linux-stable.git/drivers/clk, branch linux-5.0.y Linux kernel stable tree clk: renesas: rcar-gen3: Correct parent clock of Audio-DMAC 2019-05-31T13:45:14+00:00 Takeshi Kihara takeshi.kihara.df@renesas.com 2018-09-28T07:33:06+00:00 fc7f4aaa7f7d6a8f56ea11a9ffc002dd3741517a [ Upstream commit b9df2ea2b8d09ad850afe4d4a0403cb23d9e0c02 ] The clock sources of the AXI-bus clock (266.66 MHz) used for Audio-DMAC DMA transfers are: Channel R-Car H3 R-Car M3-W R-Car M3-N R-Car E3 --------------------------------------------------------------- Audio-DMAC0 S1D2 S1D2 S1D2 S1D2 Audio-DMAC1 S1D2 S1D2 S1D2 - As a result, change the parent clocks of the Audio-DMAC{0,1} module clocks on R-Car H3, R-Car M3-W, and R-Car M3-N to S1D2, and change the parent clock of the Audio-DMAC0 module on R-Car E3 to S1D2. NOTE: This information will be reflected in a future revision of the R-Car Gen3 Hardware Manual. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> [geert: Update R-Car D3, RZ/G2M, and RZ/G2E] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit b9df2ea2b8d09ad850afe4d4a0403cb23d9e0c02 ]

The clock sources of the AXI-bus clock (266.66 MHz) used for Audio-DMAC
DMA transfers are:

    Channel        R-Car H3    R-Car M3-W    R-Car M3-N    R-Car E3
    ---------------------------------------------------------------
    Audio-DMAC0    S1D2        S1D2          S1D2          S1D2
    Audio-DMAC1    S1D2        S1D2          S1D2          -

As a result, change the parent clocks of the Audio-DMAC{0,1} module
clocks on R-Car H3, R-Car M3-W, and R-Car M3-N to S1D2, and change the
parent clock of the Audio-DMAC0 module on R-Car E3 to S1D2.

NOTE: This information will be reflected in a future revision of the
      R-Car Gen3 Hardware Manual.

Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
[geert: Update R-Car D3, RZ/G2M, and RZ/G2E]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
clk: renesas: rcar-gen3: Correct parent clock of SYS-DMAC 2019-05-31T13:45:13+00:00 Takeshi Kihara takeshi.kihara.df@renesas.com 2018-09-28T07:18:00+00:00 75a20a8c0fc93f2e4e683413c356a5a830e0dda8 [ Upstream commit 3c772f71a552d343a96868ed9a809f9047be94f5 ] The clock sources of the AXI BUS clock (266.66 MHz) used for SYS-DMAC DMA transfers are: Channel R-Car H3 R-Car M3-W R-Car M3-N ------------------------------------------------- SYS-DMAC0 S0D3 S0D3 S0D3 SYS-DMAC1 S3D1 S3D1 S3D1 SYS-DMAC2 S3D1 S3D1 S3D1 As a result, change the parent clocks of the SYS-DMAC{1,2} module clocks on R-Car H3, R-Car M3-W, and R-Car M3-N to S3D1. NOTE: This information will be reflected in a future revision of the R-Car Gen3 Hardware Manual. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> [geert: Update RZ/G2M] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 3c772f71a552d343a96868ed9a809f9047be94f5 ]

The clock sources of the AXI BUS clock (266.66 MHz) used for SYS-DMAC
DMA transfers are:

    Channel      R-Car H3    R-Car M3-W    R-Car M3-N
    -------------------------------------------------
    SYS-DMAC0    S0D3        S0D3          S0D3
    SYS-DMAC1    S3D1        S3D1          S3D1
    SYS-DMAC2    S3D1        S3D1          S3D1

As a result, change the parent clocks of the SYS-DMAC{1,2} module clocks
on R-Car H3, R-Car M3-W, and R-Car M3-N to S3D1.

NOTE: This information will be reflected in a future revision of the
      R-Car Gen3 Hardware Manual.

Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
[geert: Update RZ/G2M]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
clk: zynqmp: fix check for fractional clock 2019-05-31T13:45:07+00:00 Michael Tretter m.tretter@pengutronix.de 2019-03-19T10:01:46+00:00 9f69f7e7186a6388cf2dc199e7fcac174a4c32f5 [ Upstream commit c06e64407e031e71c67f45f07981510ca4c880a1 ] The firmware sets BIT(13) in clkflag to mark a divider as fractional divider. The clock driver copies the clkflag straight to the flags of the common clock framework. In the common clk framework flags, BIT(13) is defined as CLK_DUTY_CYCLE_PARENT. Add a new field to the zynqmp_clk_divider to specify if a divider is a fractional devider. Set this field based on the clkflag when registering a divider. At the same time, unset BIT(13) from clkflag when copying the flags to the common clk framework flags. Signed-off-by: Michael Tretter <m.tretter@pengutronix.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit c06e64407e031e71c67f45f07981510ca4c880a1 ]

The firmware sets BIT(13) in clkflag to mark a divider as fractional
divider. The clock driver copies the clkflag straight to the flags of
the common clock framework. In the common clk framework flags, BIT(13)
is defined as CLK_DUTY_CYCLE_PARENT.

Add a new field to the zynqmp_clk_divider to specify if a divider is a
fractional devider. Set this field based on the clkflag when registering
a divider.

At the same time, unset BIT(13) from clkflag when copying the flags to
the common clk framework flags.

Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
clk: rockchip: Make rkpwm a critical clock on rk3288 2019-05-31T13:45:07+00:00 Douglas Anderson dianders@chromium.org 2019-04-09T20:47:06+00:00 03492b8e72c2342c2c3f8c25a97b2756db717a7d [ Upstream commit dfe7fb21cd9e730230d55a79bc72cf2ece67cdd5 ] Most rk3288-based boards are derived from the EVB and thus use a PWM regulator for the logic rail. However, most rk3288-based boards don't specify the PWM regulator in their device tree. We'll deal with that by making it critical. NOTE: it's important to make it critical and not just IGNORE_UNUSED because all PWMs in the system share the same clock. We don't want another PWM user to turn the clock on and off and kill the logic rail. This change is in preparation for actually having the PWMs in the rk3288 device tree actually point to the proper PWM clock. Up until now they've all pointed to the clock for the old IP block and they've all worked due to the fact that rkpwm was IGNORE_UNUSED and that the clock rates for both clocks were the same. Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit dfe7fb21cd9e730230d55a79bc72cf2ece67cdd5 ]

Most rk3288-based boards are derived from the EVB and thus use a PWM
regulator for the logic rail.  However, most rk3288-based boards don't
specify the PWM regulator in their device tree.  We'll deal with that
by making it critical.

NOTE: it's important to make it critical and not just IGNORE_UNUSED
because all PWMs in the system share the same clock.  We don't want
another PWM user to turn the clock on and off and kill the logic rail.

This change is in preparation for actually having the PWMs in the
rk3288 device tree actually point to the proper PWM clock.  Up until
now they've all pointed to the clock for the old IP block and they've
all worked due to the fact that rkpwm was IGNORE_UNUSED and that the
clock rates for both clocks were the same.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
clk: rockchip: Fix video codec clocks on rk3288 2019-05-31T13:45:07+00:00 Douglas Anderson dianders@chromium.org 2019-04-11T13:55:55+00:00 d3b4d73ef7848683f0413595a6fb631a222b2ad0 [ Upstream commit 00c0cd9e59d265b393553e9afa54fee8b10e8158 ] It appears that there is a typo in the rk3288 TRM. For GRF_SOC_CON0[7] it says that 0 means "vepu" and 1 means "vdpu". It's the other way around. How do I know? Here's my evidence: 1. Prior to commit 4d3e84f99628 ("clk: rockchip: describe aclk_vcodec using the new muxgrf type on rk3288") we always pretended that we were using "aclk_vdpu" and the comment in the code said that this matched the default setting in the system. In fact the default setting is 0 according to the TRM and according to reading memory at bootup. In addition rk3288-based Chromebooks ran like this and the video codecs worked. 2. With the existing clock code if you boot up and try to enable the new VIDEO_ROCKCHIP_VPU as a module (and without "clk_ignore_unused" on the command line), you get errors like "failed to get ack on domain 'pd_video', val=0x80208". After flipping vepu/vdpu things init OK. 3. If I export and add both the vepu and vdpu to the list of clocks for RK3288_PD_VIDEO I can get past the power domain errors, but now I freeze when the vpu_mmu gets initted. 4. If I just mark the "vdpu" as IGNORE_UNUSED then everything boots up and probes OK showing that somehow the "vdpu" was important to keep enabled. This is because we were actually using it as a parent. 5. After this change I can hack "aclk_vcodec_pre" to parent from "aclk_vepu" using assigned-clocks and the video codec still probes OK. 6. Rockchip has said so on the mailing list [1]. ...so let's fix it. Let's also add CLK_SET_RATE_PARENT to "aclk_vcodec_pre" as suggested by Jonas Karlman. Prior to the same commit you could do clk_set_rate() on "aclk_vcodec" and it would change "aclk_vdpu". That's because "aclk_vcodec" was a simple gate clock (always gets CLK_SET_RATE_PARENT) and its direct parent was "aclk_vdpu". After that commit "aclk_vcodec_pre" gets in the way so we need to add CLK_SET_RATE_PARENT to it too. [1] https://lkml.kernel.org/r/1d17b015-9e17-34b9-baf8-c285dc1957aa@rock-chips.com Fixes: 4d3e84f99628 ("clk: rockchip: describe aclk_vcodec using the new muxgrf type on rk3288") Suggested-by: Jonas Karlman <jonas@kwiboo.se> Suggested-by: Randy Li <ayaka@soulik.info> Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 00c0cd9e59d265b393553e9afa54fee8b10e8158 ]

It appears that there is a typo in the rk3288 TRM.  For
GRF_SOC_CON0[7] it says that 0 means "vepu" and 1 means "vdpu".  It's
the other way around.

How do I know?  Here's my evidence:

1. Prior to commit 4d3e84f99628 ("clk: rockchip: describe aclk_vcodec
   using the new muxgrf type on rk3288") we always pretended that we
   were using "aclk_vdpu" and the comment in the code said that this
   matched the default setting in the system.  In fact the default
   setting is 0 according to the TRM and according to reading memory
   at bootup.  In addition rk3288-based Chromebooks ran like this and
   the video codecs worked.
2. With the existing clock code if you boot up and try to enable the
   new VIDEO_ROCKCHIP_VPU as a module (and without "clk_ignore_unused"
   on the command line), you get errors like "failed to get ack on
   domain 'pd_video', val=0x80208".  After flipping vepu/vdpu things
   init OK.
3. If I export and add both the vepu and vdpu to the list of clocks
   for RK3288_PD_VIDEO I can get past the power domain errors, but now
   I freeze when the vpu_mmu gets initted.
4. If I just mark the "vdpu" as IGNORE_UNUSED then everything boots up
   and probes OK showing that somehow the "vdpu" was important to keep
   enabled.  This is because we were actually using it as a parent.
5. After this change I can hack "aclk_vcodec_pre" to parent from
   "aclk_vepu" using assigned-clocks and the video codec still probes
   OK.
6. Rockchip has said so on the mailing list [1].

...so let's fix it.

Let's also add CLK_SET_RATE_PARENT to "aclk_vcodec_pre" as suggested
by Jonas Karlman.  Prior to the same commit you could do
clk_set_rate() on "aclk_vcodec" and it would change "aclk_vdpu".
That's because "aclk_vcodec" was a simple gate clock (always gets
CLK_SET_RATE_PARENT) and its direct parent was "aclk_vdpu".  After
that commit "aclk_vcodec_pre" gets in the way so we need to add
CLK_SET_RATE_PARENT to it too.

[1] https://lkml.kernel.org/r/1d17b015-9e17-34b9-baf8-c285dc1957aa@rock-chips.com

Fixes: 4d3e84f99628 ("clk: rockchip: describe aclk_vcodec using the new muxgrf type on rk3288")
Suggested-by: Jonas Karlman <jonas@kwiboo.se>
Suggested-by: Randy Li <ayaka@soulik.info>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
clk: rockchip: undo several noc and special clocks as critical on rk3288 2019-05-31T13:45:01+00:00 Douglas Anderson dianders@chromium.org 2019-04-12T16:17:47+00:00 a7171d4225d9dc3ec4c355e911afcf7d18e514fc [ Upstream commit f4033db5b84ebe4b32c25ba2ed65ab20b628996a ] This is mostly a revert of commit 55bb6a633c33 ("clk: rockchip: mark noc and some special clk as critical on rk3288") except that we're keeping "pmu_hclk_otg0" as critical still. NOTE: turning these clocks off doesn't seem to do a whole lot in terms of power savings (checking the power on the logic rail). It appears to save maybe 1-2mW. ...but still it seems like we should turn the clocks off if they aren't needed. About "pmu_hclk_otg0" (the one clock from the original commit we're still keeping critical) from an email thread: > pmu ahb clock > > Function: Clock to pmu module when hibernation and/or ADP is > enabled. Must be greater than or equal to 30 MHz. > > If the SOC design does not support hibernation/ADP function, only have > hclk_otg, this clk can be switched according to the usage of otg. > If the SOC design support hibernation/ADP, has two clocks, hclk_otg and > pmu_hclk_otg0. > Hclk_otg belongs to the closed part of otg logic, which can be switched > according to the use of otg. > > pmu_hclk_otg0 belongs to the always on part. > > As for whether pmu_hclk_otg0 can be turned off when otg is not in use, > we have not tested. IC suggest make pmu_hclk_otg0 always on. For the rest of the clocks: atclk: No documentation about this clock other than that it goes to the CPU. CPU functions fine without it on. Maybe needed for JTAG? jtag: Presumably this clock is only needed if you're debugging with JTAG. It doesn't seem like it makes sense to waste power for every rk3288 user. In any case to do JTAG you'd need private patches to adjust the pinctrl the mux the JTAG out anyway. pclk_dbg, pclk_core_niu: On veyron Chromebooks we turn these two clocks on only during kernel panics in order to access some coresight registers. Since nothing in the upstream kernel does this we should be able to leave them off safely. Maybe also needed for JTAG? hsicphy12m_xin12m: There is no indication of why this clock would need to be turned on for boards that don't use HSIC. pclk_ddrupctl[0-1], pclk_publ0[0-1]: On veyron Chromebooks we turn these 4 clocks on only when doing DDR transitions and they are off otherwise. I see no reason why they'd need to be on in the upstream kernel which doesn't support DDRFreq. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Elaine Zhang <zhangqing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit f4033db5b84ebe4b32c25ba2ed65ab20b628996a ]

This is mostly a revert of commit 55bb6a633c33 ("clk: rockchip: mark
noc and some special clk as critical on rk3288") except that we're
keeping "pmu_hclk_otg0" as critical still.

NOTE: turning these clocks off doesn't seem to do a whole lot in terms
of power savings (checking the power on the logic rail).  It appears
to save maybe 1-2mW.  ...but still it seems like we should turn the
clocks off if they aren't needed.

About "pmu_hclk_otg0" (the one clock from the original commit we're
still keeping critical) from an email thread:

> pmu ahb clock
>
> Function: Clock to pmu module when hibernation and/or ADP is
> enabled. Must be greater than or equal to 30 MHz.
>
> If the SOC design does not support hibernation/ADP function, only have
> hclk_otg, this clk can be switched according to the usage of otg.
> If the SOC design support hibernation/ADP, has two clocks, hclk_otg and
> pmu_hclk_otg0.
> Hclk_otg belongs to the closed part of otg logic, which can be switched
> according to the use of otg.
>
> pmu_hclk_otg0 belongs to the always on part.
>
> As for whether pmu_hclk_otg0 can be turned off when otg is not in use,
> we have not tested. IC suggest make pmu_hclk_otg0 always on.

For the rest of the clocks:

atclk: No documentation about this clock other than that it goes to
the CPU.  CPU functions fine without it on.  Maybe needed for JTAG?

jtag: Presumably this clock is only needed if you're debugging with
JTAG.  It doesn't seem like it makes sense to waste power for every
rk3288 user.  In any case to do JTAG you'd need private patches to
adjust the pinctrl the mux the JTAG out anyway.

pclk_dbg, pclk_core_niu: On veyron Chromebooks we turn these two
clocks on only during kernel panics in order to access some coresight
registers.  Since nothing in the upstream kernel does this we should
be able to leave them off safely.  Maybe also needed for JTAG?

hsicphy12m_xin12m: There is no indication of why this clock would need
to be turned on for boards that don't use HSIC.

pclk_ddrupctl[0-1], pclk_publ0[0-1]: On veyron Chromebooks we turn
these 4 clocks on only when doing DDR transitions and they are off
otherwise.  I see no reason why they'd need to be on in the upstream
kernel which doesn't support DDRFreq.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
clk: sunxi-ng: nkmp: Avoid GENMASK(-1, 0) 2019-05-25T16:22:24+00:00 Jernej Skrabec jernej.skrabec@siol.net 2019-04-02T21:06:21+00:00 f3adb80bb2439af018e4b21eb28058d4ebe830f3 [ Upstream commit 2abc330c514fe56c570bb1a6318b054b06a4f72e ] Sometimes one of the nkmp factors is unused. This means that one of the factors shift and width values are set to 0. Current nkmp clock code generates a mask for each factor with GENMASK(width + shift - 1, shift). For unused factor this translates to GENMASK(-1, 0). This code is further expanded by C preprocessor to final version: (((~0UL) - (1UL << (0)) + 1) & (~0UL >> (BITS_PER_LONG - 1 - (-1)))) or a bit simplified: (~0UL & (~0UL >> BITS_PER_LONG)) It turns out that result of the second part (~0UL >> BITS_PER_LONG) is actually undefined by C standard, which clearly specifies: "If the value of the right operand is negative or is greater than or equal to the width of the promoted left operand, the behavior is undefined." Additionally, compiling kernel with aarch64-linux-gnu-gcc 8.3.0 gave different results whether literals or variables with same values as literals were used. GENMASK with literals -1 and 0 gives zero and with variables gives 0xFFFFFFFFFFFFFFF (~0UL). Because nkmp driver uses GENMASK with variables as parameter, expression calculates mask as ~0UL instead of 0. This has further consequences that LSB in register is always set to 1 (1 is neutral value for a factor and shift is 0). For example, H6 pll-de clock is set to 600 MHz by sun4i-drm driver, but due to this bug ends up being 300 MHz. Additionally, 300 MHz seems to be too low because following warning can be found in dmesg: [ 1.752763] WARNING: CPU: 2 PID: 41 at drivers/clk/sunxi-ng/ccu_common.c:41 ccu_helper_wait_for_lock.part.0+0x6c/0x90 [ 1.763378] Modules linked in: [ 1.766441] CPU: 2 PID: 41 Comm: kworker/2:1 Not tainted 5.1.0-rc2-next-20190401 #138 [ 1.774269] Hardware name: Pine H64 (DT) [ 1.778200] Workqueue: events deferred_probe_work_func [ 1.783341] pstate: 40000005 (nZcv daif -PAN -UAO) [ 1.788135] pc : ccu_helper_wait_for_lock.part.0+0x6c/0x90 [ 1.793623] lr : ccu_helper_wait_for_lock.part.0+0x48/0x90 [ 1.799107] sp : ffff000010f93840 [ 1.802422] x29: ffff000010f93840 x28: 0000000000000000 [ 1.807735] x27: ffff800073ce9d80 x26: ffff000010afd1b8 [ 1.813049] x25: ffffffffffffffff x24: 00000000ffffffff [ 1.818362] x23: 0000000000000001 x22: ffff000010abd5c8 [ 1.823675] x21: 0000000010000000 x20: 00000000685f367e [ 1.828987] x19: 0000000000001801 x18: 0000000000000001 [ 1.834300] x17: 0000000000000001 x16: 0000000000000000 [ 1.839613] x15: 0000000000000000 x14: ffff000010789858 [ 1.844926] x13: 0000000000000000 x12: 0000000000000001 [ 1.850239] x11: 0000000000000000 x10: 0000000000000970 [ 1.855551] x9 : ffff000010f936c0 x8 : ffff800074cec0d0 [ 1.860864] x7 : 0000800067117000 x6 : 0000000115c30b41 [ 1.866177] x5 : 00ffffffffffffff x4 : 002c959300bfe500 [ 1.871490] x3 : 0000000000000018 x2 : 0000000029aaaaab [ 1.876802] x1 : 00000000000002e6 x0 : 00000000686072bc [ 1.882114] Call trace: [ 1.884565] ccu_helper_wait_for_lock.part.0+0x6c/0x90 [ 1.889705] ccu_helper_wait_for_lock+0x10/0x20 [ 1.894236] ccu_nkmp_set_rate+0x244/0x2a8 [ 1.898334] clk_change_rate+0x144/0x290 [ 1.902258] clk_core_set_rate_nolock+0x180/0x1b8 [ 1.906963] clk_set_rate+0x34/0xa0 [ 1.910455] sun8i_mixer_bind+0x484/0x558 [ 1.914466] component_bind_all+0x10c/0x230 [ 1.918651] sun4i_drv_bind+0xc4/0x1a0 [ 1.922401] try_to_bring_up_master+0x164/0x1c0 [ 1.926932] __component_add+0xa0/0x168 [ 1.930769] component_add+0x10/0x18 [ 1.934346] sun8i_dw_hdmi_probe+0x18/0x20 [ 1.938443] platform_drv_probe+0x50/0xa0 [ 1.942455] really_probe+0xcc/0x280 [ 1.946032] driver_probe_device+0x54/0xe8 [ 1.950130] __device_attach_driver+0x80/0xb8 [ 1.954488] bus_for_each_drv+0x78/0xc8 [ 1.958326] __device_attach+0xd4/0x130 [ 1.962163] device_initial_probe+0x10/0x18 [ 1.966348] bus_probe_device+0x90/0x98 [ 1.970185] deferred_probe_work_func+0x6c/0xa0 [ 1.974720] process_one_work+0x1e0/0x320 [ 1.978732] worker_thread+0x228/0x428 [ 1.982484] kthread+0x120/0x128 [ 1.985714] ret_from_fork+0x10/0x18 [ 1.989290] ---[ end trace 9babd42e1ca4b84f ]--- This commit solves the issue by first checking value of the factor width. If it is equal to 0 (unused factor), mask is set to 0, otherwise GENMASK() macro is used as before. Fixes: d897ef56faf9 ("clk: sunxi-ng: Mask nkmp factors when setting register") Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 2abc330c514fe56c570bb1a6318b054b06a4f72e ]

Sometimes one of the nkmp factors is unused. This means that one of the
factors shift and width values are set to 0. Current nkmp clock code
generates a mask for each factor with GENMASK(width + shift - 1, shift).
For unused factor this translates to GENMASK(-1, 0). This code is
further expanded by C preprocessor to final version:
(((~0UL) - (1UL << (0)) + 1) & (~0UL >> (BITS_PER_LONG - 1 - (-1))))
or a bit simplified:
(~0UL & (~0UL >> BITS_PER_LONG))

It turns out that result of the second part (~0UL >> BITS_PER_LONG) is
actually undefined by C standard, which clearly specifies:

"If the value of the right operand is negative or is greater than or
equal to the width of the promoted left operand, the behavior is
undefined."

Additionally, compiling kernel with aarch64-linux-gnu-gcc 8.3.0 gave
different results whether literals or variables with same values as
literals were used. GENMASK with literals -1 and 0 gives zero and with
variables gives 0xFFFFFFFFFFFFFFF (~0UL). Because nkmp driver uses
GENMASK with variables as parameter, expression calculates mask as ~0UL
instead of 0. This has further consequences that LSB in register is
always set to 1 (1 is neutral value for a factor and shift is 0).

For example, H6 pll-de clock is set to 600 MHz by sun4i-drm driver, but
due to this bug ends up being 300 MHz. Additionally, 300 MHz seems to be
too low because following warning can be found in dmesg:

[    1.752763] WARNING: CPU: 2 PID: 41 at drivers/clk/sunxi-ng/ccu_common.c:41 ccu_helper_wait_for_lock.part.0+0x6c/0x90
[    1.763378] Modules linked in:
[    1.766441] CPU: 2 PID: 41 Comm: kworker/2:1 Not tainted 5.1.0-rc2-next-20190401 #138
[    1.774269] Hardware name: Pine H64 (DT)
[    1.778200] Workqueue: events deferred_probe_work_func
[    1.783341] pstate: 40000005 (nZcv daif -PAN -UAO)
[    1.788135] pc : ccu_helper_wait_for_lock.part.0+0x6c/0x90
[    1.793623] lr : ccu_helper_wait_for_lock.part.0+0x48/0x90
[    1.799107] sp : ffff000010f93840
[    1.802422] x29: ffff000010f93840 x28: 0000000000000000
[    1.807735] x27: ffff800073ce9d80 x26: ffff000010afd1b8
[    1.813049] x25: ffffffffffffffff x24: 00000000ffffffff
[    1.818362] x23: 0000000000000001 x22: ffff000010abd5c8
[    1.823675] x21: 0000000010000000 x20: 00000000685f367e
[    1.828987] x19: 0000000000001801 x18: 0000000000000001
[    1.834300] x17: 0000000000000001 x16: 0000000000000000
[    1.839613] x15: 0000000000000000 x14: ffff000010789858
[    1.844926] x13: 0000000000000000 x12: 0000000000000001
[    1.850239] x11: 0000000000000000 x10: 0000000000000970
[    1.855551] x9 : ffff000010f936c0 x8 : ffff800074cec0d0
[    1.860864] x7 : 0000800067117000 x6 : 0000000115c30b41
[    1.866177] x5 : 00ffffffffffffff x4 : 002c959300bfe500
[    1.871490] x3 : 0000000000000018 x2 : 0000000029aaaaab
[    1.876802] x1 : 00000000000002e6 x0 : 00000000686072bc
[    1.882114] Call trace:
[    1.884565]  ccu_helper_wait_for_lock.part.0+0x6c/0x90
[    1.889705]  ccu_helper_wait_for_lock+0x10/0x20
[    1.894236]  ccu_nkmp_set_rate+0x244/0x2a8
[    1.898334]  clk_change_rate+0x144/0x290
[    1.902258]  clk_core_set_rate_nolock+0x180/0x1b8
[    1.906963]  clk_set_rate+0x34/0xa0
[    1.910455]  sun8i_mixer_bind+0x484/0x558
[    1.914466]  component_bind_all+0x10c/0x230
[    1.918651]  sun4i_drv_bind+0xc4/0x1a0
[    1.922401]  try_to_bring_up_master+0x164/0x1c0
[    1.926932]  __component_add+0xa0/0x168
[    1.930769]  component_add+0x10/0x18
[    1.934346]  sun8i_dw_hdmi_probe+0x18/0x20
[    1.938443]  platform_drv_probe+0x50/0xa0
[    1.942455]  really_probe+0xcc/0x280
[    1.946032]  driver_probe_device+0x54/0xe8
[    1.950130]  __device_attach_driver+0x80/0xb8
[    1.954488]  bus_for_each_drv+0x78/0xc8
[    1.958326]  __device_attach+0xd4/0x130
[    1.962163]  device_initial_probe+0x10/0x18
[    1.966348]  bus_probe_device+0x90/0x98
[    1.970185]  deferred_probe_work_func+0x6c/0xa0
[    1.974720]  process_one_work+0x1e0/0x320
[    1.978732]  worker_thread+0x228/0x428
[    1.982484]  kthread+0x120/0x128
[    1.985714]  ret_from_fork+0x10/0x18
[    1.989290] ---[ end trace 9babd42e1ca4b84f ]---

This commit solves the issue by first checking value of the factor
width. If it is equal to 0 (unused factor), mask is set to 0, otherwise
GENMASK() macro is used as before.

Fixes: d897ef56faf9 ("clk: sunxi-ng: Mask nkmp factors when setting register")
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
clk: rockchip: fix wrong clock definitions for rk3328 2019-05-25T16:22:08+00:00 Jonas Karlman jonas@kwiboo.se 2019-03-10T12:00:45+00:00 855e2af24ab59cad0fde7ff75aedf43703974256 commit fb903392131a324a243c7731389277db1cd9f8df upstream. This patch fixes definition of several clock gate and select register that is wrong for rk3328 referring to the TRM and vendor kernel. Also use correct number of softrst registers. Fix clock definition for: - clk_crypto - aclk_h265 - pclk_h265 - aclk_h264 - hclk_h264 - aclk_axisram - aclk_gmac - aclk_usb3otg Fixes: fe3511ad8a1c ("clk: rockchip: add clock controller for rk3328") Cc: stable@vger.kernel.org Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Tested-by: Peter Geis <pgwipeout@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit fb903392131a324a243c7731389277db1cd9f8df upstream.

This patch fixes definition of several clock gate and select register
that is wrong for rk3328 referring to the TRM and vendor kernel.
Also use correct number of softrst registers.

Fix clock definition for:
- clk_crypto
- aclk_h265
- pclk_h265
- aclk_h264
- hclk_h264
- aclk_axisram
- aclk_gmac
- aclk_usb3otg

Fixes: fe3511ad8a1c ("clk: rockchip: add clock controller for rk3328")
Cc: stable@vger.kernel.org
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Tested-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
clk: mediatek: Disable tuner_en before change PLL rate 2019-05-25T16:22:08+00:00 Owen Chen owen.chen@mediatek.com 2019-03-05T05:05:38+00:00 317e574eaf6dfe7149ebc3fa0c2080a9c3f7176d commit be17ca6ac76a5cfd07cc3a0397dd05d6929fcbbb upstream. PLLs with tuner_en bit, such as APLL1, need to disable tuner_en before apply new frequency settings, or the new frequency settings (pcw) will not be applied. The tuner_en bit will be disabled during changing PLL rate and be restored after new settings applied. Fixes: e2f744a82d725 (clk: mediatek: Add MT2712 clock support) Cc: <stable@vger.kernel.org> Signed-off-by: Owen Chen <owen.chen@mediatek.com> Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com> Reviewed-by: James Liao <jamesjj.liao@mediatek.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit be17ca6ac76a5cfd07cc3a0397dd05d6929fcbbb upstream.

PLLs with tuner_en bit, such as APLL1, need to disable
tuner_en before apply new frequency settings, or the new frequency
settings (pcw) will not be applied.
The tuner_en bit will be disabled during changing PLL rate
and be restored after new settings applied.

Fixes: e2f744a82d725 (clk: mediatek: Add MT2712 clock support)
Cc: <stable@vger.kernel.org>
Signed-off-by: Owen Chen <owen.chen@mediatek.com>
Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Reviewed-by: James Liao <jamesjj.liao@mediatek.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
clk: tegra: Fix PLLM programming on Tegra124+ when PMC overrides divider 2019-05-25T16:22:07+00:00 Dmitry Osipenko digetx@gmail.com 2019-04-11T21:48:34+00:00 b5f7027a6f79b71f98525a50fb3f9639954b3b5b commit 40db569d6769ffa3864fd1b89616b1a7323568a8 upstream. There are wrongly set parenthesis in the code that are resulting in a wrong configuration being programmed for PLLM. The original fix was made by Danny Huang in the downstream kernel. The patch was tested on Nyan Big Tegra124 chromebook, PLLM rate changing works correctly now and system doesn't lock up after changing the PLLM rate due to EMC scaling. Cc: <stable@vger.kernel.org> Tested-by: Steev Klimaszewski <steev@kali.org> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-By: Peter De Schrijver <pdeschrijver@nvidia.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 40db569d6769ffa3864fd1b89616b1a7323568a8 upstream.

There are wrongly set parenthesis in the code that are resulting in a
wrong configuration being programmed for PLLM. The original fix was made
by Danny Huang in the downstream kernel. The patch was tested on Nyan Big
Tegra124 chromebook, PLLM rate changing works correctly now and system
doesn't lock up after changing the PLLM rate due to EMC scaling.

Cc: <stable@vger.kernel.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-By: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>