linux-stable.git/drivers/clk, branch v6.9.7 Linux kernel stable tree clk: sifive: Do not register clkdevs for PRCI clocks 2024-06-21T12:40:17+00:00 Samuel Holland samuel.holland@sifive.com 2024-05-28T00:14:12+00:00 5d9192efa91bd804eee66f3bca31b039d37ac589 [ Upstream commit 2607133196c35f31892ee199ce7ffa717bea4ad1 ] These clkdevs were unnecessary, because systems using this driver always look up clocks using the devicetree. And as Russell King points out[1], since the provided device name was truncated, lookups via clkdev would never match. Recently, commit 8d532528ff6a ("clkdev: report over-sized strings when creating clkdev entries") caused clkdev registration to fail due to the truncation, and this now prevents the driver from probing. Fix the driver by removing the clkdev registration. Link: https://lore.kernel.org/linux-clk/ZkfYqj+OcAxd9O2t@shell.armlinux.org.uk/ [1] Fixes: 30b8e27e3b58 ("clk: sifive: add a driver for the SiFive FU540 PRCI IP block") Fixes: 8d532528ff6a ("clkdev: report over-sized strings when creating clkdev entries") Reported-by: Guenter Roeck <linux@roeck-us.net> Closes: https://lore.kernel.org/linux-clk/7eda7621-0dde-4153-89e4-172e4c095d01@roeck-us.net/ Suggested-by: Russell King <linux@armlinux.org.uk> Signed-off-by: Samuel Holland <samuel.holland@sifive.com> Link: https://lore.kernel.org/r/20240528001432.1200403-1-samuel.holland@sifive.com Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 2607133196c35f31892ee199ce7ffa717bea4ad1 ]

These clkdevs were unnecessary, because systems using this driver always
look up clocks using the devicetree. And as Russell King points out[1],
since the provided device name was truncated, lookups via clkdev would
never match.

Recently, commit 8d532528ff6a ("clkdev: report over-sized strings when
creating clkdev entries") caused clkdev registration to fail due to the
truncation, and this now prevents the driver from probing. Fix the
driver by removing the clkdev registration.

Link: https://lore.kernel.org/linux-clk/ZkfYqj+OcAxd9O2t@shell.armlinux.org.uk/ [1]
Fixes: 30b8e27e3b58 ("clk: sifive: add a driver for the SiFive FU540 PRCI IP block")
Fixes: 8d532528ff6a ("clkdev: report over-sized strings when creating clkdev entries")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Closes: https://lore.kernel.org/linux-clk/7eda7621-0dde-4153-89e4-172e4c095d01@roeck-us.net/
Suggested-by: Russell King <linux@armlinux.org.uk>
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20240528001432.1200403-1-samuel.holland@sifive.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
clk: qcom: apss-ipq-pll: use stromer ops for IPQ5018 to fix boot failure 2024-06-16T11:51:03+00:00 Gabor Juhos j4g8y7@gmail.com 2024-03-15T16:16:41+00:00 f53627403b9dc549db1a14fe5455ce2d2a98c963 commit 5fce38e2a1a97900989d9fedebcf5a4dacdaee30 upstream. Booting v6.8 results in a hang on various IPQ5018 based boards. Investigating the problem showed that the hang happens when the clk_alpha_pll_stromer_plus_set_rate() function tries to write into the PLL_MODE register of the APSS PLL. Checking the downstream code revealed that it uses [1] stromer specific operations for IPQ5018, whereas in the current code the stromer plus specific operations are used. The ops in the 'ipq_pll_stromer_plus' clock definition can't be changed since that is needed for IPQ5332, so add a new alpha pll clock declaration which uses the correct stromer ops and use this new clock for IPQ5018 to avoid the boot failure. Also, change pll_type in 'ipq5018_pll_data' to CLK_ALPHA_PLL_TYPE_STROMER to better reflect that it is a Stromer PLL and change the apss_ipq_pll_probe() function accordingly. 1. https://git.codelinaro.org/clo/qsdk/oss/kernel/linux-ipq-5.4/-/blob/NHSS.QSDK.12.4/drivers/clk/qcom/apss-ipq5018.c#L67 Cc: stable@vger.kernel.org Fixes: 50492f929486 ("clk: qcom: apss-ipq-pll: add support for IPQ5018") Signed-off-by: Gabor Juhos <j4g8y7@gmail.com> Tested-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com> Reviewed-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com> Link: https://lore.kernel.org/r/20240315-apss-ipq-pll-ipq5018-hang-v2-1-6fe30ada2009@gmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 5fce38e2a1a97900989d9fedebcf5a4dacdaee30 upstream.

Booting v6.8 results in a hang on various IPQ5018 based boards.
Investigating the problem showed that the hang happens when the
clk_alpha_pll_stromer_plus_set_rate() function tries to write
into the PLL_MODE register of the APSS PLL.

Checking the downstream code revealed that it uses [1] stromer
specific operations for IPQ5018, whereas in the current code
the stromer plus specific operations are used.

The ops in the 'ipq_pll_stromer_plus' clock definition can't be
changed since that is needed for IPQ5332, so add a new alpha pll
clock declaration which uses the correct stromer ops and use this
new clock for IPQ5018 to avoid the boot failure.

Also, change pll_type in 'ipq5018_pll_data' to
CLK_ALPHA_PLL_TYPE_STROMER to better reflect that it is a Stromer
PLL and change the apss_ipq_pll_probe() function accordingly.

1. https://git.codelinaro.org/clo/qsdk/oss/kernel/linux-ipq-5.4/-/blob/NHSS.QSDK.12.4/drivers/clk/qcom/apss-ipq5018.c#L67

Cc: stable@vger.kernel.org
Fixes: 50492f929486 ("clk: qcom: apss-ipq-pll: add support for IPQ5018")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Tested-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com>
Reviewed-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com>
Link: https://lore.kernel.org/r/20240315-apss-ipq-pll-ipq5018-hang-v2-1-6fe30ada2009@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
clk: qcom: clk-alpha-pll: fix rate setting for Stromer PLLs 2024-06-16T11:51:03+00:00 Gabor Juhos j4g8y7@gmail.com 2024-03-28T07:54:31+00:00 529c41d679ff1f48f80251e4f218704c6a3a0bf0 commit 3c5b3e17b8fd1f1add5a9477306c355fab126977 upstream. The clk_alpha_pll_stromer_set_rate() function writes inproper values into the ALPHA_VAL{,_U} registers which results in wrong clock rates when the alpha value is used. The broken behaviour can be seen on IPQ5018 for example, when dynamic scaling sets the CPU frequency to 800000 KHz. In this case the CPU cores are running only at 792031 KHz: # cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq 800000 # cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq 792031 This happens because the function ignores the fact that the alpha value calculated by the alpha_pll_round_rate() function is only 32 bits wide which must be extended to 40 bits if it is used on a hardware which supports 40 bits wide values. Extend the clk_alpha_pll_stromer_set_rate() function to convert the alpha value to 40 bits before wrinting that into the registers in order to ensure that the hardware really uses the requested rate. After the change the CPU frequency is correct: # cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq 800000 # cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq 800000 Cc: stable@vger.kernel.org Fixes: e47a4f55f240 ("clk: qcom: clk-alpha-pll: Add support for Stromer PLLs") Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Gabor Juhos <j4g8y7@gmail.com> Link: https://lore.kernel.org/r/20240328-alpha-pll-fix-stromer-set-rate-v3-1-1b79714c78bc@gmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 3c5b3e17b8fd1f1add5a9477306c355fab126977 upstream.

The clk_alpha_pll_stromer_set_rate() function writes inproper
values into the ALPHA_VAL{,_U} registers which results in wrong
clock rates when the alpha value is used.

The broken behaviour can be seen on IPQ5018 for example, when
dynamic scaling sets the CPU frequency to 800000 KHz. In this
case the CPU cores are running only at 792031 KHz:

  # cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq
  800000
  # cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq
  792031

This happens because the function ignores the fact that the alpha
value calculated by the alpha_pll_round_rate() function is only
32 bits wide which must be extended to 40 bits if it is used on
a hardware which supports 40 bits wide values.

Extend the clk_alpha_pll_stromer_set_rate() function to convert
the alpha value to 40 bits before wrinting that into the registers
in order to ensure that the hardware really uses the requested rate.

After the change the CPU frequency is correct:

  # cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq
  800000
  # cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq
  800000

Cc: stable@vger.kernel.org
Fixes: e47a4f55f240 ("clk: qcom: clk-alpha-pll: Add support for Stromer PLLs")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Link: https://lore.kernel.org/r/20240328-alpha-pll-fix-stromer-set-rate-v3-1-1b79714c78bc@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
clk: bcm: rpi: Assign ->num before accessing ->hws 2024-06-16T11:51:03+00:00 Nathan Chancellor nathan@kernel.org 2024-04-25T16:55:52+00:00 cdf9c7871d58d3df59d2775982e3533adb8ec920 commit 6dc445c1905096b2ed4db1a84570375b4e00cc0f upstream. Commit f316cdff8d67 ("clk: Annotate struct clk_hw_onecell_data with __counted_by") annotated the hws member of 'struct clk_hw_onecell_data' with __counted_by, which informs the bounds sanitizer about the number of elements in hws, so that it can warn when hws is accessed out of bounds. As noted in that change, the __counted_by member must be initialized with the number of elements before the first array access happens, otherwise there will be a warning from each access prior to the initialization because the number of elements is zero. This occurs in raspberrypi_discover_clocks() due to ->num being assigned after ->hws has been accessed: UBSAN: array-index-out-of-bounds in drivers/clk/bcm/clk-raspberrypi.c:374:4 index 3 is out of range for type 'struct clk_hw *[] __counted_by(num)' (aka 'struct clk_hw *[]') Move the ->num initialization to before the first access of ->hws, which clears up the warning. Cc: stable@vger.kernel.org Fixes: f316cdff8d67 ("clk: Annotate struct clk_hw_onecell_data with __counted_by") Signed-off-by: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20240425-cbl-bcm-assign-counted-by-val-before-access-v1-2-e2db3b82d5ef@kernel.org Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 6dc445c1905096b2ed4db1a84570375b4e00cc0f upstream.

Commit f316cdff8d67 ("clk: Annotate struct clk_hw_onecell_data with
__counted_by") annotated the hws member of 'struct clk_hw_onecell_data'
with __counted_by, which informs the bounds sanitizer about the number
of elements in hws, so that it can warn when hws is accessed out of
bounds. As noted in that change, the __counted_by member must be
initialized with the number of elements before the first array access
happens, otherwise there will be a warning from each access prior to the
initialization because the number of elements is zero. This occurs in
raspberrypi_discover_clocks() due to ->num being assigned after ->hws
has been accessed:

  UBSAN: array-index-out-of-bounds in drivers/clk/bcm/clk-raspberrypi.c:374:4
  index 3 is out of range for type 'struct clk_hw *[] __counted_by(num)' (aka 'struct clk_hw *[]')

Move the ->num initialization to before the first access of ->hws, which
clears up the warning.

Cc: stable@vger.kernel.org
Fixes: f316cdff8d67 ("clk: Annotate struct clk_hw_onecell_data with __counted_by")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20240425-cbl-bcm-assign-counted-by-val-before-access-v1-2-e2db3b82d5ef@kernel.org
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
clk: bcm: dvp: Assign ->num before accessing ->hws 2024-06-16T11:51:03+00:00 Nathan Chancellor nathan@kernel.org 2024-04-25T16:55:51+00:00 a1dd92fca0d6b58b55ed0484f75d4205dbb77010 commit 9368cdf90f52a68120d039887ccff74ff33b4444 upstream. Commit f316cdff8d67 ("clk: Annotate struct clk_hw_onecell_data with __counted_by") annotated the hws member of 'struct clk_hw_onecell_data' with __counted_by, which informs the bounds sanitizer about the number of elements in hws, so that it can warn when hws is accessed out of bounds. As noted in that change, the __counted_by member must be initialized with the number of elements before the first array access happens, otherwise there will be a warning from each access prior to the initialization because the number of elements is zero. This occurs in clk_dvp_probe() due to ->num being assigned after ->hws has been accessed: UBSAN: array-index-out-of-bounds in drivers/clk/bcm/clk-bcm2711-dvp.c:59:2 index 0 is out of range for type 'struct clk_hw *[] __counted_by(num)' (aka 'struct clk_hw *[]') Move the ->num initialization to before the first access of ->hws, which clears up the warning. Cc: stable@vger.kernel.org Fixes: f316cdff8d67 ("clk: Annotate struct clk_hw_onecell_data with __counted_by") Signed-off-by: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20240425-cbl-bcm-assign-counted-by-val-before-access-v1-1-e2db3b82d5ef@kernel.org Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 9368cdf90f52a68120d039887ccff74ff33b4444 upstream.

Commit f316cdff8d67 ("clk: Annotate struct clk_hw_onecell_data with
__counted_by") annotated the hws member of 'struct clk_hw_onecell_data'
with __counted_by, which informs the bounds sanitizer about the number
of elements in hws, so that it can warn when hws is accessed out of
bounds. As noted in that change, the __counted_by member must be
initialized with the number of elements before the first array access
happens, otherwise there will be a warning from each access prior to the
initialization because the number of elements is zero. This occurs in
clk_dvp_probe() due to ->num being assigned after ->hws has been
accessed:

  UBSAN: array-index-out-of-bounds in drivers/clk/bcm/clk-bcm2711-dvp.c:59:2
  index 0 is out of range for type 'struct clk_hw *[] __counted_by(num)' (aka 'struct clk_hw *[]')

Move the ->num initialization to before the first access of ->hws, which
clears up the warning.

Cc: stable@vger.kernel.org
Fixes: f316cdff8d67 ("clk: Annotate struct clk_hw_onecell_data with __counted_by")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20240425-cbl-bcm-assign-counted-by-val-before-access-v1-1-e2db3b82d5ef@kernel.org
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
clk: qcom: apss-ipq-pll: fix PLL rate for IPQ5018 2024-05-30T07:45:00+00:00 Gabor Juhos j4g8y7@gmail.com 2024-03-26T13:34:11+00:00 0224bf502aee39a7bf92741bd1dad04159808002 [ Upstream commit c55f7ee2ec239b6afd8639c7ac06493876deb0ea ] According to ipq5018.dtsi, the maximum supported rate by the CPU is 1.008 GHz on the IPQ5018 platform, however the current configuration of the PLL results in 1.2 GHz rate. Change the 'L' value in the PLL configuration to limit the rate to 1.008 GHz. The downstream kernel also uses the same value [1]. Also add a comment to indicate the desired frequency. [1] https://git.codelinaro.org/clo/qsdk/oss/kernel/linux-ipq-5.4/-/blob/NHSS.QSDK.12.4/drivers/clk/qcom/apss-ipq5018.c?ref_type=heads#L151 Fixes: 50492f929486 ("clk: qcom: apss-ipq-pll: add support for IPQ5018") Signed-off-by: Gabor Juhos <j4g8y7@gmail.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20240326-fix-ipq5018-apss-pll-rate-v1-1-82ab31c9da7e@gmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit c55f7ee2ec239b6afd8639c7ac06493876deb0ea ]

According to ipq5018.dtsi, the maximum supported rate by the
CPU is 1.008 GHz on the IPQ5018 platform, however the current
configuration of the PLL results in 1.2 GHz rate.

Change the 'L' value in the PLL configuration to limit the
rate to 1.008 GHz. The downstream kernel also uses the same
value [1]. Also add a comment to indicate the desired
frequency.

[1] https://git.codelinaro.org/clo/qsdk/oss/kernel/linux-ipq-5.4/-/blob/NHSS.QSDK.12.4/drivers/clk/qcom/apss-ipq5018.c?ref_type=heads#L151

Fixes: 50492f929486 ("clk: qcom: apss-ipq-pll: add support for IPQ5018")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240326-fix-ipq5018-apss-pll-rate-v1-1-82ab31c9da7e@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
clk: qcom: Fix SM_GPUCC_8650 dependencies 2024-05-30T07:45:00+00:00 Nathan Chancellor nathan@kernel.org 2024-03-18T15:18:11+00:00 e0cfada5861dbd2a80a74d38fd7b2722fc988eb3 [ Upstream commit 07fb0a76bb757990b99fc2ab78ad7d1709cc441d ] CONFIG_SM_GCC_8650 depends on ARM64 but it is selected by CONFIG_SM_GPUCC_8650, which can be selected on ARM, resulting in a Kconfig warning. WARNING: unmet direct dependencies detected for SM_GCC_8650 Depends on [n]: COMMON_CLK [=y] && COMMON_CLK_QCOM [=y] && (ARM64 || COMPILE_TEST [=n]) Selected by [y]: - SM_GPUCC_8650 [=y] && COMMON_CLK [=y] && COMMON_CLK_QCOM [=y] Add the same dependencies to CONFIG_SM_GPUCC_8650 to resolve the warning. Fixes: 8676fd4f3874 ("clk: qcom: add the SM8650 GPU Clock Controller driver") Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20240318-fix-some-qcom-kconfig-deps-v1-2-ea0773e3df5a@kernel.org Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 07fb0a76bb757990b99fc2ab78ad7d1709cc441d ]

CONFIG_SM_GCC_8650 depends on ARM64 but it is selected by
CONFIG_SM_GPUCC_8650, which can be selected on ARM, resulting in a
Kconfig warning.

WARNING: unmet direct dependencies detected for SM_GCC_8650
  Depends on [n]: COMMON_CLK [=y] && COMMON_CLK_QCOM [=y] && (ARM64 || COMPILE_TEST [=n])
  Selected by [y]:
  - SM_GPUCC_8650 [=y] && COMMON_CLK [=y] && COMMON_CLK_QCOM [=y]

Add the same dependencies to CONFIG_SM_GPUCC_8650 to resolve the
warning.

Fixes: 8676fd4f3874 ("clk: qcom: add the SM8650 GPU Clock Controller driver")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240318-fix-some-qcom-kconfig-deps-v1-2-ea0773e3df5a@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
clk: qcom: Fix SC_CAMCC_8280XP dependencies 2024-05-30T07:44:59+00:00 Nathan Chancellor nathan@kernel.org 2024-03-18T15:18:10+00:00 939ce2fb81a9b8d1741190e015a4307c24c72766 [ Upstream commit e00f2540a581f8b8c165e5ae8afe52e4ad038550 ] CONFIG_SC_GCC_8280XP depends on ARM64 but it is selected by CONFIG_SC_CAMCC_8280XP, which can be selected on ARM, resulting in a Kconfig warning. WARNING: unmet direct dependencies detected for SC_GCC_8280XP Depends on [n]: COMMON_CLK [=y] && COMMON_CLK_QCOM [=y] && (ARM64 || COMPILE_TEST [=n]) Selected by [y]: - SC_CAMCC_8280XP [=y] && COMMON_CLK [=y] && COMMON_CLK_QCOM [=y] Add the same dependencies to CONFIG_SC_CAMCC_8280XP to resolve the warning. Fixes: ff93872a9c61 ("clk: qcom: camcc-sc8280xp: Add sc8280xp CAMCC") Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20240318-fix-some-qcom-kconfig-deps-v1-1-ea0773e3df5a@kernel.org Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit e00f2540a581f8b8c165e5ae8afe52e4ad038550 ]

CONFIG_SC_GCC_8280XP depends on ARM64 but it is selected by
CONFIG_SC_CAMCC_8280XP, which can be selected on ARM, resulting in a
Kconfig warning.

WARNING: unmet direct dependencies detected for SC_GCC_8280XP
  Depends on [n]: COMMON_CLK [=y] && COMMON_CLK_QCOM [=y] && (ARM64 || COMPILE_TEST [=n])
  Selected by [y]:
  - SC_CAMCC_8280XP [=y] && COMMON_CLK [=y] && COMMON_CLK_QCOM [=y]

Add the same dependencies to CONFIG_SC_CAMCC_8280XP to resolve the
warning.

Fixes: ff93872a9c61 ("clk: qcom: camcc-sc8280xp: Add sc8280xp CAMCC")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240318-fix-some-qcom-kconfig-deps-v1-1-ea0773e3df5a@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
clk: qcom: mmcc-msm8998: fix venus clock issue 2024-05-30T07:44:57+00:00 Marc Gonzalez mgonzalez@freebox.fr 2024-04-25T15:07:07+00:00 98a1cfa29fc2049227806561753ab46ebfef3e90 [ Upstream commit e20ae5ae9f0c843aded4f06f3d1cab7384789e92 ] Right now, msm8998 video decoder (venus) is non-functional: $ time mpv --hwdec=v4l2m2m-copy --vd-lavc-software-fallback=no --vo=null --no-audio --untimed --length=30 --quiet demo-480.webm (+) Video --vid=1 (*) (vp9 854x480 29.970fps) Audio --aid=1 --alang=eng (*) (opus 2ch 48000Hz) [ffmpeg/video] vp9_v4l2m2m: output VIDIOC_REQBUFS failed: Connection timed out [ffmpeg/video] vp9_v4l2m2m: no v4l2 output context's buffers [ffmpeg/video] vp9_v4l2m2m: can't configure decoder Could not open codec. Software decoding fallback is disabled. Exiting... (Quit) Bryan O'Donoghue suggested the proper fix: - Set required register offsets in venus GDSC structs. - Set HW_CTRL flag. $ time mpv --hwdec=v4l2m2m-copy --vd-lavc-software-fallback=no --vo=null --no-audio --untimed --length=30 --quiet demo-480.webm (+) Video --vid=1 (*) (vp9 854x480 29.970fps) Audio --aid=1 --alang=eng (*) (opus 2ch 48000Hz) [ffmpeg/video] vp9_v4l2m2m: VIDIOC_G_FMT ioctl [ffmpeg/video] vp9_v4l2m2m: VIDIOC_G_FMT ioctl ... Using hardware decoding (v4l2m2m-copy). VO: [null] 854x480 nv12 Exiting... (End of file) real 0m3.315s user 0m1.277s sys 0m0.453s NOTES: GDSC = Globally Distributed Switch Controller Use same code as mmcc-msm8996 with: s/venus_gdsc/video_top_gdsc/ s/venus_core0_gdsc/video_subcore0_gdsc/ s/venus_core1_gdsc/video_subcore1_gdsc/ https://git.codelinaro.org/clo/la/kernel/msm-4.4/-/blob/caf_migration/kernel.lnx.4.4.r38-rel/include/dt-bindings/clock/msm-clocks-hwio-8996.h https://git.codelinaro.org/clo/la/kernel/msm-4.4/-/blob/caf_migration/kernel.lnx.4.4.r38-rel/include/dt-bindings/clock/msm-clocks-hwio-8998.h 0x1024 = MMSS_VIDEO GDSCR (undocumented) 0x1028 = MMSS_VIDEO_CORE_CBCR 0x1030 = MMSS_VIDEO_AHB_CBCR 0x1034 = MMSS_VIDEO_AXI_CBCR 0x1038 = MMSS_VIDEO_MAXI_CBCR 0x1040 = MMSS_VIDEO_SUBCORE0 GDSCR (undocumented) 0x1044 = MMSS_VIDEO_SUBCORE1 GDSCR (undocumented) 0x1048 = MMSS_VIDEO_SUBCORE0_CBCR 0x104c = MMSS_VIDEO_SUBCORE1_CBCR Fixes: d14b15b5931c2b ("clk: qcom: Add MSM8998 Multimedia Clock Controller (MMCC) driver") Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Marc Gonzalez <mgonzalez@freebox.fr> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://lore.kernel.org/r/ff4e2e34-a677-4c39-8c29-83655c5512ae@freebox.fr Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit e20ae5ae9f0c843aded4f06f3d1cab7384789e92 ]

Right now, msm8998 video decoder (venus) is non-functional:

$ time mpv --hwdec=v4l2m2m-copy --vd-lavc-software-fallback=no --vo=null --no-audio --untimed --length=30 --quiet demo-480.webm
 (+) Video --vid=1 (*) (vp9 854x480 29.970fps)
     Audio --aid=1 --alang=eng (*) (opus 2ch 48000Hz)
[ffmpeg/video] vp9_v4l2m2m: output VIDIOC_REQBUFS failed: Connection timed out
[ffmpeg/video] vp9_v4l2m2m: no v4l2 output context's buffers
[ffmpeg/video] vp9_v4l2m2m: can't configure decoder
Could not open codec.
Software decoding fallback is disabled.
Exiting... (Quit)

Bryan O'Donoghue suggested the proper fix:
- Set required register offsets in venus GDSC structs.
- Set HW_CTRL flag.

$ time mpv --hwdec=v4l2m2m-copy --vd-lavc-software-fallback=no --vo=null --no-audio --untimed --length=30 --quiet demo-480.webm
 (+) Video --vid=1 (*) (vp9 854x480 29.970fps)
     Audio --aid=1 --alang=eng (*) (opus 2ch 48000Hz)
[ffmpeg/video] vp9_v4l2m2m: VIDIOC_G_FMT ioctl
[ffmpeg/video] vp9_v4l2m2m: VIDIOC_G_FMT ioctl
...
Using hardware decoding (v4l2m2m-copy).
VO: [null] 854x480 nv12
Exiting... (End of file)
real	0m3.315s
user	0m1.277s
sys	0m0.453s

NOTES:

GDSC = Globally Distributed Switch Controller

Use same code as mmcc-msm8996 with:
s/venus_gdsc/video_top_gdsc/
s/venus_core0_gdsc/video_subcore0_gdsc/
s/venus_core1_gdsc/video_subcore1_gdsc/

https://git.codelinaro.org/clo/la/kernel/msm-4.4/-/blob/caf_migration/kernel.lnx.4.4.r38-rel/include/dt-bindings/clock/msm-clocks-hwio-8996.h
https://git.codelinaro.org/clo/la/kernel/msm-4.4/-/blob/caf_migration/kernel.lnx.4.4.r38-rel/include/dt-bindings/clock/msm-clocks-hwio-8998.h

0x1024 = MMSS_VIDEO GDSCR (undocumented)
0x1028 = MMSS_VIDEO_CORE_CBCR
0x1030 = MMSS_VIDEO_AHB_CBCR
0x1034 = MMSS_VIDEO_AXI_CBCR
0x1038 = MMSS_VIDEO_MAXI_CBCR
0x1040 = MMSS_VIDEO_SUBCORE0 GDSCR (undocumented)
0x1044 = MMSS_VIDEO_SUBCORE1 GDSCR (undocumented)
0x1048 = MMSS_VIDEO_SUBCORE0_CBCR
0x104c = MMSS_VIDEO_SUBCORE1_CBCR

Fixes: d14b15b5931c2b ("clk: qcom: Add MSM8998 Multimedia Clock Controller (MMCC) driver")
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Marc Gonzalez <mgonzalez@freebox.fr>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://lore.kernel.org/r/ff4e2e34-a677-4c39-8c29-83655c5512ae@freebox.fr
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
clk: qcom: dispcc-sm8650: fix DisplayPort clocks 2024-05-30T07:44:57+00:00 Dmitry Baryshkov dmitry.baryshkov@linaro.org 2024-04-24T01:39:32+00:00 37dcba7be735343582c4af5e8c644683b06a5a71 [ Upstream commit 615a292ee4d51303246278f3fa33cc38700fe00e ] On SM8650 DisplayPort link clocks use frequency tables inherited from the vendor kernel, it is not applicable in the upstream kernel. Drop frequency tables and use clk_byte2_ops for those clocks. This fixes frequency selection in the OPP core (which otherwise attempts to use invalid 810 KHz as DP link rate), also fixing the following message: msm-dp-display af54000.displayport-controller: _opp_config_clk_single: failed to set clock rate: -22 Fixes: 9e939f008338 ("clk: qcom: add the SM8650 Display Clock Controller driver") Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20240424-dispcc-dp-clocks-v2-4-b44038f3fa96@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 615a292ee4d51303246278f3fa33cc38700fe00e ]

On SM8650 DisplayPort link clocks use frequency tables inherited from
the vendor kernel, it is not applicable in the upstream kernel. Drop
frequency tables and use clk_byte2_ops for those clocks.

This fixes frequency selection in the OPP core (which otherwise attempts
to use invalid 810 KHz as DP link rate), also fixing the following
message:
msm-dp-display af54000.displayport-controller: _opp_config_clk_single: failed to set clock rate: -22

Fixes: 9e939f008338 ("clk: qcom: add the SM8650 Display Clock Controller driver")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240424-dispcc-dp-clocks-v2-4-b44038f3fa96@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>