Pull Qualcomm clk driver fixes from Bjorn Andersson:

The parking of shared RCGs during registration parks the MDP source
clock, disabling display until the msm display driver successfully
initializes the hardware again. Mark this clock on Makena and Hamoa as
"no_init_park" to retain a working recovery console etc.

* tag 'qcom-clk-fixes-for-7.1' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
  clk: qcom: dispcc-sc8280xp: Don't park mdp_clk_src at registration time
  clk: qcom: x1e80100-dispcc: Stop disp_cc_mdss_mdp_clk_src from getting parked

Pull a Samsung clk driver fix from Krzysztof Kozlowski:

Google GS101: Correct the register name for saving and restoring state
during system suspend and resume.  Lack of proper save/restore leads to
incorrect clock values after system resume.

* tag 'samsung-clk-fixes-7.1' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  clk: samsung: gs101: Fix missing USI7_USI DIV clock in peric0_clk_regs

Parking disp{0,1}_cc_mdss_mdp_clk_src clk broke simplefb on HUAWEI
Gaokun3, the image will stuck at grey for seconds until msm takes
over framebuffer. Use clk_rcg2_shared_no_init_park_ops to skip it.

Signed-off-by: Pengyu Luo <mitltlatltl@gmail.com>
Tested-by: Jérôme de Bretagne <jerome.debretagne@gmail.com>
Fixes: 01a0a6cc8cfd ("clk: qcom: Park shared RCGs upon registration")
Link: https://lore.kernel.org/r/20260303150152.90685-1-mitltlatltl@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

In the peric0_clk_regs array, the divider register offset for USI6 was
accidentally listed twice, while the divider for USI7 was omitted.

Missing this DIV register causes the USI7 clock divider setting to be
lost and reset to its hardware default value during a suspend/resume
cycle.

Replace the duplicated USI6 DIV entry with the correct USI7 DIV
register.

Fixes: 893f133a040b ("clk: samsung: gs101: add support for cmu_peric0")
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://patch.msgid.link/20260505171457.1960837-1-visitorckw@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

Parking disp_cc_mdss_mdp_clk_src at 19.2MHz causing the EFI GOP framebuffer
to stop functioning. The EFI GOP framebuffer should keep working until
the msm display driver loads, to help with boot debugging and to ensure
display output when the msm module is not in the initramfs.

Switch disp_cc_mdss_mdp_clk_src over to clk_rcg2_shared_no_init_park_ops
to keep the EFI GOP working after binding the x1e80100-dispcc driver.

Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Fixes: 01a0a6cc8cfd ("clk: qcom: Park shared RCGs upon registration")
Link: https://lore.kernel.org/r/20260425123351.6292-1-johannes.goede@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

The driver reuses the OF node of the parent multi-function device but
fails to take another reference to balance the one dropped by the
platform bus code when unbinding the MFD and deregistering the child
devices.

Fix this by using the intended helper for reusing OF nodes.

Fixes: 2dc51ca822e4 ("clk: RK808: Reduce 'struct rk808' usage")
Cc: stable@vger.kernel.org	# 6.5
Cc: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

Grow our clk-eyeq family; it knows how to spawn reset provider and pin
controller children. Expand with a generic PHY driver on EyeQ5.

Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

The auxiliary device creation of this driver is simple enough to
use the available auxiliary device creation helper.

Use it and remove some boilerplate code.

Tested-by: Théo Lebrun <theo.lebrun@bootlin.com>  # On Mobileye EyeQ5
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

top_dclk is the DDR bus clock. If it is gated by clk_disable_unused,
all memory-mapped bus transactions cease to function, causing DMA
engines to hang and general system instability.

Mark it CLK_IS_CRITICAL so the CCF never gates it during the
unused clock sweep.

Fixes: e371a77255b8 ("clk: spacemit: k3: add the clock tree")
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

Pull clk fix from Stephen Boyd:
 "One more fix for the merge window to avoid a boot hang on
  Raspberry Pi 3B by marking the VEC clk critical so that it
  doesn't get turned off and hang the bus"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: bcm: rpi: Mark VEC clock as CLK_IGNORE_UNUSED