linux-stable.git/drivers/clk, branch v5.4.64

clk: bcm2835: Do not use prediv with bcm2711's PLLs

2020-08-21T11:05:35+00:00

[ Upstream commit f34e4651ce66a754f41203284acf09b28b9dd955 ]

Contrary to previous SoCs, bcm2711 doesn't have a prescaler in the PLL
feedback loop. Bypass it by zeroing fb_prediv_mask when running on
bcm2711.

Note that, since the prediv configuration bits were re-purposed, this
was triggering miscalculations on all clocks hanging from the VPU clock,
notably the aux UART, making its output unintelligible.

Fixes: 42de9ad400af ("clk: bcm2835: Add BCM2711_CLOCK_EMMC2 support")
Reported-by: Nathan Chancellor 
Signed-off-by: Nicolas Saenz Julienne 
Link: https://lore.kernel.org/r/20200730182619.23246-1-nsaenzjulienne@suse.de
Tested-by: Nathan Chancellor 
Reviewed-by: Florian Fainelli 
Signed-off-by: Stephen Boyd 
Signed-off-by: Sasha Levin

clk: clk-atlas6: fix return value check in atlas6_clk_init()

2020-08-21T11:05:34+00:00

[ Upstream commit 12b90b40854a8461a02ef19f6f4474cc88d64b66 ]

In case of error, the function clk_register() returns ERR_PTR()
and never returns NULL. The NULL test in the return value check
should be replaced with IS_ERR().

Signed-off-by: Xu Wang 
Link: https://lore.kernel.org/r/20200713032143.21362-1-vulab@iscas.ac.cn
Acked-by: Barry Song 
Fixes: 7bf21bc81f28 ("clk: sirf: re-arch to make the codes support both prima2 and atlas6")
Signed-off-by: Stephen Boyd 
Signed-off-by: Sasha Levin

clk: qcom: gcc-sdm660: Fix up gcc_mss_mnoc_bimc_axi_clk

2020-08-21T11:05:34+00:00

[ Upstream commit 3386af51d3bcebcba3f7becdb1ef2e384abe90cf ]

Add missing halt_check, hwcg_reg and hwcg_bit properties.
These were likely omitted when porting the driver upstream.

Signed-off-by: Konrad Dybcio 
Link: https://lore.kernel.org/r/20200726111215.22361-9-konradybcio@gmail.com
Fixes: f2a76a2955c0 ("clk: qcom: Add Global Clock controller (GCC) driver for SDM660")
Signed-off-by: Stephen Boyd 
Signed-off-by: Sasha Levin

clk: qcom: clk-alpha-pll: remove unused/incorrect PLL_CAL_VAL

2020-08-21T11:05:33+00:00

[ Upstream commit c8b9002f44e4a1d2771b2f59f6de900864b1f9d7 ]

0x44 isn't a register offset, it is the value that goes into CAL_L_VAL.

Fixes: 548a909597d5 ("clk: qcom: clk-alpha-pll: Add support for Trion PLLs")
Signed-off-by: Jonathan Marek 
Tested-by: Dmitry Baryshkov 
Link: https://lore.kernel.org/r/20200709135251.643-3-jonathan@marek.ca
Signed-off-by: Stephen Boyd 
Signed-off-by: Sasha Levin

clk: qcom: gcc: fix sm8150 GPU and NPU clocks

2020-08-21T11:05:33+00:00

[ Upstream commit 667f39b59b494d96ae70f4217637db2ebbee3df0 ]

Fix the parents and set BRANCH_HALT_SKIP. From the downstream driver it
should be a 500us delay and not skip, however this matches what was done
for other clocks that had 500us delay in downstream.

Fixes: f73a4230d5bb ("clk: qcom: gcc: Add GPU and NPU clocks for SM8150")
Signed-off-by: Jonathan Marek 
Tested-by: Dmitry Baryshkov 
Link: https://lore.kernel.org/r/20200709135251.643-2-jonathan@marek.ca
Signed-off-by: Stephen Boyd 
Signed-off-by: Sasha Levin

clk: actions: Fix h_clk for Actions S500 SoC

2020-08-21T11:05:33+00:00

[ Upstream commit f47ee279d25fb0e010cae5d6e758e39b40eb6378 ]

The h_clk clock in the Actions Semi S500 SoC clock driver has an
invalid parent. Replace with the correct one.

Fixes: ed6b4795ece4 ("clk: actions: Add clock driver for S500 SoC")
Signed-off-by: Cristian Ciocaltea 
Reviewed-by: Manivannan Sadhasivam 
Link: https://lore.kernel.org/r/c57e7ebabfa970014f073b92fe95b47d3e5a70b1.1593788312.git.cristian.ciocaltea@gmail.com
Signed-off-by: Stephen Boyd 
Signed-off-by: Sasha Levin

clk: bcm63xx-gate: fix last clock availability

2020-08-19T06:16:07+00:00

[ Upstream commit cf8030d7035bd3e89c9e66f7193a7fc8057a9b9a ]

In order to make the last clock available, maxbit has to be set to the
highest bit value plus 1.

Fixes: 1c099779c1e2 ("clk: add BCM63XX gated clock controller driver")
Signed-off-by: Álvaro Fernández Rojas 
Link: https://lore.kernel.org/r/20200609110846.4029620-1-noltari@gmail.com
Reviewed-by: Florian Fainelli 
Signed-off-by: Stephen Boyd 
Signed-off-by: Sasha Levin

clk: scmi: Fix min and max rate when registering clocks with discrete rates

2020-08-19T06:15:55+00:00

[ Upstream commit fcd2e0deae50bce48450f14c8fc5611b08d7438c ]

Currently we are not initializing the scmi clock with discrete rates
correctly. We fetch the min_rate and max_rate value only for clocks with
ranges and ignore the ones with discrete rates. This will lead to wrong
initialization of rate range when clock supports discrete rate.

Fix this by using the first and the last rate in the sorted list of the
discrete clock rates while registering the clock.

Link: https://lore.kernel.org/r/20200709081705.46084-2-sudeep.holla@arm.com
Fixes: 6d6a1d82eaef7 ("clk: add support for clocks provided by SCMI")
Reviewed-by: Stephen Boyd 
Reported-and-tested-by: Dien Pham 
Signed-off-by: Sudeep Holla 
Signed-off-by: Sasha Levin

clk: qcom: clk-rpmh: Wait for completion when enabling clocks

2020-08-19T06:15:53+00:00

[ Upstream commit dad4e7fda4bdc1a6357db500a7bab8843c08e521 ]

The current implementation always uses rpmh_write_async, which doesn't
wait for completion. That's fine for disable requests since there's no
immediate need for the clocks and they can be disabled in the
background. However, for enable requests we need to ensure the clocks
are actually enabled before returning to the client. Otherwise, clients
can end up accessing their HW before the necessary clocks are enabled,
which can lead to bus errors.

Use the synchronous version of this API (rpmh_write) for enable requests
in the active set to ensure completion.

Completion isn't required for sleep/wake sets, since they don't take
effect until after we enter sleep. All rpmh requests are automatically
flushed prior to entering sleep.

Fixes: 9c7e47025a6b ("clk: qcom: clk-rpmh: Add QCOM RPMh clock driver")
Signed-off-by: Mike Tipton 
Link: https://lkml.kernel.org/r/20200215021232.1149-1-mdtipton@codeaurora.org
Reviewed-by: Bjorn Andersson 
[sboyd@kernel.org: Reorg code a bit for readability, rename to 'wait' to
make local variable not conflict with completion.h mechanism]
Signed-off-by: Stephen Boyd 
Signed-off-by: Sasha Levin

clk: qcom: gcc: Add missing UFS clocks for SM8150

2020-07-22T07:33:07+00:00

commit 37c72e4cae37f0dace1abb3711ede7fbc6d0862a upstream.

Add the missing ufs card and ufs phy clocks for SM8150. They were missed
in earlier addition of clock driver.

Fixes: 2a1d7eb854bb ("clk: qcom: gcc: Add global clock controller driver for SM8150")
Signed-off-by: Vinod Koul 
Link: https://lkml.kernel.org/r/20200513065420.32735-2-vkoul@kernel.org
Signed-off-by: Stephen Boyd 
Signed-off-by: Greg Kroah-Hartman