linux-stable.git/drivers/char, branch v4.9.313

virtio_console: eliminate anonymous module_init & module_exit

2022-04-20T07:06:43+00:00

[ Upstream commit fefb8a2a941338d871e2d83fbd65fbfa068857bd ]

Eliminate anonymous module_init() and module_exit(), which can lead to
confusion or ambiguity when reading System.map, crashes/oops/bugs,
or an initcall_debug log.

Give each of these init and exit functions unique driver-specific
names to eliminate the anonymous names.

Example 1: (System.map)
 ffffffff832fc78c t init
 ffffffff832fc79e t init
 ffffffff832fc8f8 t init

Example 2: (initcall_debug log)
 calling  init+0x0/0x12 @ 1
 initcall init+0x0/0x12 returned 0 after 15 usecs
 calling  init+0x0/0x60 @ 1
 initcall init+0x0/0x60 returned 0 after 2 usecs
 calling  init+0x0/0x9a @ 1
 initcall init+0x0/0x9a returned 0 after 74 usecs

Signed-off-by: Randy Dunlap 
Reviewed-by: Amit Shah 
Cc: virtualization@lists.linux-foundation.org
Cc: Arnd Bergmann 
Link: https://lore.kernel.org/r/20220316192010.19001-3-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin

virtio_console: break out of buf poll on remove

2022-04-20T07:06:27+00:00

[ Upstream commit 0e7174b9d5877130fec41fb4a16e0c2ee4958d44 ]

A common pattern for device reset is currently:
vdev->config->reset(vdev);
.. cleanup ..

reset prevents new interrupts from arriving and waits for interrupt
handlers to finish.

However if - as is common - the handler queues a work request which is
flushed during the cleanup stage, we have code adding buffers / trying
to get buffers while device is reset. Not good.

This was reproduced by running
	modprobe virtio_console
	modprobe -r virtio_console
in a loop.

Fix this up by calling virtio_break_device + flush before reset.

Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1786239
Signed-off-by: Michael S. Tsirkin 
Signed-off-by: Sasha Levin

char/mwave: Adjust io port register size

2022-01-27T07:47:35+00:00

[ Upstream commit f5912cc19acd7c24b2dbf65a6340bf194244f085 ]

Using MKWORD() on a byte-sized variable results in OOB read. Expand the
size of the reserved area so both MKWORD and MKBYTE continue to work
without overflow. Silences this warning on a -Warray-bounds build:

drivers/char/mwave/3780i.h:346:22: error: array subscript 'short unsigned int[0]' is partly outside array bounds of 'DSP_ISA_SLAVE_CONTROL[1]' [-Werror=array-bounds]
  346 | #define MKWORD(var) (*((unsigned short *)(&var)))
      |                     ~^~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/char/mwave/3780i.h:356:40: note: in definition of macro 'OutWordDsp'
  356 | #define OutWordDsp(index,value)   outw(value,usDspBaseIO+index)
      |                                        ^~~~~
drivers/char/mwave/3780i.c:373:41: note: in expansion of macro 'MKWORD'
  373 |         OutWordDsp(DSP_IsaSlaveControl, MKWORD(rSlaveControl));
      |                                         ^~~~~~
drivers/char/mwave/3780i.c:358:31: note: while referencing 'rSlaveControl'
  358 |         DSP_ISA_SLAVE_CONTROL rSlaveControl;
      |                               ^~~~~~~~~~~~~

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kees Cook 
Link: https://lore.kernel.org/r/20211203084206.3104326-1-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin

random: fix data race on crng init time

2022-01-27T07:47:31+00:00

commit 009ba8568be497c640cab7571f7bfd18345d7b24 upstream.

_extract_crng() does plain loads of crng->init_time and
crng_global_init_time, which causes undefined behavior if
crng_reseed() and RNDRESEEDCRNG modify these corrently.

Use READ_ONCE() and WRITE_ONCE() to make the behavior defined.

Don't fix the race on crng->init_time by protecting it with crng->lock,
since it's not a problem for duplicate reseedings to occur.  I.e., the
lockless access with READ_ONCE() is fine.

Fixes: d848e5f8e1eb ("random: add new ioctl RNDRESEEDCRNG")
Fixes: e192be9d9a30 ("random: replace non-blocking pool with a Chacha20-based CRNG")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers 
Acked-by: Paul E. McKenney 
Signed-off-by: Jason A. Donenfeld 
Signed-off-by: Greg Kroah-Hartman

random: fix data race on crng_node_pool

2022-01-27T07:47:31+00:00

commit 5d73d1e320c3fd94ea15ba5f79301da9a8bcc7de upstream.

extract_crng() and crng_backtrack_protect() load crng_node_pool with a
plain load, which causes undefined behavior if do_numa_crng_init()
modifies it concurrently.

Fix this by using READ_ONCE().  Note: as per the previous discussion
https://lore.kernel.org/lkml/20211219025139.31085-1-ebiggers@kernel.org/T/#u,
READ_ONCE() is believed to be sufficient here, and it was requested that
it be used here instead of smp_load_acquire().

Also change do_numa_crng_init() to set crng_node_pool using
cmpxchg_release() instead of mb() + cmpxchg(), as the former is
sufficient here but is more lightweight.

Fixes: 1e7f583af67b ("random: make /dev/urandom scalable for silly userspace programs")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers 
Acked-by: Paul E. McKenney 
Signed-off-by: Jason A. Donenfeld 
Signed-off-by: Greg Kroah-Hartman

parisc/agp: Annotate parisc agp init functions with __init

2021-12-22T08:05:13+00:00

[ Upstream commit 8d88382b7436551a9ebb78475c546b670790cbf6 ]

Signed-off-by: Helge Deller 
Reported-by: kernel test robot 
Signed-off-by: Sasha Levin

virtio_console: Assure used length from device is limited

2021-07-20T14:21:14+00:00

[ Upstream commit d00d8da5869a2608e97cfede094dfc5e11462a46 ]

The buf->len might come from an untrusted device. This
ensures the value would not exceed the size of the buffer
to avoid data corruption or loss.

Signed-off-by: Xie Yongji 
Acked-by: Jason Wang 
Link: https://lore.kernel.org/r/20210525125622.1203-1-xieyongji@bytedance.com
Signed-off-by: Michael S. Tsirkin 
Signed-off-by: Sasha Levin

ipmi/watchdog: Stop watchdog timer when the current action is 'none'

2021-07-20T14:21:09+00:00

commit 2253042d86f57d90a621ac2513a7a7a13afcf809 upstream.

When an IPMI watchdog timer is being stopped in ipmi_close() or
ipmi_ioctl(WDIOS_DISABLECARD), the current watchdog action is updated to
WDOG_TIMEOUT_NONE and _ipmi_set_timeout(IPMI_SET_TIMEOUT_NO_HB) is called
to install this action. The latter function ends up invoking
__ipmi_set_timeout() which makes the actual 'Set Watchdog Timer' IPMI
request.

For IPMI 1.0, this operation results in fully stopping the watchdog timer.
For IPMI >= 1.5, function __ipmi_set_timeout() always specifies the "don't
stop" flag in the prepared 'Set Watchdog Timer' IPMI request. This causes
that the watchdog timer has its action correctly updated to 'none' but the
timer continues to run. A problem is that IPMI firmware can then still log
an expiration event when the configured timeout is reached, which is
unexpected because the watchdog timer was requested to be stopped.

The patch fixes this problem by not setting the "don't stop" flag in
__ipmi_set_timeout() when the current action is WDOG_TIMEOUT_NONE which
results in stopping the watchdog timer. This makes the behaviour for
IPMI >= 1.5 consistent with IPMI 1.0. It also matches the logic in
__ipmi_heartbeat() which does not allow to reset the watchdog if the
current action is WDOG_TIMEOUT_NONE as that would start the timer.

Signed-off-by: Petr Pavlu 
Message-Id: <10a41bdc-9c99-089c-8d89-fa98ce5ea080@suse.com>
Cc: stable@vger.kernel.org
Signed-off-by: Corey Minyard 
Signed-off-by: Greg Kroah-Hartman

char: pcmcia: error out if 'num_bytes_read' is greater than 4 in set_protocol()

2021-07-20T14:21:04+00:00

[ Upstream commit 37188559c610f1b7eec83c8e448936c361c578de ]

Theoretically, it will cause index out of bounds error if
'num_bytes_read' is greater than 4. As we expect it(and was tested)
never to be greater than 4, error out if it happens.

Fixes: c1986ee9bea3 ("[PATCH] New Omnikey Cardman 4000 driver")
Signed-off-by: Yu Kuai 
Link: https://lore.kernel.org/r/20210521120617.138396-1-yukuai3@huawei.com
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin

char: hpet: add checks after calling ioremap

2021-06-03T06:23:31+00:00

[ Upstream commit b11701c933112d49b808dee01cb7ff854ba6a77a ]

The function hpet_resources() calls ioremap() two times, but in both
cases it does not check if ioremap() returned a null pointer. Fix this
by adding null pointer checks and returning an appropriate error.

Signed-off-by: Tom Seewald 
Link: https://lore.kernel.org/r/20210503115736.2104747-30-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin