linux-stable.git/drivers/char, branch v3.12.64

x86/mm/pat, /dev/mem: Remove superfluous error message

2016-09-29T09:14:20+00:00

commit 39380b80d72723282f0ea1d1bbf2294eae45013e upstream.

Currently it's possible for broken (or malicious) userspace to flood a
kernel log indefinitely with messages a-la

	Program dmidecode tried to access /dev/mem between f0000->100000

because range_is_allowed() is case of CONFIG_STRICT_DEVMEM being turned on
dumps this information each and every time devmem_is_allowed() fails.

Reportedly userspace that is able to trigger contignuous flow of these
messages exists.

It would be possible to rate limit this message, but that'd have a
questionable value; the administrator wouldn't get information about all
the failing accessess, so then the information would be both superfluous
and incomplete at the same time :)

Returning EPERM (which is what is actually happening) is enough indication
for userspace what has happened; no need to log this particular error as
some sort of special condition.

Signed-off-by: Jiri Kosina 
Cc: Andrew Morton 
Cc: Andy Lutomirski 
Cc: Borislav Petkov 
Cc: Brian Gerst 
Cc: Denys Vlasenko 
Cc: H. Peter Anvin 
Cc: Josh Poimboeuf 
Cc: Kees Cook 
Cc: Linus Torvalds 
Cc: Luis R. Rodriguez 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Cc: Toshi Kani 
Link: http://lkml.kernel.org/r/alpine.LNX.2.00.1607081137020.24757@cbobk.fhfr.pm
Signed-off-by: Ingo Molnar 
Signed-off-by: Jiri Slaby

hwrng: exynos - Disable runtime PM on probe failure

2016-09-29T09:14:17+00:00

commit 48a61e1e2af8020f11a2b8f8dc878144477623c6 upstream.

Add proper error path (for disabling runtime PM) when registering of
hwrng fails.

Fixes: b329669ea0b5 ("hwrng: exynos - Add support for Exynos random number generator")
Signed-off-by: Krzysztof Kozlowski 
Signed-off-by: Herbert Xu 
Signed-off-by: Jiri Slaby

random: properly align get_random_int_hash

2016-08-19T07:51:15+00:00

commit b1132deac01c2332d234fa821a70022796b79182 upstream.

get_random_long() reads from the get_random_int_hash array using an
unsigned long pointer.  For this code to be guaranteed correct on all
architectures, the array must be aligned to an unsigned long boundary.

Signed-off-by: Eric Biggers 
Signed-off-by: Theodore Ts'o 
Signed-off-by: Jiri Slaby

vTPM: fix memory allocation flag for rtce buffer at kernel boot

2016-02-15T16:07:49+00:00

commit 60ecd86c4d985750efa0ea3d8610972b09951715 upstream.

At ibm vtpm initialzation, tpm_ibmvtpm_probe() registers its interrupt
handler, ibmvtpm_interrupt, which calls ibmvtpm_crq_process to allocate
memory for rtce buffer.  The current code uses 'GFP_KERNEL' as the
type of kernel memory allocation, which resulted a warning at
kernel/lockdep.c.  This patch uses 'GFP_ATOMIC' instead so that the
allocation is high-priority and does not sleep.

Signed-off-by: Hon Ching(Vicky) Lo 
Signed-off-by: Peter Huewe 
Signed-off-by: Jiri Slaby

ipmi: move timer init to before irq is setup

2016-01-25T14:15:42+00:00

commit 27f972d3e00b50639deb4cc1392afaeb08d3cecc upstream.

We encountered a panic on boot in ipmi_si on a dell per320 due to an
uninitialized timer as follows.

static int smi_start_processing(void       *send_info,
                                ipmi_smi_t intf)
{
        /* Try to claim any interrupts. */
        if (new_smi->irq_setup)
                new_smi->irq_setup(new_smi);

 --> IRQ arrives here and irq handler tries to modify uninitialized timer

    which triggers BUG_ON(!timer->function) in __mod_timer().

 Call Trace:
   
   [] start_new_msg+0x47/0x80 [ipmi_si]
   [] start_check_enables+0x4e/0x60 [ipmi_si]
   [] smi_event_handler+0x1e8/0x640 [ipmi_si]
   [] ? __rcu_process_callbacks+0x54/0x350
   [] si_irq_handler+0x3c/0x60 [ipmi_si]
   [] handle_IRQ_event+0x60/0x170
   [] handle_edge_irq+0xde/0x180
   [] handle_irq+0x49/0xa0
   [] do_IRQ+0x6c/0xf0
   [] ret_from_intr+0x0/0x11

        /* Set up the timer that drives the interface. */
        setup_timer(&new_smi->si_timer, smi_timeout, (long)new_smi);

The following patch fixes the problem.

To: Openipmi-developer@lists.sourceforge.net
To: Corey Minyard 
CC: linux-kernel@vger.kernel.org

Signed-off-by: Jan Stancek 
Signed-off-by: Tony Camuso 
Signed-off-by: Corey Minyard 
Signed-off-by: Jiri Slaby

ipmi: fix timeout calculation when bmc is disconnected

2015-08-19T06:36:51+00:00

commit e21404dc0ac7ac971c1e36274b48bb460463f4e5 upstream.

Loading ipmi_si module while bmc is disconnected, we found the timeout
is longer than 5 secs.  Actually it takes about 3 mins and 20
secs.(HZ=250)

error message as below:
  Dec 12 19:08:59 linux kernel: IPMI BT: timeout in RD_WAIT [ ] 1 retries left
  Dec 12 19:08:59 linux kernel: BT: write 4 bytes seq=0x01 03 18 00 01
  [...]
  Dec 12 19:12:19 linux kernel: IPMI BT: timeout in RD_WAIT [ ]
  Dec 12 19:12:19 linux kernel: failed 2 retries, sending error response
  Dec 12 19:12:19 linux kernel: IPMI: BT reset (takes 5 secs)
  Dec 12 19:12:19 linux kernel: IPMI BT: flag reset [ ]

Function wait_for_msg_done() use schedule_timeout_uninterruptible(1) to
sleep 1 tick, so we should subtract jiffies_to_usecs(1) instead of 100
usecs from timeout.

Reported-by: Hu Shiyuan 
Signed-off-by: Xie XiuQi 
Signed-off-by: Corey Minyard 
Signed-off-by: Linus Torvalds 
Signed-off-by: Jiri Slaby

hwrng: via-rng - Mark device ID table as __maybe_unused

2015-08-19T06:36:45+00:00

commit a44bc80e66b4014e462cb8be9d354a7bc4723b7e upstream.

It is only used in modular builds.

Reported-by: kbuild test robot 
Signed-off-by: Ben Hutchings 
Signed-off-by: Herbert Xu 
Signed-off-by: Jiri Slaby

agp/intel: Fix typo in needs_ilk_vtd_wa()

2015-08-04T14:52:35+00:00

commit 8b572a4200828b4e75cc22ed2f494b58d5372d65 upstream.

In needs_ilk_vtd_wa(), we pass in the GPU device but compared it against
the ids for the mobile GPU and the mobile host bridge. That latter is
impossible and so likely was just a typo for the desktop GPU device id
(which is also buggy).

Fixes commit da88a5f7f7d434e2cde1b3e19d952e6d84533662
Author: Chris Wilson 
Date:   Wed Feb 13 09:31:53 2013 +0000

    drm/i915: Disable WC PTE updates to w/a buggy IOMMU on ILK

Reported-by: Ting-Wei Lan 
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91127
References: https://bugzilla.freedesktop.org/show_bug.cgi?id=60391
Signed-off-by: Chris Wilson 
Cc: Daniel Vetter 
Reviewed-by: Daniel Vetter 
Signed-off-by: Jani Nikula 
Signed-off-by: Jiri Slaby

vTPM: set virtual device before passing to ibmvtpm_reset_crq

2015-08-04T14:52:21+00:00

commit 9d75f08946e8485109458ccf16f714697c207f41 upstream.

tpm_ibmvtpm_probe() calls ibmvtpm_reset_crq(ibmvtpm) without having yet
set the virtual device in the ibmvtpm structure. So in ibmvtpm_reset_crq,
the phype call contains empty unit addresses, ibmvtpm->vdev->unit_address.

Signed-off-by: Hon Ching(Vicky) Lo 
Signed-off-by: Joy Latten 
Reviewed-by: Ashley Lai 
Fixes: 132f76294744 ("drivers/char/tpm: Add new device driver to support IBM vTPM")
Signed-off-by: Peter Huewe 
Signed-off-by: Jiri Slaby

tpm/ibmvtpm: Additional LE support for tpm_ibmvtpm_send

2015-04-09T11:14:06+00:00

commit 62dfd912ab3b5405b6fe72d0135c37e9648071f1 upstream.

Problem: When IMA and VTPM are both enabled in kernel config,
kernel hangs during bootup on LE OS.

Why?: IMA calls tpm_pcr_read() which results in tpm_ibmvtpm_send
and tpm_ibmtpm_recv getting called. A trace showed that
tpm_ibmtpm_recv was hanging.

Resolution: tpm_ibmtpm_recv was hanging because tpm_ibmvtpm_send
was sending CRQ message that probably did not make much sense
to phype because of Endianness. The fix below sends correctly
converted CRQ for LE. This was not caught before because it
seems IMA is not enabled by default in kernel config and
IMA exercises this particular code path in vtpm.

Tested with IMA and VTPM enabled in kernel config and VTPM
enabled on both a BE OS and a LE OS ppc64 lpar. This exercised
CRQ and TPM command code paths in vtpm.
Patch is against Peter's tpmdd tree on github which included
Vicky's previous vtpm le patches.

Signed-off-by: Joy Latten 
Reviewed-by: Ashley Lai 
Signed-off-by: Peter Huewe 
Signed-off-by: Jiri Slaby