commit 40db569d6769ffa3864fd1b89616b1a7323568a8 upstream. There are wrongly set parenthesis in the code that are resulting in a wrong configuration being programmed for PLLM. The original fix was made by Danny Huang in the downstream kernel. The patch was tested on Nyan Big Tegra124 chromebook, PLLM rate changing works correctly now and system doesn't lock up after changing the PLLM rate due to EMC scaling. Tested-by: Steev Klimaszewski <steev@kali.org> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-By: Peter De Schrijver <pdeschrijver@nvidia.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
commit 54eff2264d3e9fd7e3987de1d7eba1d3581c631e upstream.
According to comments in code and common sense, cclk_lp uses its
own divisor, not cclk_g's.
Fixes: b08e8c0ecc42 ("clk: tegra: add clock support for Tegra30")
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Acked-By: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
commit 5e43e259171e1eee8bc074d9c44be434e685087b upstream.
The number of resets controls is 32 times the number of peripheral
register banks rather than 32 times the number of clocks. This reduces
(drastically) the number of reset controls registered from 10080 (315
clocks * 32) to 224 (6 peripheral register banks * 32).
This also fixes a potential crash because trying to use any of the
excess reset controls (224-10079) would have caused accesses beyond
the array bounds of the peripheral register banks definition array.
Cc: Peter De Schrijver <pdeschrijver@nvidia.com>
Cc: Prashant Gaikwad <pgaikwad@nvidia.com>
Fixes: 6d5b988e7dc5 ("clk: tegra: implement a reset driver")
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
PLLE fixes for 3.15
Initialize the XUSB-related clocks with appropriate parents and rates for both Tegra114 and Tegra124. Signed-off-by: Jim Lin <jilin@nvidia.com> Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
Currently the Tegra1x4 clock init code hard-codes the mux setting for xusb_hs_src and treats it as a fixed-factor clock. It is, however, a mux which can be parented by either xusb_ss_src/2 or pll_u_60M. Add the fixed-factor clock xusb_ss_div2 and put an entry in periph_clks[] for the xusb_hs_src mux. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
The parent-to-index mapping for xusb_fs_src is incorrect. Fix it by adding a mux table. Signed-off-by: Jim Lin <jilin@nvidia.com> Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
Enable hardware control of PLLE spread-spectrum, IDDQ, and enable controls when enabling PLLE. The hardware (e.g. XUSB) using PLLE will use these controls for power-saving optimizations. Signed-off-by: Jim Lin <jilin@nvidia.com> Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
The value written to PLLE_AUX was incorrect due to a wrong variable being used. Without this fix SATA does not work. Cc: stable@vger.kernel.org Signed-off-by: Tuomas Tynkkynen <ttynkkynen@nvidia.com> Tested-by: Mikko Perttunen <mperttunen@nvidia.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Mike Turquette <mturquette@linaro.org> [mturquette@linaro.org: improved changelog]