linux-stable.git/drivers/char, branch v4.14.166 Linux kernel stable tree hwrng: omap3-rom - Call clk_disable_unprepare() on exit only if not idled 2019-12-31T11:36:57+00:00 Tony Lindgren tony@atomide.com 2019-09-14T21:02:56+00:00 1271cd8f220236db2cef1741eb56e22d11470d2a [ Upstream commit eaecce12f5f0d2c35d278e41e1bc4522393861ab ] When unloading omap3-rom-rng, we'll get the following: WARNING: CPU: 0 PID: 100 at drivers/clk/clk.c:948 clk_core_disable This is because the clock may be already disabled by omap3_rom_rng_idle(). Let's fix the issue by checking for rng_idle on exit. Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Adam Ford <aford173@gmail.com> Cc: Pali Rohár <pali.rohar@gmail.com> Cc: Sebastian Reichel <sre@kernel.org> Cc: Tero Kristo <t-kristo@ti.com> Fixes: 1c6b7c2108bd ("hwrng: OMAP3 ROM Random Number Generator support") Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit eaecce12f5f0d2c35d278e41e1bc4522393861ab ]

When unloading omap3-rom-rng, we'll get the following:

WARNING: CPU: 0 PID: 100 at drivers/clk/clk.c:948 clk_core_disable

This is because the clock may be already disabled by omap3_rom_rng_idle().
Let's fix the issue by checking for rng_idle on exit.

Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Adam Ford <aford173@gmail.com>
Cc: Pali Rohár <pali.rohar@gmail.com>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Tero Kristo <t-kristo@ti.com>
Fixes: 1c6b7c2108bd ("hwrng: OMAP3 ROM Random Number Generator support")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
ppdev: fix PPGETTIME/PPSETTIME ioctls 2019-12-17T19:39:39+00:00 Arnd Bergmann arnd@arndb.de 2019-11-08T20:34:30+00:00 5a963f7589ba8f2af0089608e414059196f92dd7 commit 998174042da229e2cf5841f574aba4a743e69650 upstream. Going through the uses of timeval in the user space API, I noticed two bugs in ppdev that were introduced in the y2038 conversion: * The range check was accidentally moved from ppsettime to ppgettime * On sparc64, the microseconds are in the other half of the 64-bit word. Fix both, and mark the fix for stable backports. Cc: stable@vger.kernel.org Fixes: 3b9ab374a1e6 ("ppdev: convert to y2038 safe") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20191108203435.112759-8-arnd@arndb.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 998174042da229e2cf5841f574aba4a743e69650 upstream.

Going through the uses of timeval in the user space API,
I noticed two bugs in ppdev that were introduced in the y2038
conversion:

* The range check was accidentally moved from ppsettime to
  ppgettime

* On sparc64, the microseconds are in the other half of the
  64-bit word.

Fix both, and mark the fix for stable backports.

Cc: stable@vger.kernel.org
Fixes: 3b9ab374a1e6 ("ppdev: convert to y2038 safe")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20191108203435.112759-8-arnd@arndb.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
hwrng: omap - Fix RNG wait loop timeout 2019-12-17T19:39:24+00:00 Sumit Garg sumit.garg@linaro.org 2019-10-14T12:02:45+00:00 53c2427d221918fb3cc3e71a08664bc9f9132e8c commit be867f987a4e1222114dd07a01838a17c26f3fff upstream. Existing RNG data read timeout is 200us but it doesn't cover EIP76 RNG data rate which takes approx. 700us to produce 16 bytes of output data as per testing results. So configure the timeout as 1000us to also take account of lack of udelay()'s reliability. Fixes: 383212425c92 ("hwrng: omap - Add device variant for SafeXcel IP-76 found in Armada 8K") Cc: <stable@vger.kernel.org> Signed-off-by: Sumit Garg <sumit.garg@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit be867f987a4e1222114dd07a01838a17c26f3fff upstream.

Existing RNG data read timeout is 200us but it doesn't cover EIP76 RNG
data rate which takes approx. 700us to produce 16 bytes of output data
as per testing results. So configure the timeout as 1000us to also take
account of lack of udelay()'s reliability.

Fixes: 383212425c92 ("hwrng: omap - Add device variant for SafeXcel IP-76 found in Armada 8K")
Cc: <stable@vger.kernel.org>
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tpm: add check after commands attribs tab allocation 2019-12-17T19:39:13+00:00 Tadeusz Struk tadeusz.struk@intel.com 2019-10-07T21:46:37+00:00 3be0e56cd6a8ea11fd8ecfc5f52b5cc52a236213 commit f1689114acc5e89a196fec6d732dae3e48edb6ad upstream. devm_kcalloc() can fail and return NULL so we need to check for that. Cc: stable@vger.kernel.org Fixes: 58472f5cd4f6f ("tpm: validate TPM 2.0 commands") Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit f1689114acc5e89a196fec6d732dae3e48edb6ad upstream.

devm_kcalloc() can fail and return NULL so we need to check for that.

Cc: stable@vger.kernel.org
Fixes: 58472f5cd4f6f ("tpm: validate TPM 2.0 commands")
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
hwrng: stm32 - fix unbalanced pm_runtime_enable 2019-12-05T14:38:30+00:00 Lionel Debieve lionel.debieve@st.com 2019-04-01T10:30:45+00:00 934ff312e52e3dd4e547c9f6a6367410311347d0 commit af0d4442dd6813de6e77309063beb064fa8e89ae upstream. No remove function implemented yet in the driver. Without remove function, the pm_runtime implementation complains when removing and probing again the driver. Signed-off-by: Lionel Debieve <lionel.debieve@st.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit af0d4442dd6813de6e77309063beb064fa8e89ae upstream.

No remove function implemented yet in the driver.
Without remove function, the pm_runtime implementation
complains when removing and probing again the driver.

Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
virtio_console: allocate inbufs in add_port() only if it is needed 2019-12-01T08:13:14+00:00 Laurent Vivier lvivier@redhat.com 2019-11-14T12:25:48+00:00 b4c640499287ae5c19ec32998d9401165ee149f3 commit d791cfcbf98191122af70b053a21075cb450d119 upstream. When we hot unplug a virtserialport and then try to hot plug again, it fails: (qemu) chardev-add socket,id=serial0,path=/tmp/serial0,server,nowait (qemu) device_add virtserialport,bus=virtio-serial0.0,nr=2,\ chardev=serial0,id=serial0,name=serial0 (qemu) device_del serial0 (qemu) device_add virtserialport,bus=virtio-serial0.0,nr=2,\ chardev=serial0,id=serial0,name=serial0 kernel error: virtio-ports vport2p2: Error allocating inbufs qemu error: virtio-serial-bus: Guest failure in adding port 2 for device \ virtio-serial0.0 This happens because buffers for the in_vq are allocated when the port is added but are not released when the port is unplugged. They are only released when virtconsole is removed (see a7a69ec0d8e4) To avoid the problem and to be symmetric, we could allocate all the buffers in init_vqs() as they are released in remove_vqs(), but it sounds like a waste of memory. Rather than that, this patch changes add_port() logic to ignore ENOSPC error in fill_queue(), which means queue has already been filled. Fixes: a7a69ec0d8e4 ("virtio_console: free buffers after reset") Cc: mst@redhat.com Cc: stable@vger.kernel.org Signed-off-by: Laurent Vivier <lvivier@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit d791cfcbf98191122af70b053a21075cb450d119 upstream.

When we hot unplug a virtserialport and then try to hot plug again,
it fails:

(qemu) chardev-add socket,id=serial0,path=/tmp/serial0,server,nowait
(qemu) device_add virtserialport,bus=virtio-serial0.0,nr=2,\
                  chardev=serial0,id=serial0,name=serial0
(qemu) device_del serial0
(qemu) device_add virtserialport,bus=virtio-serial0.0,nr=2,\
                  chardev=serial0,id=serial0,name=serial0
kernel error:
  virtio-ports vport2p2: Error allocating inbufs
qemu error:
  virtio-serial-bus: Guest failure in adding port 2 for device \
                     virtio-serial0.0

This happens because buffers for the in_vq are allocated when the port is
added but are not released when the port is unplugged.

They are only released when virtconsole is removed (see a7a69ec0d8e4)

To avoid the problem and to be symmetric, we could allocate all the buffers
in init_vqs() as they are released in remove_vqs(), but it sounds like
a waste of memory.

Rather than that, this patch changes add_port() logic to ignore ENOSPC
error in fill_queue(), which means queue has already been filled.

Fixes: a7a69ec0d8e4 ("virtio_console: free buffers after reset")
Cc: mst@redhat.com
Cc: stable@vger.kernel.org
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ipmi:dmi: Ignore IPMI SMBIOS entries with a zero base address 2019-11-20T17:00:09+00:00 Corey Minyard cminyard@mvista.com 2018-06-21T20:32:48+00:00 8d65f82de9f4cb88c7ee8a7fe1c9112283b5e66d [ Upstream commit 1574608f5f4204440d6d9f52b971aba967664764 ] Looking at logs from systems all over the place, it looks like tons of broken systems exist that set the base address to zero. I can only guess that is some sort of non-standard idea to mark the interface as not being present. It can't be zero, anyway, so just complain and ignore it. Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 1574608f5f4204440d6d9f52b971aba967664764 ]

Looking at logs from systems all over the place, it looks like tons
of broken systems exist that set the base address to zero.  I can
only guess that is some sort of non-standard idea to mark the
interface as not being present.  It can't be zero, anyway, so just
complain and ignore it.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
ipmi_si: Only schedule continuously in the thread in maintenance mode 2019-10-07T16:54:59+00:00 Corey Minyard cminyard@mvista.com 2019-08-02T12:31:36+00:00 31f643615fe98dbe9171aba2faaa5241e2e5d8f9 [ Upstream commit 340ff31ab00bca5c15915e70ad9ada3030c98cf8 ] ipmi_thread() uses back-to-back schedule() to poll for command completion which, on some machines, can push up CPU consumption and heavily tax the scheduler locks leading to noticeable overall performance degradation. This was originally added so firmware updates through IPMI would complete in a timely manner. But we can't kill the scheduler locks for that one use case. Instead, only run schedule() continuously in maintenance mode, where firmware updates should run. Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 340ff31ab00bca5c15915e70ad9ada3030c98cf8 ]

ipmi_thread() uses back-to-back schedule() to poll for command
completion which, on some machines, can push up CPU consumption and
heavily tax the scheduler locks leading to noticeable overall
performance degradation.

This was originally added so firmware updates through IPMI would
complete in a timely manner.  But we can't kill the scheduler
locks for that one use case.

Instead, only run schedule() continuously in maintenance mode,
where firmware updates should run.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
tpm: Fix TPM 1.2 Shutdown sequence to prevent future TPM operations 2019-10-07T16:54:56+00:00 Vadim Sukhomlinov sukhomlinov@google.com 2019-10-03T18:46:23+00:00 19741180b945f776c5fe6cbb8302d4ea870b1947 commit db4d8cb9c9f2af71c4d087817160d866ed572cc9 upstream TPM 2.0 Shutdown involve sending TPM2_Shutdown to TPM chip and disabling future TPM operations. TPM 1.2 behavior was different, future TPM operations weren't disabled, causing rare issues. This patch ensures that future TPM operations are disabled. Fixes: d1bd4a792d39 ("tpm: Issue a TPM2_Shutdown for TPM2 devices.") Cc: stable@vger.kernel.org Signed-off-by: Vadim Sukhomlinov <sukhomlinov@google.com> [dianders: resolved merge conflicts with mainline] Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
commit db4d8cb9c9f2af71c4d087817160d866ed572cc9 upstream

TPM 2.0 Shutdown involve sending TPM2_Shutdown to TPM chip and disabling
future TPM operations. TPM 1.2 behavior was different, future TPM
operations weren't disabled, causing rare issues. This patch ensures
that future TPM operations are disabled.

Fixes: d1bd4a792d39 ("tpm: Issue a TPM2_Shutdown for TPM2 devices.")
Cc: stable@vger.kernel.org
Signed-off-by: Vadim Sukhomlinov <sukhomlinov@google.com>
[dianders: resolved merge conflicts with mainline]
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
tpm: use tpm_try_get_ops() in tpm-sysfs.c. 2019-10-07T16:54:56+00:00 Jarkko Sakkinen jarkko.sakkinen@linux.intel.com 2019-10-03T18:46:22+00:00 a5a497ec1a8f44f09d517215fef71dfdfce4034c commit 2677ca98ae377517930c183248221f69f771c921 upstream Use tpm_try_get_ops() in tpm-sysfs.c so that we can consider moving other decorations (locking, localities, power management for example) inside it. This direction can be of course taken only after other call sites for tpm_transmit() have been treated in the same way. Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> Tested-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com> Reviewed-by: James Bottomley <James.Bottomley@HansenPartnership.com> Tested-by: Alexander Steffen <Alexander.Steffen@infineon.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
commit 2677ca98ae377517930c183248221f69f771c921 upstream

Use tpm_try_get_ops() in tpm-sysfs.c so that we can consider moving
other decorations (locking, localities, power management for example)
inside it. This direction can be of course taken only after other call
sites for tpm_transmit() have been treated in the same way.

Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Tested-by: Alexander Steffen <Alexander.Steffen@infineon.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>