- Support for STM32F769 - Rework AT91 sckc DT bindings - Fix slow RC oscillator issue on sama5d3 - AT91 sam9x60 PMC support - SiFive FU540 PRCI and PLL support * clk-stm32f4: clk: stm32mp1: Add ddrperfm clock clk: stm32: Introduce clocks of STM32F769 board * clk-tegra: clk: tegra: divider: Mark Memory Controller clock as read-only clk: tegra: emc: Replace BUG() with WARN_ONCE() clk: tegra: emc: Fix EMC max-rate clamping clk: tegra: emc: Support multiple RAM codes clk: tegra: emc: Don't enable EMC clock manually clk: tegra124: Remove lock-enable bit from PLLM clk: tegra: Fix PLLM programming on Tegra124+ when PMC overrides divider clk: tegra: Don't enable already enabled PLLs * clk-at91: clk: at91: Mark struct clk_range as const clk: at91: add sam9x60 pmc driver dt-bindings: clk: at91: add bindings for SAM9X60 pmc clk: at91: add sam9x60 PLL driver clk: at91: master: Add sam9x60 support clk: at91: usb: Add sam9x60 support clk: at91: allow configuring generated PCR layout clk: at91: allow configuring peripheral PCR layout clk: at91: sckc: handle different RC startup time clk: at91: modernize sckc binding dt-bindings: clock: at91: new sckc bindings * clk-sifive-fu540: clk: sifive: add a driver for the SiFive FU540 PRCI IP block clk: analogbits: add Wide-Range PLL library dt-bindings: clk: add documentation for the SiFive PRCI driver * clk-spdx: clk: sunxi-ng: Use the correct style for SPDX License Identifier clk: sprd: Use the correct style for SPDX License Identifier clk: renesas: Use the correct style for SPDX License Identifier clk: qcom: Use the correct style for SPDX License Identifier clk: davinci: Use the correct style for SPDX License Identifier clk: actions: Use the correct style for SPDX License Identifier
- Mark UFS clk as critical on Hi-Silicon hi3660 SoCs - Support for Cirrus Logic Lochnagar clks * clk-hisi: clk: hi3660: Mark clk_gate_ufs_subsys as critical * clk-lochnagar: clk: lochnagar: Add support for the Cirrus Logic Lochnagar clk: lochnagar: Add initial binding documentation * clk-allwinner: clk: sunxi-ng: sun5i: Export the MBUS clock clk: sunxi-ng: a83t: Add pll-video0 as parent of csi-mclk clk: sunxi-ng: h6: Allow video & vpu clocks to change parent rate clk: sunxi-ng: h6: Preset hdmi-cec clock parent clk: sunxi: Add Kconfig options clk: sunxi-ng: f1c100s: fix USB PHY gate bit offset clk: sunxi-ng: Allow DE clock to set parent rate * clk-rockchip: clk: rockchip: undo several noc and special clocks as critical on rk3288 clk: rockchip: add a COMPOSITE_DIV_OFFSET clock-type clk: rockchip: Turn on "aclk_dmac1" for suspend on rk3288 clk: rockchip: Limit use of USB PHY clock to USB on rk3288 clk: rockchip: Fix video codec clocks on rk3288 clk: rockchip: Make rkpwm a critical clock on rk3288 clk: rockchip: fix wrong clock definitions for rk3328 * clk-qoriq: clk: qoriq: increase array size of cmux_to_group dt-bindings: qoriq-clock: Add ls1028a chip compatible string clk: qoriq: Add ls1028a clock configuration clk: qoriq: add more PLL divider clocks support dt-bindings: qoriq-clock: add more PLL divider clocks support
Add driver code for the SiFive FU540 PRCI IP block. This IP block handles reset and clock control for the SiFive FU540 device and implements SoC-level clock tree controls and dividers. Based on code written by Wesley Terpstra <wesley@sifive.com>: https://github.com/riscv/riscv-linux/commit/999529edf517ed75b56659d456d221b2ee56bb60 Boot and PLL rate change were tested on a SiFive HiFive Unleashed board. This version includes several changes requested by Stephen Boyd <sboyd@kernel.org>. Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Wesley W. Terpstra <wesley@sifive.com> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Megan Wachs <megan@sifive.com> Cc: linux-riscv@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: linux-clk@vger.kernel.org [sboyd@kernel.org: Fix some const and ARRAY_SIZE() issues, make makefile only descend if CLK_SIFIVE=y] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add common library code for the Analog Bits Wide-Range PLL (WRPLL) IP block, as implemented in TSMC CLN28HPC. There is no bus interface or register target associated with this PLL. This library is intended to be used by drivers for IP blocks that expose registers connected to the PLL configuration and status signals. Based on code originally written by Wesley Terpstra <wesley@sifive.com>: https://github.com/riscv/riscv-linux/commit/999529edf517ed75b56659d456d221b2ee56bb60 This version incorporates several changes requested by Stephen Boyd <sboyd@kernel.org>. Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Wesley Terpstra <wesley@sifive.com> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Megan Wachs <megan@sifive.com> Cc: linux-clk@vger.kernel.org Cc: linux-kernel@vger.kernel.org [sboyd@kernel.org: Fix some const issues] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Lochnagar is an evaluation and development board for Cirrus Logic Smart CODEC and Amp devices. It allows the connection of most Cirrus Logic devices on mini-cards, as well as allowing connection of various application processor systems to provide a full evaluation platform. This driver supports the board controller chip on the Lochnagar board. The Lochnagar can take several input clocks from the host system, provides several of its own clock sources, and provides extensive routing options for those clocks to be supplied to the attached CODEC/Amp device. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
We used to have a clock framework that isn't really used these days, except for a few clocks and/or SoCs. Most of the time, the new framework and drivers (sunxi-ng) will provide everything needed for the customer devices to operate properly. Since we're not needing it that much, it might make sense to disable those drivers, for example when we want to reduce the kernel size. Let's add options in Kconfig that can be disabled if needed, but are still on by default to keep the same features in the standard case. Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
- Various DT of_node refcount fixes - Support for fixed rate clks populated from an MMIO register - Remove clps711x driver as the board support is gone * clk-of-refcount: clk: dove: fix refcount leak in dove_clk_init() clk: mv98dx3236: fix refcount leak in mv98dx3236_clk_init() clk: armada-xp: fix refcount leak in axp_clk_init() clk: kirkwood: fix refcount leak in kirkwood_clk_init() clk: armada-370: fix refcount leak in a370_clk_init() clk: vf610: fix refcount leak in vf610_clocks_init() clk: imx7d: fix refcount leak in imx7d_clocks_init() clk: imx6sx: fix refcount leak in imx6sx_clocks_init() clk: imx6q: fix refcount leak in imx6q_clocks_init() clk: samsung: exynos4: fix refcount leak in exynos4_get_xom() clk: socfpga: fix refcount leak clk: ti: fix refcount leak in ti_dt_clocks_register() clk: qoriq: fix refcount leak in clockgen_init() clk: highbank: fix refcount leak in hb_clk_init() * clk-mmio-fixed-clock: clk: Add Fixed MMIO clock driver dt-bindings: clk: Add bindings for Fixed MMIO clock * clk-remove-clps: clk: clps711x: Remove board support * clk-socfpga-parent: clk: socfpga: Don't have get_parent for single parent ops * clk-struct-size: clk: imx: imx7ulp: use struct_size() in kzalloc()
This patch adds a driver for Fixed MMIO clock. The driver reads a clock frequency value from a single 32-bit memory mapped register and registers it as a fixed rate clock. It can be enabled with COMMON_CLK_FIXED_MMIO Kconfig option. Signed-off-by: Jan Kotas <jank@cadence.com> [sboyd@kernel.org: Make of_fixed_mmio_clk_setup() static, use clk_hw based APIs] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Commit d360b130e210f2 ("clk: imx: Make the i.MX8MQ CCM clock driver
CLK_IMX8MQ dependant") introduced this duplicate and incorrectly ordered
kconfig include.
Fixes: d360b130e210f2 ("clk: imx: Make the i.MX8MQ CCM clock driver CLK_IMX8MQ dependant")
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
- NXP i.MX7ULP SoC clock support - Support for i.MX8QXP SoC clocks - Support for NXP i.MX8MQ clock controllers * clk-imx7ulp: clk: imx: add imx7ulp clk driver clk: imx: implement new clk_hw based APIs clk: imx: make mux parent strings const dt-bindings: clock: add imx7ulp clock binding doc clk: imx: add imx7ulp composite clk support clk: imx: add pfdv2 support clk: imx: add pllv4 support clk: fractional-divider: add CLK_FRAC_DIVIDER_ZERO_BASED flag support clk: imx: add gatable clock divider support * clk-imx6-fixes: clk: imx6q: handle ENET PLL bypass clk: imx6q: optionally get CCM inputs via standard clock handles clk: imx6q: reset exclusive gates on init * clk-imx-fixes: clk: imx6q: add DCICx clocks gate clk: imx6sl: ensure MMDC CH0 handshake is bypassed clk: imx7d: remove UART1 clock setting * clk-imx8qxp: clk: imx: add imx8qxp lpcg driver clk: imx: add lpcg clock support clk: imx: add imx8qxp clk driver clk: imx: add scu clock common part clk: imx: add configuration option for mmio clks dt-bindings: clock: add imx8qxp lpcg clock binding dt-bindings: clock: imx8qxp: add SCU clock IDs firmware: imx: add pm svc headfile dt-bindings: fsl: scu: update power domain binding firmware: imx: remove resource id enums dt-bindings: imx: add scu resource id headfile * clk-imx8mq: clk: imx: Make the i.MX8MQ CCM clock driver CLK_IMX8MQ dependant clk: imx: remove redundant initialization of ret to zero clk: imx: Add SCCG PLL type clk: imx: Add fractional PLL output clock clk: imx: Add clock driver for i.MX8MQ CCM clk: imx: Add imx composite clock dt-bindings: Add binding for i.MX8MQ CCM