linux-stable.git/drivers/clk, branch v4.15.4

clk: use atomic runtime pm api in clk_core_is_enabled

2017-12-27T01:34:03+00:00

Current clk_pm_runtime_put is using pm_runtime_put_sync which
is not safe to be called in clk_core_is_enabled as it should
be able to run in atomic context.

Thus use pm_runtime_put instead which is atomic safe.

Cc: Stephen Boyd 
Cc: Michael Turquette 
Cc: Ulf Hansson 
Cc: Marek Szyprowski 
Fixes: 9a34b45397e5 ("clk: Add support for runtime PM")
Signed-off-by: Dong Aisheng 
Reviewed-by: Ulf Hansson 
Signed-off-by: Stephen Boyd

clk: sunxi: sun9i-mmc: Implement reset callback for reset controls

2017-12-19T19:50:46+00:00

Our MMC host driver now issues a reset, instead of just deasserting
the reset control, since commit c34eda69ad4c ("mmc: sunxi: Reset the
device at probe time"). The sun9i-mmc clock driver does not support
this, and will fail, which results in MMC not probing.

This patch implements the reset callback by asserting the reset control,
then deasserting it after a small delay.

Fixes: 7a6fca879f59 ("clk: sunxi: Add driver for A80 MMC config clocks/resets")
Cc:  # 4.14.x
Signed-off-by: Chen-Yu Tsai 
Acked-by: Philipp Zabel 
Acked-by: Maxime Ripard 
Signed-off-by: Michael Turquette 
Link: lkml.kernel.org/r/20171218035751.20661-1-wens@csie.org

clk: Manage proper runtime PM state in clk_change_rate()

2017-12-05T23:20:03+00:00

clk_change_rate() propagates rate change down to all its children. Such
operation requires managing proper runtime PM state of each child, what
was missing. Add needed calls to clk_pm_runtime*() to ensure that
set_rate() clock callback is called on runtime active clock.

This fixes following issue found on Exynos5433 TM2 board with devfreq
enabled:

Synchronous External Abort: synchronous external abort (0x96000210) at 0xffffff80093f5600
Internal error: : 96000210 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 5 Comm: kworker/u16:0 Not tainted 4.15.0-rc1-next-20171129+ #4
Hardware name: Samsung TM2 board (DT)
Workqueue: devfreq_wq devfreq_monitor
task: ffffffc0ca96b600 task.stack: ffffff80093a8000
pstate: a0000085 (NzCv daIf -PAN -UAO)
pc : clk_divider_set_rate+0x54/0x118
lr : clk_divider_set_rate+0x44/0x118
...
Process kworker/u16:0 (pid: 5, stack limit = 0xffffff80093a8000)
Call trace:
 clk_divider_set_rate+0x54/0x118
 clk_change_rate+0xfc/0x4e0
 clk_change_rate+0x1f0/0x4e0
 clk_change_rate+0x1f0/0x4e0
 clk_change_rate+0x1f0/0x4e0
 clk_core_set_rate_nolock+0x138/0x148
 clk_set_rate+0x28/0x50
 exynos_bus_passive_target+0x6c/0x11c
 update_devfreq_passive+0x58/0xb4
 devfreq_passive_notifier_call+0x50/0x5c
 notifier_call_chain+0x4c/0x88
 __srcu_notifier_call_chain+0x54/0x80
 srcu_notifier_call_chain+0x14/0x1c
 update_devfreq+0x100/0x1b4
 devfreq_monitor+0x2c/0x88
 process_one_work+0x148/0x3d8
 worker_thread+0x13c/0x3f8
 kthread+0x100/0x12c
 ret_from_fork+0x10/0x18

Reported-by: Chanwoo Choi 
Fixes: 9a34b45397e5 ("clk: Add support for runtime PM")
Signed-off-by: Marek Szyprowski 
Reviewed-by: Ulf Hansson 
Tested-by: Chanwoo Choi 
Reviewed-by: Chanwoo Choi 
Signed-off-by: Stephen Boyd

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

2017-11-18T04:04:24+00:00

Pull clk updates from Stephen Boyd:
 "We have two changes to the core framework this time around.

  The first being a large change that introduces runtime PM support to
  the clk framework. Now we properly call runtime PM operations on the
  device providing a clk when the clk is in use. This helps on SoCs
  where the clks provided by a device need something to be powered on
  before using the clks, like power domains or regulators. It also helps
  power those things down when clks aren't in use.

  The other core change is a devm API addition for clk providers so we
  can get rid of a bunch of clk driver remove functions that are just
  doing of_clk_del_provider().

  Outside of the core, we have the usual addition of clk drivers and
  smattering of non-critical fixes to existing drivers. The biggest diff
  is support for Mediatek MT2712 and MT7622 SoCs, but those patches
  really just add a bunch of data.

  By the way, we're trying something new here where we build the tree up
  with topic branches. We plan to work this into our workflow so that we
  don't step on each other's toes, and so the fixes branch can be merged
  on an as-needed basis.

  Summary:

  Core:
   - runtime PM support for clk providers
   - devm API for of_clk_add_hw_provider()

  New Drivers:
   - Mediatek MT2712 and MT7622
   - Renesas R-Car V3M SoC

  Updates:
   - runtime PM support for Samsung exynos5433/exynos4412 providers
   - removal of clkdev aliases on Samsung SoCs
   - convert clk-gpio to use gpio descriptors
   - various driver cleanups to match kernel coding style
   - Amlogic Video Processing Unit VPU and VAPB clks
   - sigma-delta modulation for Allwinner audio PLLs
   - Allwinner A83t Display clks
   - support for the second display unit clock on Renesas RZ/G1E
   - suspend/resume support for Renesas R-Car Gen3 CPG/MSSR
   - new clock ids for Rockchip rk3188 and rk3368 SoCs
   - various 'const' markings on clk_ops structures
   - RPM clk support on Qualcomm MSM8996/MSM8660 SoCs"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (137 commits)
  clk: stm32h7: fix test of clock config
  clk: pxa: fix building on older compilers
  clk: sunxi-ng: a83t: Fix i2c buses bits
  clk: ti: dra7-atl-clock: fix child-node lookups
  clk: qcom: common: fix legacy board-clock registration
  clk: uniphier: fix DAPLL2 clock rate of Pro5
  clk: uniphier: fix parent of miodmac clock data
  clk: hi3798cv200: correct parent mux clock for 'clk_sdio0_ciu'
  clk: hisilicon: Delete an error message for a failed memory allocation in hisi_register_clkgate_sep()
  clk: hi3660: fix incorrect uart3 clock freqency
  clk: kona-setup: Delete error messages for failed memory allocations
  ARC: clk: fix spelling mistake: "configurarion" -> "configuration"
  clk: cdce925: remove redundant check for non-null parent_name
  clk: versatile: Improve sizeof() usage
  clk: versatile: Delete error messages for failed memory allocations
  clk: ux500: Improve sizeof() usage
  clk: ux500: Delete error messages for failed memory allocations
  clk: spear: Delete error messages for failed memory allocations
  clk: ti: Delete error messages for failed memory allocations
  clk: mmp: Adjust checks for NULL pointers
  ...

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2017-11-17T00:05:01+00:00

Pull ARM SoC driver updates from Arnd Bergmann:
 "This branch contains platform-related driver updates for ARM and
  ARM64, these are the areas that bring the changes:

  New drivers:

   - driver support for Renesas R-Car V3M (R8A77970)

   - power management support for Amlogic GX

   - a new driver for the Tegra BPMP thermal sensor

   - a new bus driver for Technologic Systems NBUS

  Changes for subsystems that prefer to merge through arm-soc:

   - the usual updates for reset controller drivers from Philipp Zabel,
     with five added drivers for SoCs in the arc, meson, socfpa,
     uniphier and mediatek families

   - updates to the ARM SCPI and PSCI frameworks, from Sudeep Holla,
     Heiner Kallweit and Lorenzo Pieralisi

  Changes specific to some ARM-based SoC

   - the Freescale/NXP DPAA QBMan drivers from PowerPC can now work on
     ARM as well

   - several changes for power management on Broadcom SoCs

   - various improvements on Qualcomm, Broadcom, Amlogic, Atmel,
     Mediatek

   - minor Cleanups for Samsung, TI OMAP SoCs"

[ NOTE! This doesn't work without the previous ARM SoC device-tree pull,
  because the R8A77970 driver is missing a header file that came from
  that pull.

  The fact that this got merged afterwards only fixes it at this point,
  and bisection of that driver will fail if/when you walk into the
  history of that driver.           - Linus ]

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (96 commits)
  soc: amlogic: meson-gx-pwrc-vpu: fix power-off when powered by bootloader
  bus: add driver for the Technologic Systems NBUS
  memory: omap-gpmc: Remove deprecated gpmc_update_nand_reg()
  soc: qcom: remove unused label
  soc: amlogic: gx pm domain: add PM and OF dependencies
  drivers/firmware: psci_checker: Add missing destroy_timer_on_stack()
  dt-bindings: power: add amlogic meson power domain bindings
  soc: amlogic: add Meson GX VPU Domains driver
  soc: qcom: Remote filesystem memory driver
  dt-binding: soc: qcom: Add binding for rmtfs memory
  of: reserved_mem: Accessor for acquiring reserved_mem
  of/platform: Generalize /reserved-memory handling
  soc: mediatek: pwrap: fix fatal compiler error
  soc: mediatek: pwrap: fix compiler errors
  arm64: mediatek: cleanup message for platform selection
  soc: Allow test-building of MediaTek drivers
  soc: mediatek: place Kconfig for all SoC drivers under menu
  soc: mediatek: pwrap: add support for MT7622 SoC
  soc: mediatek: pwrap: add common way for setup CS timing extenstion
  soc: mediatek: pwrap: add MediaTek MT6380 as one slave of pwrap
  ..

Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2017-11-16T22:05:12+00:00

Pull ARM SoC platform updates from Arnd Bergmann:
 "Most of the commits are for defconfig changes, to enable newly added
  drivers or features that people have started using. For the changed
  lines lines, we have mostly cleanups, the affected platforms are OMAP,
  Versatile, EP93xx, Samsung, Broadcom, i.MX, and Actions.

  The largest single change is the introduction of the TI "sysc" bus
  driver, with the intention of cleaning up more legacy code.

  Two new SoC platforms get added this time:

   - Allwinner R40 is a modernized version of the A20 chip, now with a
     Quad-Core ARM Cortex-A7. According to the manufacturer, it is
     intended for "Smart Hardware"

   - Broadcom Hurricane 2 (Aka Strataconnect BCM5334X) is a family of
     chips meant for managed gigabit ethernet switches, based around a
     Cortex-A9 CPU.

  Finally, we gain SMP support for two platforms: Renesas R-Car E2 and
  Amlogic Meson8/8b, which were previously added but only supported
  uniprocessor operation"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (118 commits)
  ARM: multi_v7_defconfig: Select RPMSG_VIRTIO as module
  ARM: multi_v7_defconfig: enable CONFIG_GPIO_UNIPHIER
  arm64: defconfig: enable CONFIG_GPIO_UNIPHIER
  ARM: meson: enable MESON_IRQ_GPIO in Kconfig for meson8b
  ARM: meson: Add SMP bringup code for Meson8 and Meson8b
  ARM: smp_scu: allow the platform code to read the SCU CPU status
  ARM: smp_scu: add a helper for powering on a specific CPU
  dt-bindings: Amlogic: Add Meson8 and Meson8b SMP related documentation
  ARM: OMAP3: Delete an unnecessary variable initialisation in omap3xxx_hwmod_init()
  ARM: OMAP3: Use common error handling code in omap3xxx_hwmod_init()
  ARM: defconfig: select the right SX150X driver
  arm64: defconfig: Enable QCOM_IOMMU
  arm64: Add ThunderX drivers to defconfig
  arm64: defconfig: Enable Tegra PCI controller
  cpufreq: imx6q: Move speed grading check to cpufreq driver
  arm64: defconfig: re-enable Qualcomm DB410c USB
  ARM: configs: stm32: Add MDMA support in STM32 defconfig
  ARM: imx: Enable cpuidle for i.MX6DL starting at 1.1
  bus: ti-sysc: Fix unbalanced pm_runtime_enable by adding remove
  bus: ti-sysc: mark PM functions as __maybe_unused
  ...

Merge branch 'clk-cleanup' into clk-next

2017-11-15T16:16:13+00:00

* clk-cleanup:
  clk: kona-setup: Delete error messages for failed memory allocations
  ARC: clk: fix spelling mistake: "configurarion" -> "configuration"
  clk: cdce925: remove redundant check for non-null parent_name
  clk: versatile: Improve sizeof() usage
  clk: versatile: Delete error messages for failed memory allocations
  clk: ux500: Improve sizeof() usage
  clk: ux500: Delete error messages for failed memory allocations
  clk: spear: Delete error messages for failed memory allocations
  clk: ti: Delete error messages for failed memory allocations
  clk: mmp: Adjust checks for NULL pointers
  clk: mmp: Use common error handling code in mmp_clk_register_mix()
  clk: mmp: Delete error messages for failed memory allocations
  clk: clk-xgene: Adjust six checks for null pointers
  clk: clk-xgene: Delete error messages for failed memory allocations
  clk: clk-u300: Fix a typo in two comment lines
  clk: clk-u300: Add some spaces for better code readability
  clk: clk-u300: Improve sizeof() usage
  clk: clk-u300: Delete error messages for failed memory allocations
  clk: clk-mux: Improve a size determination in clk_hw_register_mux_table()
  clk: clk-mux: Delete an error message for a failed memory allocation

clk: stm32h7: fix test of clock config

2017-11-15T01:06:49+00:00

fix test of composite clock config (bad copy / past)

Signed-off-by: Gabriel Fernandez 
Fixes: 3e4d618b0722 ("clk: stm32h7: Add stm32h743 clock driver")
Signed-off-by: Stephen Boyd

clk: pxa: fix building on older compilers

2017-11-14T23:55:53+00:00

gcc-4.4 got confused by the inline assembler statement:

drivers/clk/pxa/clk-pxa.c: In function 'pxa2xx_core_turbo_switch':
drivers/clk/pxa/clk-pxa.c:152: error: expected string literal before ')' token

This removes the extraneous ':' to let all compilers parse the
driver correctly.

Signed-off-by: Arnd Bergmann 
Acked-by: Robert Jarzmik 
Signed-off-by: Stephen Boyd

clk: sunxi-ng: a83t: Fix i2c buses bits

2017-11-14T23:53:53+00:00

i2c1 and i2c2 bits for CCU are not bit 0 but bit 1 and bit 2.
Because of that, the i2c0 (bit 0) was not correctly configured.
Fixed the correct bits for i2c1 and i2c2.

Fixes: 05359be1176b ("clk: sunxi-ng: Add driver for A83T CCU")

Signed-off-by: Mylène Josserand 
Acked-by: Maxime Ripard 
Signed-off-by: Stephen Boyd