linux-stable.git/drivers/clk, branch v5.15 Linux kernel stable tree Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux 2021-10-30T16:55:46+00:00 Linus Torvalds torvalds@linux-foundation.org 2021-10-30T16:55:46+00:00 3a4347d82efdfcc5465b3ed37616426989182915 Pull clk fix from Stephen Boyd: "One fix for the composite clk that broke when we changed this clk type to use the determine_rate instead of round_rate clk op by default. This caused lots of problems on Rockchip SoCs because they heavily use the composite clk code to model the clk tree" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: composite: Also consider .determine_rate for rate + mux composites 
Pull clk fix from Stephen Boyd:
 "One fix for the composite clk that broke when we changed this clk type
  to use the determine_rate instead of round_rate clk op by default.
  This caused lots of problems on Rockchip SoCs because they heavily use
  the composite clk code to model the clk tree"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: composite: Also consider .determine_rate for rate + mux composites
clk: composite: Also consider .determine_rate for rate + mux composites 2021-10-18T19:59:42+00:00 Martin Blumenstingl martin.blumenstingl@googlemail.com 2021-10-16T10:50:21+00:00 675c496d0f92b481ebe4abf4fb06eadad7789de6 Commit 69a00fb3d69706 ("clk: divider: Implement and wire up .determine_rate by default") switches clk_divider_ops to implement .determine_rate by default. This breaks composite clocks with multiple parents because clk-composite.c does not use the special handling for mux + divider combinations anymore (that was restricted to rate clocks which only implement .round_rate, but not .determine_rate). Alex reports: This breaks lot of clocks for Rockchip which intensively uses composites, i.e. those clocks will always stay at the initial parent, which in some cases is the XTAL clock and I strongly guess it is the same for other platforms, which use composite clocks having more than one parent (e.g. mediatek, ti ...) Example (RK3399) clk_sdio is set (initialized) with XTAL (24 MHz) as parent in u-boot. It will always stay at this parent, even if the mmc driver sets a rate of 200 MHz (fails, as the nature of things), which should switch it to any of its possible parent PLLs defined in mux_pll_src_cpll_gpll_npll_ppll_upll_24m_p (see clk-rk3399.c) - which never happens. Restore the original behavior by changing the priority of the conditions inside clk-composite.c. Now the special rate + mux case (with rate_ops having a .round_rate - which is still the case for the default clk_divider_ops) is preferred over rate_ops which have .determine_rate defined (and not further considering the mux). Fixes: 69a00fb3d69706 ("clk: divider: Implement and wire up .determine_rate by default") Reported-by: Alex Bee <knaerzche@gmail.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20211016105022.303413-2-martin.blumenstingl@googlemail.com Tested-by: Alex Bee <knaerzche@gmail.com> Tested-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org> 
Commit 69a00fb3d69706 ("clk: divider: Implement and wire up
.determine_rate by default") switches clk_divider_ops to implement
.determine_rate by default. This breaks composite clocks with multiple
parents because clk-composite.c does not use the special handling for
mux + divider combinations anymore (that was restricted to rate clocks
which only implement .round_rate, but not .determine_rate).

Alex reports:
  This breaks lot of clocks for Rockchip which intensively uses
  composites,  i.e. those clocks will always stay at the initial parent,
  which in some cases  is the XTAL clock and I strongly guess it is the
  same for other platforms,  which use composite clocks having more than
  one parent (e.g. mediatek, ti ...)

  Example (RK3399)
  clk_sdio is set (initialized) with XTAL (24 MHz) as parent in u-boot.
  It will always stay at this parent, even if the mmc driver sets a rate
  of  200 MHz (fails, as the nature of things), which should switch it
  to   any of its possible parent PLLs defined in
  mux_pll_src_cpll_gpll_npll_ppll_upll_24m_p (see clk-rk3399.c)  - which
  never happens.

Restore the original behavior by changing the priority of the conditions
inside clk-composite.c. Now the special rate + mux case (with rate_ops
having a .round_rate - which is still the case for the default
clk_divider_ops) is preferred over rate_ops which have .determine_rate
defined (and not further considering the mux).

Fixes: 69a00fb3d69706 ("clk: divider: Implement and wire up .determine_rate by default")
Reported-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20211016105022.303413-2-martin.blumenstingl@googlemail.com
Tested-by: Alex Bee <knaerzche@gmail.com>
Tested-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
clk: qcom: add select QCOM_GDSC for SM6350 2021-10-13T18:44:42+00:00 Luca Weiss luca@z3ntu.xyz 2021-10-07T21:24:28+00:00 92c02ff1a43edce37cf1b092bfad37d84d7e4ea6 QCOM_GDSC is needed for the gcc driver to probe. Fixes: 131abae905df ("clk: qcom: Add SM6350 GCC driver") Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20211007212444.328034-2-luca@z3ntu.xyz Signed-off-by: Stephen Boyd <sboyd@kernel.org> 
QCOM_GDSC is needed for the gcc driver to probe.

Fixes: 131abae905df ("clk: qcom: Add SM6350 GCC driver")
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20211007212444.328034-2-luca@z3ntu.xyz
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
clk: qcom: gcc-sm6115: Fix offset for hlos1_vote_turing_mmu_tbu0_gdsc 2021-10-13T17:43:39+00:00 Shawn Guo shawn.guo@linaro.org 2021-09-19T02:23:08+00:00 e41bdd18644a5dde1f344b70eb262b5c426e6f16 It looks that the offset 0x7d060 is a copy & paste from above hlos1_vote_turing_mmu_tbu1_gdsc. Correct it to 0x7d07c as per downstream kernel. Fixes: cbe63bfdc54f ("clk: qcom: Add Global Clock controller (GCC) driver for SM6115") Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Link: https://lore.kernel.org/r/20210919022308.24046-1-shawn.guo@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org> 
It looks that the offset 0x7d060 is a copy & paste from above
hlos1_vote_turing_mmu_tbu1_gdsc.  Correct it to 0x7d07c as per
downstream kernel.

Fixes: cbe63bfdc54f ("clk: qcom: Add Global Clock controller (GCC) driver for SM6115")
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Link: https://lore.kernel.org/r/20210919022308.24046-1-shawn.guo@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Merge tag 'renesas-clk-for-v5.15-tag3' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into clk-fixes 2021-09-28T22:17:11+00:00 Stephen Boyd sboyd@kernel.org 2021-09-28T22:16:48+00:00 4b65021a63a21791790960001b79dc5fd4af9ced Pull Renesas clk driver fixes from Geert Uytterhoeven: - Fix inverted logic in RZ/G2L .is_enabled() function * tag 'renesas-clk-for-v5.15-tag3' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers: clk: renesas: rzg2l: Fix clk status function clk: renesas: r9a07g044: Mark IA55_CLK and DMAC_ACLK critical 
Pull Renesas clk driver fixes from Geert Uytterhoeven:

 - Fix inverted logic in RZ/G2L .is_enabled() function

* tag 'renesas-clk-for-v5.15-tag3' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers:
  clk: renesas: rzg2l: Fix clk status function
  clk: renesas: r9a07g044: Mark IA55_CLK and DMAC_ACLK critical
clk: socfpga: agilex: fix duplicate s2f_user0_clk 2021-09-24T23:03:08+00:00 Dinh Nguyen dinguyen@kernel.org 2021-09-16T22:51:26+00:00 09540fa337196be20e9f0241652364f09275d374 Remove the duplicate s2f_user0_clk and the unused s2f_usr0_mux define. Fixes: f817c132db67 ("clk: socfpga: agilex: fix up s2f_user0_clk representation") Cc: stable@vger.kernel.org Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Link: https://lore.kernel.org/r/20210916225126.1427700-1-dinguyen@kernel.org Signed-off-by: Stephen Boyd <sboyd@kernel.org> 
Remove the duplicate s2f_user0_clk and the unused s2f_usr0_mux define.

Fixes: f817c132db67 ("clk: socfpga: agilex: fix up s2f_user0_clk representation")
Cc: stable@vger.kernel.org
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lore.kernel.org/r/20210916225126.1427700-1-dinguyen@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
clk: renesas: rzg2l: Fix clk status function 2021-09-24T13:11:05+00:00 Biju Das biju.das.jz@bp.renesas.com 2021-09-22T11:24:05+00:00 fa2a30f8e0aa9304919750b116a9e9e322465299 As per RZ/G2L HW(Rev.0.50) manual, clock monitor register value 0 means clock is not supplied and 1 means clock is supplied. This patch fixes the issue by removing the inverted logic. Fixing the above, triggered following 2 issues 1) GIC interrupts don't work if we disable IA55_CLK and DMAC_ACLK. Fixed this issue by adding these clocks as critical clocks. 2) DMA is not working, since the DMA driver is not turning on DMAC_PCLK. So will provide a fix in the DMA driver to turn on DMA_PCLK. Fixes: ef3c613ccd68 ("clk: renesas: Add CPG core wrapper for RZ/G2L SoC") Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20210922112405.26413-2-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> 
As per RZ/G2L HW(Rev.0.50) manual, clock monitor register value
0 means clock is not supplied and 1 means clock is supplied.
This patch fixes the issue by removing the inverted logic.

Fixing the above, triggered following 2 issues

1) GIC interrupts don't work if we disable IA55_CLK and DMAC_ACLK.
   Fixed this issue by adding these clocks as critical clocks.

2) DMA is not working, since the DMA driver is not turning on DMAC_PCLK.
   So will provide a fix in the DMA driver to turn on DMA_PCLK.

Fixes: ef3c613ccd68 ("clk: renesas: Add CPG core wrapper for RZ/G2L SoC")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20210922112405.26413-2-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
clk: renesas: r9a07g044: Mark IA55_CLK and DMAC_ACLK critical 2021-09-24T13:11:05+00:00 Biju Das biju.das.jz@bp.renesas.com 2021-09-22T11:24:04+00:00 664bb2e45b89cd8213e3c9772713323f75e21892 Add IA55_CLK and DMAC_ACLK as critical clocks. Previously it worked ok, because of a bug in clock status function and the following patch in this series fixes the original bug. Fixes: c3e67ad6f5a2 ("dt-bindings: clock: r9a07g044-cpg: Update clock/reset definitions") Fixes: eb829e549ba6 ("clk: renesas: r9a07g044: Add DMAC clocks/resets") Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20210922112405.26413-1-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> 
Add IA55_CLK and DMAC_ACLK as critical clocks.

Previously it worked ok, because of a bug in clock status function
and the following patch in this series fixes the original bug.

Fixes: c3e67ad6f5a2 ("dt-bindings: clock: r9a07g044-cpg: Update clock/reset definitions")
Fixes: eb829e549ba6 ("clk: renesas: r9a07g044: Add DMAC clocks/resets")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20210922112405.26413-1-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux 2021-09-11T17:05:56+00:00 Linus Torvalds torvalds@linux-foundation.org 2021-09-11T17:05:56+00:00 2aae0a937ad169752b5710d4f210c1ae7a49d3cf Pull clk fix from Stephen Boyd: "One patch to fix an unused variable warning in a Qualcomm clk driver" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: qcom: gcc-sm6350: Remove unused variable 
Pull clk fix from Stephen Boyd:
 "One patch to fix an unused variable warning in a Qualcomm clk driver"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: qcom: gcc-sm6350: Remove unused variable
Merge tag 'mfd-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd 2021-09-07T19:38:59+00:00 Linus Torvalds torvalds@linux-foundation.org 2021-09-07T19:38:59+00:00 86406a9e733347f877a2bd5269ce7429d3748c6a Pull MFD updates from Lee Jones: "Core Frameworks: - Add support for registering devices via MFD cells to Simple MFD (I2C) New Drivers: - Add support for Renesas Synchronization Management Unit (SMU) New Device Support: - Add support for N5010 to Intel M10 BMC - Add support for Cannon Lake to Intel LPSS ACPI - Add support for Samsung SSG{1,2} to ST-Ericsson's U8500 family - Add support for TQMx110EB and TQMxE40x to TQ-Systems PLD TQMx86 New Functionality: - Add support for GPIO to Intel LPC ICH - Add support for Reset to Texas Instruments TPS65086 Fix-ups: - Trivial, sorting, whitespace, renaming, etc; mt6360-core, db8500-prcmu-regs, tqmx86 - Device Tree fiddling; syscon, axp20x, qcom,pm8008, ti,tps65086, brcm,cru - Use proper APIs for IRQ map resolution; ab8500-core, stmpe, tc3589x, wm8994-irq - Pass 'supplied-from' property through axp288_fuel_gauge via swnode - Remove unused file entry; MAINTAINERS - Make interrupt line optional; tps65086 - Rename db8500-cpuidle driver symbol; db8500-prcmu - Remove support for unused hardware; tqmx86 - Provide a standard LPC clock frequency for unknown boards; tqmx86 - Remove unused code; ti_am335x_tscadc - Use of_iomap() instead of ioremap(); syscon Bug Fixes: - Clear GPIO IRQ resource flags when no IRQ is set; tqmx86 - Fix incorrect/misleading frequencies; db8500-prcmu - Mitigate namespace clash with other GPIOBASE users" * tag 'mfd-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (31 commits) mfd: lpc_sch: Rename GPIOBASE to prevent build error mfd: syscon: Use of_iomap() instead of ioremap() dt-bindings: mfd: Add Broadcom CRU mfd: ti_am335x_tscadc: Delete superfluous error message mfd: tqmx86: Assume 24MHz LPC clock for unknown boards mfd: tqmx86: Add support for TQ-Systems DMI IDs mfd: tqmx86: Add support for TQMx110EB and TQMxE40x mfd: tqmx86: Fix typo in "platform" mfd: tqmx86: Remove incorrect TQMx90UC board ID mfd: tqmx86: Clear GPIO IRQ resource when no IRQ is set mfd: simple-mfd-i2c: Add support for registering devices via MFD cells mfd/cpuidle: ux500: Rename driver symbol mfd: tps65086: Add cell entry for reset driver mfd: tps65086: Make interrupt line optional dt-bindings: mfd: Convert tps65086.txt to YAML MAINTAINERS: Adjust ARM/NOMADIK/Ux500 ARCHITECTURES to file renaming mfd: db8500-prcmu: Handle missing FW variant mfd: db8500-prcmu: Rename register header mfd: axp20x: Add supplied-from property to axp288_fuel_gauge cell mfd: Don't use irq_create_mapping() to resolve a mapping ... 
Pull MFD updates from Lee Jones:
 "Core Frameworks:
   - Add support for registering devices via MFD cells to Simple MFD (I2C)

  New Drivers:
   - Add support for Renesas Synchronization Management Unit (SMU)

  New Device Support:
   - Add support for N5010 to Intel M10 BMC
   - Add support for Cannon Lake to Intel LPSS ACPI
   - Add support for Samsung SSG{1,2} to ST-Ericsson's U8500 family
   - Add support for TQMx110EB and TQMxE40x to TQ-Systems PLD TQMx86

  New Functionality:
   - Add support for GPIO to Intel LPC ICH
   - Add support for Reset to Texas Instruments TPS65086

  Fix-ups:
   - Trivial, sorting, whitespace, renaming, etc; mt6360-core, db8500-prcmu-regs, tqmx86
   - Device Tree fiddling; syscon, axp20x, qcom,pm8008, ti,tps65086, brcm,cru
   - Use proper APIs for IRQ map resolution; ab8500-core, stmpe, tc3589x, wm8994-irq
   - Pass 'supplied-from' property through axp288_fuel_gauge via swnode
   - Remove unused file entry; MAINTAINERS
   - Make interrupt line optional; tps65086
   - Rename db8500-cpuidle driver symbol; db8500-prcmu
   - Remove support for unused hardware; tqmx86
   - Provide a standard LPC clock frequency for unknown boards; tqmx86
   - Remove unused code; ti_am335x_tscadc
   - Use of_iomap() instead of ioremap(); syscon

  Bug Fixes:
   - Clear GPIO IRQ resource flags when no IRQ is set; tqmx86
   - Fix incorrect/misleading frequencies; db8500-prcmu
   - Mitigate namespace clash with other GPIOBASE users"

* tag 'mfd-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (31 commits)
  mfd: lpc_sch: Rename GPIOBASE to prevent build error
  mfd: syscon: Use of_iomap() instead of ioremap()
  dt-bindings: mfd: Add Broadcom CRU
  mfd: ti_am335x_tscadc: Delete superfluous error message
  mfd: tqmx86: Assume 24MHz LPC clock for unknown boards
  mfd: tqmx86: Add support for TQ-Systems DMI IDs
  mfd: tqmx86: Add support for TQMx110EB and TQMxE40x
  mfd: tqmx86: Fix typo in "platform"
  mfd: tqmx86: Remove incorrect TQMx90UC board ID
  mfd: tqmx86: Clear GPIO IRQ resource when no IRQ is set
  mfd: simple-mfd-i2c: Add support for registering devices via MFD cells
  mfd/cpuidle: ux500: Rename driver symbol
  mfd: tps65086: Add cell entry for reset driver
  mfd: tps65086: Make interrupt line optional
  dt-bindings: mfd: Convert tps65086.txt to YAML
  MAINTAINERS: Adjust ARM/NOMADIK/Ux500 ARCHITECTURES to file renaming
  mfd: db8500-prcmu: Handle missing FW variant
  mfd: db8500-prcmu: Rename register header
  mfd: axp20x: Add supplied-from property to axp288_fuel_gauge cell
  mfd: Don't use irq_create_mapping() to resolve a mapping
  ...