linux-stable.git/drivers/clk/qcom, branch linux-5.4.y Linux kernel stable tree clk: qcom: clk-rpmh: prevent integer overflow in recalc_rate 2025-03-13T11:43:07+00:00 Anastasia Belova abelova@astralinux.ru 2024-12-03T08:42:31+00:00 523003eb6c9420cf6026d860b420120ef5d85443 commit 89aa5925d201b90a48416784831916ca203658f9 upstream. aggr_state and unit fields are u32. The result of their multiplication may not fit in this type. Add explicit casting to prevent overflow. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 04053f4d23a4 ("clk: qcom: clk-rpmh: Add IPA clock support") Cc: stable@vger.kernel.org # 5.4+ Signed-off-by: Anastasia Belova <abelova@astralinux.ru> Link: https://lore.kernel.org/r/20241203084231.6001-1-abelova@astralinux.ru Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 89aa5925d201b90a48416784831916ca203658f9 upstream.

aggr_state and unit fields are u32. The result of their
multiplication may not fit in this type.

Add explicit casting to prevent overflow.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: 04053f4d23a4 ("clk: qcom: clk-rpmh: Add IPA clock support")
Cc: stable@vger.kernel.org # 5.4+
Signed-off-by: Anastasia Belova <abelova@astralinux.ru>
Link: https://lore.kernel.org/r/20241203084231.6001-1-abelova@astralinux.ru
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
clk: qcom: clk-alpha-pll: fix alpha mode configuration 2025-03-13T11:43:07+00:00 Gabor Juhos j4g8y7@gmail.com 2024-10-21T17:32:48+00:00 5d549136fa90ca040b382f29e142e2abfd1db77d commit 33f1722eb86e45320a3dd7b3d42f6593a1d595c2 upstream. Commit c45ae598fc16 ("clk: qcom: support for alpha mode configuration") added support for configuring alpha mode, but it seems that the feature was never working in practice. The value of the alpha_{en,mode}_mask members of the configuration gets added to the value parameter passed to the regmap_update_bits() function, however the same values are not getting applied to the bitmask. As the result, the respective bits in the USER_CTL register are never modifed which leads to improper configuration of several PLLs. The following table shows the PLL configurations where the 'alpha_en_mask' member is set and which are passed as a parameter for the clk_alpha_pll_configure() function. In the table the 'expected rate' column shows the rate the PLL should run at with the given configuration, and the 'real rate' column shows the rate the PLL runs at actually. The real rates has been verified on hardwareOn IPQ* platforms, on other platforms, those are computed values only. file pll expected rate real rate dispcc-qcm2290.c disp_cc_pll0 768.0 MHz 768.0 MHz dispcc-sm6115.c disp_cc_pll0 768.0 MHz 768.0 MHz gcc-ipq5018.c ubi32_pll 1000.0 MHz != 984.0 MHz gcc-ipq6018.c nss_crypto_pll 1200.0 MHz 1200.0 MHz gcc-ipq6018.c ubi32_pll 1497.6 MHz != 1488.0 MHz gcc-ipq8074.c nss_crypto_pll 1200.0 MHz != 1190.4 MHz gcc-qcm2290.c gpll11 532.0 MHz != 518.4 MHz gcc-qcm2290.c gpll8 533.2 MHz != 518.4 MHz gcc-qcs404.c gpll3 921.6 MHz 921.6 MHz gcc-sm6115.c gpll11 600.0 MHz != 595.2 MHz gcc-sm6115.c gpll8 800.0 MHz != 787.2 MHz gpucc-sdm660.c gpu_cc_pll0 800.0 MHz != 787.2 MHz gpucc-sdm660.c gpu_cc_pll1 740.0 MHz != 729.6 MHz gpucc-sm6115.c gpu_cc_pll0 1200.0 MHz != 1190.4 MHz gpucc-sm6115.c gpu_cc_pll1 640.0 MHz != 633.6 MHz gpucc-sm6125.c gpu_pll0 1020.0 MHz != 1017.6 MHz gpucc-sm6125.c gpu_pll1 930.0 MHz != 921.6 MHz mmcc-sdm660.c mmpll8 930.0 MHz != 921.6 MHz mmcc-sdm660.c mmpll5 825.0 MHz != 806.4 MHz As it can be seen from the above, there are several PLLs which are configured incorrectly. Change the code to apply both 'alpha_en_mask' and 'alpha_mode_mask' values to the bitmask in order to configure the alpha mode correctly. Applying the 'alpha_en_mask' fixes the initial rate of the PLLs showed in the table above. Since the 'alpha_mode_mask' is not used by any driver currently, that part of the change causes no functional changes. Cc: stable@vger.kernel.org Fixes: c45ae598fc16 ("clk: qcom: support for alpha mode configuration") Signed-off-by: Gabor Juhos <j4g8y7@gmail.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Gabor Juhos <j4g8y7@gmail.com> Link: https://lore.kernel.org/r/20241021-fix-alpha-mode-config-v1-1-f32c254e02bc@gmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 33f1722eb86e45320a3dd7b3d42f6593a1d595c2 upstream.

Commit c45ae598fc16 ("clk: qcom: support for alpha mode configuration")
added support for configuring alpha mode, but it seems that the feature
was never working in practice.

The value of the alpha_{en,mode}_mask members of the configuration gets
added to the value parameter passed to the regmap_update_bits() function,
however the same values are not getting applied to the bitmask. As the
result, the respective bits in the USER_CTL register are never modifed
which leads to improper configuration of several PLLs.

The following table shows the PLL configurations where the 'alpha_en_mask'
member is set and which are passed as a parameter for the
clk_alpha_pll_configure() function. In the table the 'expected rate' column
shows the rate the PLL should run at with the given configuration, and
the 'real rate' column shows the rate the PLL runs at actually. The real
rates has been verified on hardwareOn IPQ* platforms, on other platforms,
those are computed values only.

      file                 pll         expected rate   real rate
  dispcc-qcm2290.c     disp_cc_pll0      768.0 MHz     768.0 MHz
  dispcc-sm6115.c      disp_cc_pll0      768.0 MHz     768.0 MHz
  gcc-ipq5018.c        ubi32_pll        1000.0 MHz !=  984.0 MHz
  gcc-ipq6018.c        nss_crypto_pll   1200.0 MHz    1200.0 MHz
  gcc-ipq6018.c        ubi32_pll        1497.6 MHz != 1488.0 MHz
  gcc-ipq8074.c        nss_crypto_pll   1200.0 MHz != 1190.4 MHz
  gcc-qcm2290.c        gpll11            532.0 MHz !=  518.4 MHz
  gcc-qcm2290.c        gpll8             533.2 MHz !=  518.4 MHz
  gcc-qcs404.c         gpll3             921.6 MHz     921.6 MHz
  gcc-sm6115.c         gpll11            600.0 MHz !=  595.2 MHz
  gcc-sm6115.c         gpll8             800.0 MHz !=  787.2 MHz
  gpucc-sdm660.c       gpu_cc_pll0       800.0 MHz !=  787.2 MHz
  gpucc-sdm660.c       gpu_cc_pll1       740.0 MHz !=  729.6 MHz
  gpucc-sm6115.c       gpu_cc_pll0      1200.0 MHz != 1190.4 MHz
  gpucc-sm6115.c       gpu_cc_pll1       640.0 MHz !=  633.6 MHz
  gpucc-sm6125.c       gpu_pll0         1020.0 MHz != 1017.6 MHz
  gpucc-sm6125.c       gpu_pll1          930.0 MHz !=  921.6 MHz
  mmcc-sdm660.c        mmpll8            930.0 MHz !=  921.6 MHz
  mmcc-sdm660.c        mmpll5            825.0 MHz !=  806.4 MHz

As it can be seen from the above, there are several PLLs which are
configured incorrectly.

Change the code to apply both 'alpha_en_mask' and 'alpha_mode_mask'
values to the bitmask in order to configure the alpha mode correctly.

Applying the 'alpha_en_mask' fixes the initial rate of the PLLs showed
in the table above. Since the 'alpha_mode_mask' is not used by any driver
currently, that part of the change causes no functional changes.

Cc: stable@vger.kernel.org
Fixes: c45ae598fc16 ("clk: qcom: support for alpha mode configuration")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Gabor Juhos <j4g8y7@gmail.com>
Link: https://lore.kernel.org/r/20241021-fix-alpha-mode-config-v1-1-f32c254e02bc@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
clk: qcom: gcc-qcs404: fix initial rate of GPLL3 2024-12-14T18:44:43+00:00 Gabor Juhos j4g8y7@gmail.com 2024-10-22T09:45:56+00:00 a42d050d07b8fd15b0574175857535a116bc5072 commit 36d202241d234fa4ac50743510d098ad52bd193a upstream. The comment before the config of the GPLL3 PLL says that the PLL should run at 930 MHz. In contrary to this, calculating the frequency from the current configuration values by using 19.2 MHz as input frequency defined in 'qcs404.dtsi', it gives 921.6 MHz: $ xo=19200000; l=48; alpha=0x0; alpha_hi=0x0 $ echo "$xo * ($((l)) + $(((alpha_hi << 32 | alpha) >> 8)) / 2^32)" | bc -l 921600000.00000000000000000000 Set 'alpha_hi' in the configuration to a value used in downstream kernels [1][2] in order to get the correct output rate: $ xo=19200000; l=48; alpha=0x0; alpha_hi=0x70 $ echo "$xo * ($((l)) + $(((alpha_hi << 32 | alpha) >> 8)) / 2^32)" | bc -l 930000000.00000000000000000000 The change is based on static code analysis, compile tested only. [1] https://git.codelinaro.org/clo/la/kernel/msm-5.4/-/blob/kernel.lnx.5.4.r56-rel/drivers/clk/qcom/gcc-qcs404.c?ref_type=heads#L335 [2} https://git.codelinaro.org/clo/la/kernel/msm-5.15/-/blob/kernel.lnx.5.15.r49-rel/drivers/clk/qcom/gcc-qcs404.c?ref_type=heads#L127 Cc: stable@vger.kernel.org Fixes: 652f1813c113 ("clk: qcom: gcc: Add global clock controller driver for QCS404") Signed-off-by: Gabor Juhos <j4g8y7@gmail.com> Link: https://lore.kernel.org/r/20241022-fix-gcc-qcs404-gpll3-v1-1-c4d30d634d19@gmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 36d202241d234fa4ac50743510d098ad52bd193a upstream.

The comment before the config of the GPLL3 PLL says that the
PLL should run at 930 MHz. In contrary to this, calculating
the frequency from the current configuration values by using
19.2 MHz as input frequency defined in 'qcs404.dtsi', it gives
921.6 MHz:

  $ xo=19200000; l=48; alpha=0x0; alpha_hi=0x0
  $ echo "$xo * ($((l)) + $(((alpha_hi << 32 | alpha) >> 8)) / 2^32)" | bc -l
  921600000.00000000000000000000

Set 'alpha_hi' in the configuration to a value used in downstream
kernels [1][2] in order to get the correct output rate:

  $ xo=19200000; l=48; alpha=0x0; alpha_hi=0x70
  $ echo "$xo * ($((l)) + $(((alpha_hi << 32 | alpha) >> 8)) / 2^32)" | bc -l
  930000000.00000000000000000000

The change is based on static code analysis, compile tested only.

[1] https://git.codelinaro.org/clo/la/kernel/msm-5.4/-/blob/kernel.lnx.5.4.r56-rel/drivers/clk/qcom/gcc-qcs404.c?ref_type=heads#L335
[2} https://git.codelinaro.org/clo/la/kernel/msm-5.15/-/blob/kernel.lnx.5.15.r49-rel/drivers/clk/qcom/gcc-qcs404.c?ref_type=heads#L127

Cc: stable@vger.kernel.org
Fixes: 652f1813c113 ("clk: qcom: gcc: Add global clock controller driver for QCS404")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Link: https://lore.kernel.org/r/20241022-fix-gcc-qcs404-gpll3-v1-1-c4d30d634d19@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
clk: qcom: clk-rpmh: Fix overflow in BCM vote 2024-11-08T15:20:43+00:00 Mike Tipton quic_mdtipton@quicinc.com 2024-08-09T05:21:29+00:00 9dcff844c1cb7258bd9a6039d754566b9592d740 [ Upstream commit a4e5af27e6f6a8b0d14bc0d7eb04f4a6c7291586 ] Valid frequencies may result in BCM votes that exceed the max HW value. Set vote ceiling to BCM_TCS_CMD_VOTE_MASK to ensure the votes aren't truncated, which can result in lower frequencies than desired. Fixes: 04053f4d23a4 ("clk: qcom: clk-rpmh: Add IPA clock support") Cc: stable@vger.kernel.org Signed-off-by: Mike Tipton <quic_mdtipton@quicinc.com> Reviewed-by: Taniya Das <quic_tdas@quicinc.com> Signed-off-by: Imran Shaik <quic_imrashai@quicinc.com> Link: https://lore.kernel.org/r/20240809-clk-rpmh-bcm-vote-fix-v2-1-240c584b7ef9@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit a4e5af27e6f6a8b0d14bc0d7eb04f4a6c7291586 ]

Valid frequencies may result in BCM votes that exceed the max HW value.
Set vote ceiling to BCM_TCS_CMD_VOTE_MASK to ensure the votes aren't
truncated, which can result in lower frequencies than desired.

Fixes: 04053f4d23a4 ("clk: qcom: clk-rpmh: Add IPA clock support")
Cc: stable@vger.kernel.org
Signed-off-by: Mike Tipton <quic_mdtipton@quicinc.com>
Reviewed-by: Taniya Das <quic_tdas@quicinc.com>
Signed-off-by: Imran Shaik <quic_imrashai@quicinc.com>
Link: https://lore.kernel.org/r/20240809-clk-rpmh-bcm-vote-fix-v2-1-240c584b7ef9@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
clk: qcom: rpmh: Simplify clk_rpmh_bcm_send_cmd() 2024-11-08T15:20:43+00:00 Stephen Boyd sboyd@kernel.org 2020-03-09T22:12:31+00:00 997526f85bc95a9ebf21aabf8df6dcb610db97d1 [ Upstream commit 2cf7a4cbcb4e108aae666dc6a81cedf69e1cba37 ] This function has some duplication in unlocking a mutex and returns in a few different places. Let's use some if statements to consolidate code and make this a bit easier to read. Cc: Bjorn Andersson <bjorn.andersson@linaro.org> CC: Taniya Das <tdas@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lkml.kernel.org/r/20200309221232.145630-2-sboyd@kernel.org Stable-dep-of: a4e5af27e6f6 ("clk: qcom: clk-rpmh: Fix overflow in BCM vote") Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 2cf7a4cbcb4e108aae666dc6a81cedf69e1cba37 ]

This function has some duplication in unlocking a mutex and returns in a
few different places. Let's use some if statements to consolidate code
and make this a bit easier to read.

Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
CC: Taniya Das <tdas@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lkml.kernel.org/r/20200309221232.145630-2-sboyd@kernel.org
Stable-dep-of: a4e5af27e6f6 ("clk: qcom: clk-rpmh: Fix overflow in BCM vote")
Signed-off-by: Sasha Levin <sashal@kernel.org>
clk: qcom: clk-alpha-pll: Fix the trion pll postdiv set rate API 2024-09-12T09:03:51+00:00 Satya Priya Kakitapalli quic_skakitap@quicinc.com 2024-07-31T06:29:10+00:00 0af2a13a37c91f21a41d11d4003fd138d9bde9ae commit 4ad1ed6ef27cab94888bb3c740c14042d5c0dff2 upstream. Correct the pll postdiv shift used in clk_trion_pll_postdiv_set_rate API. The shift value is not same for different types of plls and should be taken from the pll's .post_div_shift member. Fixes: 548a909597d5 ("clk: qcom: clk-alpha-pll: Add support for Trion PLLs") Cc: stable@vger.kernel.org Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20240731062916.2680823-3-quic_skakitap@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 4ad1ed6ef27cab94888bb3c740c14042d5c0dff2 upstream.

Correct the pll postdiv shift used in clk_trion_pll_postdiv_set_rate
API. The shift value is not same for different types of plls and
should be taken from the pll's .post_div_shift member.

Fixes: 548a909597d5 ("clk: qcom: clk-alpha-pll: Add support for Trion PLLs")
Cc: stable@vger.kernel.org
Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240731062916.2680823-3-quic_skakitap@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
clk: qcom: clk-alpha-pll: Fix the pll post div mask 2024-09-12T09:03:51+00:00 Satya Priya Kakitapalli quic_skakitap@quicinc.com 2024-07-31T06:29:09+00:00 2464ec897f6c641ea4ff7b95035eae72c6bc668e commit 2c4553e6c485a96b5d86989eb9654bf20e51e6dd upstream. The PLL_POST_DIV_MASK should be 0 to (width - 1) bits. Fix it. Fixes: 1c3541145cbf ("clk: qcom: support for 2 bit PLL post divider") Cc: stable@vger.kernel.org Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com> Link: https://lore.kernel.org/r/20240731062916.2680823-2-quic_skakitap@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 2c4553e6c485a96b5d86989eb9654bf20e51e6dd upstream.

The PLL_POST_DIV_MASK should be 0 to (width - 1) bits. Fix it.

Fixes: 1c3541145cbf ("clk: qcom: support for 2 bit PLL post divider")
Cc: stable@vger.kernel.org
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
Link: https://lore.kernel.org/r/20240731062916.2680823-2-quic_skakitap@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
clk: qcom: mmcc-msm8974: fix terminating of frequency table arrays 2024-04-13T10:51:24+00:00 Gabor Juhos j4g8y7@gmail.com 2024-02-29T18:07:52+00:00 86bf75d9158f511db7530bc82a84b19a5134d089 [ Upstream commit e2c02a85bf53ae86d79b5fccf0a75ac0b78e0c96 ] The frequency table arrays are supposed to be terminated with an empty element. Add such entry to the end of the arrays where it is missing in order to avoid possible out-of-bound access when the table is traversed by functions like qcom_find_freq() or qcom_find_freq_floor(). Only compile tested. Fixes: d8b212014e69 ("clk: qcom: Add support for MSM8974's multimedia clock controller (MMCC)") Signed-off-by: Gabor Juhos <j4g8y7@gmail.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240229-freq-table-terminator-v1-7-074334f0905c@gmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit e2c02a85bf53ae86d79b5fccf0a75ac0b78e0c96 ]

The frequency table arrays are supposed to be terminated with an
empty element. Add such entry to the end of the arrays where it
is missing in order to avoid possible out-of-bound access when
the table is traversed by functions like qcom_find_freq() or
qcom_find_freq_floor().

Only compile tested.

Fixes: d8b212014e69 ("clk: qcom: Add support for MSM8974's multimedia clock controller (MMCC)")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240229-freq-table-terminator-v1-7-074334f0905c@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
clk: qcom: mmcc-apq8084: fix terminating of frequency table arrays 2024-04-13T10:51:24+00:00 Gabor Juhos j4g8y7@gmail.com 2024-02-29T18:07:51+00:00 b2dfb216f32627c2f6a8041f2d9d56d102ab87c0 [ Upstream commit a903cfd38d8dee7e754fb89fd1bebed99e28003d ] The frequency table arrays are supposed to be terminated with an empty element. Add such entry to the end of the arrays where it is missing in order to avoid possible out-of-bound access when the table is traversed by functions like qcom_find_freq() or qcom_find_freq_floor(). Only compile tested. Fixes: 2b46cd23a5a2 ("clk: qcom: Add APQ8084 Multimedia Clock Controller (MMCC) support") Signed-off-by: Gabor Juhos <j4g8y7@gmail.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240229-freq-table-terminator-v1-6-074334f0905c@gmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit a903cfd38d8dee7e754fb89fd1bebed99e28003d ]

The frequency table arrays are supposed to be terminated with an
empty element. Add such entry to the end of the arrays where it
is missing in order to avoid possible out-of-bound access when
the table is traversed by functions like qcom_find_freq() or
qcom_find_freq_floor().

Only compile tested.

Fixes: 2b46cd23a5a2 ("clk: qcom: Add APQ8084 Multimedia Clock Controller (MMCC) support")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240229-freq-table-terminator-v1-6-074334f0905c@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
clk: qcom: gcc-ipq8074: fix terminating of frequency table arrays 2024-04-13T10:51:24+00:00 Gabor Juhos j4g8y7@gmail.com 2024-02-29T18:07:48+00:00 83fe1bbd9e259ad109827ccfbfc2488e0dea8e94 [ Upstream commit 1040ef5ed95d6fd2628bad387d78a61633e09429 ] The frequency table arrays are supposed to be terminated with an empty element. Add such entry to the end of the arrays where it is missing in order to avoid possible out-of-bound access when the table is traversed by functions like qcom_find_freq() or qcom_find_freq_floor(). Only compile tested. Fixes: 9607f6224b39 ("clk: qcom: ipq8074: add PCIE, USB and SDCC clocks") Signed-off-by: Gabor Juhos <j4g8y7@gmail.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240229-freq-table-terminator-v1-3-074334f0905c@gmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 1040ef5ed95d6fd2628bad387d78a61633e09429 ]

The frequency table arrays are supposed to be terminated with an
empty element. Add such entry to the end of the arrays where it
is missing in order to avoid possible out-of-bound access when
the table is traversed by functions like qcom_find_freq() or
qcom_find_freq_floor().

Only compile tested.

Fixes: 9607f6224b39 ("clk: qcom: ipq8074: add PCIE, USB and SDCC clocks")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240229-freq-table-terminator-v1-3-074334f0905c@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>