Pull ARM SoC updates for Marvell mvebu/kirkwood from Olof Johansson:
 "This is a branch with updates for Marvell's mvebu/kirkwood platforms.
  They came in late-ish, and were heavily interdependent such that it
  didn't make sense to split them up across the cross-platform topic
  branches.  So here they are (for the second release in a row) in a
  branch on their own."

* tag 'mvebu' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (88 commits)
  arm: l2x0: add aurora related properties to OF binding
  arm: mvebu: add Aurora L2 Cache Controller to the DT
  arm: mvebu: add L2 cache support
  dma: mv_xor: fix error handling path
  dma: mv_xor: fix error checking of irq_of_parse_and_map()
  dma: mv_xor: use request_irq() instead of devm_request_irq()
  dma: mv_xor: clear the window override control registers
  arm: mvebu: fix address decoding armada_cfg_base() function
  ARM: mvebu: update defconfig with I2C and RTC support
  ARM: mvebu: Add SATA support for OpenBlocks AX3-4
  ARM: mvebu: Add support for the RTC in OpenBlocks AX3-4
  ARM: mvebu: Add support for I2C on OpenBlocks AX3-4
  ARM: mvebu: Add support for I2C controllers in Armada 370/XP
  arm: mvebu: Add hardware I/O Coherency support
  arm: plat-orion: Add coherency attribute when setup mbus target
  arm: dma mapping: Export a dma ops function arm_dma_set_mask
  arm: mvebu: Add SMP support for Armada XP
  arm: mm: Add support for PJ4B cpu and init routines
  arm: mvebu: Add IPI support via doorbells
  arm: mvebu: Add initial support for power managmement service unit
  ...

Pull ARM SoC device tree conversions and enablement from Olof Johansson:
 "Continued device tree conversion and enablement across a number of
  platforms; Kirkwood, tegra, i.MX, Exynos, zynq and a couple of other
  smaller series as well.

  ux500 has seen continued conversion for platforms.  Several platforms
  have seen pinctrl-via-devicetree conversions for simpler
  multiplatform.  Tegra is adding data for new devices/drivers, and
  Exynos has a bunch of new bindings and devices added as well.

  So, pretty much the same progression in the right direction as the
  last few releases."

Fix up conflicts as per Olof.

* tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (185 commits)
  ARM: ux500: Rename dbx500 cpufreq code to be more generic
  ARM: dts: add missing ux500 device trees
  ARM: ux500: Stop registering the PCM driver from platform code
  ARM: ux500: Move board specific GPIO info out to subordinate DTS files
  ARM: ux500: Disable the MMCI gpio-regulator by default
  ARM: Kirkwood: remove kirkwood_ehci_init() from new boards
  ARM: Kirkwood: Add support LED of OpenBlocks A6
  ARM: Kirkwood: Convert to EHCI via DT for OpenBlocks A6
  ARM: kirkwood: Add NAND partiton map for OpenBlocks A6
  ARM: kirkwood: Add support second I2C bus and RTC on OpenBlocks A6
  ARM: kirkwood: Add support DT of second I2C bus
  ARM: kirkwood: Convert mplcec4 board to pinctrl
  ARM: Kirkwood: Convert km_kirkwood to pinctrl
  ARM: Kirkwood: support 98DX412x kirkwoods with pinctrl
  ARM: Kirkwood: Convert IX2-200 to pinctrl.
  ARM: Kirkwood: Convert lsxl boards to pinctrl.
  ARM: Kirkwood: Convert ib62x0 to pinctrl.
  ARM: Kirkwood: Convert GoFlex Net to pinctrl.
  ARM: Kirkwood: Convert dreamplug to pinctrl.
  ARM: Kirkwood: Convert dockstar to pinctrl.
  ...

From Mike Turquette:
* depends/clk:
  clk: Common clocks implementation for Versatile Express
  clk: Versatile Express clock generators ("osc") driver
  CLK: clk-twl6040: Initial clock driver for OMAP4+ McPDM fclk clock
  clk: fix return value check in sirfsoc_of_clk_init()
  clk: fix return value check in of_fixed_clk_setup()
  clk: ux500: Update sdmmc clock to 100MHz for u8500
  clk: ux500: Support prcmu ape opp voltage clock
  mfd: dbx500: Export prmcu_request_ape_opp_100_voltage
  clk: Don't return negative numbers for unsigned values with !clk
  clk: Fix documentation typos
  clk: Document .is_enabled op
  clk: SPEAr: Vco-pll: Fix compilation warning

This driver allows to provide DT clocks for core clocks found on
Marvell Kirkwood, Dove & 370/XP SoCs. The core clock frequencies and
ratios are determined by decoding the Sample-At-Reset registers.

Although technically correct, using a divider of 0 will lead to
div_by_zero panic. Let's use a ratio of 0/1 instead to fail later
with a zero clock.

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by Gregory CLEMENT <gregory.clement@free-electrons.com>

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Mike Turquette <mturquette@ti.com>

Make the Zynq platform use the newly created zynq clk bindings.

Signed-off-by: Josh Cartwright <josh.cartwright@ni.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>

On OMAP4+ platforms the functional clock for the McPDM IP is suplied by
the twl6040 codec (bit clock on the PDM bus).
This common clock driver for twl6040 will register the mcpdm_fclk clock to
be used by the McPDM driver to make sure that the needed clocks are
available when needed.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>

Pull ARM soc device tree updates from Olof Johansson:
 "Device tree conversion and enablement branch.  Mostly a bunch of new
  bindings and setup for various platforms, but the Via/Winchip VT8500
  platform is also converted over from being 100% legacy to now use
  device tree for probing.  More of that will come for 3.8."

Trivial conflicts due to removal of vt8500 files, and one documentation
file that was added with slightly different contents both here and in
the USb tree.

* tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (212 commits)
  arm: vt8500: Fixup for missing gpio.h
  ARM: LPC32xx: LED fix in PHY3250 DTS file
  ARM: dt: mmp-dma: add binding file
  arm: vt8500: Update arch-vt8500 to devicetree support.
  arm: vt8500: gpio: Devicetree support for arch-vt8500
  arm: vt8500: doc: Add device tree bindings for arch-vt8500 devices
  arm: vt8500: clk: Add Common Clock Framework support
  video: vt8500: Add devicetree support for vt8500-fb and wm8505-fb
  serial: vt8500: Add devicetree support for vt8500-serial
  rtc: vt8500: Add devicetree support for vt8500-rtc
  arm: vt8500: Add device tree files for VIA/Wondermedia SoC's
  ARM: tegra: Add Avionic Design Tamonten Evaluation Carrier support
  ARM: tegra: Add Avionic Design Medcom-Wide support
  ARM: tegra: Add Avionic Design Plutux support
  ARM: tegra: Add Avionic Design Tamonten support
  ARM: tegra: dts: Add pwm label
  ARM: ux500: Fix SSP register address format
  ARM: ux500: Apply tc3589x's GPIO/IRQ properties to HREF's DT
  ARM: ux500: Remove redundant #gpio-cell properties from Snowball DT
  ARM: ux500: Add all encompassing sound node to the HREF Device Tree
  ...

Pull ARM soc-specific updates from Olof Johansson:
 "Most notable here is probably the addition of basic support for the
  BCM2835, an SoC used in some of the Roku 2 players as well as the
  much-hyped Raspberry Pi, cleaned up and contributed by Stephen Warren.
  It's still early days on mainline support, with just the basics
  working.  But it has to start somewhere!

  Beyond that there's some conversions of clock infrastructure on tegra
  to common clock, misc updates for several other platforms, and OMAP
  now has its own bus (under drivers/bus) to manage its devices through.

  This branch adds two new directories outside of arch/arm:
  drivers/irqchip for new irq controllers, and drivers/bus for the above
  OMAP bus.  It's expected that some of the other platforms will migrate
  parts of their platforms to those directories over time as well."

Fix up trivial conflicts with the clk infrastructure changes.

* tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (62 commits)
  ARM: shmobile: add new __iomem annotation for new code
  ARM: LPC32xx: Support GPI 28
  ARM: LPC32xx: Platform update for devicetree completion of spi-pl022
  ARM: LPC32xx: Board cleanup
  irqchip: fill in empty Kconfig
  ARM: SAMSUNG: Add check for NULL in clock interface
  ARM: EXYNOS: Put PCM, Slimbus, Spdif clocks to off state
  ARM: EXYNOS: Add bus clock for FIMD
  ARM: SAMSUNG: Fix HDMI related warnings
  ARM: S3C24XX: Add .get_rate callback for "camif-upll" clock
  ARM: EXYNOS: Fix incorrect help text
  ARM: EXYNOS: Turn off clocks for NAND, OneNAND and TSI controllers
  ARM: OMAP: AM33xx hwmod: fixup SPI after platform_data move
  MAINTAINERS: add an entry for the BCM2835 ARM sub-architecture
  ARM: bcm2835: instantiate console UART
  ARM: bcm2835: add stub clock driver
  ARM: bcm2835: add system timer
  ARM: bcm2835: add interrupt controller driver
  ARM: add infra-structure for BCM2835 and Raspberry Pi
  ARM: tegra20: add CPU hotplug support
  ...

Pull clk framework update from Michael Turquette:
 "The common clk framework changes for 3.7 are dominated by ARM platform
  ports to the framework along with one MIPS port, one MFD port, one
  minor framework enhancement and one helper function for platforms
  expressing their clock data through device tree."

* tag 'clk-for-linus' of git://git.linaro.org/people/mturquette/linux:
  clk: add of_clk_src_onecell_get() support
  clk: ux500: Define smp_twd clock for u8500
  mfd: dbx500: Provide a more accurate smp_twd clock
  clk: ux500: Support for prmcu_rate clock
  clk: Provide option for clk_get_rate to issue hw for new rate
  clock: max77686: Add driver for Maxim 77686 32Khz crystal oscillator.
  ARM: ux500: Switch to use common clock framework
  clk: ux500: Clock definitions for u8500
  clk: ux500: First version of clock definitions for ux500
  clk: ux500: Adapt PRCMU and PRCC clocks for common clk
  clk: versatile: make config option boolean
  clk: add Loongson1B clock support
  arm: mmp: make all SOCs use common clock by default
  clk: mmp: add clock definition for mmp2
  clk: mmp: add clock definition for pxa910
  clk: mmp: add clock definition for pxa168
  clk: mmp: add mmp specific clocks
  clk: convert ARM RealView to common clk
  clk: prima2: move from arch/arm/mach to drivers/clk
  ARM: PRIMA2: convert to common clk and finish full clk tree