'
:(.init.text+0x140): undefined reference to `clocksource_mmio_readl_up'

The same problem exists for Digicolor:

drivers/clocksource/built-in.o: In function `digicolor_timer_init':
:(.init.text+0xfa): undefined reference to `clocksource_mmio_init'
:(.init.text+0x14c): undefined reference to `clocksource_mmio_readl_down'

I've inspected the Kconfig file to look for other cases that I have not
yet run into, and added an explicit 'select' to each one to ensure we
can successfully link the drivers.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: http://lkml.kernel.org/r/1453737776-1960372-1-git-send-email-arnd@arndb.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
clocksource/drivers/fsl_ftm_timer: Fix CLKSRC_MMIO dependency 2016-01-11T17:45:26+00:00 Daniel Lezcano daniel.lezcano@linaro.org 2016-01-08T13:21:31+00:00 03724ac3d48f8f0e3caf1d30fa134f8fd96c94e2 Select CLKSRC_MMIO when FSL_FTM_TIMER is enabled. Otherwise it fails to compile on i386 with COMPILE_TEST=y. " on i386: when CLKSRC_MMIO is not enabled: drivers/built-in.o: In function `ftm_timer_init': fsl_ftm_timer.c:(.init.text+0x6842): undefined reference to `clocksource_mmio_readl_up' fsl_ftm_timer.c:(.init.text+0x6855): undefined reference to `clocksource_mmio_init' " Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> 
Select CLKSRC_MMIO when FSL_FTM_TIMER is enabled. Otherwise it fails to
compile on i386 with COMPILE_TEST=y.

"
on i386:
when CLKSRC_MMIO is not enabled:

drivers/built-in.o: In function `ftm_timer_init':
fsl_ftm_timer.c:(.init.text+0x6842): undefined reference to `clocksource_mmio_readl_up'
fsl_ftm_timer.c:(.init.text+0x6855): undefined reference to `clocksource_mmio_init'
"

Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
clocksource/drivers: Fix dependencies for !HAS_IOMEM archs 2016-01-11T17:45:12+00:00 Richard Weinberger richard@nod.at 2016-01-02T22:06:36+00:00 863ee050726b67db82869e8e4221a7385a28b067 Not every arch has io memory. So, unbreak the build by fixing the dependencies. Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> 
Not every arch has io memory.

So, unbreak the build by fixing the dependencies.

Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
clocksource/drivers/tango-xtal: Replace code by clocksource_mmio_init 2015-12-15T09:12:17+00:00 Daniel Lezcano daniel.lezcano@linaro.org 2015-11-13T09:44:38+00:00 0881841f7e7863ba0d33d4c34ee284cde85e18c4 The current code to initialize, register and read the clocksource is already factored out in mmio.c via the clocksource_mmio_init function. Factor out the code with the clocksource_mmio_init function. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> 
The current code to initialize, register and read the clocksource is
already factored out in mmio.c via the clocksource_mmio_init function.

Factor out the code with the clocksource_mmio_init function.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>